Extraction Error: ERROR occured in the data selection

Hello everybody,
I have made configurations for the BW connectivity. Finally I was able replicate data sources from R/3 to BW. But when I try to extract the data its giving me the error. In monitor details, in extraction node its showing like "Error occured in data selection."
Its not giving me any more messages. I think the problem is with the BW connectivity configurations. Its my guess only. Is that right? But I am able to replicate my data sources.
Please help me.
Thanks in advance.

Hi:
1)Try the RSA3 extractor in R/3.
2)Try simulate load in InfoPackage.
If RSA3 is good, and infopackage is giving error, then its connectivity.
Also, create another infopackage and try again just to make sure.
Ram Chamarthy

Similar Messages

Error occured in the data selection while extract data from Source system

Hello Friends
i am facing Problem while extracting data to Biw System from SAP R/3 system
The error mesage is 'Error occured in the data selection '
i.e. Monitoring - Details tab - Extraction - With error

Hi
The delta wil take the Last init selection for loading data in to the BW...
Did u check the IP at the Update tab is it the correct delta only.. or its a full..
better to go to the RSA3 and check the extractor in the Delta mode .. if u give ur delta mode it automatically takes the selction options.. so please try in RSA3..
regards
CK
PS: CHECK THE INIT SELECTIONS TOO or do an init with outdatatransfer and perform the delta...
Message was edited by:
BW Star

Error occurred in the data selection,If i do Repeat, then it is working fin

Hi Freinds,
Here is the error message,
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Details Tab:
Extraction (messages): Errors occurred
Error occurred in the data selection ....
If i do Repeat Delta, then it is working fine.
As it is a daily load, manually repeating the load from the past 10 days.
Have tried using program RS_TRANSTRU_ACTIVATE_ALL.
Any inputs pls.....

Hi Friends,
Thanks for your valuable inputs, Problem is solved.
The Reason is that, there is a time difference in the r/3 system and bi system.
The tolerable time differene shud be only 60 seconds.
Basis guys took down time at the OS level and hav made the timers sync.....
The problem is on the source system GNP time differences
persists, which can cause the problem with delta upload .
Universal Time Coordinated UTC....: 1291187626
Date and time of database.........: 01.12.2010 12:46:59
Date and Time of R/3-Kernel.......: 01.12.2010 12:43:46
Date and Time of ABAP-Processor...: 01.12.2010 12:46:58
ABAP Time zone Setup ..............: 19800
Date and Time / local time ........: 01.12.2010 12:43:46
This leads to an exception of the delta processing, because this
tolerates a deviation of 60 seconds only (When the repeat is processed,
the "local time" in the ABAP is higher than the qrfc counter at the time when the delta was processed -> So a repeat works fine).
Please synchronize the timers like described in attached note 101726 and 741734 to eliminate the time difference .
With Regards
Badri Thiriveedhi.

Process chains-Error occurred in the data selection-DBIF_RSQL_TABLE_UNKNOWN

Hi All,
The problem occurred in PC which was running smooth until now
Now I am getting message:
in BI : Error occurred in the data selection
When I went in R/3 it shows DBIF_RSQL_TABLE_UNKNOWN
Probably the only way to eliminate the error is to correct the program.
Please check the entries in the system log (Transaction SM21).
Internal call code.........: "[RSQL/READ/PA0009 ]"
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
DBIF_RSQL_TABLE_UNKN
SAPLXRSA" or "ZXRSAU
EXIT_SAPLRSAP_002"
Can anyone explain..

Hi ,
Check note 950317.
also check the blow forum having same kind of discussion :
Runtime Errors DBIF_RSQL_TABLE_UNKNOWN
Short dump error DBIF_RSQL_TABLE_UNKNOWN
DBIF_RSQL_TABLE_UNKNOWN
thanks,
Deepak

Error message :"Error occurred in the data selection"

Hi All ,
When I am exracting a Delta from source I am getting this error mesage Error occurred in the data selection" can any one let me know how to slove this,
Thanks in Advance.
rao

Praveen,
In SM 37
In JobName i have given - *REQU_4683BBF4HXG4XW4ASQOSP6PJG
where REQU_4683BBF4HXG4XW4ASQOSP6PJG is Request no
User Name is -- *
then I had check all these
sched, Released, ready, active, Finished, cancelled
then executed
then i received the message no jobs are matches the selection criteria
thanks
prasanna

"Error occurred in the data selection" on init delta load ODS- InfoCube

Hi, gurus and experts!
I'm trying to do Init delta load from 0FIAR_O03 ODS into 0FIAR_C03 InfoCube in PRD env. by InfoPackage "Initialize with delta transfer (with data transfer)". Immediately after the load was started I got error
"Error occurred in the data selection"
with details
"Job terminated in source system --> Request set to red".
Where are no any short dumps. There are 1 activated init load in ODS - nearly 6 500 000 records.
Any ideas about error? And the way I can load data?

