Extraction failure and then picked up due to IDOC setting on source system

hi All,
Just give one master data Company Code load as an example. We run the data load every night around 12 though Process Chain. When we checked the monitor, find that it ran twice, 1st time, it ran at 12 which was supposed to run, but it failed with red error and the red error msg is:
"IDocs were found in the ALE inbox for Source System that are not updated. Processing is overdue."
then it ran again at 07:45:55 which was successful with green light. We guess this problem is caused by IDOC setting on the source system. Run WE02 on the source system, expend Inbound IDocs folder and then expend RSRQST folder, find status 64 which indicates the yellow status.
Can anyone explain here why the extraction failed 1st time around 12am due to IDOC setting on the source system, and then the run was picked up around 7am successfully?
Thanks in advance!

Hi Kevin,
this is really a strange behaviour. What I could imagine: it could be temporary network issue or performance issue or system unavailability on the r/3 source system side. maybe you could check if other processes/jobs on R/3 were canceled, or if there is any system log available at the time concerned.
Lilly

Similar Messages

If I preorder an iPhone 5 will it arrive at my house on the 21st or is that when it'll ship? I would like to have it the day it comes out so if it would be faster to order it online and then pick it up from the apple store, let me know! Thanks

If I preorder an iPhone 5 will it arrive at my house on the 21st or is that when it'll ship? I would like to have it the day it comes out so if it would be faster to order it online and then pick it up from the apple store, let me know! Thanks

My experience is with the iPhone 4S and the "new" iPad, both of which I ordered early on the opening pre-order day. In both cases the wording from Apple during the media event was "pre-orders will start on ABC date for delivery on XYZ date" which was also the same day they were to go on sale in stores. In both cases, the UPS truck rolled up earlier than usual XYZ date as promised to hand me my new iPhone/iPad. In both cases there were instances of confusion due to some pre-order confirmations stating incorrectly "SCHEDULED SHIPPING DATE: XYZ". In both cases that caused much fear, panick, and trepidation that fed upon itself as it permeated a widely scattered forum linked community of "adults" that seem to collectively revert to a state of childish impatience and ultimately child-like glee as they obsessively refresh their dedicated tracking browser window; become convinced that there is no hope of escaping the dread delayed shippment, and then finally receive their new toy exactly when they were supposed to. Not that I personally would ever succumb to that of course. Er uhm ... it's just what I've seen you know .. nothing I can really relate to.

Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).

Hi,
Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
I have done some Google and found that we need to add something in Essbase.cfg file like below.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
Possible Problems
Analytic Services could not lock enough blocks to perform the calculation.
Possible Solutions
Increase the number of blocks that Analytic Services can allocate for a calculation:
Set the maximum number of blocks that Analytic Services can allocate to at least 500.
If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
Stop and restart Analytic Server.
Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting.
Determine the block size.
Set the data catche size.
Actually in our Server Config file(essbase.cfg) we dont have below data added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work? and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
Regards,
Naveen

Your calculation needs to hold more blocks in memory than your current set up allows.
From the docs (quoting so I don't have to write it, not to be a smarta***:
CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
Example
If the essbase.cfg file contains the following settings:
CALCLOCKBLOCKHIGH 500 CALCLOCKBLOCKDEFAULT 200 CALCLOCKBLOCKLOW 50
then you can use the following SET LOCKBLOCK setting commands in a calculation script:
SET LOCKBLOCK HIGH;
means that Essbase can fix up to 500 data blocks when calculating one block.
Support doc is saying to change your config file so those settings can be made available for any calc script to use.
On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact.

