Extracting Khalix data to BW

Gurus,
I have two customers who want to do this so as to do all their reporting in BW. I'm thinking that DB Connect or a virtual provider is the way to go but I don't have much info about how Khalix stores the data, etc.
Any help would be appreciated.
AD

Hi,
I am not sure is csv is possible.
But definitely xls extract is possible.
-Vikram

Similar Messages

Error while extracting the data in R/3 production system,

Hi Team,
We got the following error while extracting the data in R/3 production system,
Error 7 When Sending an IDoc R3 3
No Storage space available for extending the inter 44 R3 299
No storage space available for extending the inter R3 299
Error in Source System RSM 340
Please guide us to fix the issue

It´s very difficult to help you without knowing
- what is going to be transferred
- where you get this error
- system configuration
- actual memory usage
- operating system
- database and configuration etc. etc.etc. etc.
I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
Markus

Unable to extract the data from ECC 6.0 to PSA

Hello,
I'm trying to extract the data from ECC 6.0 data source name as 2LIS_11_VAHDR into BI 7.0
When i try to load Full Load into PSA , I'm getting following error message
Error Message: "DataSource 2LIS_11_VAHDR must be activated"
Actually the data source already active , I look at the datasource using T-code LBWE it is active.
In BI on datasource(2LIS_11_VAHDR) when i right click selected "Manage" system is giving throughing below error message
"Invalid DataStore object name /BIC/B0000043: Reason: No valid entry in table RSTS"
If anybody faced this error message please advise what i'm doing wrong?
Advance thanks

ECC 6.0 side
Delete the setup tables
Fill the data into setup tables
Schedule the job
I can see the data using RSA3 (2LIS_11_VAHDR) 1000 records
BI7.0(Service Pack 15)
Replicate the datasource in Production in Backgroud
Migrate Datasource 3.5 to 7.0 in Development
I did't migrate 3.5 to 7.0 in Production it's not allowing
When i try to schedule the InfoPakage it's giving error message "Data Source is not active"
I'm sure this problem relate to Data Source 3.5 to 7.0 convertion problem in production. In Development there is no problem because manually i convert the datasource 3.5 to 7.0
Thanks

How to extract Slide data in 3rd part application from clipboard

I need to be able to copy/paste or drag/drop from PowerPoint into another application (C# WPF). In my OnDrop method the DragEventArgs Data has these formats:
        [0]   "Preferred DropEffect"   string
       [1]   "InShellDragLoop"   string
       [2]   "PowerPoint 12.0 Internal Slides"   string
       [3]   "ActiveClipBoard"   string
       [4]   "PowerPoint 14.0 Slides Package"   string
       [5]   "Embedded Object"   string
       [6]   "Link Source"   string
       [7]   "Object Descriptor"   string
       [8]   "Link Source Descriptor"   string
       [9]   "PNG"   string
       [10]   "JFIF"   string
       [11]   "GIF"   string
       [12]   "Bitmap"   string
       [13]   "System.Drawing.Bitmap"   string
       [14]   "System.Windows.Media.Imaging.BitmapSource"   string
       [15]   "EnhancedMetafile"   string
       [16]   "System.Drawing.Imaging.Metafile"   string
       [17]   "MetaFilePict"   string
       [18]   "PowerPoint 12.0 Internal Theme"   string
       [19]   "PowerPoint 12.0 Internal Color Scheme"   string
The "PowerPoint 14.0 Slides Package" is a byte array... can this be converted into Slides?
If not how would I go about getting high-resolution images + slide text from a drag/drop?
[Originally posted here: http://answers.microsoft.com/en-us/office/forum/office_2013_release-powerpoint/how-to-extract-slide-data-in-3rd-part-application/a0b5ed64-eb77-49bb-bf44-e0732e23a5eb]

What I'd like to do:
Open PowerPoint
In PPT open a presentation
In PPT select a slide
Drag it to my 3rd party WPF application
In the 3rd party WPF application drop handler get the slide data (text, background image, etc...).
When I do this I get the DragEventArgs Data (the clipboard data) and it has the 20 supported formats I listed in the 1st post. From these formats #4 seemed like it could have some useful info.
WPF
<Window x:Class="PowerPointDropSlide.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="MainWindow" Height="350" Width="525" AllowDrop="True" Drop="UIElement_OnDrop" DragOver="UIElement_OnDragOver">
<Grid HorizontalAlignment="Stretch" VerticalAlignment="Stretch" Background="LightBlue">
<TextBlock Text="Drop something here!"/>
</Grid>
</Window>
Handlers:
public void UIElement_OnDragOver(object sender, DragEventArgs e)
public void UIElement_OnDrop(object sender, DragEventArgs e)
string[] supportedFormats = e.Data.GetFormats();
object pptSlidesPackage = e.Data.GetData("PowerPoint 14.0 Slides Package");

Not able to extract performance data from .ETL file using xperf commands. getting error "Events were lost in this trace. Data may be unreliable ..."

