Extraction failed access denied

Hi,
i have SQL Server express 2008 R2 running. Now i wanted to install advanced services like SSRS. So downloaded SQLEXPRADV_x86_ENU.exe file.
When i try to install the same I get error "Access Denied" during extraction of Autorun.inf file. I updated local security rights as advised in KB2000257. But still issue remains the same.
Please help

Hi Ram,
Based on your description, the error might be caused by different factors. For example, your account has no permissions to extract the setup file, or firewall blocks the Autorun.inf file. There are some proposals for you troubleshooting this issue as follows.
1. As Shanky’s post, please make sure that your account has admin permissions, and choose ‘Run as administratror’ to complete the extraction.
2. If your account has admin permissions, turn off firewall and disable any third-party software such as antivirus software, then try to extract the setup file again and check if the error still occurs.
3. You can also extract the SQLEXPRADV_x86_ENU.exe file from command prompt. Navigate to the folder containing the SQLEXPRADV_x86_ENU.exe file, and type SQLEXPRADV_x86_ENU.exe /X, then you will get a window to specify the location where it needs to extract
the file, specify a different location and check if it is successful.
Thanks,
Lydia Zhang

Similar Messages

N8 Belle connection failed- access denied. NO INTE...

After the Belle update I have a problem with my internet connections. Both WiFi and mobile internet are not working at all. At first it was ok but after a while or a reboot of the device I simply cannot connect to any wifi wether it's a known one or an open one. I always get an box message on the top of the screen that says
"Connection failed
Access denied"
There's nothing I can do about it! I tried reinstalling Belle and it was ok at first but shortly the problem occurred. So I have a phone with NO INTERNET CONNECTION at all!!! It's almost useless.
I would like a nokia support response please. This is a huge problem!
Solved!
Go to Solution.

Posts: 3
Re: N8 Belle connection failed- access denied. NO INTERNET![ Edited ]
19-Feb-2012 11:12 AM - last edited on 19-Feb-2012 11:30 AM
Hi Torben
Thank you for contacting Nokia Care customer support.
Since we wrote last I have got a lot more experience with the Belles situation in this area.
Recently suspicion fell on a bug in old saved data from the "Anna" that causes general network error.
To solve it, there must be a backup - but NOT the programs / settings, since they bear the error.
Subsequently, disconnect the phone from, select the Offline profile (Press and hold the cards on the off button and choose the one on this list)
"Ring" now * # 7370 # accept and enter the security code is 12345, if it asks for it.
Your security code if you have change it.
Set Time & Date and reviewing start-up menus.
Get immediately sent to the settings for data and multimedia.
Restart your phone and try now about the Internet is working properly.
Do they do it; you can safely restore contacts and whatever else you have in your backup.
I would personally appreciate it if you want to participate in a brief survey that will be about my response to you. Customer survey will receive a separate e-mail.
If there is anything I can do for you, then you're obviously more than welcome to contact me again.
Sincerely
Jannik Petersen
Nokia Care
Thanks, these steps resolved my Connectivity issues

