Extraction failing after source system and client copy
Hi all,
We refreshed our source QA system with a copy of production. And basically tried to "restore" the connection from our BW QA system. Some of the datasources can be extracted from BW, others fail with an error of "No transfer structure is available for InfoSource 0COSTCENTER_ATTR in the source system".
Trying to do the same thing with RSA3 in the source system, works fine.
The strange thing is it works for some objects but not others.
here's what we did:
1. System copy from R3 Prod to R3 QA
2. Client copy with R3 QA client 300 -> 200
3. Restore connectivity in BW QA to the R3 QA system (Using RSA1 -> Source System -> Restore)
4. Now some objects can be extracted in BW, others fail as I mentioned above.
I have regenerated the transfer structures in BW and R3.
All of these objects that don't work seem to work in RSA3 on the R3 system but not in RSA1 on BW.
All the SAP documentation is geared to copying the R3 source system and then restoring connectivity between BW and R3. I don't think any of it involves copying the client in the R3 source system - which might be causing our problems.
We are using an SAP delivered PDF and note 886102 mainly for direction.
SAP PDF is "How to... System Copy in SAP Business Intelligence System Landscapes".
Does anyone have any ideas?
Thanks,
Kevin
Hi,
can you isolate somehow the kind of DataSource which works and those who don't?
Master data / transactional or client dependent and not, delta or full....
To which R/3 client is your BW connected? when you succeed loading the data, is it coming from the right client?
RSA3: do you run it specifying your BW client in the target sys field? does it make a difference if yes or if not?
Are your RFC connections and partner profiles all right?
Check some IDOCs sent by BW received in R/3 and vice-versa (RSSEND, RSINFO, RSRQST..). Load a hierarchy (via IDOC)... verify that your IDOC have the correct partner settings....
let us know
Olivier.
Message was edited by:
Olivier Cora
Similar Messages
-
Logical System and Client copy
Hi Gurus ,
I just now finished ECC 6.0 successfully , I want to take the client copy . But i hacve one doubt , In client creation one TAB logical system is there , Kindly advice me how to create Logical system and steps .
Regards
SelvanHi Manjula ,
Below i mentioned the full detail about the error .
RFC destination for client copy in systems with Financials Basis (FINBASIS) component.
The system could not find any suitable RFC destination for processing for client 000. This note also appears if an RFC destination was found but this does not work. o RFC destination: FINBTR@ID3CLNT000 o Error text: Error during the retrieval of the logon data Proceed as follows to eliminate this error:
1. Start the wizard to create a new RFC connection or perform the following steps manually: 1. Create an RFC destination with the target ZK>source client of client copy (in this case 000).
2. Check whether the RFC destination works in transaction SM59. To avoid errors when assigning the password or the authorizations of the RFC user, use the authorization test Test -> Authorization.
3. Enter the RFC destination: - Transaction: FINB_TR_DEST (Destinations for Transport Methods of the Financials Basis) - Client: 000
4. Start the client copy again.
Kindly advice me
selvan -
DS-BW:Data load called from BW failed after Source System program_id change
Hi,
In my BW 7.0 instance I have Data Services 3.2 as source system.
Some time ago I have changed instance of Data Services I am connecting to - I just changed PROGRAM_ID in RFC connection parameters for that source system.
Since that time when I am trying to execute infopackage to call a job I am getting following error:
OCI call <OCISessionBegin> for connection <xxxxxxx> failed: <ORA-01017: inv
where <xxxxxx> is Oracle database connection name for Data Services instance I connected originally.
What can be reason for that?
Regards,
akIn Data Services Server Manager on DS box there were configurations for job server I connected originally and for the other job server. After removing original config it works fine.
ak -
How to Create an R/3 source system and load data from there
Hello All,
Till now I have only worked with Flat files. I want to create an R/3 source system and extract data from there on to my Info Providers.