Not able to extract performance data from .ETL file using xperf commands.
Xperf Commands:
xperf –i C:\TempFolder\Test.etl -o C:\TempFolder\BootData.csv –a process
Getting following error after executing above command:
"33288636 Events were lost
in this trace.
Data may be unreliable
This is usually caused
by insufficient disk bandwidth for ETW lo
gging.
Please try increasing the minimum
and maximum number of buffers
and/or
the buffer size.
Doubling these values would be a good first at
tempt.
Please note, though, that
this action increases the amount of me
mory
reserved
for ETW buffers, increasing memory pressure on your sce
nario.
See "xperf -help start"
for the associated command line options."
I changed page size file but its does not work for me.
Any one have idea, how to solve this problem and extract ETL file data.

I want to mention one point here. I have total 4 machines out of these 3 machines above
commands working properly. Only one machine has this problem.<o:p></o:p>
Hi,
I consider that you can try to use xperf to collect the trace etl file and see if it can be extracted on this computer:
Refer to following articles:
start
http://msdn.microsoft.com/en-us/library/windows/hardware/hh162977.aspx
Using Xperf to take a Trace (updated)
http://blogs.msdn.com/b/pigscanfly/archive/2008/02/16/using-xperf-to-take-a-trace.aspx
Kate Li
TechNet Community Support

How to extract authorization data to standart BW DSO's from SAP R/3 system

Hi All,
Does anyone have any experience about this topic? I want to use SAP R/3 as a source system and after i extracted the data to business content DSO's in BW ,i will generate authorization objects from DSO 's.
I am using standar BC DSO 's
0TCA_DS01 Authorization data - Values
 0TCA_DS02 Authorization data - Hierarchies
 0TCA_DS03 Descriptive Text Authorizations
 0TCA_DS04 Assignment User Authorizations
 0TCA_DS05 Generate users for Authorizations
I have deep research but cant find anything.
Best Regards
Ozan

Hi Ozan,
You can go though thread provided by Suman, These DSO's will help to maintain Analysis Authorizations in BW automatically In-short you don't need to maintain it, it will come from R/3 and same will be configured in BW.
Regards,
Ganesh

How to extract Inventory data from SAP R/3 system

Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?

Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK

How to extract PS data from sap r/3 to bw

Hi,
How to extract PS data from sap r/3 to bw
PS data like plans,budget,accurals&commitmnets
can any one help me regarding this..
Thanks in Advance,
Shankar.

HI sankar,
you can refer the belkow link to find the details on the relevant extractors and infoproviders
http://help.sap.com/erp2005_ehp_04/helpdata/EN/17/416d030524064cb2b8d58ffb306f3a/frameset.htm
Regards,
Sathya

How to extract meta data of documents from SAP R/3

dear all,
i`am working in aproject where we connect the documents for SAP R/3 applications.we maintain our own repository for that purpose.it may be in bound or out bound according to customer needs.the meata data related to the documents is stored in SAP.our requirement now is to have that metadata available in our repository .can any one guide me how to write ABAP code for extracting meata data from SAP and enable even nonSAP users to have the access for the documents.
thanks in advance
ravi

Hi,
One way to do this is probably set a connection between SAP Database and an external database and store the meta data into external database from where a non-sap user will have an eccess to the data.
Steps required are :
1. we have to involve basis team also in that.
2. they will make one entry
in DBCON table
(that entry will point to secondary database/external database)
(suppose the name of this secondary connection is HRCON)
3. Also they will make connection string
in application server.
4. After that,
we should have
the table definition in SAP dd dictionary
and also
the same defintion
in the external database.
5. now in abap code,
we have to use like this.
DATA: mydbcon(30) TYPE c.
mydbcon = 'HRCON'.
INSERT ydev_msg_cur CONNECTION (mydbcon)
FROM msg_cur .
<b>Hope this helps.
Please mark helpful answer.</b>
Regards,
Amit Mishra

I ran my iphone over but need to access my contacts/info/pics. I have a up to date backup of my whole phone in iTunes but need to know how to extract the data and load it to my new desktop since it will be a bit before I can afford a new phone.