R3 to BW Extraction fails: Non-updated Idocs found in Source System

We load data from R3 to BW and this process has been successful for the past few days except last night. The error msg is listed below in between two dashed lines:
Non-updated Idocs found in Source System
Diagnosis
IDocs were found in the ALE inbox for Source System that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
I checked the system connection by right click the source system in the Source System page on BW and selecting "Check" and "Customizing for Extractors" from the context menu and find everything works fine.
Any idea about the IDOC thing?
Thanks

hi Subray/Bhanu,
With WE05, find some records with yellow status. How to find some missing data here?
With BD87, under BW system folder, there are two folders:
1. IDocs in outbound processing
2. IDoc in inbound processing
Under 1st folder, there is one yellow status folder called "IDoc ready for dispatch (ALE service)", continue to expand another folder called CREMAS under it, there is a blue information line which is "Receiver found , Data filtered , No conversion , No version change".
Under 2nd folder, there is one yellow status folder called "IDoc ready to be transferred to application", continue to expand other two folder under it called "BBPIV" and "RSRQST", find there is a red flash status line which is "No resources, immed. processing not possible: Too few free dialog work" under these two folders.
I need to go ahead to select these two red flash status lines and then press the Process button at the top bar?
Thanks
Message was edited by: Kevin Smith

Issue updating to CS6. Extracts files and then nothing happens.

I went on the Adobe site, selected to update to CS6, downloaded the Akamai Downloader as requested, clicked download the bundle, the files extract, the window closes and then nothing happens.

As a work around please use a direct download link instead of the download manager by using the links on this page: Download CS6 products (you might have to change the language at the bottom depending on your country)

OB52 :- Open and Close Posting periods Due to not modifiable of PRD system

Dear All,
Due to not modifiable status two transaction could't be done in the PRD System.
This is IMG activity under the following.
1. OB52 :- Open and Close Posting periods (FA -> FA Global Setting -> Document ->Posting -> Open and Close Postinfg periods
2. OB08 :- Enter Foriegn exchange rate. (Gen Settings) Enter foriegn exchange rate
These transaction are to be executed regularly and directly in the ECC6.0 Production system is not possible due to non modifiable status.
Please help me regarding this issue

Check Note 77430 - Customizing: Current settings
Markus

Multi mapping before BPM and then message routing to different IDocs

I am working on PI 7.0.
I have a scenario where a message from a third party needs to be split and then mapped to multiple IDocs in the target. This decision happens based on an RFC call to SAP ECC. Before the message passes to BPM, I have done a multi mapping to make the RFC call and split the message into multiple messages. Subsequently I have taken a multi line container inside the BPM to receive these messages and process them Parforeach and then a switch is applied to handle the rest of the scenario.
Problem is when I am trying to execute the scenario, it fails in first step(multi mapping) before the BPM, it is not able to create the node for the multiple message.
To explain a bit more, Message type say M1 is linked to Message interface MI1_OB. Then I have created an abstract message interface MI1_ABS and made it as 0---unbounded. Similarly in the message mapping I have changed the occurrence of the target message type (same as source message type)

Hi Ambrish Mishra,
Please check "Performing Several Multi-Mappings in a Series" [Link|http://help.sap.com/saphelp_nwpi711/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/frameset.htm] . According it, second mapping should be able to accept this structure as input
<?xml version="1.0" encoding="UTF-8"?>
<sm:Messages xmlns:sm="http://sap.com/xi/XI/SplitAndMerge">
<Message1>
</Message1>
<MessageN>
</MessageN>
</sm:Messages>
Regards,
Raghu_Vamsee

I have a factory unlocked 4s I'm haveing trouble with the mms withI have a straight talk I'm useing the sim card swap with tmoblil sim card I'm following the insructions but it works for a while and then its gone. I've set the settings at least ten times

I have a factory unlocked 4s I'm having trouble with the mms with straight talk I've been useing the sim swap system with tmobile i have put the settings in five times. The setting won't stay it works for a while and then it's gone. I'm not in a good coverage area but when i put the settings in i make sure i'm getting a good signal or near wifi. any suggestions would be great.

Congrats on your recent upgrade actionkatie! I am sorry to learn of the difficulties you are experiencing with your Samsung Galaxy S4. Let's get to the bottom of this because we want you to love your phone.
I understand you have done all necessary troubleshooting steps that should have enabled you to send messages to iPhone users without them having to disable iMessage. Have you tried contacting Apple Support regarding the inability to send a text message to iPhone users? Apple can be reached at (800) 275-2273.
In addition, do you get a certain error message when your WiFi stops working? Have you verifed that Auto Switch network is disabled? To disable this setting simply to go Settings > Wi-Fi > Tap the Menu Key(to the left of the home button) > Select Advanced and it is called `Auto network switch. If you are still experiencing difficulties, please feel free to reach out to us for further assistance.
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

