Extracting non-standard xem content into XEM

Hi
Has anyone tried exracting non-standard xem content into BI.
Using the delivered xem data-dump tools I am able to indentify table/field names that I believe could be used for addtional reporting in BI.
However I am unable to create an additional connection from XEM to BI. I was told that cannot use UD Connect, partly because we have no experience in setting up such a connection.
I was told I cannot use DB connect as this is not the "recommended" access method for SAP systems. But it seems to me that this would be the most straightforward. Especially as I do not have access to java/netweaver programmers that could develop anyu other methods
both XEM and BI are running on Oracle, the XME database is very small and the table structure is not very complex.
So any comments/suggestions on how to process, and whether I should push the issue of considering DB connect as aviable option?
Regards
Philip

Finally!
I'd suggest making a small change to the documentation, along the lines of:
1. Login to the Oracle Collaboration Suite Control
2. Navigate to the Content section, typically called "Content".
3. From the Administration area at the bottom of the screen, select Formats.
4. You will be presented with a list of existing formats, searchable by Name. Select New Format to create a new format, or click on an existing format to edit its properties
I think that this would increase the usability of the documentation.

Similar Messages

Standard Business Content

Hi Experts,
Can anybody out there can guide me to extract a Standard Business content in MDM.?
Points will be rewarded for stepwise helps.
Thanks in Advance.

Hi Dheeraj,
I have downloaded the SAP Standard Business content from the location :
Support Packages and Patches --> SAP NetWeaver --> SAP MDM --> SAP MDM 5.5 --> Master Data Server --> MDM BUSINESS CONTENT 5.5 --> #OS independent
And here I get a ZIP file. in this zip file there are more zip files for
1) 55610_AETICLE.zip
2) 55610_BUSINESS_PARTNER.zip
3) 55610_CUSTOMER.zip
4) 55610_EMPLOYEE.zip
5) 55610_MATERIAL.zip
6) 55610_PRODUCT.zip
7) 55610_VENDOR.zip
how can I load this into the system? I just want to load MATERIAL and PRODUCT
Kindly Help. with right answer the awards will be credited.
Pravin

BPS: how to restore modified standard planning level into orignal content l

Hi Expert,
Can you plz explain how to restore modified standard planning level into orignal content level.
Thanks
Ajay Kumar

Hi,
Please check the link. It miht help..
[Unable to View Standard Planning Functions]
Thanks
Pratyush

How To: Use FCPX to create iPhone Portrait Movies (and other non-standard formats)

Goal: Use Final Cut Pro X 10.0.7 to produce a 640x1136 video (iPhone 5 Portrait). You can use these same steps to produce virtually any dimensions you want. My example is for the iPhone 5, in Portrait mode.
This information is available in various places, but you have to realy work to find it, so I thought I'd post a step-by-step guide here.
By the way, you might think you could just create a FCPX Project with your desired dimensions, but you can't (at least with 10.0.7). Projects only support certainly dimensions. But there are other ways, as the rest of this post describes:
1) Create an initial movie with the desired dimensions, to serve as a template. We'll call it "Template.mov". The only thing that matters is the dimensions. It can be in any codec FCPX understands, and virtually any length.
I'm using a 2 second video shot on my iPhone for the template. You could also create a blank image (.png, whatever) with the proper dimensions, copy and paste it into a new Quick Time Pro 7 window, and Export it using custom settings. There's lots of different ways to do this.
2) Drop Template.mov into a FCPX event.
3) Select Template.mov in the Event browser, and select File->Duplicate (or command-D). You probably could just edit "Template.mov", but it's a good idea to save it for reuse.
3) Change the name of the copied video. I'm using "iPhone Video".
4) Right-click "iPhone Video" and select "Open in Timeline".
5) If you made the Template video from a still image, you may need to change the duration (ctrl+D). You don't have to make it very long, but it needs to be longer than 1 frame. A few seconds should be enough.
6) Use this timeline like you'd use a project's timeline. Drop in new content, trim, transition, etc. There may be things you can't do in it, but I haven't found any yet. I'm guessing Chapters may not work, but I haven't tried them.
7) Note that when you drop new content into the timeline, it may size funny. That's because the default setting for "Spacial Conform" is "Fit". Simply select the newly-dropped content, and in the Video settings inspector, scroll down to "Spacial Conform" and change it. You could use "Fill", which fills the frame vertically, or "None", which uses the source's original height. Then crop/transform/whatever to get what you want.
8) When you're ready to render, select "iPhone Video" in the Event browser, then use the "Share" button. You want to use the "Export File" destination, which you may have to add. Pick your codec, and let 'er rip.
9) When the rendering is done, you should have a video in your desired dimensions.
That's all there is to it. Hope this helps someone.
Dan
PS: Don't ask why someone would want to create an iPod video using FCPX. The point is that you may need to create a video with non-standard dimensions at some point in time, and this is how to do it.
PPS: Most of this information came from http://library.creativecow.net/articles/payton_t/FCPX_Custom-Resolution-Timeline s/video-tutorial. I just wrote it down, while I tried to do what the video suggested.