I accidentally ran my iPhone over and can't afford another one for a few weeks. Until then I need to find a way to extract the data from my last backup in itunes. I can either put it on my computer or I've set up a cloud account that I was hoping could open it. So far I haven't had any luck with either. if anyone can help me out. I would love to get my pictures/videos, messages and contacts off there. The rest I don't care so much about. If someone could let me know if this is possible I would apprciate it!

Thanks. I messed up with my husbands iphone because I was told the wrong thing. Now everytime I sync his phone it makes it look just like the other phone I had. Do you know how I can fix taht for his phone? Any settings I can turn off that will prevent all of my apps/contacts, etc from auto populating his phone?

How to extract required data from a column to a flat file

my ssis package is working OK. However, I want to refine one of the column extraction.
when data is extracted to the flat file, I just want to the initials, firstname, lastname e.g.
FZ = Ben Smith, Add1, add1, etc
the only bit that i want is Ben Smith
how can i state in the package to just give me the name and exclude the rest
sukai

Add a derived column task to extract Name part alone and give expression as below
LEFT([ColumnName],FINDSTRING([ColumnName],",",1)-1)
If before SSIS 2012 use SUBSTRING
SUBSTRING([ColumnName],1,FINDSTRING([ColumnName],",",1)-1)
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to extract different date format in text file

well, iam new for using regex api(regular expression), In my project i want to extract the different format of date from the text file... date format will be 3rd june 2004, 03-06-2004, june 3rd and so on....
can any body give me regular expression to extract the date from the text file...
i will be very grateful..
kareem

date format will be 3rd june 2004, 03-06-2004, june 3rd and so on....The only way to do this (without implementing a "mind reader") is to determine in advance all the possible date formats that are possible in your input, and try to interpret each date using each of those formats until one of them passes.
It's easy enough to handle june 3rd vs 3 june vs 3rd june, but 6/3 vs 3/6, of course, is ambiguous.

How can I extract a dates column from an ascii file

I am extracting data from an ascii file and the rest of the data is extracted using read from spreadsheet, but the date appears as just the day e.g. 22 for 22nd, how can I get the date, format in ascii is e.g 22/04/2006, can I do this by specifying something at format of read from spreadsheet ? Cheers
Emily

Hi,
I found the other day that there are instructions included inside the Read From Spreadsheet vi on how to modify it slightly to read strings rather than doubles.
If you drop the Read From Spreadsheet vi onto the block diagram and double click on it, you will open the front panel for the vi. If you then select the block diagram (for Read From Spreadsheet) you will see an 'instructions' frame below the main 'code', and the 3rd paragraph tells you how to modify the VI to read the spreadsheet as a set of strings rather then doubles. Save the vi as a new filename when you've edited it or you will overwrite the existing vi!
Using the newly modified vi you can read in your entire spreadsheet, extract the dates as strings, then do any conversion necessary to the other columns of the sheet to change them into the types of value you require (eg doubles).
I hope this helps.
Mark
Applications Engineer
National Instruments

Is it possible to extract essbase data as a web service

Hi All,
I would like to know if it is possible to extract essbase data as a web service. What are the things to look for to achieve this functionality. Also request you to help me with a simple example.
Thanks for your help in advance.
Thanks,
Praveen

1)http://docs.oracle.com/cd/E26232_01/doc.11122/aps_admin.pdf
2)http://code.google.com/p/essbase-plsql-interface/downloads/list?deleted=1&ts=1331485947
3)http://essbase.ru/archives/category/performance/essbase-api/xmla

How can I extract the data from Xstring .

Hi Gurus ,
How can I extract the data from a XSTRING .
I have to get the data which is filled in the survey form the data is getting saved in form of xstring .
Someone told me that there is a standard FM for that . but I am not able to find .
Please reply with the FM in case some one knows about it .
Thanks in advance .

The following code works as of 7.0 (in any SAP system):
FORM XSTRING_TO_STRING USING input TYPE xstring CHANGING output TYPE string.
TYPES : BEGIN OF ty_struc,
          line TYPE c LENGTH 100,
        END OF ty_struc.
DATA lt_char TYPE TABLE OF ty_struc.
DATA length TYPE i.
length = xstrlen( input ) / cl_abap_char_utilities=>charsize.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
    buffer                = input
tables
    binary_tab            = lt_char.
CONCATENATE LINES OF lt_char INTO output RESPECTING BLANKS.
output = output(length).
ENDFORM.
Edited by: Sandra Rossi on Mar 30, 2010 12:24 AM

Extracting Khalix data to BW

Similar Messages

Maybe you are looking for