No IDOCS arrived from Source system to BI for generic extraction

Hi All,
While loading data from r\3 generic data source to BI, I am facing the below problem.
1. Using Full Load:-
The request from r\3 to psa turns red after a while. The request monitor says:
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
Details Tab shows : request green
Under that Extraction tab shows red
missing messages.
Transfer (IDocs and TRFC): Errors occurred .
Request IDoc : Application document not posted
I ran Transaction BD87,BD73 and execute with proper selections.
Upon checking the idoc in source system Their status is 51 , which says
Diagnosis
The control parameters for communication with the BW server are not
complete. A BW PlugIn upgrade could be the cause of the problem.
System response
Procedure
Depending on the Release of the BW server, proceed as follows:
BW Server Release 1.2B: Source system: Update InfoSource metadata
BW Server Release >= 2.0A: Source system: Activate.
Manually i tried to push the idocs in the BW and source system using TRF but i dint found any records???
Soruce system connection is fine. Profile parameters are set properly and its active .. But still am getting the same problem.
Many thanks, I'll applicate your help.!
Rakesh

Hi
I am also facing the same problem. This happened after restoration of the original system with a copy of the production.
I am not able to get the IDOC posted in the source R3 system.
I did a debug and it failed when verifying the table, RSBASIDOC.
There appeared to be some missing records which need to be inserted.
I can't find a way to insert the missing record and since then, I am not able to proceed.
Have you resolved the issue?
can you share how it can be overcome?
Thanks a lot

ECC6.0 upgrade and BW steps for mapping the new ECC6.0 source system

Hello gurus
We are upgrading from R3 4.6C to ECC6.0. We use BW 7.0 SP 18. We will create the new ECC6.0 source system in BW, replicate metadata and everything. The question is how do we copy or reassign the existing objects pointing to our current 4.6c dev system (transfer rules, transformations, infopackages, process chains) to point to the new ECC6.0 dev system ? As a note, we also need to keep the current 4.6c source system objects until go-live o ECC6.0.
What is the common practice in such a case ? I am sure we are not unique...
A prompt response would be appreciated.
Thank you all.

So the plan is to copy dev R3 and upgrade that - then Q r3 copied and upgrade that - then upgrade directly prod R3?
If so - then if it were me - I would firstly prove all this in a sandbox environment where BW dev points at an upgraded sandbox R3 ecc
ie same logical system
Then once that is proved I would organise downtime of BW development for a few months whilst the d-q-p ecc happens
Then when they copy dev r43 to ecc r3 i would then just point BW dev at the new ecc box and go from there (ie clear the deltas - change the logical system name to the new ecc box - replicate meta data - transtru all the datasources - run the process chains nothign to worry about)
However if you cant afford the down time - you may have to have an alternative transport route - ie copy dev BW to a another dev bw box and have an alternative path to production for issues
Then once everything is upgraded redo the changes through d-q-p to get the transports back in line (thats what we did)

IP failed due to errors in CRM source system

hi
After executing IP full load for data source 0crm_oppt_h, i was unable to get the records( 0 records from 0). i checked in crm dev side in rsa3 , i am able to get the records there. so i have deleted the datasource and replicated once again. After activating update rules and transfer rules properly i have scheduled the IP, i am getting error message as ' error occured in source system '.
I have no selections is IP. I have checked the Idocs, trfc and the source system is connection is ok
I have checked the job in source system , It is cancelled. the job log is given below. I want to know how to correct this and what the steps i need to take futher. I am new to CRM . Please guide me
'You are not participant in the private activity CRM_ORDER 027 E'

hi
After executing IP full load for data source 0crm_oppt_h, i was unable to get the records( 0 records from 0). i checked in crm dev side in rsa3 , i am able to get the records there. so i have deleted the datasource and replicated once again. After activating update rules and transfer rules properly i have scheduled the IP, i am getting error message as ' error occured in source system '.
I have no selections is IP. I have checked the Idocs, trfc and the source system is connection is ok
I have checked the job in source system , It is cancelled. the job log is given below. I want to know how to correct this and what the steps i need to take futher. I am new to CRM . Please guide me
'You are not participant in the private activity CRM_ORDER 027 E'