Does anyone has detailed steps for that. I am using BW 3.5 system
Thanks n Regards,
Abhishek1. Type Transaction WE30. Check iDoc types
2. Type Transaction SM59. Maintain RFC destinations
a.) Open the RFC Destinations. b.) Find your Source System and double click on it. c.) Technical setting should contain information regarding yoursource system d.) Logon Information should contain source system client and name & password for you remote logon. We use RFC_SAB for BW logon to R/3 and RFC_AAE for R/3 logon to BW. Password for both is always xxxxxxx. e.) Execute your 'Test Connection' & 'Remote Logon'. You should NOT be prompted for a password, if you are then the logon info is incorrect. f.) Repeat above to verify RFCs for other systems (CRM etc)
3. Type Transaction WE21. iDoc Processing Ports.
a.) Select 'Ports' and then 'Transactional RFC'. b.) Click on the Port # for you source system. c.) Verify description & SAP R/3 version.(BW 2.1C should be release 4.x) d.) RFC Destination should be one created in SM59. If non-existent then create one
4. Type Transaction SE16. Data browser (for R/3  BW Connections)
5. Type Transaction SM30. Msg Types & Assignment to iDocs
Enter 'EDIMSG' in the Table/View field. Click on the 'Enter Conditions' option for Restrict Data Range. Click 'Maintain'. Select Message Type. Then enter 'RSSEND' in "From' field. Verify that the Basic Type matches what is in your RSBASIDOCtable for each of your connections. If any are missing any entries you must create them as follows: Create another session and type Transaction WE30. Enter IDoc Type (ZSBAXXX) in Obj. Name field (Suggestion: Start new type with 'ZS' + Transfer Structure Prefix + (3)#'s) Select Create. Select "Create from Copy'. Enter 'RSSEND" in 'Copy From' field Enter Description (i.e. IDoc Type for BW Development) Execute (Green Check). Repeat for other missingentries.
6. Go to the SM30 main screen. Clients Overview
Enter 'T000' in the Table/View field. Click 'Maintain'. Verify correct Client and Description. If incorrect enter.
8. On BW Type Transaction WE20. Partner Profiles
9. On R/3 Type Transaction WE20. Partner Profiles
10. Check all is correct -
Problem in extracting data from source system
HI
I am comparing source system and data in bW for a particular datasource.In this process in source system transaction RSA3 when i am trying to extract data its not showing the exact count.I couldnt able to understand the setting options like Datarecord/calls & Displa extr.calls in transaction RSA3.can some one assist in this..?Vara Prasad,
I do know about the popup , but then the popup is displayed only AFTER the extraction completes. Asusming that you have about 10 million records - I cannot find the number of records without actually extracting it and my RSA3 will fail because it is too large of RSA3 , I was talking about if there was a method by which I could fins the number of records alone without extracting the data / running RSA3.
Also if your extractor has 20,000 records , and if you set 10 datapackets of 1000 each the popup will display 10000 whih is incorrect and you would have to increase the data packet / package size to finally arrive at the right number... -
Export/Import and Client Copy
Hi All,
Could you please help me with what are the major differences between Export/Import...client copy...and a System Refresh.How they differ from each other.
Regards
RajeshHello Rajesh ,
I have capture some data from SAP Help :
Local Copy: Copying Clients Within a System:
You can improve the performance of the client copy by, for example, by excluding tables or packages, with Edit -> Expert Settings.
You can exclude tables from the client copy, for example if they are not relevant for the target client, in the Tables tab
Copying Clients Between Systems (Remote Copy):
The same product is installed, with the same release, in both systems
The client copier can copy a client into another system. The systems can be on different platforms. You can change the client number.
When you copy a client from one system to another, the data is transferred directly via the RFC interface - there is no intermediate storage on hard disk.
Transporting Clients Between Systems ;Client export (SCC8):
The client copier can copy a client into another system, which can be on a different platform. You can change the client number.
You are no longer required to transport clients before you can copy them between systems. You can make a remote copy instead.
