Extraction Error
Hi All,
When i am extracting data from R/3 system i'm getting an error like below
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System response
There are IDocs with incorrect status.
Procedure
Check the IDocs in Source System . You can get here using the BW Monitor.
Removing errors:
How you remove the errors depends on the error message you receive.
can anybody help me out to solve this?
thanx in advance
peter
Hi,
From the description of the error message, I think there might be some issue with partner profile definition in the source system. You can check the definition ( transaction code "we20" ) for message types 'RSRQST', 'RSINFO' and 'RSSEND'. The first one should be defined in the 'inbound parameters' and the last two in the 'outbound parameters' in the source system and vice-versa in the BW system.
Hope this helps.
regards,
Pinaki
Similar Messages
-
CC 2014 update extraction error on Mac
When attempting to update to CC 2014 on Mac OS 10.9.3, I'm repeatedly met with "Update Failed: Unable to extract the downloaded files. Press Retry to download again. (U44M1I210)."
Strange enough, Adobe Media Encoder and Adobe After Effects updated to their 2014 versions no problem, but this broke the dynamic link to Premiere. (Another hassle to deal with throughout the work day until Premiere is updated)
Adobe Illustrator stalled at 42% for 3 hours, so I quit the Creative Cloud manager and tried again. Continuously met with the same extraction error message.
Any resolutions out there? Restarting the computer and repairing permissions has not yielded any change.Hi Rave,
Thank you for taking the time to reply. I found that simply deleting the ~/Library/Application Support/Adobe/AAMUpdater/ directory was a faster solution than taking the time out of my day to uninstall and reinstall all of my Adobe apps. I will be submitting a bug report to address the issue with the Creative Cloud updater.
Thanks,
dtderong -
Cost Center hierarchy extraction errors
Hi,
I'm trying to extract R3 Cost center hierarchies into BW and in doing so, I get following errors. Could some one shed some light on these errors.
Extraction (messages):Errors occured
Error occured in the data selection
But, I successfully extracted Cost center master data from R3 just before hierarchy extraction.
I also checked RSA3 for the hierachy that I'm trying and it pulled around 2000 records in R/3 datasource extractor.
Appreciate any help
Hari Immadi
http://immadi.com
SEM BW AnalystHi,
Thanks for your reply.
I replicated the datasource before starting the extraction & also I double cheked the hierarchy name between BW & R3.
I don't get any other useful messages in the log & here is the entire log.
Requests : Everything OK
Extraction : Errors occured --> Errors occured in the data selection
Trasnfer IDOCS & TRFC : Everything OK
Processing (data packet) : No data
Subseq processing : Missing messages
Soon after execution of extraction, I get ALE Inbox error as follows & I double cheked that hierarchy in R/3 is not being edited.
Express document "Check Load from InfoSource 0COSTCENTER" received from author " Warehouse background user"
Check Load from InfoSource 0COSTCENTER , Packet Cost Center hier test
for demo
Please execute the mail for additional information.
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
An error occurred in Service API .
Check the error message.
Procedure
The procedure for removing errors takes place depending on
the error message:
Note
If the source system is a Client Workstation, then it is possible that
the file that was to be loaded was being edited at the time of the data
request. Make sure that the file is in the specified directory and is
not being edited, and restart the request.
Note: If you not wish to receive any mails, maintain transaction
RSMONMAIL.
Hari Immadi
http://immadi.com
SEM BW Analyst -
Photoshop CS3 Eng Widows WebInstaller Extract Error
I downloaded Photoshop CS3 and run the installer. After it extracted some part of installator files it displays extraction error, so the installator placed on the ADOBE.COM web site is corrupted. Where to find correct one?
Lets say. I tryed on 2 mashines: 1 in corporate network and second in home lan. Everyone of them have NOD32 antivirus installed and do not reported anything suspicios.
Problem still here. -
Position Activity Sequence Resulting in data extracting error
hi gurus
can any body tell me what is this position activity sequence error resulting in data extracting error, plz help. this is very high priority for me.
regards
devI rebuild the report using a tabular form and populated the primary key with a PL/SQL expression and now it appears to be working. P1_ISSUE_NO is the primary key on the issue table and I could not figure how to get it in the issue_no field of the tabular report when a new line was entered I ended up putting the following code in for the default for
issue_no on the report:
Begin
return :P1_ISSUE_NO;
end
It works great. -
How to extract error message for each output type.
Hi All,
Need your advice on the problem that I have.
Expected Solution:
1. Create an extra column for displaying header output error message from VF02 into a report program.
Steps that i have did:
1. Go to transaction VF02.
2. Enter a billing document number.
3. Hit enter. Click "Goto" > Header> Output
4. Click on the status that is red colour. Click on "processing log".
5. Press "F1" on the red colour message type. (Found out that it is a structure).
Need your advice on the question that I have:
1) How do we know that which "not successfully" process output type belong to which error message class?Hi Brad Bohn,
Thanks for your advice. I am so sorry about that. Thanks so much for your advice. And i have follow your advices and steps given by you. Appreciate it very much.