Instructions for using QuickTime Pro 7 to create a template video with unusual dimensions.
I suspect that anyone savy enough to be using FCPX has probably already figured out how to do this, either using my technique or another, so there probably isn't a real need for me to post this. For that matter, I may be the only person who cares about this at all. However, while I was trying to learn how to do all of this, I would have really appreciated having all the information in one place, so here goes.
If you want to create a video with unusual dimensions (like 640x1136) using my steps above, you'll need a "template" video first. Here's an easy way to create one, using any image editor, and QuickTime Pro 7.
1) Open QuickTime Pro 7 (QTP for short).
2) From the menu, select File->New Player. You'll get a window with just the bottom portion of the player, i.e. the playback controls.
3) Using an image editor, create a still image in the desired dimensions. You can use any image editor. It doesn't matter what the image contains (although it will end up showing as a thumbnail in FCPX).
4) Copy the image to the clipboard.
5) Switch back to QTP, and paste the image into the new player. Don't worry that there isn't a video window showing - just paste it into the window that has only playback controls. As soon as you do, the video window appears.
6) Advance to the end of the movie (the short, 1-frame movie), then hold down Command+V (paste) and keep holding it down to paste multiple images in. Watch the time advance. You could, if you want, just hold down Command+V until you get the length you want. But if you want a long video, there's an easier way:
7) When you reach a few seconds (or whatever duration your patience allows), select all (Command+A) and copy (Command+C). Then hold down Command+V to keep pasting in the longer clips. Wait until you reach a longer duration, then repeat the process. So, for example, 1 second, then 10 seconds, then 1 minute, then 10 minutes, then 1 hour. Or whatever you want.
8) Save the video however you want. I usually use File->Export with H.264, with Quality set to "Least". Just make sure you don't let it change the dimensions. If you resized the player window, depending on which "save" or "export" method you've chosen, it might default to the resized dimensions, so double check that to make sure.
That's it. You now have a template video you can use with my previous post(s).
Dan

Installing Learning Solution in HR using Standard Business Content

Hi,
I have to set up the extraction for the Learning Solutions cubes in HR into BW using the Standard Business Content.
Could someone please gide me through the process for doing it ( Step-by-Step if possible), both from the SAP R/3 side and the BW side.
Any help deeply appreciated.
Regards

the procedure is the same as i have explained to you in your previous post...
in R/3 - RSA5 - Activate DS :
Which cube are u trying to install ? There are 2 cubes :
1) Resource researvation and 2) Training management
1) Resource reservation : INSTALL THE BELOW ITEMS
Cube :0LSO_C02
Infosource : 0HR_LSO_3
Datasource : 0HR_LSO_3 AND TRANSFER RULES AND UPDATE RULES
2)tRAINING MANAGEMENT :
cUBE:0LSO_C01
INFOSOURCE:0HR_LSO_1 & 0HR_LSO_2
DATASOURCE :0HR_LSO_1 & 0HR_LSO_2
AND UPDATE RULES AND TRANSFER RULES :
pLEASE ASSIGN POINTS IF IT HELPS...
THANKS

How to convert table content into html format?