Up to three transport requests are created, depending on the selected copy profile and the existing data.
The transport request for texts is e.g. only created if the source client contains customer texts.
<sid>KO<no> cross-client data
<sid>KT<no> client-specific data
<sid>KX<no> texts and forms
The data export is performed automatically asynchronously. The output of the export includes the names of the transport requests that are to be imported.
Import transport requests into the target client (STMS)
Choose one of the transport requests of the client transport in the Transport Management System (TMS). The other transport requests belonging to this client transport are then automatically added in the correct order.
Import these transport requests into the target client.
client import postprocessing (SCC7)
You need to perform postprocessing activities to adapt the runtime environment to the current state of the data.
Copy by Transport Request :
This function transports customizing changes that have been recorded in a transport request between two clients in a system.
You can choose whether you only copy the object list of the request or also the object lists of unreleased tasks in the request.
Entries in the target client are overwritten or deleted according to the key entries in the transport request.
Choose Administration -> System administration -> Administration -> Client admin. ->Special Functions -> Copy Transport Request.
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/69/c24c0f4ba111d189750000e8322d00/frameset.htm">For more info Click here</a>
Regards ,
Santosh Karadkar -
Both Source system and BI system under BI tab not comming under SAP tab
Dear Experts
we have installed ECC6.0EhP4 ABAP and Netweaver BI7.0EhP1 ABAP,with AIX6.1,Oracle11G, I am trying to make connectivity between two system
its done successfully,But I am facing following error
1.in BI and ECC i am seeing source system and BI system under BI tab, its not coming under SAP tab,and BI consultant saying they are not able to extract the data from ECC ,they want source system Under SAP tab,how to solve this
2.In BI system they unable to execute the query ( I have applied GUI7.20 BI patch and Query patch) for this do we need JAVA stack?? kindly advice me
Regards
krishna
Edited by: krishna murthy on Mar 31, 2011 8:36 AMthank you very much after gone through that Snote 1087980
problem got solved
Enter the following values
I_BIW_LOGSYS GDVCLNT200
I_OLTP_LOGSYS GDVCLNT200
I_FORCE_DELETE <X>
< DO NOT ENTER ANY VALUE IN THE FIELD - RFC target sys !!!!! >
Go to RSA1-> Source systems in the BI system connected to the ECC
system.
Select the ECC source system and select RESTORE in the right click
menu.
thanks
regards
krishna -
Error in Process Chain while extracting data from source system
Hi All,
Dail we are facing problem while retrieving the data from source system for the data source 0TB_AMOUNT1 in the process chain, it is giving error "Function module BANK_TMC_API_SIM_GET does not exist Furnction module". when I repeat the step than it is going fine.
Please let me know why this error is coming for first why it is not coming after repeating the step?
Thanks & Regards,
Murali.Hi Murali,
Hope you are doing good..
Is it a full or Delta load on a daily basis? Did you check if the FM exists in your system?
Did you try debugging the load in source system and check if the extractor is trying to call FM you mention.
If possible please post the exact error message you are receiving so that we could get an idea whats the error and why you are encountering it.
As of now what i can suggest is, go to RSA2 in source system, give the datasource name and check if the extractor code has FM in it.
Regards,
Anil Pragada. -
BW Load Failed at Source system
Hi Experts,
I have situation where my extraction in the source system was terminated(Job termination log is below).
i would like to know the steps to re-execute the extraction process in a particular chain
as the repeat button is not available.
( Can i go to the particular infopackage and reschedule the package in schedule >)
Waiting for reply.....