Hi Gediminas Berzanskis,
I faced the similar error when I tried to load data from an ODS which contained huge amount of data to a Cube. Even in your case the volume of data is more (around 6.5 million records). The error could be due to the table space issue, please contact your Basis team to check if enough table space exist for both the data targets.
Meanwhile you may also check the RFC connection of the Myself source system.
You can replicate the DSO datasource once and then reactivate the transfer rules using the program RS_TRANSTRU_ACTIVATE_ALL.
Try load with a small amount of data with a Full load option and then with a delta option..
Hope this Helps,
Prajeevan (XLNC)

Firefox Version 27 Reporting Services Action Menu Error. An error has occurred with the data fetch.

Hello, since I've updated to Firefox 27.0.1 on Windows 7, I'm encountering a problem with Reporting Services on a Sharepoint site. It is a Sharepoint 2010 site with SQL Server Reporting Services 2012 Sharepoint Integrated mode. I was previously on Firefox version 26 and didn't encounter this problem.
When a report is open and you use the Actions link on the Reporting Services toolbar, I receive the following error messages.
An error has occurred with the data fetch. Please refresh the page and retry.
I've tried updating to Firefox 28 beta but the same error occurs. I see another user is having the same problem here. http://sharepoint-community.net/forum/topics/reporting-service-and-firefox-27
Any help would be appreciated. Thanks!
Ryan

Rachel, I did perform the Sharepoint file alteration discussed in the other article and it did stop Firefox from producing the error. I've done some testing on some other browsers and have yet to encounter any problems with the fix however I'm hesitant to perform that workaround in a production environment.
Thanks for looking.
Ryan

"Error Occurred in the Data Selection" while excuting InfoPackage for DataSource(ORT_PA_TRAN_CONTROL)

Hi,
Can anyone help me out with the data selection error in InfoPackage, while I was trying to extract the DataSource(0RT_PA_TRAN_CONTRL) to BW./
I've tried with "Init With Data Transfer" and without the use of Conversion Routines.
Thanks,
Taehoon.

Hi,
Why your using conversion routine at info pack level?
Actually conversion routine already defined for info object 0MATERIAL, general tab.
at info pack level, remove conversion routine MATN1 and don't give any selections.
First try to run data source at source system RSA3. if it works then later you can trigger at info pack level without any selections.
Thanks

Error occurred in the data selection

Hi Expert,
I met issue when full loading data from R3 via customized datasource.
the error message in request monitor is:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
I checked in RSA3, the data extraction is successful, but in BW, when execute the infopackage with or without data selection, both failed due to the same error.
I also checked the background job in SM37 in source system, the background BI* completed successfully, and the IDoc in both BW and source system processed successfully.
I also tried to replicate datasource and activate is using RSDS_DATASOURCE_ACTIVATE_ALL, delete infopackage and recreate it. but seems all this didn't work.
Could u pls tell me how to solve this issue? Thanks.
Eileen

Hello Eileen zhang,
I have exactly the same error as you, do you still remember how did you solved this problem?
Regards,
Thanks,
Maria João
Error message:
"Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request."

Error occured in the data selection...urgent

Hi,
The master data(full update) is being pulled from R/3 to BW..while pulling it has thrown the error as below.
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the
when i checked in the error message it is showing as below
Incomplete control parameter for commmunication with the BW system
Errors in source system
The detailed error message is as below..................
Diagnosis
The control parameters for communication with the BW server are not
    complete. A BW PlugIn upgrade could be the cause of the problem.
System response
Procedure
Depending on the Release of the BW server, proceed as follows:
    BW Server Release 1.2B: Source system: Update InfoSource metadata
    BW Server Release >= 2.0A: Source system: Activate
I have spoken with basis they told that they have done Kernel updation for BW..please help me in resolving this ..
I have reran the infopackage still it is showin the same error..its very urgent
thanks in advance..points will be assigned..
regards,
Manjula

Hi Manjula,
May be that this the Partner profile settings problem....
Please check your partner profile settings in source system...
Login the sources system > goto Tcode:WE20 select the BW system>
check the all the settings one by one...
Thanks
Regards
Sathis
If it is useful assign the points...