But for this issue about how to extract message for each output type. I have follow your steps by using SE30 to trace VF03 and I managed to found out that they are using this function module "WFMC_PROTOCOL_SHOW". Need your advice on this, how do we know each different output type with different error message is pulled from?
From my further research and in depth debugging into this function module, i manage to find this global internal table "PROTO_TAB" which stores all the text messages for each output. How does this internal table is populated?
Thanks in advance.
Regards
Shawn -
Sap crm(7.0) datasource test extract error
hi,all:
I activate the CRM datasouce 0CRM_CIC_CTI successfully, but when i did the test extract with T-CODE RSA3,THE error happened. the error description in the below:
Update mode F is not supported by the extraction API
Message no. R3011
Diagnosis
The application program for the extraction of the data was called using update mode F. However, this is not supported by the InfoSource.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
what can i do to solve this question?
wish some help.
THANKS VERY MUCH!Hi,
关于CRM datasource的OSS MESSAGE是CRM的支持顾问负责的..
如果您还有疑问,可以告诉我message number, 我可以帮你确认下..
不过如果设计上的确不支持full mode..那支持顾问也无法阿..
祝好..
Vince -
unable to update to ios 5 on windows 7. please can someone help me i have tried everything? i deleted itunes and downloaded the new version when i plug my iphone 4 in it does a back and then I then everything runs normal and it extracts and then i get an error code at the end 3197. had the iphone for two months and its new.
Please can somene help me, i am currently on version 4.3.3 (8J2)
Modem Firmware 04.10.01followed someones instructions and it has worked ios 5 is now working on my iphone 4
-
Photoshop CS5 Trail Extracting error -4960
I am trying a Trial Download of Photoshop CS5 and during Extracting, I recieve "The following disk images couldn't be opened" The image is Photoshop-12-1-LS1.dmg and the error -4960.
What must I do?
Thanks,
ymlevyrsaIt appears that your download has been corrupted. To resolve your difficulties I would recommend completing Solution 1 in Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html#main_Solutio n_1. Once done you will want to begin the download again.
-
Adobe Form (data extraction error)
Hi Experts,
i'm trying extract data from PDF file. (Adobe Offline scenario).
I'm getting this XML runtime error.
could anybody can help me to solve this problem.
This is my code ,
CALL TRANSFORMATION id
SOURCE XML lv_xml_data_string
RESULT T_sums = wa_sums
customer = wa_cus
bookings = wa_book
connections = wa_conn.
Here is the error
>>>>>>>>>>>>>>>>>>>>>
Error analysis An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_XSLT_RUNTIME_ERROR', was not caught and therefore caused a runtime error. The reason for the exception is: Either the source document contains invalid XML or it is handled incorrectly in the ABAP program that called the transformation.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
i will appreciate valuble answers.
Thanks ,
Lahiru.Hi Experts,
i'm trying extract data from PDF file. (Adobe Offline scenario).
I'm getting this XML runtime error.
could anybody can help me to solve this problem.
This is my code ,
CALL TRANSFORMATION id
SOURCE XML lv_xml_data_string
RESULT T_sums = wa_sums
customer = wa_cus
bookings = wa_book
connections = wa_conn.
Here is the error
>>>>>>>>>>>>>>>>>>>>>
Error analysis An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_XSLT_RUNTIME_ERROR', was not caught and therefore caused a runtime error. The reason for the exception is: Either the source document contains invalid XML or it is handled incorrectly in the ABAP program that called the transformation.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
i will appreciate valuble answers.
Thanks ,
Lahiru. -
Hi Gurus,
We are doing HR data extraction with the following details:
Cube: 0PT_C01 - Time and Labor
data source: 0HR_PT_1 - Times from personal work schedule
Records in ECC: 15mill +.
"Init load with Data "is being loaded in packets of 40K records (400 packets approx).
Each time we load (we tried reloading after deleting data and reinit) it is loading same records. But it is giving the following error. Surprisingly this error is coming for different packets in different loads. for ex: 1st time packet 6...2nd time packet 58....3rd time 122 etc.....it keeps changing...
Processing end : Errors occurred
Error when generating the update program
Diagnosis
An error occurred during program generation for InfoSource 0HR_PT_1 and
InfoProvider 0PT_C01 . This may be extrapolated to incorrect update
rules.
Procedure
Check and correct your update rules and then generate the update program
again. You can find help on the error in the error log.
We reactivated and verfieid update rules. But no use.
Appreciate any kind of help.
thanks in advance.
J.Oscar,
Thanks for the help.
We tried the following one by one.
1. Delete and recreate update rules. To be frank....there is no CODING or complication in there...
It did not work.