Opening device /dev/sg3 failed - access denied to /dev/sg* device file

Opening device /dev/sg3 failed - access denied to /dev/sg* device file (OB scsi device driver)
Got this message when running an automated RMAN job.
To my knowledge the only thing that has changed since being able to run RMAN jobs with OSB and not being able to run them is that the permissions on /usr/tmp were changed from drwxr-xr-x, not drwxrwxrwx.
Transcript below:
2010/01/27.04:03:20 ______________________________________________________________________
2010/01/27.04:03:20
2010/01/27.04:03:20 Transcript for job oracle/6142.1 running on backup01
2010/01/27.04:03:20
2010/01/27.04:03:20 (amh) qdv__automount_in_mh tape1 at 2010/01/27.04:03:20, flags 0x100
2010/01/27.04:03:20 (amh) mount volume options list contains:
2010/01/27.04:03:20 (amh) vtype 3, vid (null), vs_create 0, family PAS-RMAN, retain (null), size 0, scratch 0
2010/01/27.04:03:21 (amh) don't preserve previous mh automount state
2010/01/27.04:03:21 (amh) loaded volume has no barcode
2010/01/27.04:03:22 (amh) beginning pass 1
2010/01/27.04:03:22 (mmr) volset containing oid 20859 (vid PASWLY-000215, tag 000086L3) is closed
2010/01/27.04:03:22 (amh) 1 oid 20859 doesn't meet mount requirements - volume set is closed to further update (OB device mgr)
2010/01/27.04:03:22 (mmr) need next volume after oid 20543 (vid PAS-RMAN-018887, tag 000048L3) for append; its oid 20604
2010/01/27.04:03:22 (amh) 2 oid 20543 doesn't meet mount requirements - the next volume of this set is needed (OB device mgr)
2010/01/27.04:03:22 (mmr) oid 20949 (vid PAS-RMAN-018935, tag 000021L3) passes criteria
2010/01/27.04:03:22 (amh) 3 loading
2010/01/27.04:04:04 (mt) qdv__read_label() succeeded; read 65536 bytes
2010/01/27.04:04:05 (atv) automount worked
2010/01/27.04:04:05 (amh) 3 automount worked - returning
2010/01/27.04:04:05 (amh) end of automount at 2010/01/27.04:04:05 (0x0)
2010/01/27.04:04:05 Info: volume in tape1 is usable for this operation.
2010/01/27.04:04:05 (pvfw) at BOT
2010/01/27.04:04:05 (pvfw) previous state is invalid
2010/01/27.04:04:05 (alv) backup image label is valid, file 1, section 1
2010/01/27.04:04:05 (pvfw) invalidating tape position in mount db
2010/01/27.04:04:05 (ial) invalidate backup image label (was valid)
2010/01/27.04:05:17 (pvfw) space to EOD
2010/01/27.04:05:26 (pvfw) inspect_recs BSR: rtypes [0] = filemark
2010/01/27.04:05:26 (pvfw) inspect_recs BSR: rtypes [1] = filemark
2010/01/27.04:05:26 (pvfw) inspect_recs BSR: rtypes [2] = data
2010/01/27.04:05:26 (pvfw) inspect_recs BSR: rtypes [3] = filemark
2010/01/27.04:05:26 (pvfw) inspect_recs FSF
2010/01/27.04:05:26 (pvfw) inspect_recs ready to mount
2010/01/27.04:05:26 (pvfw) mounting at inspect_rec's request in rw_mode 2
2010/01/27.04:05:28 (pvfw) mounted ok
2010/01/27.04:05:28 (pvfw) at OB EOD, returning (2)
2010/01/27.04:05:28 (pvfw) pos_vol_cleanup not returning pstate
2010/01/27.04:05:28 (dmap) tape1 success
04:05:28 OBTR: obtar version 10.2.0.3.0 (linuxamd64) -- Wed Sep 24 11:12:44 PDT 2008
Copyright (c) 1992, 2007, Oracle. All rights reserved.
04:05:28 OBTR: obtar -c -Xjob:oracle/6142.1 -Xob:10.2 -Xstat -X shm:/usr/tmp/obsbt_10985_0_126458300010985a -Xbga:oracle/6142.1 -y /usr/tmp/[email protected] -J -F5 -f tape1 -Xrescookie:0x99ECC895 -H backup01 -zR
04:05:28 OBTR: running as root/root
04:05:28 OBTR: record storage set to internal memory
04:05:28 ATAL: reserved drive tape1, cookie 0x99ECC895
04:05:28 OBTR: obsd=1, is_job=1, is_priv=0, os=15
04:05:28 OBTR: rights established for user oracle, class admin
04:05:28 SUUI: user info oracle/oinstall, ??/??
04:05:28 STTY: background terminal I/O or is a tty
04:05:28 MAIN: interactive
04:05:28 SET: volume has no expiration time
04:05:28 CNPC: data host reports this butype_info:
04:05:28 CNPC: tar (attr 0x2C78: B_DIRECT, R_DIRECT, B_INCR, R_INCR, B_FH_DIR)
04:05:28 CNPC: DIRECT = y
04:05:28 CNPC: HISTORY = y
04:05:28 CNPC: LEVEL = 0
04:05:29 DOLM: nop (for tape1 (raw device "/dev/sg3"))
04:05:29 DOLM: ok
04:05:30 RLE: connecting to volume/archive database host
04:05:30 RLE: device tape1 (raw device "/dev/sg3")
04:05:30 RLE: mount_info is valid
04:05:30 A_O: tape device is local
04:05:30 A_O: Devname: HP,Ultrium 3-SCSI,G63Z
04:05:30 Info version: 11
04:05:30 WS version: 10.2
04:05:30 Driver version: 10.2
04:05:30 Max DMA: 2097152
04:05:30 Blocksize in use: 65536
04:05:30 Query frequency: 134217728