Error occured in the data selection ...

Hi experts,
I have included a delta info package into a process chain.
But when i checked the process chain, it was showing an error
in the data store activation step as follows:
============================================
Diagnosis
DataSource 8YRTODSON does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 06.06.2008 13:34:56.
The time stamp in the BW system is 12.07.2007 12:33:40.
I appriciate your help on this.

Still the same.
1. i have deleted the bad requests from the cube.
2. replicated the data source.
3. activate the transfer structure.
4. and then loaded the data,
But still i am getting the same error message.
Thanks...

Error in data loads-Error occured in the data seletion

Hi,
We have to do an init load for Period 10 from data source 0EC_PCA_3.
When the period changes we usually copy the previous infopack and change the fiscal yesr period and do an init load.
This time we have to change the fiscal period to 010, we created a new info pack but the fiscal year period we forgot to change and was 009 and scheduled a init load.
The load failed with error mesg IN EXTRACTION PART:
1) syntax error in RSCDELTA
2) Error occured in the data selection -RSM 340
REQUEST part in monitor screen is green.
TRANSFER part in monitor screen is green
EXTRACTION shows:
Data request received ---green
Data selection scheduled -
green
Error occurred in the data selection -
RED
Processing (data packet): No data ---RED
We deleted the red request in the ods , deleted the init load in scheduled -init for source system --- chnaged the fiscal yesr period to 010 and triggered a new load but again it gives the same error mesg.
How to rectify this and do loads to the target successfully.
Please suggest

Please check the job log in the source system. It will give you the exact reason why extraction is failing. You need to act accordingly.
Thanks..
Shambhu

Error in the Data Selection - Errors in Source System RSM 340

Hey Everyone,
I'm having an issue with loading a Delta for 0MAT_PLANT_ATTR. This is the second night it has happened, where I get the error "Error in the Data Selection". This error happens in the EXTRACTION part of the Monitor. And, we cannot run another Delta to see if it'll work, we have to delete the old Delta Init, and run a new one. The other error is "Errors in Source System - RSM340". That's as much it gives.
Could anyone suggest why this would be happening? I checked RSA3 in R/3, and no errors on the extraction. I also checked sm37 against the job that loads that data, and it completed successfully. I honestly don't think there's an issue with the data. We cannot have this happen often, and I just need to know if this is something that can be corrected.
Thanks,
John

There is nothing wrong with the TID's or anything like that. There is also no selection criteria in the infopackage.
When the Delta fails, the error occurs under EXTRACTION in the monitor. It seems to be successful under TRANSFER and PROCESSING in the monitor, which I find strange. Also, I run a new Delta Init with Data Transfer, and that works just fine.
So, I'm not sure what it could be?

SAP MII 14.0 SP5 Patch 11 - Error has occurred while processing data stream Dynamic Query role is not assigned to the Data Server

Hello All,
We are using a two tier architecture.
Our Corp server calls the refinery server.
Our CORP MII server uses user id abc_user to connect to the refinery data server.
The user id abc_user has the SAP_xMII_Dynamic_Query role.
The data server also has the checkbox for allow dynamic query enabled.
But we are still getting the following error
Error has occurred while processing data stream
Dynamic Query role is not assigned to the Data Server; Use query template
Once we add the SAP_xMII_Dynamic_Query role to the data server everything works fine. Is this feature by design ?
Thanks,
Kiran

Thanks Anushree !!
I thought that just adding the role to the user and enabling the dynamic query checkbox on the data server should work.
But we even needed to add the role to the data server.
Thanks,
Kiran

Failed to back up the data. A fatal error has occured and the application is being terminated.

hi,
I am working on a content development using captivate 5.5. all of sudden I am not able slide view I am not able to view the text captions in slide view but i am able to see the text caption in Filmstrip. and when I am selecting another side it throwing below error and application ends.
Adobe Captivate
A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.
Please restart Adobe Captivate.
OK
I have a deliverable by this weekend if some can help to resolve this issue will be appreciated.
Note: when first time it crashed, I re-created the course again from scratch and its crashed again. I have multiple attempt to finish this course but no luck.
Please help me out to deliver my work.
Thanks
CD

We have the exact same problem.Renaming the backup file per this post http://forums.adobe.com/message/4055726 didn't work. I can open the file and see the text boxes even though they're now showing as empty. Is there any way to recover the file?
Yes, we were using a network drive but now we've switched to locally stored content.

Extraction Error: ERROR occured in the data selection

Similar Messages

Maybe you are looking for