Hi,
Experts,
How to convert internal data into HTML format is there any function module or piece of code to download content into HTML.
Thank u,
Shabeer Ahmed.

Then use this code....
REPORT ytest_table_html1.
*        D A T A   D E C L A R A T I O N
*-HTML Table
DATA:
t_html TYPE STANDARD TABLE OF w3html WITH HEADER LINE,
                                       " Html Table
*- Declare Internal table and Fieldcatalog
it_flight TYPE STANDARD TABLE OF sflight WITH HEADER LINE,
                                       " Flights Details
it_fcat TYPE lvc_t_fcat WITH HEADER LINE.
                                       " Fieldcatalog
*-Variables
DATA:
v_lines TYPE i,
v_field(40).
*-Fieldsymbols
FIELD-SYMBOLS: <fs> TYPE ANY.
*        S T A R T - O F - S E L E C T I O N
START-OF-SELECTION.
SELECT *
    FROM sflight
    INTO TABLE it_flight
    UP TO 20 ROWS.
*        E N D - O F - S E L E C T I O N
END-OF-SELECTION.
*-Fill the Column headings and Properties
* Field catalog is used to populate the Headings and Values of
* The table cells dynamically
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name       = 'SFLIGHT'
    CHANGING
      ct_fieldcat            = it_fcat[]
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2.
DELETE it_fcat WHERE fieldname = 'MANDT'.
t_html-line = '<html>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<thead>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<tr>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<td><h1>Flights Details</h1></td>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '</tr>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '</thead>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<table border = "1">'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<tr>'.
APPEND t_html.
CLEAR t_html.
*-Populate HTML columns from Filedcatalog
LOOP AT it_fcat.
    CONCATENATE '<th bgcolor = "green" fgcolor = "black">'
        it_fcat-scrtext_l
        '</th>' INTO t_html-line.
    APPEND t_html.
    CLEAR t_html.
ENDLOOP.
t_html-line = '</tr>'.
APPEND t_html.
CLEAR t_html.
DESCRIBE TABLE it_fcat LINES v_lines.
*-Populate HTML table from Internal table data
LOOP AT it_flight.
    t_html-line = '<tr>'.
    APPEND t_html.
    CLEAR t_html.
*-Populate entire row of HTML table Dynamically
*-With the Help of Fieldcatalog.
    DO v_lines TIMES.
      READ TABLE it_fcat INDEX sy-index.
      CONCATENATE 'IT_FLIGHT-' it_fcat-fieldname INTO v_field.
      ASSIGN (v_field) TO <fs>.
      t_html-line = '<td>'.
      APPEND t_html.
      CLEAR t_html.
      t_html-line = <fs>.
      APPEND t_html.
      CLEAR t_html.
      t_html-line = '</td>'.
      APPEND t_html.
      CLEAR t_html.
      CLEAR v_field.
      UNASSIGN <fs>.
    ENDDO.
    t_html-line = '</tr>'.
    APPEND t_html.
    CLEAR t_html.
ENDLOOP.
t_html-line = '</table>'.
APPEND t_html.
CLEAR t_html.
*-Download the HTML into frontend
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                = 'C:\Flights.htm'
    TABLES
      data_tab                = t_html
    EXCEPTIONS
      file_write_error        = 1
      no_batch                = 2
      gui_refuse_filetransfer = 3
      invalid_type            = 4
      no_authority            = 5
      unknown_error           = 6
      header_not_allowed      = 7
      separator_not_allowed   = 8
      filesize_not_allowed    = 9
      header_too_long         = 10
      dp_error_create         = 11
      dp_error_send           = 12
      dp_error_write          = 13
      unknown_dp_error        = 14
      access_denied           = 15
      dp_out_of_memory        = 16
      disk_full               = 17
      dp_timeout              = 18
      file_not_found          = 19
      dataprovider_exception = 20
      control_flush_error     = 21
      OTHERS                  = 22.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*-Display the HTML file
CALL METHOD cl_gui_frontend_services=>execute
    EXPORTING
      document               = 'C:\Flights.htm'
      operation              = 'OPEN'
    EXCEPTIONS
      cntl_error             = 1
      error_no_gui           = 2
      bad_parameter          = 3
      file_not_found         = 4
      path_not_found         = 5
      file_extension_unknown = 6
      error_execute_failed   = 7
      synchronous_failed     = 8
      not_supported_by_gui   = 9
      OTHERS                 = 10.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
none of the above function modules r obsolete...