04:05:30 Rewind on close: false
04:05:30 Can compress: true
04:05:30 Compression enabled: true
04:05:30 8200 media: false
04:05:30 Error threshold: 8%
04:05:30 Remaining tape: 403359744
04:05:30 A_GB: ar_block at 0x2B544951A000, size=2097152
04:05:30 A_GB: ar_block_enc at 0x2B544971E000, size=2097152
04:05:30 ADMS: reset library tape selection state
04:05:30 ADMS: reset complete
04:05:30 VLBR: not at bot: 0x9
04:05:30 VLBR: tag on label just read: "000021L3"
04:05:30 VLBR: master tag now "000021L3"
04:05:30 RLE: set kb remaining to 403359744
04:05:30 RLE: noticed nil label
04:05:30 ARVI: resetting volume id from nil to PAS-RMAN-018935
04:05:30 PF: here's the label at the current position:
Volume label:
Volume tag: 000021L3
Intro time: Tue Jun 02 17:00:51 2009
Volume UUID: d0e25812-ed54-102c-a34d-001143fd735c
Volume ID: PAS-RMAN-018935
Volume sequence: 1
Volume set owner: root
Volume set created: Tue Jan 26 23:32:25 2010
Media family: PAS-RMAN
Volume set expires: never; content manages reuse
Original UUID: d0e25812-ed54-102c-a34d-001143fd735c
Archive label:
File number: 5
File section: 1
Owner: root
Client host: merge01
Backup level: 0
S/w compression: no
Archive created: Wed Jan 27 00:08:56 2010
Marker: End of data
04:05:30 PF: at desired location
04:05:30 RCVW: volume "PAS-RMAN-018935" / vuuid d0e25812-ed54-102c-a34d-001143fd735c reserved for writing
04:05:30 CREA: tape position after open_archive() is 0001A1800000
04:05:30 GLMT: returning "000021L3", code = 0x0
04:05:30 IMF: inherited media family PAS-RMAN is content-managed
04:05:30 CREA: setting history tag to "000021L3" from volume label
04:05:30 RLE: overwrite invalid/blank/marker section
04:05:30 VLBW: on entry, l->tag = "", master tag = "000021L3", bot = 0
04:05:30 VLBW: setting voltag from "" to "000021L3"
04:05:30 VLBW: volume is content-managed
04:05:30 RLE: write volume PAS-RMAN-018935, file 5, section 1, vltime 1264566745, vowner root, voltag 000021L3
04:05:30 VSLW: set last write time for volume oid 20949
04:05:31 ULVI: set mh db volume id "PAS-RMAN-018935" (retid "000021L3"), volume oid 20949, code 0
04:05:31 ULTG: set mh db tag "000021L3" (retid "PAS-RMAN-018935"), volume oid 20949, code 0
04:05:31 RLE: set kb remaining to "invalid or unknown"
Volume label:
Volume tag: 000021L3
Intro time: Tue Jun 02 17:00:51 2009
Volume UUID: d0e25812-ed54-102c-a34d-001143fd735c
Volume ID: PAS-RMAN-018935
Volume sequence: 1
Volume set owner: root
Volume set created: Tue Jan 26 23:32:25 2010
Media family: PAS-RMAN
Volume set expires: never; content manages reuse
Original UUID: d0e25812-ed54-102c-a34d-001143fd735c
Archive label:
File number: 5
File section: 1
Owner: root
Client host: backup01
Backup level: 0
S/w compression: no
Archive created: Wed Jan 27 04:05:28 2010
Archive owner UUID: 9d92d00e-0368-102b-89f6-001143fd735c
Owner class UUID: edde6dc8-f857-102a-a357-001143fd735c
Backup piece name: 8sl4ft06_1_1
Backup db name: emrep
Backup db id: 3844670930
Backup copy number: not applicable
Backup content: archivelog
04:05:31 RCVW: volume "PAS-RMAN-018935" / vuuid d0e25812-ed54-102c-a34d-001143fd735c reserved for writing
04:05:31 ADMS: reset library tape selection state
04:05:31 ADMS: reset complete
04:05:31 SNP: using NDMP protocol version 4
04:05:36 FLDB: drive buffer flush to medium took 0:05 (min:sec)
04:05:36 BNPC: volume position "0001A181" added to s_vol_start_pos
04:05:36 BNPC: initial volume label "PAS-RMAN-018935" added to s_vids, s_last_section 1
04:05:36 BNPC: initial volume tag "000021L3" added to s_vtags, s_last_section 1
04:05:36 BNPC: environment variable DATA_BLOCK_SIZE = 64
04:05:36 BNPC: environment variable DATA_ARCH_UUID = f3ccd49e-ed7a-102c-be2b-001143fd735c
04:05:36 MGS: ms.record_size 65536, ms.record_num 0x0, ms.bytes_moved 0x0
04:05:36 SMWB: setting mover window for possible checkpoint during backup
04:05:36 MLIS: mover listen ok for local connection
04:05:36 APNI: a preferred network interface does not apply to this connection
04:05:36 DPNI: a local NDMP data connection is in use
04:05:36 BNPC: directing data service to connect to mover
04:05:42 BNPC: issuing NDMP_DATA_START_BACKUP
04:05:47 BNPC: started OSB NDMP backup of backup01 to tape1
04:16:51 MNPO: data service halted with reason=successful
04:16:51 SNPD: Data Service reported bytes processed 0x6DF20000
Opening device /dev/sg3 failed - access denied to /dev/sg* device file (OB scsi device driver)