Date Time Message
31.03.2009 03:11:58 Job started
31.03.2009 03:11:58 Step 001 started (program SBIE0001, variant &0000000059428, user name BWALEREMOTE)
31.03.2009 03:11:58 DATASOURCE = ZEXTRACT_ACTUALS
31.03.2009 03:11:58 *************************************************************************
31.03.2009 03:11:58 * Current values of selected profile parameter *
31.03.2009 03:11:58 *************************************************************************
31.03.2009 03:11:58 * abap/heap_area_nondia......... 2000000000 *
31.03.2009 03:11:58 * abap/heap_area_total.......... 2000000000 *
31.03.2009 03:11:58 * abap/heaplimit................ 40000000 *
31.03.2009 03:11:58 * zcsa/installed_languages...... E2 *
31.03.2009 03:11:58 * zcsa/system_language.......... E *
31.03.2009 03:11:58 * ztta/max_memreq_MB............ 64 *
31.03.2009 03:11:58 * ztta/roll_area................ 6500000 *
31.03.2009 03:11:58 * ztta/roll_extension........... 2000000000 *
31.03.2009 03:11:58 *************************************************************************
31.03.2009 03:11:58 1 LUWs confirmed and 1 LUWs to be deleted with FB RSC2_QOUT_CONFIRM_DATA
31.03.2009 11:47:24 ABAP/4 processor: DBIF_RSQL_SQL_ERROR
31.03.2009 11:47:24 Job cancelledHi Veeru,
Check here......
DBIF_RSQL_SQL_ERROR error
Re: Shortdump with Runtime Errors 'DBIF_RSQL_SQL_ERROR'
Re: error in data loading
Thanks,
Vijay. -
Different number of data records in source system and BI system
Hi all,
I have been using datasources 0HR_PA_0 and 0HR_PA_1.
When I run and check the records in source system via RSA3 there are 4893 and 360 records respectively.
When I extract the records into my 0PA_C01 cube, however, 3058 and 249 records are coming respectively.
Furthermore, when I create a personnel record in source system, it is not extracted into BI cube.
What may be the reason?
I am looking forward to your suggestions.
Regards,
DilekSrinath,
I've created many new personnel records in source system and these records are displayed in the list of RSA3.
However, these newly created records are not reflected in BI cube when I extract data via the specified datasources.
I've checked whether there are some filters defined, however no filter seems to exist.
By the way, I am using full upload; no delta!
Regards,
Dilek
Edited by: Dilek Ersoz on Aug 14, 2009 1:45 PM -
Activites after source system refresh
Hi all,
we made source system refresh recently.
When iam running INIT I am not able to get the data ,but in rsa3 data it is available
Now I am not able to retrive the data from source system for SD data sources like 2LIS_02_ITM.
Can any one tell me what type of activities i need to do after source system refresh for LO data sources.
Thank
PruthviHi Pruthvi,
As you mentioned about refresh, it would be a system other than Production system.
Delta Loads:
1. Whenever a refresh happens from the production, the delta pointers are disturbed.
2. You need to re initialize the delta pointer for the DS you mentioned.
3. If it is for the testing purpose of the Delta functionality, you may intialize the delta pointer 1st and then ask for postings of data in the ECC side.
4. Once the postings are done, you would see data in Delta Queue in RSA7 in source system.
5. Now run the Delta InfoPackage so as to fetch this data from the Delta Q of SS to the BW system.
Full Loads
1. If you are expecting a full load (Historical data), you need to first fill the Setup tables (in Background only) in the SS.
2. Once the Setup table fill job is completed in SS, you may execute a Full InfoPackage in order to get this full load.
Let me know if this helps..
-Bhushan. -
How to create UD Connect Source system and datasources.
I am currently working on BI 7.0 and I need to report on Standard Queries on xPD (Extended Applications Product Defination)
In the BI Cont library it states the data for this application is fetched using UDI rather than Table Extraction. Can anybody please help me with documentation on Steps for creating a UD connect Source system and UD Datasources and how I should proceed.