Parsing Non-Standard HTML Attributes

Hi, recently I have been making use of the HTMLEditorKit to parse HTML pages and extract the values of certain attributes. However, I run into problems when attempting to extract the values of non-standard html attributes since javax.swing.text.html.HTML.Attribute does not allow you to define new attributes only use its existing values. Does anyone know a way of getting values from non-standard attributes?
Thanks,
Ross

Ray.R wrote:
Hi Darin.
How have you been? Wishing you a belated Happy New Year!
I like your expression: "step away from the mouse". Very much to the point.
Thanks for the advice. I'll check out XPath.
Cheers,
RayR
Doing well, Thanks. Wishing you an early Chinese New Year. (that's going to get bleeped). [Edit: Yay, no more bleeping Chinese]
Be a little careful with XPath. Some people have been known to wrap C++ libraries to have access to XPath 2.0 and an XSLT engine for awesome search and replace capabilities. Others have been known to find ways to program XPath graphically:

Having changed my computer, how do I upload the ipod touch content into new itunes on new computer.

Having changed my computer, how do I upload the ipod touch content into new itunes on my new computer? I do not have a backup of the previous itunes library.

Transfer iTunes purchases by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
Transfer non-itunes purchased music by using one of the third-party programs discussed here:
new PC: Apple Support Communities

How can I get my non purchased song content from ipod touch 4 back to my itunes library. My library

How can I get my non purchased song content back into my itunes library from my ipod touch 4. My itunes had disappeared so I had to get another itunes & start again. I still have the original song content in the ipod.

There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

My computer crashed and once restored I could only sync purchased content. I dont want to lose my non-ITunes puchased content. What can I do?

My computer crashed and once restored I could only sync "purchased content". I dont want to lose over 500 songs. My ITunes file now only contained the "purchased content" items. My Ipod Touch still contains all the original music. HELP!! How can I download music from my IPod Touch and somehow get it into my computer (ITunes Lirbary)...... Can I down load my content to a computer that does not have ITunes installed?

See this older post from another forum member Zevoneer covering the different ways to copy content (including non-iTunes purchased content) from your iPod back to your PC.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
Yay for Sioux Falls!
B-rock