Permissions problem on the drive for the user running the job.

C7 | Connection Failed - Access Denied - Invalid S...

Hi,
Whenever I am trying to connect to WLAN, it got connected but the moment I start browsing, it displays message 'Connection Failed - Access Denied'. Sometimes, it shows 'Invalid Server'. I am really not sure why it is happening as 3G is working fine in my phone.
If someone can help me to understand the problem and resolution to it.
Thanks-
Amit

Hey Amitbbb, Welcome to the Nokia Forums!
The apps SPB Wireless Monitor Lite and SPB Wireless Monitor may be preventing your phone from accessing the internet, if they have been downloaded to your phone before the Nokia Belle update. If possible, please uninstall these apps before updating to Nokia Belle.
If you are experiencing data connection problems after the Nokia Belle update, then please check if you had downloaded either of these apps earlier on your phone by browsing via your PC to Nokia Store: www.nokia.com/store > My stuff. If you can see either of these apps, then first try fix the problem by redownloading these apps on your phone:
Connect your phone with a USB cable to PC and ensure that you have Nokia Suite running.
In Nokia Store, select the name of these apps under My stuff and then select Download >Download on PC.
After the apps have been redownloaded, please reboot your phone and verify that you are able to browse the internet on your phone for example by opening www.nokia.com in your phone’s browser.
If you still get the same error message or if you not able to re-install these apps from Nokia Store for some reason, only then follow the remaining steps to manually disable these apps:
Close Nokia Suite via File > Exit.
Connect your phone to computer with a USB cable in mass storage mode. You can set this in the Notification bar via USB > Mass storage on your device.
Open Windows Explorer on your computer and open your phone’s mass memory drive (typically named Nokia Ovi Suite).
Go to folder private\101f7989\esock\ and delete following file if it exists: ip.wrlmonsnf_20042D1F.esk.
Close Windows Explorer, and unplug the USB cable after using the safely remove hardware and reject media function on PC.
Reboot your phone.
Verify that you are able to browse Internet on your phone.
If you want to reinstall SPB Wireless monitor, go to Nokia store to redownload it.
I hope this helps and that you manage to resolve your issue!
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Audit Log Fails Access Denied

Hi all,
We just recently installed SP1 for AQ6.0 and it has helped out alot. Fixed alot of our small issues, but seems to have brougt up a new one. Our Audit Log Management job is now failing every run. It is getting an Access denied error. Actually the error line is JobShell: Exception occurred when processing operation operation 0:103: \\ntapmd01\Plumtree5\PtAudit\audit 9-8-06 2.log (Access is denied). Running verbose dosen't help. I see that the job is running as owner Administrator and I am trying to copy the audit log to a shared network location, but this worked before. Nothing changed except for installing the SP. Any ideas?
Berney