HT204266 Is Apple going out of business. Or is someone undermining the corporation. The App Store is supposed to be a selling and marketing tool. Current version is imbecilic at best. Do a search and then pick an item look at it and if you need to go back

This is with regards to the App Store. Go to search and execute it. With a broader question you can get in the hundreds of products.
Now go through them one at a time as this is the only way to view.
Interested in an item half way down the list. You look at details.
It is not of interest. Go back to the search. Guess what you are thrown back into the beginning.
Now if this does not turn you off do not know what will.
Why are the developers of software not screaming. What about the users.
This has been going on since the introduction of system 6.
How long can this type of incompetence continue.
Has upper management short sold shares so that they can make a bundle when the shares tumble.
Such incompetence can only ride the coat tails for so long. Then the time to pay the piper comes
A sorry customer

Tell Apple
Apple - iTunes - Feedback

I synced photos to my 16GB iPhone 5s and then unsynced them due to storage space. now the photos don't exist on my device but they're still taking space and i don't know what to do?

please help.

You uncheck the music in your iTunes library on your computer and along with sync only checked songs and videos selected under the Summary selection for your iPhone sync preferences with iTunes, only checked songs in your iTunes library will be transferred to your iPhone or remain on your iPhone and the unchecked songs in your iTunes library that are currently on your iPhone will be removed when syncing.
Or make use of iTunes playlists and choose selected playlists, albums, artists under the Music selection for your iPhone sync preferences with iTunes and select the playlists below that you want transferred to your iPhone.

Extract Title and specific table of content/pages in set of PDF's

I need to extract the title of each PDF and a specific content and its pages. For example i have a folder full of PDF's and i need to find in the Table of Contents a heading called Enhancements if there. If Enhancement content is there copy the Title of the PDF usually on first page and copy the Enhancement section and place in another PDF as chronology of enhancements.I have AA Standard X
What tool can do this?

You could certainly use the SDK to write a custom plugin to Acrobat (in C/C++) that would do what you require. It's not trivial, however.