Edited by: Amit Pal on Feb 19, 2008 6:17 AMHi,
Pls chk this link;
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/icc/bw-udc-jdbc%20universal%20data%20connect%20jdbc%20interface.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/11cfa83d-0401-0010-9597-d3b7f487d72d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f094ba90-0201-0010-fe81-e015248bc5dd
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff
http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/frameset.htm
hope these helps,
Regards
CSM Reddy -
Ags_work_incident_create_app - Unable to maintain system and client
Hi,
When creating a support message from the Incident work center, the fields system and client are greyed out and thus not maintainable.
I have no problems creating support messages using the SAPWEBGUI or through transaction NOTIFCREATE, it is only when using the work center. I do not have any other issues in the workcenter, I can display and change support messages.
I have check the security settings and run a security trace which did not come up with anything.
Any advice as to why these fields are greyed out would be greatly appreciated.
ThomasAuthorization problem, issue solved.
-
Service Desk: System and client missing when creating a message.
Hi Experts,
I would like to find out if anyone has encountered this problem before. The system and client fields were blanked out and I am unable to select/create the system when creating a message. Thanks!Hello Wein,
If the system/client are grayed out in the workcenters, it is because when creating your BP you've probably created it only for a single system/client. Try to update your BP with another system (tx. BP_GEN).
Hope this will help.
Regards,
Stéphane.
Oups didn't see that the question was marked as answered...
Edited by: Stephane BUSTARRET on Aug 5, 2010 2:40 PM -
Hi
I checked many treads and still I couldn't get a satisfactory explanation to the difference between Business System and Client. I read in help.sap site that multiple business systems can be assigned to a single technical system and also each numbered client of an SAP system is a Unique Business System ? So are client and business system one ? If so why use it interchangably ? And if many business systems can be assigned to the technical system how do we specify a related Integration Server ? As I understand only one Business System can be assigned Integration server. So if we assign many business systems to one technical system then how can we have related Integration server for all ? I couldn't get a satisfactory explanation to this doubt in any thread in this forum
Midhun>>each numbered client of an SAP system is a Unique Business System ?
It could be. But it is not necessary that each client of SAP system is communicating with PI. If it is then there will be one Business System for each client.
>> So are client and business system one ?
No. Client is more substantial category in SAP system. Business system just defines the logical name to these clients if they communicate with PI.
>> If so why use it interchangably ?
Actually they can't be used interchangably always. The only relation is that for each client of SAP system, there could be only one Business system.
>>And if many business systems can be assigned to the technical system how do we specify a related Integration Server ?
For related Integration Server name, you need to select the PI Business system name which would communicate with your business system. For a single SLD scenario you will see PI Dev, Q and Prod business systems.
>> As I understand only one Business System can be assigned Integration server.
Correct. Its a PI Business system.
>> So if we assign many business systems to one technical system then how can we have related Integration server for all ?
For all Business systems of 1 technical system, you need to select the same PI Business system name.
Regards,
Prateek
Maybe you are looking for
-
How we can block creation of PM order from non released notification
Hi , how we can block creation of PM order from notification if notification is not released. Regards AM
-
Adobe Reader tries to open all files even Excel and Word docs.
When I try to open files that are sent to me, the Adobe Reader tries to open them all instead of an Excel file getting opened automatically by Excel and a .doc being opened by Word. The message I get by the Reader says it cannot open it, of course. (
-
I downloaded a new book and now it won't let me copy it to my nook.
Our computer crashed and we had to go back to factory settings to get it back on. I had to re-install Adobe Digital Editions to borrow books from my library. I downloaded a new book and now it won't let me copy it to my nook. I keep getting "not a
-
'FND_SESSION_MGMT.ATTACH_SESSION' must be on enabling Passivation
The issue is related to Activation/Passivation. We have a AM which is based out of BI RTD Schema, which does not have supporting fusion state management schema like FND_SESSION_MGMT, FND_GLOBAL and PX_TXN related packages/procedures. But during appli
-
Set up delivery report on 6700 slide
My misses has just got a 6700 slide but I can't find how to set up delivery reports or view the memory card. Im sure it very obvious but any help will be very appreciated Thanks