First off, it seems like installing the patch reset the user account that ran the plumtree automation service. All I had to do was change the user who runs the automation service and that fixed it.
As far as service patch 1 goes we had alot of issues when we went to 6.0 with remote users opening documents. SSO redirect kept sending them back to the home page. We had issues with the Intrinsic Community Links portlet, protected excel files, along with some others I can't think of right now. Everything looked fine from the admin point of view, but users were going crazy. All of that went away with the service patch.
Thanks,
Berney

Launch Failed - Access Denied

I have just been looking through a failure report on zenworks inventory,
it seems that I have approx 30% of all my workstations have failed to
install a small script, this has worked fine on all the rest of them.
All the workstations are xp pro and as far as I know the same service
pack.
When I look on failure advanced report it is telling me...... The
network path or Access is denied (most of them say access is denied)
Whats the problem?
Thanks
Total5

Woo Hoo.... Cheers Shaun, try this
AXT_FILE 3.1
[Application Name]
Value=File and print sharing
[Application Caption]
Value=File and print sharing
[Application Path]
Value=\\Midzfd\DATA\IT\Applications\File_Printer\s netcfg.exe
[Application Flags]
Flag=Run Once
Flag=Force Reboot
Flag=Run As System User
Flag=Report Events
[Application Parameters]
Value=-v -l c:\windows\inf\netserv.inf -c s -i MS_Server
[Application Platform]
Flag=Windows 95
Flag=Windows NT
[Filter OS Version]
Type=Windows 95
Major Version=-1
Minor Version=-1
Revision Version=-1
Build Version=-1
Flag=Greater Than or Equal
[Filter OS Version]
Type=Windows NT
Major Version=-1
Minor Version=-1
Revision Version=-1
Build Version=-1
Flag=Greater Than or Equal
[Application Association Flags]
Flag=Force Run
[Application Report Output Flags]
[Application Report Event Flags]
[Application Version Number]
Value=5
[Application Report Event Flags For Log File]
[Application Report Event Flags For Database]
Flag=Distribute Success
Flag=Distribute Failure
Flag=Launch Success
Flag=Launch Failure
Flag=Terminate Process
[Application Report Event Flags For SNMP]
[Application Report Event Flags For XML]
Total5

BRARCHIVE from SAP failed: access denied

Hi!
I am facing with the problem that the online redo log backups from SAP endes with following error:
R0203I to
192.168.20.45\backup\abc\archive\abc...
R0278E Command output of 'E: && cd E:\oracle\abc\102\database && E:\usr\sap\abcSYS\exe\nuc\NTAMD64\brtools.exe -f copyfile
192.168.195.47\backup\gsr\archive\ABC initABC.ora s
ccess is denied.
0 file(s) copied.
R0280I BRARCHIVE time stamp: 2009-10-29 14.15.59
R0279E Return code from 'E: && cd E:\oracle\ABC\102\database && E:\usr\sap\GSR\SYS\exe\nuc\NTAMD64\brtools.exe -f copyfile
192.168.195.47\backup\gsr\archive\ABC initABC.ora sp
R0222E Copying init_ora to/from
192.168.20.45\backup\abc\archive\ABC failed due to previous errors
R0016I 0 offline redo log files processed, total size 0.000 MB
R0007I End of offline redo log processing: aebuhwjm.svd 2009-10-29 14.15.59
R0280I BRARCHIVE time stamp: 2009-10-29 14.15.59
R0005I BRARCHIVE terminated with errors
When I try from os-level with brarchive -c the redo log backup will be completed without any errors.
Any helpful information will be very appreciated!