2. Tried loading only to PSA. It loaded 15mill records perfectly. But when we tried updating target cube,
same story with many more errors.....earlier we had 10 packages failed out of 387.......
this time almost every alternate package is marked red and same error....update generating update
program.....
Hope somebody will come up with a solution. -
Extraction Error: ERROR occured in the data selection
Hello everybody,
I have made configurations for the BW connectivity. Finally I was able replicate data sources from R/3 to BW. But when I try to extract the data its giving me the error. In monitor details, in extraction node its showing like "Error occured in data selection."
Its not giving me any more messages. I think the problem is with the BW connectivity configurations. Its my guess only. Is that right? But I am able to replicate my data sources.
Please help me.
Thanks in advance.Hi:
1)Try the RSA3 extractor in R/3.
2)Try simulate load in InfoPackage.
If RSA3 is good, and infopackage is giving error, then its connectivity.
Also, create another infopackage and try again just to make sure.
Ram Chamarthy -
Extract error for an Infoset Query based Datasource
Hello All,
When I test a Info set Query Extraction in RSA3, I am facing the error message:
The field 'ZBW_EXTRACT' is unknown, but there are following fields with similar name '%COUNT-ZBW_EXTRACT'.
Syntax Error in Program 'AQZZSYSTBWGENER.....'
The Program is an Internal system generated program.
Has anyone faced the issue and know the way out..?
Definitely, will award points..
Thanks in advance,
Ameya.Hi Ameya,
which system are you testing this? I mean are you testing this in dev or qa? If you are testing in QA, make sure you import the infoset correctly. It is a different procedure. Hope it helps.
Thanks and Regards
Subray Hegde -
Bi 7 extraction error..
hello folks,
I am trying extract flat file data into cube when i do that using PSA..i get error of "message type X" and when i do that skipping PSA..direct upload..it works fine..
help is appreciated...
Points will be awarded..
regards
GVShi,
Load data upto PSA using infopack then load to cube by using DTP.
If you use process chain for this load, use store the file in application server.
client server files cannot be uploaded by background process.
Assign Points if useful
Ramesh -
BI extraction error -- Application document not posted - IDOC Status 51
Hi,
I am getting the following error while extracting data from ECC to BI.
'Application Document not posted'
I went to BD87 in ECC and found that the Idoc Status is 51 and the message is
'Request REQU_4C65QV...V9QRNZ2X9TV9QRNZ does not exist in target system N05CLNT100'.
I have already checked partner profile parameters with Basis and they claim everything is okay.
Do you have any ideas what might be the issue?
Thanks,Hello Rajendra,
You can review the note 417307 which contain information about the MAXSIZE of a package size. This is a collective note which contain more notes to other extractors.
417307 - Extractor package size: Collective note for applications
549184 - FAQ: What is important for extraction
157652 - Main memory requirement for extraction from R/3
You can review the table ROIDOCPRMS and check if the parameter StatFrqu contains a 'X' or a number? You can set this option to 99.
You can also review the correction note 1147326.
Check as well if the user ALEREMOTE have the proper profiles configured in both source and target system, sometimes the user is missing the profiles, to check this, read the note 150315.
I hope that the information can help you.
Regards,
Daniel -
File Extraction Error during Adobe Acrobat XI Pro installation
I continually no matter how many times I re-download Adobe Acrobat XI Pro Student and Teacher Edition, I receive the same error "Error in extracting files. Re-download Adobe Acrobat XI Pro." (Paraphrased). Suggestions?
This was my goofup... please be sure to type subst and not substr Z: "C:\Windows" in the command prompt for Admin.
The source I copied and pasted from added the "r"
With the proper command adjusting the "invalid" drive, the install of acrobat succeeded.
Maybe you are looking for
-
I have a clickfree backup drive and my computer crashed. I restored it to factory settings and reinstalled Firefox but cannot figure out how to get my old bookmarks back. I tried to replace the new places.sqlite file with the one I had on my backup d
-
i instaled adobe photoshop elements 13 and now i can not open the program
-
Cannot run X apps in a docker container
Hi, I have a Dockerfile which enables me to run X apps. It works perfectly in Ubuntu, but not in Archlinux: FROM mascip/archlinux:2014.12.09 # To avoid a bug with the filesystem: https://registry.hub.docker.com/u/base/arch/ RUN sed 's/^CheckSpace/#Ch
-
How to configure a RV220W in normal routing mode (No NAT)
Hi, I have been very busy the last few days in trying to configure this router in normal routing mode. I do not want to have double NAT in my network. This is my setup: C class IP network connected to the internet via a Fritzbox router. I need this r
-
Supplier users are not receiving notification
Hi - I am implementing iSupplier portal. When I try to invite any supplier user, no notification is sent to given e-mail ID. Please provide the pointers if I am missing on any set up part. Thanks in anticipation.