Using non-standard sshd port after 10.8 upgrade

After spending hours tracking down this solution as a result of losing my ssh settings after the upgrade to Mountain Lion, I thought it might be useful to post the steps taken to restore the configuration I used with Snow Leopard.
Changing the sshd default listening port
Disclaimer: This tutorial is specific to Mountain Lion (OS X 10.8). I was able to accomplish this using Snow Leopard (OS X 10.6) in fewer steps, but upgrading required this more involved solution.
Steps:
1.) You must first enable the root user account in order to change the relevant files. This can be done from the terminal, or by going to System Preferences --> Users & Groups. Once there, click on 'Login Options' at the bottom of the Current User list, and 'Join' where it says 'Network Account Server'.
This will bring up a smaller window. Click on 'Open Directory Utility' at the bottom. You will be prompted for your admin password. Now go to the 'Edit' tab at the top of the screen and toggle down to 'Enable Root User'. You will be prompted to enter your admin password twice.
2.) Log out of your regular user account. At the log in screen you will now see an additional entry for 'other'. Click on that and log in with the username 'root' and your admin password. If are inexperienced as a root-level user, be careful as you can cause problems to your system can be difficult to undo.
Once in your root account, the first step is to create a new 'service definition' in the etc/services file. Open the file with text editor of choice and scroll to the current entry for sshd listening port, which will look like this:
ssh    22/udp    # SSH Remote Login Protocol
ssh    22/tcp     # SSH Remote Login Protocol
Overwrite the '22' with the port number you would like sshd to listen on:
ssh    12345/udp   # SSH Remote Login Protocol
ssh    12345/tcp    # SSH Remote Login Protocol
*12345 being our hypothetical, non-standard port.
It is important to note that the new port number will not take by simply adding a new uncommented line to the file (I tried), unless of course you comment the original ssh entries. Easiest way is just to overwrite what is there already. Save changes.
3.) You now need to edit the ssh.plist file, which is located at /System/Library/LaunchDaemons/ssh.plist. A word to those familiar with Linux/BSD environments: changing the default port in the sshd_config file, which exists in OS X, does NOT change the listening port. Simply changing the default port, saving the config file, and restarting the server (the sensible way) won't work. The OS X sshd server (openssh) is configured to get launch instructions from the ssh.plist file, as opposed to sshd_config. If you are more interested in this aspect of OS X, read up on LaunchDaemons (e.g. launchd).
Before altering the ssh.plist file, you should save a backup copy in case of mistakes, or if you need to revert back to it in the future. Name your backup file something like original.ssh.plist, etc.
In the ssh.plist file, locate the SocksServiceName entry and change it from the default:
<key>SockServiceName</key>
<string>ssh</string>
To the following:
<key>SockServiceName</key>
<string>$alternate port number</string>
In our example from above this value would be 12345.
4.) Save your changes, and exit ssh.plist. You now need to move the backup file you created (original.ssh.plist) out of the System/Library/LaunchDaemons path.
The updated sshd port will not take until you have only one ssh.plist file in the LaunchDaemons directory - this has to do with how launchd is configured to load files which is outside the scope of the current discussion. (*If you've found a way around this, please share.)
5.) Restart the sshd server. Easiest way to accomplish this is going to System Preferences --> Sharing and clicking off 'Remote Login', then clicking back on it.
6.) Test the configuration by logging into the machine running the sshd server from another host using:
ssh username@ipaddress -p 12345
There are a few good tutorials out there that capture some of these steps, but many are dated and/or incomplete. If you are running a standard setup of OS X 10.8, this should work for you.
Of course, don't be fooled into thinking that changing the default listening port from the ubiquitously-probed 22 equates to actual security. At best, it will cut down on the number of dubious connection attempts and probing.

Hi all, above helped me change the sshd port number, thank you very much.
Just upgraded to OS X 10.9.3 on my macbook pro.
My findings were:
Step 1(become a root user or sudo)
Step 2 (/etc/services)
This may not be required unless you want ssh to work without the "-p XXXX" option to connect to other ssh hosts. I favor such as "ssh -p 2222 user@hostname" just to be sure I know what I am doing and also to leave ssh known port as its default "22".
Step 3 (/System/Library/LaunchDaemons/ssh.plist)
This is required if you want to change the sshd port number, I changed both "ssh" to "2222" in this file.
Step 4 (launchctl)
Below is a must as I understood:
launchctl unload /System/Library/LaunchDaemons/ssh.plist
launchctl load /System/Library/LaunchDaemons/ssh.plist
it should be already working with the new port number.
You can "ssh -p 2222 user@localhost" in the console terminal and see if its working.
Since I am no expert on MacOS X, and it is a macbook pro that I am using, I also rebooted the system and changes were reflected permanantly.
Thank you guys!

Oracle DB: How to parse XML where element names are non-standard ?

I'm in the unfortunate situation that I have illegal XML that I would like Oracle to parse. By 'illegal' in my case is that there are element names that start with an illegal character, such as a digit. Apart from this the XML is syntactically valid.
Here is an example of the XML I have stored as a column in the database:
<schedule>
    <1stweek>
    </1stweek>
    <2ndweek>
    </2ndweek>
</schedule>Right now I'm doing text search-and-replace on the XML text before I let Oracle parse it, for example replacing '<1stweek>' with '<x1stweek>' and so on. Needless to say this is very slow.
My question is if there is a way to tell the XML parser in the Oracle DB (I'm using version 10.2) to be a bit more forgiving ? ... so that it will accept element names that start with e.g. a digit ? I know that such an option exist in some XML parsers but what about Oracle's and if so how to set the option?
And before you ask I'll answer myself: No, I'm not the one who created the non-standard XML. It is from a third-party application which I cannot change myself and cannot get the vendor to change either.
Thank you.

