Extraction for Sales with ITC and ATI

Hi
Can anybody please let me understand what are ITC and ATI processes in Sales ? and how do we do extractions form them.

Hi
Can anybody please let me understand what are ITC and ATI processes in Sales ? and how do we do extractions form them.

Similar Messages

  • TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1.  Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

    Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1).  I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly.  Do you want iTunes to try to repair this for you?  I normally respond with OK and it immediately tells me "could not be repaired.  Please reinstall iTunes..."  I have done this a number of times to no avail.

    I also notice Quicktime is not getting installed at all.
    That one is normal nowadays (ever since the iTunes versions 10.5.x).
    The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Function module which uses both BAPI's for sales order create and change

    Please name the function module which uses both BAPI's for sales order create and change.
    BAPI_SALESORDER_CREATEFORMDAT2
    BAPI_SALESORDERCHANGE

    Yup.
    you must write a piece of code for this.
    with if else condition.first check if SO is exsist than use second FM to change it else create new SO from first FM.
    logic somethig like this.
    Amit.

  • Error message: "the software required for communicating with Ipods and mobile phones was not installed correctly....

    2 error messages when opening itunes: "The software required for communicating with Ipods and mobile phones was not installed correctly.  Do you want Itunes to repair this for you?"  When clicking yes another message indicates not able to remove services.  Another message is: "Service (ipod service) could not be installed.  Verify that you have sufficient privileges to install system sources."  I've uninstalled all Apple services (itunes, quicktime, apple software update, apple mobiles devices support, bonjour and apple application support and reinstalled itunes/quicktime - no change in error messages.  I cannot burn CDs using Itunes.  This all seemed to happen when I updated itunes to version 10.  I have a Windows 7 64-bit operating system on a Dell Inspiron Zino HD; the Itunes software is also 64 bit.

    See the second box of  Troubleshooting issues with iTunes for Windows updates.
    tt2

  • HT201365 hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me

    hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on [email protected]

    First, we're not Apple here (Apple does not participate in this forum).  We're only users like you.
    The previous owner has not given you the correct ID and password for you to use.
    If the iphone has iOS version 7, then read through the following...
    http://support.apple.com/kb/HT5818

  • Hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade

    hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on
    iPhone 4S

    oenkz33 wrote:
    this does not help at all for the second owner, after making the first owner id with careless, sorry for my english ...
    Careless? Possible, but unlikely. Most likely the phone was stolen from the first owner. It would be a VERY careless iPhone owner who did not erase their personal information from a phone before selling it, and to do that it is necessary to disable Activation Lock. In most places in the world knowingly using stolen property is a crime, so the fact that the phone doesn't work may be the least of one's risks.

  • When I click on itunes, it tells me that thesoftware required for communicating with ipods and mobil phones was not installed properly. I have not changed anything on my computer so I'm not sure what I should do? Help

    Help, When I click on itunes on my computer it tells me that the software required for communicating with ipods and mobil phone was not installed properly. I havent' changed anything. Does anyone know what I should do? Thanks

    See the second box of Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Is there a Business Object for Sales Order Create and Change VA01 and VA02

    Hi experts -
    I am looking for a business object for Sales order create and change VA01 and VA02 respectively?
    Thanks,
    Mark

    Hi Mark,
    I think this question is best answered in [SAP Solutions|/community [original link is broken]; Forums.
    - Subhodeep
    Edited by: Subhodeep on Aug 29, 2009 11:14 AM

  • I'm sorry, I have to convert the mov file. for use with fce and / or imovie11, better ProRes422 or intermediate codec?

    I'm sorry, I have to convert the mov file. for use with fce and / or imovie11, better ProRes422 or intermediate codec?

    FCE only used AIC for HD.
    Al

  • The software required for communicating with ipod and mobile phones was not installed correctly

    ok i've seen this in several threads and haven't found one with an anwser. the software required for communicating with ipod and mobile phones was not installed correctly. of course when you tell it to repair it does not. this has happened several times now and only cure i have found is uninstalling itunes and reinstalling. works for maybe a few weeks then does the same thing and i start all over again with uninstall and reinstall. i tunes version 10.4.1.10  64 bit running on windows 7 64 bit and trying to sync with Iphone 3gs - so anyone have a fix for this or am i stuck reinstalling itunes every few weeks???