Portal is not picking any data & also not updating the source system

We are upgrading from 4.6c to ECC 6.0
We are facing lot's of issues. We have some par files running fine in the portal connected with 4.6 and portal ver is 6.0. The same par files are failing to get data from ECC 6.0. This is also 6.0 portal. Can any one help me on this. This is urgent.
Here is the log.
#1.5#000BCD4305DF00830000001200000CA000043589F1AF3141#1184766488509#com.sapportals.wcm.util.logging.CatchBlockHandler#sap.com/irj#com.sapportals.wcm.util.logging.CatchBlockHandler.UMPropertyManager#C0580JAP#753##DCPORTSBX01_NWD_24366050#C0580JAP#9d98a370353411dcb970000bcd4305df#SAPEngine_Application_Thread[impl:3]_0##0#0#Error##Plain###[ECB] colon character not allowed in ncnames: com.sapportals.wcm.util.xml.SimpleSerializer$IllegalXmlNameException: colon character not allowed in ncnames
at com.sapportals.wcm.util.xml.SimpleSerializer.checkLegalName(SimpleSerializer.java:709)
at com.sapportals.wcm.util.xml.SimpleSerializer.checkLegalNCName(SimpleSerializer.java:688)
at com.sapportals.wcm.repository.manager.um.UMPropertyManager.addUmProperties(UMPropertyManager.java:95)
at com.sapportals.wcm.repository.manager.um.UMResource.getUMProperties(UMResource.java:191)
at com.sapportals.wcm.repository.manager.um.UMResource.getResourceProperties(UMResource.java:154)
at com.sapportals.wcm.repository.manager.um.UMPropertyManager.getProperties(UMPropertyManager.java:42)
at com.sapportals.wcm.repository.manager.um.UMPropertyManager.getProperty(UMPropertyManager.java:66)
at com.sapportals.wcm.repository.ResourceImpl.internalGetProperty(ResourceImpl.java:3731)
at com.sapportals.wcm.repository.ResourceImpl.getProperty(ResourceImpl.java:1422)
at com.sapportals.wcm.service.xmlforms.validation.Datauser.toSuffixString(Datauser.java:230)
at com.sapportals.wcm.service.xmlforms.validation.PropertyLocalizer.localize(PropertyLocalizer.java:231)
at com.sapportals.wcm.service.xmlforms.transformation.TransformationHelper.localizeProperties(TransformationHelper.java:64)
at com.sapportals.wcm.service.xmlforms.transformation.Transformation.render(Transformation.java:372)
at com.sapportals.wcm.service.xmlforms.transformation.Transformation.render(Transformation.java:155)
at com.sapportals.wcm.rendering.resource.cm.XMLResourceRenderer.renderXMLResource(XMLResourceRenderer.java:319)
at com.sapportals.wcm.rendering.resource.cm.XMLResourceRenderer.render(XMLResourceRenderer.java:146)
at com.sapportals.wcm.rendering.collection.cm.CollectionGridRenderer.renderResource(CollectionGridRenderer.java:453)
at com.sapportals.wcm.rendering.collection.cm.CollectionGridRenderer.renderEntry(CollectionGridRenderer.java:413)
at com.sapportals.wcm.rendering.collection.cm.CollectionGridRenderer.renderUI(CollectionGridRenderer.java:144)
at com.sapportals.wcm.rendering.collection.LightCollectionRenderer.renderAll(LightCollectionRenderer.java:597)
at com.sapportals.wcm.rendering.control.cm.NeutralControl.render(NeutralControl.java:171)
at com.sapportals.wcm.rendering.layout.cm.SimpleLayoutController.render(SimpleLayoutController.java:39)
at com.sapportals.wcm.rendering.control.cm.WdfProxy.render(WdfProxy.java:1771)
at com.sapportals.wdf.layout.HorizontalLayout.renderControls(HorizontalLayout.java:42)
at com.sapportals.wdf.stack.Pane.render(Pane.java:155)
at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:67)
at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:67)
at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:67)
at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:67)
at com.sapportals.wdf.WdfCompositeController.doInitialization(WdfCompositeController.java:281)
at com.sapportals.wdf.WdfCompositeController.buildComposition(WdfCompositeController.java:659)
at com.sapportals.htmlb.AbstractCompositeComponent.preRender(AbstractCompositeComponent.java:33)
at com.sapportals.htmlb.Container.preRender(Container.java:120)
at com.sapportals.htmlb.Container.preRender(Container.java:120)
at com.sapportals.htmlb.Container.preRender(Container.java:120)
at com.sapportals.portal.htmlb.PrtContext.render(PrtContext.java:414)
at com.sapportals.htmlb.page.DynPage.doOutput(DynPage.java:237)
at com.sapportals.wcm.portal.component.base.KMControllerDynPage.doOutput(KMControllerDynPage.java:130)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:129)
at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
at com.sapportals.wcm.portal.component.base.ControllerComponent.doContent(ControllerComponent.java:73)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:160)
<