> I am facing with the problem that the online redo log backups from SAP endes with following error:
> R0203I to
192.168.20.45\backup\abc\archive\abc...
> R0278E Command output of 'E: && cd E:\oracle\abc\102\database && E:\usr\sap\abcSYS\exe\nuc\NTAMD64\brtools.exe -f copyfile
192.168.195.47\backup\gsr\archive\ABC initABC.ora s
> ccess is denied.
> When I try from os-level with brarchive -c the redo log backup will be completed without any errors.
Yes.
The SAP system runs under user SAPService<SID>. That user must be created on the target server.
Markus

Conn. Failed Access Denied' Message

I only want to connect to the internet with my home network and I have set the n8 phone to do this.
Only thing is the phone keeps trying to access the internet and producing the above message this is using up the battery how do I fix this problem?
Thanks

Either your password is wrong or you use MAC filtering on the router or accesspoint.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Oracle GoldenGate Veridata Exception (access denied)

Hello all,
I have recently installed weblogic 12.1.3 and Goldengate Veridata server on a Linux box successfully, and then successfully created a domain server to administer Veridata. After opening Veridata Web console with the newly created User from Weblogic Server that has all the privileges of veridata administration, in the new connection wizard, veridata shows following exception.
OGGV-00184: Error message: com.goldengate.wallet.WalletException: OGGV-80002: Put credential for CONN..IRIS2 failed: access denied ("oracle.security.jps.service.credstore.CredentialAccessPermission" "context=SYSTEM,mapName=VERIDATA,keyName=CONN.IRIS2" "write").

You have the wrong java version which i suppose is java8 which is not supported for 12c yet so downgrade to java 7. Not sure what flavour your OS is I used this How to Install Java 7 (Jdk 7u75) on CentOS/RHEL 7/6/5 and downgraded java restarted my weblogic and everything worked as expected.

Nokia N8 Access Denied !

Hi, when i was deleted data and restored the factory setting. then i cant use wirelesslan or packet data!
it show me "connection failed. access denied"
pls help me

thanks for your help, i do hat but i still have problem... (

Access denied to maps

I have a nokia n8, i have downloaded all the software updates and the map updates, but whenever I try to go to maps get the message conn. failed access denied, I don't know why this is as I have wlan access at home i can open the maps but i am always at the mawson lakes interchange, i live some 40 kilometers south of this location, I don't have any other connection problems and often download games and apps from ovi store?
Peter
Solved!
Go to Solution.

@poider
Welcome to the forum!
Whilst realising that you are referring to South Australia can't remember whether Symbian Anna has been made available to you yet. Unfortunately if using this firmware you can no longer re-define an access point for positioning server = supl.mokia.com in Menu > Settings > Application settings > Positioning > Positioning server as you could in PR1.2
Have you tried Settings > Application Settings > Positioning > Positioning server > Server settings then tap on supl.nokia.com then change "Only in home network" to NO
Happy to have helped forum with a Support Ratio = 42.5

The system failed to merge, error code : General Access denied

The system failed to merge, error code : General Access denied. Could anyone help me on this

Hi,
It could be several things, I think it could be a good start with the following page:
https://blogs.technet.com/b/chrad/archive/2009/10/02/differencing-disks-merging-80070005-error-just-one-persons-lesson-learned.aspx
If that doesn't help you could check out the following technet page to see if it is a permission problem. (it is not exactly the same problem but one of our customers once had the same problem and we solved it with the follwing KB:http://support.microsoft.com/kb/2249906/en-us
Hope this helps you out.

Failed to start hibernate.target: Access denied

I upgraded my machine yesterday and the Hibernate item in kmenu->Leave are missing. also "systemctl hibernate" dont work:
$ systemctl hibernate
Failed to execute operation: Sleep verb not supported
Failed to start hibernate.target: Access denied
log:
Mar 08 22:50:56 arch polkitd[720]: Registered Authentication Agent for unix-process:2370:106040 (system bus name :1.86 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
Mar 08 22:50:56 arch dbus[363]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.87" (uid=1000 pid=2370 comm="systemctl hibernate -i ") interface="org.freedesktop.systemd1.Manager" member="StartUnit" error name="(unset)" requested_reply="0" destination="org.freedesktop.systemd1" (uid=0 pid=1 comm="/sbin/init ")
Mar 08 22:50:56 arch polkitd[720]: Unregistered Authentication Agent for unix-process:2370:106040 (system bus name :1.86, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Suspend works fine.
Last edited by ReiserFS (2014-03-09 12:35:46)

I've got this same problem. For me it's because I haven't got a swap partition (even though I thought I set this machine up with one...). Perhaps you also don't have a swap partition, or maybe it's not mounted? Anyway, I would start with the Swap page of the wiki.