if you cast your clob to an xmltype then you can search and extract values based on tags.
Heres an example where the table is a clob and value is cast and I'm looking for an existing attribute_name.
Check out the Oracle XML developers Guide
select u.*
FROM preload_xml
, XMLTable(
'/ApplicationProfile/ScriptFragment' PASSING xmltype(xml)
COLUMNS name varchar2(50 char) PATH '/ScriptFragment/@Name'
) u

How to remove all standard SOAP content like Content-ID:, Content-Description

Hi ,
can you please let me know how to remove standard SOAP content from messages
I am posting below text file via SOAP adapter:
POST /hapld/tos/kdwhapltos HTTP/1.1
Host: www.pld.ups.com
Content-type: multipart/mixed; boundary=BOUNDARY
Content-length: 719
--Boundary
CA12345 *qweru* wefgh*
--Boundary--
But below content automatically added into a messages even I am using don’t use SOAP envelop ,I don't want to keep all below information in my messages content
Content-ID:<[email protected]>
Content-Type:text/xml; charset=utf-8
Content-Disposition:attachment;filename="[email protected]"
Content-Description:SOAP
<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'><SOAP:Header><sap:Main xmlns:sap='http://sap.com/xi/XI/Message/30'
versionMajor='3' versionMinor='1' SOAP:mustUnderstand='1'>
<sap:MessageClass>ApplicationMessage</sap:MessageClass><sap:ProcessingMode>synchronous</sap:ProcessingMode>
<sap:MessageId>72232e3c-9d7a-11e3-a92f-00000086498a</sap:MessageId><sap:TimeSent>2014-02-24T17:38:17Z</sap:TimeSent>
<sap:Sender><sap:Party agency='http://sap.com/xi/XI' scheme='XIParty'></sap:Party><sap:Service>DE2CLNT200</sap:Service></sap:Sender>
<sap:Receiver><sap:Party agency='http://sap.com/xi/XI' scheme='XIParty'>UPS</sap:Party><sap:Service>PLD</sap:Service></sap:Receiver><sap:Interface namespace='urn:mt.com:A:FWD:Transportation'>UPSPLD_In_A</sap:Interface></sap:Main><sap:ReliableMessaging xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'><sap:QualityOfService>ExactlyOnce</sap:QualityOfService></sap:ReliableMessaging><sap:System xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'><sap:Record namespace='http://sap.com/xi/XI/Message/30/general' name='interfaceDeterminationGUID'>69e207999d7a11e3c20e00000086498b</sap:Record><sap:Record namespace='http://sap.com/xi/XI/Message/30/general' name='syncTimeout'>1200000</sap:Record><sap:Record namespace='http://sap.com/xi/XI/Message/30/general' name='senderAgreementGUID'>204a48791a5c30188698c82c7a5ac51f</sap:Record></sap:System><sap:DynamicConfiguration xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'><sap:Record namespace='http://sap.com/xi/XI/Message/30/routing' name='InterfaceDeterminationHash'>76ffb8570fb621f090b46490ec701f6a</sap:Record><sap:Record namespace='http://sap.com/xi/XI/Message/30/general' name='senderAgreementGUID'>204a48791a5c30188698c82c7a5ac51f</sap:Record></sap:DynamicConfiguration><sap:HopList xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'><sap:Hop timeStamp='2014-02-24T17:38:17Z' wasRead='false'><sap:Engine type='AE'>af.di3.ch00vdi3s</sap:Engine><sap:Adapter namespace='http://sap.com/xi/XI/System'>XIRA</sap:Adapter><sap:MessageId>72232e3c-9d7a-11e3-a92f-00000086498a</sap:MessageId></sap:Hop><sap:Hop timeStamp='2014-02-24T17:38:18Z' wasRead='false'><sap:Engine type='AE'>af.di3.ch00vdi3s</sap:Engine><sap:Adapter namespace='http://sap.com/xi/XI/System'>XIRA</sap:Adapter><sap:MessageId>729468d1-9d7a-11e3-8cb7-00000086498a</sap:MessageId></sap:Hop></sap:HopList></SOAP:Header><SOAP:Body><sap:Manifest xmlns:sap='http://sap.com/xi/XI/Message/30' xmlns:xlink='http://www.w3.org/1999/xlink'><sap:Payload xlink:type='simple' xlink:href='cid:[email protected]'><sap:Name>MainDocument</sap:Name><sap:Type>Application</sap:Type></sap:Payload></sap:Manifest></SOAP:Body></SOAP:Envelope>Content-ID:<[email protected]>
Content-Disposition:attachment;filename="MainDocument.txt"
Content-Type:multipart/mixed; boundary=BOUNDARY
Content-Description:MainDocument