    "The feature you are trying to use is on a network resource that is unavailable.  Click OK to try again, or enter an alternative path to a folder containing the installation package "iTunes64msi"
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Why Apple doesn't provide .jpg-files for photos with date and our like Blackberry and Samsung?

    why Apple doesn't provide .jpg-files for photos with date and our like Blackberry and Samsung?
    I have to save photos (for medical use) on my pc and this suffix would be useful to identify them quicker.
    Thanks

    http://www.learn.usa.canon.com/resources/blogs/2014/20140708_winston_filenames_b log.shtml

  • I have a macbook pro with mountain lion and now so I can not synchronize my outlook calendar office 2011 for mac with ical and, therefore, with icloude. Can anyone help?

    I have a macbook pro with mountain lion and now so I can not synchronize my outlook calendar office 2011 for mac with ical and, therefore, with icloude. Can anyone help?

    http://support.apple.com/kb/HT5922
    If you want to mirror your desktop, see:
    http://support.apple.com/kb/HT5404
    Regards.

  • NEED BAPI FOR  SALES CONTRACT CREATION AND EXTRACTION FOR Trans- PA41& PA43

    Hi All,
    I need the BAPI for T-code PA41 and PA43 for sales contract.
    i would like to extract all the contract details for Contract data contains Table VEDA. And need to create contract.
    Any body please help me out...
    Please give me code if any one have how to do mapping ..
    Thank you,
    Vishnu.

    Hi Vichu,
    Please search on SCN.
    Regards
    Abhii

  • How many apps can you have for sale with a CC Complete membership? (Not Pro or Enterprise)

    I have the CC complete membership (£46 p/m) I was under the impression I could only have 1 app for sale on the Apple store with this. But I've re-read the guidelines and it says I can have unlimited apps. I've been working on an ipad app, which has ended up exceeding the 100mb limit (I think this limit is new, too) But my app could be divided up logically into 2 or 3 apps for individual publication, so long as each has the $99 fee paid. Do my conclusions sound right, or have I missed something?

    >for sale on the Apple store
    This is Adobe... I think you need to ask Apple about their store policies

  • Subcontracting for Sales Order Stock and collective Transfer Posting

    Dear Expert,
    We have a scenario in subcontracting wherein the sales order the customer also wants to see the components and as such along with the Header item of subcontracting ,we also mention the components as another line item in the sane Sales Order.
    Now from the sale sorder two Po's are created onr for the subcontractor and one for the compnens to be procured.
    Since the components are procured on sales order stock there is noway we can issue it to the Vendor stock through Movt .Type 541.
    As per SAP AG WE CAN:
    "ubcontracting is also possible in conjunction with sales order stocks and project stocks. The subcontracting orders are account-assigned to a sales order or a WBS element. Thus, the components are not transferred (using a transfer posting) to the u201Cstock of material provided to vendoru201D but are directly withdrawn from the sales order stock or the project stock at the time of the goods receipt. The material manufactured is also posted to the sales order stock or to the project stock. The cost of subcontracting is then debited to the sales order or WBS element.Since the components are not transferred to the u201Cstock of material provided to vendoru201D, we recommend that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor.This information is particularly important when you carry out a physical inventory of the sales order stocks and project stocks."
    But my query is that how many such storage locations will be created for the subcontracting vendors.
    Secondly for the stock transfer from sales to storage location , we have lots of sales order, is dera way through which we can do bulk transfer rathar than clicking at new item everytime and then doing the transfer posting.
    your expert advice shallbe helpful in resolving a longtime pending issue , waiting for the response.
    Regards
    Jabeen

    This is a known issue, the system doesnt allow stock to have two special stock statuses at the same time.
    Your concern of having to make multiple storage locations is valid (since this is a configuration).
    I suggest you do the following
    - Configure a warehouse and a single storage type (say 001). Allow mixing of materials in a single bin
    - Assign this warehouse to a new storage location.
    - Create a bin for every sales order number in the warehouse.
    - When goods are moved to subcontractor, perform a transfer posting to the storage location, and perform a putaway to the respective bin. The putaway strategy can be tweaked using a user exit to go to the relevant bin. This way you do not have to enter the WM transaction for putaway.
    - To consume the stocks, you can use 231E movement (MB1A). On the WM side, the picking strategy can be enhanced so that the picking TO is generated with the correct source bin. Make sure the GL account and CO objects are as per FICO requirements.
    This way you can track the stocks binwise (bin level reports are available in WM), perform physical inventory and also consume the stocks from the relevant bin automatically.
    We had faced the same situation, and we ended up not having sales order stock at all.
    Hope this helps.
    Regards,
    Aroop

Maybe you are looking for