Access Denied - Failed to Open Document

I've done a few hours of searching for a solution to my problem with no specific answer helping me.
I recently upgraded 63 various reports from Crystal Reports version 8.5 to Crystal Reports 2011 (using a Windows 7 box). I realigned all of the report fields, and ensured all the variables within the report worked as they did before. Basically all 63 worked like old. I deployed these reports to a Windows 2012 R2 server which has Crystal Reports 2011 installed (as well as Crystal Report Runtime for .Net Framework) and 4 out of 63 no longer work. When I try to open them with Crystal Reports 2011 it gives me an error 'Access Denied [line break] Failed to Open Document' In the Event Viewer for Windows it gives me the following details as to what happened.
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             crw32.exe
Application Version:                           14.0.4.738
Application Timestamp:                     4fd6ccca
Fault Module Name:                          crw32.exe
Fault Module Version:                        14.0.4.738
Fault Module Timestamp:                  4fd6ccca
Exception Code:                                  c0000005
Exception Offset:                                000cf0e5
OS Version:                                          6.1.7601.2.1.0.272.7
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
Here are the things I've done to try and troubleshoot/resolve it:
Re-upgrade the original CR 8.5 Report to 2011 and migrate it to server. (Didn't work)
Migrate the original CR 8.5 Report to Windows 2012 Server and try to upgrade it there (Same error on 8.5 report)
Repair/Reinstall Crystal Reports 2011 on Windows 2012 Server via Windows Control Panel->Uninstall Program tool (Didn't Work)
Repair/Reinstall Crystal Reports Runtime for .Net Framework on Windows 2012 Server via Windows Control Panel->Uninstall Program tool (Didn't Work)
Add three System Environment Variables to enable Crystal Reports Error Logging through CRLogger.dll (LOGGING_DIR = C:\CRLOGGING; LOGGING_ENABLED_ASSERT = 1; LOGGING_ENABLED_RUNTIME = 30)
Now..the error logging gives me error numbers, and which line of which .cpp file is encountering a problem, but that really doesn't help me because I don't have access to Crystal Reports Source Code. (Pasted below for those who are really curious).
I've seen Ludek or other SAP staff shut down discussions with some line about 'Report Development is not a ...' but I feel that this isn't related to how the report was developed and instead something in the application not jiving well with something else.
Any help or suggestions would be incredibly well received and appreciated.
Time Stamp
Thread ID
File Name
Line Number
Logged Data
Level
2015-4-24-12-48-43
3820
..\cserrinf.cpp
523
Error 31831 (..\..\src\data\preQEFileIO.cpp, 3578)
1
2015-4-24-12-48-43
3820
..\cserrinf.cpp
523
Error 31831 (..\..\src\data\preQEFileIO.cpp, 3847)
1

Hi Thomas,
Statistically speaking, 4 out of 63 reports isn't bad for a migration. So something in these 4 reports is different from the others. I've had this happen if there are images or an object inserted into the report and the update doesn't know how to handle that object.
The best way to try and find the problem is by process of elimination. Open the reports again in 8.5 and remove a couple of things at a time. Save it then open in 2011 and see if it fails or not. Continue doing that until the report actually opens. The problem could be anything from a formula or printer settings to attachments.
Good luck,
Brian

HT1178 I have failed to Map the Airport Time Capsule to my windows 7 HP laptop as a mapped drive, error message is "access denied"

I have failed to Map the Airport time capsule to my windows 7 HP laptop, i followed all the installation steps and i get the error message "Access denied, you do not have permission to access this device, contact network administrator"

Did you install the airport utility for windows?
Is the windows computer set to home as network location.. it will not work if it is set to work or public.
Is the TC setup with all SMB type names, short no spaces and pure alphanumeric. No apostrophe.
Can you ping the TC from your computer? Open a command window and type ping and the tc name or its IP.
No response you will never be able to get connection .. it is usually firewall problem. Turn off firewall and internet security.
If it pings then simply type the IP directly into explorer.. \\TCIPaddress. (eg \\10.0.1.1 if the TC is at default)
That is usually the most foolproof method.

Extraction failed access denied

Similar Messages

Maybe you are looking for