Hello Amit
I have tried that option but main problem is that I don’t want below content that generated By XI after SOAP Envelope, is it any way to remove below content
Content-ID:<[email protected]>
Content-Disposition:attachment;filename="MainDocument.xml"
Content-Type:application/xml
Content-Description:MainDocument
Regards,
Amit

Non-standard fonts in JOptionPane

I have looked extensively through this forum, and no one has answered this specific question, even though it has been asked several different ways. Maybe someone has an answer now.
I am writing a client app using Java 1.4.2_02 that needs to display many languages. I have all of the European languages displaying correctly in JFileChooser and JOptionPane. I even have the Asian languages displaying correctly in JFileChooser. What I can't do is display the Asian languages (and probably any non-standard font) in JOptionPane correctly - all I see are boxes in place of the characters. Here is the relevant code of what I have tried so far:
        Locale.setDefault(Locale.JAPAN);
        int option = JOptionPane.YES_NO_OPTION;
        String [] buttonText = null;
        switch(option) {
            case JOptionPane.YES_NO_OPTION:
                buttonText = new String[2];
                buttonText[0] = UIManager.getString("OptionPane.yesButtonText");
                buttonText[1] = UIManager.getString("OptionPane.noButtonText");
                break;
            // other cases...
        JOptionPane jop = new JOptionPane("Do you wish to display Japanese fonts?",
                                          JOptionPane.ERROR_MESSAGE,
                                          option,
                                          null,
                                          buttonText);
        // Have tried many fonts - MS Gothic seems to be the one that should work, though.
        // BOLD seems to slightly work - I see a (Y) or a (N) after the strange characters.
        jop.setFont(new Font("MS Gothic", Font.BOLD, jop.getFont().getSize()));
        JDialog jopDialog = jop.createDialog(null, "Dialog Title");
        jopDialog.show();Even though most of the above code is from a post by one of the authors of "Java Internationalization", this doesn't work. Has anyone solved this problem?

To solve this problem, you have to tell the UIManager to set the font everywhere you need the new font. Unforunately, there is no one method call to do this. So here is the short version:
        localizedFont = new Font("MingLiU", Font.PLAIN, 12); // or whatever font you need
        UIManager.put("ToolTip.font", localizedFont);
        UIManager.put("OptionPane.font", localizedFont);
        UIManager.put("Button.font", localizedFont);
        // etc...    Another thread (I forget where) gave code to extract all of the properties of UIManager - find that thread to get all the properties.

How can I extract non-cumulative cube data to another cubes ?

Dear Expert,
         I copied inventory cube 0ic_c03 to a new cube : ZIC_C03 , then I loaded the data of 0ic_c03 to the new cube ZIC_C03 .
the loading was sucessful, but the result of report of the ZIC_C03 was not correct. After looking into the problem, I found out
the new cube can successfully extract data related with "Goods movement" & "Revaluation", yet the extract of "Open Balance" does not seems to work.
         I have read through Note:375098, in which I could not find (InfoObject 0RECORDTP) in my start routine as mentioned in the solution
,and the note was not mentioned valid for BW 3.5 release.
         How can I extract non-cumulative cube data to another cubes correctly in BW3.5 release SP20?
   Thanks !

Hi,
Check Routines in Update rules wether same code is wrriten in new cube
cheers,
Satya

Extracting non-standard xem content into XEM

Similar Messages

Maybe you are looking for