<< #1.5#000BCD4305DF00830000001400000CA000043589F1B112B3#1184766488634#com.sapportals.wcm.util.logging.CatchBlockHandler#sap.com/irj#com.sapportals.wcm.util.logging.CatchBlockHandler.ResourceType#C0580JAP#753##DCPORTSBX01_NWD_24366050#C0580JAP#9d98a370353411dcb970000bcd4305df#SAPEngine_Application_Thread[impl 1 : >>
> #1.5#000BCD4305DF00830000001400000CA000043589F1B112B3#1184766488634#com.sapportals.wcm.util.logging.CatchBlockHandler#sap.com/irj#com.sapportals.wcm.util.logging.CatchBlockHandler.ResourceType#C0580JAP#753##DCPORTSBX01_NWD_24366050#C0580JAP#9d98a370353411dcb970000bcd4305df#SAPEngine_Application_Thread[impl
#1.5#000BCD4305DF00830000001400000CA000043589F1B112B3#1184766488634#com.sapportals.wcm.util.logging.CatchBlockHandler#sap.com/irj#com.sapportals.wcm.util.logging.CatchBlockHandler.ResourceType#C0580JAP#753##DCPORTSBX01_NWD_24366050#C0580JAP#9d98a370353411dcb970000bcd4305df#SAPEngine_Application_Thread[impl:3]_0##0#0#Error##Plain###[ECB] Can't find resource for bundle java.util.PropertyResourceBundle, key rt_portaliView: java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key rt_portaliView
at java.util.ResourceBundle.getObject(ResourceBundle.java:325)
at java.util.ResourceBundle.getObject(ResourceBundle.java:322)
at java.util.ResourceBundle.getString(ResourceBundle.java:285)
at com.sapportals.wcm.util.resource.ResourceBundles.getString(ResourceBundles.java:88)
at com.sapportals.wcm.service.resourceTypeRegistry.ResourceType.getDescription(ResourceType.java:167)
at com.sapportals.wcm.control.util.metadataextension.ItemTypeValueProvider.getValueLabel(ItemTypeValueProvider.java:91)
at com.sapportals.wcm.service.propertyconfig.config.MetaValue.getValueLabel(MetaValue.java:48)
at com.sapportals.wcm.service.xmlforms.ResourceProperties.appendAllowedValues(ResourceProperties.java:692)
at com.sapportals.wcm.service.xmlforms.ResourceProperties.mergeProperty(ResourceProperties.java:656)
at com.sapportals.wcm.service.xmlforms.ResourceProperties.mergePropertiesIntoDom(ResourceProperties.java:585)
at com.sapportals.wcm.service.xmlforms.transformation.HtmlGenerator.getHtmlStream(HtmlGenerator.java:120)
at com.sapportals.wcm.service.xmlforms.transformation.Transformation.render(Transformation.java:380)
at com.sapportals.wcm.service.xmlforms.transformation.Transformation.render(Transformation.java:155)
at com.sapportals.wcm.rendering.resource.cm.XMLResourceRenderer.renderXMLResource(XMLResourceRenderer.java:319)
at com.sapportals.wcm.rendering.resource.cm.XMLResourceRenderer.render(XMLResourceRenderer.java:146)
at com.sapportals.wcm.rendering.collection.cm.CollectionGridRenderer.renderResource(CollectionGridRenderer.java:453)
at com.sapportals.wcm.rendering.collection.cm.CollectionGridRenderer.renderEntry(CollectionGridRenderer.java:413)
at com.sapportals.wcm.rendering.collection.cm.CollectionGridRenderer.renderUI(CollectionGridRenderer.java:144)
at com.sapportals.wcm.rendering.collection.LightCollectionRenderer.renderAll(LightCollectionRenderer.java:597)
at com.sapportals.wcm.rendering.control.cm.NeutralControl.render(NeutralControl.java:171)
at com.sapportals.wcm.rendering.layout.cm.SimpleLayoutController.render(SimpleLayoutController.java:39)
at com.sapportals.wcm.rendering.control.cm.WdfProxy.render(WdfProxy.java:1771)
at com.sapportals.wdf.layout.HorizontalLayout.renderControls(HorizontalLayout.java:42)
at com.sapportals.wdf.stack.Pane.render(Pane.java:155)
at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:67)
at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:67)
at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:67)
at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:67)
at com.sapportals.wdf.WdfCompositeController.doInitialization(WdfCompositeController.java:281)
at com.sapportals.wdf.WdfCompositeController.buildComposition(WdfCompositeController.java:659)
at com.sapportals.htmlb.AbstractCompositeComponent.preRender(AbstractCompositeComponent.java:33)
at com.sapportals.htmlb.Container.preRender(Container.java:120)
at com.sapportals.htmlb.Container.preRender(Container.java:120)
at com.sapportals.htmlb.Container.preRender(Container.java:120)
at com.sapportals.portal.htmlb.PrtContext.render(PrtContext.java:414)
at com.sapportals.htmlb.page.DynPage.doOutput(DynPage.java:237)
at com.sapportals.wcm.portal.component.base.KMControllerDynPage.doOutput(KMControllerDynPage.java:130)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:129)
at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
at com.sapportals.wcm.portal.component.base.ControllerComponent.doContent(ControllerComponent.java:73)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:160)
<

Fixed.

Extraction failure and then picked up due to IDOC setting on source system

Similar Messages

Maybe you are looking for