Extraction from 2 R/3 systems

Hi,
I hav to extract frm 2 R/3 systems [ Appln Comp : 11, 12, 13 ]. One I hav done ie. frm ECC6 another is 4.7, frm the same datasources into the same cube. Pl guide me how to go abt it.
Best Regards,
Kishor M.

Hi Kishor,
     There are couple of points to be a concern here,
1. What kind of analysis required? either they want to see the report by source system or they want to see the consolidated one?
2. If we want reporting by source system, then we have to introduce source system in the transfer rule.
  Because transfer rule is the place which will decide abt the source system.
revert for clarifications.
regards,
Meiy

Similar Messages

  • Re: Data Extraction from Multik R/3 systems into one Infosouce

    Hi Experts,
    In my current project there is a requirement to bring data from two different R/3 clients(systems) into one BW sytem.
    The inforsouce is the same. For example The FI GL data needs to upload into BW through the Infosource 0FI_GL_4 from two different R/3 clients ; 100 and 150. Is it possible?
    Curreny set up is to bring data only from R/3 system 100. Now the requirement change and have to bring data from R/3 system 150. This is the situation in production client.
    Please advise and share your view.
    Thanks in advance

    Luis:
    Thanks for the response.
    In both R/3 clients Data Source is 0FI_GL_4. The infosource is 0FI_GL_4. I am loading data into FIGL ODS. Are  0GN_R3_SSY and 0LOG_SYS_BE two infoobjects to be included into the FIGL ODS?
    Another question - The data source for one client is in the revised mode in BW production client. Can I install the data source in the BW production client by generating transfer rule/transfer structure? Or do I need to transport it from the R/3 client and replicate it in BW?
    Please respond.
    Thanks

  • Need seosubcodf table extract from CRM 4.0 system

    Hi,
    Does anyone has CRM 4.0 system access. I need table SEOSUBCODF extracts.
    Do reply me soon.
    Thanks,
    Saurabh.
    Edited by: Saurabh Luthra on Apr 6, 2009 1:25 PM

    Paritosh,
    Our dev landscape(on windows environment) looks like:
    CRM ABAP - WAS 620 - ABAP box
    CRM J2EE - WAS 640 ABAP+J2EE - Java Box
    I don't know if you can install the 640 J2EE WAS on the same box as a 620 ABAP Box.  However you should be able to use the 640 J2EE environment with CRM(we are using it productive).
    We are running non-IDES 4.0SP8.
    It would probably be easier if you have two boxes to install the ABAP on one box, and the J2EE on another box, for better performance.  I do remember also there are some restrictions on TREX/IPC/etc being on the same box if you are using all the functionality provided.  We currently don't use CRM for "pricing-relevant" transactions.
    Good luck,
    Stephen

  • Error message RD 156 during extraction from the CO-PA system

    Hi all
    we are loading COPA from SAP R/3 ECC 6.0 SPS11 to our BW Netweaver 2004 SPS20 System every 2 hours
    Once the COPA loads tries to pull data out of the object EKCCESVBE in table CESVB this is sometimes locked by a regular R/3 user
    This issue is described in SAP Note 431350
    We have even set the parameter to 30 retries (more than the OSS Note suggested)
    *{   DELETE         SRDK919819                                        1
    *\    DO 2 TIMES.
    *}   DELETE
    *{   INSERT         SRDK919819                                        2
    DO 30 TIMES.
    *}   INSERT
          L_TIME = SY-UZEIT + 20.
          WHILE L_TIME > SY-UZEIT.
            GET TIME.
          ENDWHILE.
          CLEAR L_SUBRC.
    But still we are facing the issue that the data source is locked.
    I am confident that we are not the only customers that would run into this issue
    How do you handle COPA data loads?
    Thanks for sharing your input
    best regards
    Nesimi

    Dear,
    Please go to IMG path SPRO>Controlling>Profitability Analysis> Master Data>Valuatioin>Setup using Material Cost Estimate>Define Access to Standard Cost Estimate, there in Costing Variant you will find as YPC1, which in Customized one, please maintain PPC1 there...or remove it will work.
    Br,Vivek

  • Slow extraction from Source System

    Experts,
    I'm on the basis team and we're trying to figure out what we can do to increase the performance of a BI extraction from an ECC source system.
    Our BI team is doing a Full extraction of Data Source 0UC_SALES_STATS_02 which has about 24 million records.  This has been running for about 2.5 days and has only extracted 12.5 million records according to RSMO
    I'm no expert on BI performance, but I'm trying to get there.  One thing we noticed is that we have over 1000 Data Packages and each has about 11K records per package.
    RSBIW "control params for data transfer" in the BI system is set as this:
    LOGSYS     --  Max KB.  --  MAX Lines  --  Freq  --  MAx PROC  -- Target Sys  -- Max DPs
    OURBWSYS --  20000 --          0             --  10    --        3            --     blank        --   blank
    OURECCSYS --  20000 --          0             --  10    --        3            --     blank        --   blank
    Also we only see one background process running on the ECC system which is the Zprogram that was written to perform the extract.
    We also checked IMG - sap netweaver - BI - links to other source systems - maintain contrl params for data xfer
    Freq/IDOC = 10
    pkg size = 50,000
    partition size = 1,000,000
    We are on NWEHP1 for our BI system
    We are on ECC6.0 EHP3sp5 for our ECC system
    We use Oracle 10.2.0.4.0 with it fully tuned
    We also think we have all the correct tuning parameters in our ECC/BI systems.  There are a few tweaks we could make but I don't see any glaring problems.  All our memory parameters seem to be in line with what is recommended.
    We do not see any kind of Memory/CPU bottlenecks.
    Do you think the many data packages and small records per package is a problem? 
    Any tips to increase performance would be helpful, I'm still looking.
    I saw this wiki thread and it mentions to look at tcode RSA3 in ECC system to monitor long extracts.   But I have looked at this and I have not figured out what all needs to go into the fields to correctly run this.
    Any help you can provide would be great.
    Thanks,
    NICK

    HI Nick,
    This problem is due to the huge volumes of data and the job is ruinng from long time onwards, normally we will kill the job if it exceeds more than 8 hours time while extracting the data.
    Please suggest your BI Team to pull data in small volumes by providing selections in info package. This will drastically redcues the time for extraction of huge data and will also not consume all the resources in system.
    Please pass below links to your BI team as this is completely releated to design issue.
    http://help.sap.com/saphelp_nw70/helpdata/en/39/b520d2ba024cfcb542ef455c76b250/frameset.htm
    Type of DSO should be write optimized to increase load performance.
    http://help.sap.com/saphelp_nw70/helpdata/en/34/1c74415cb1137de10000000a155106/frameset.htm
    2. And at your end look for the table spaces of the PSA tables, may be it is execeeding its capacity and make it as automatic. instead of manullay assigning the space at the regular intervals.
    Hope this helps.
    Regards,
    Reddy
    Edited by: Reddybl on Apr 2, 2010 12:23 AM

  • Data extraction from Non-Unicode ECC6 to Unicode SAP BI system

    Hi,
    We have an existing non-unicode ECC6 system. Currently we are installing SAP BI unicode system. Can anyone tell me are there any issues in data extraction for SAP BI from a non-unicode ECC6 system to an Unicode SAP BI system ?
    Please also note that our data consists of Asian (korean, Japanese & Chinese) fonts.
    Regards,
    Anirban

    Hi Des Gallagher,
    Thank you for your reply.
    I have gone through the notes suggested by you, but they suggest issues related to BW 3.x versions. We are currently on SAP_BW 700 - SP16. Also, among other notes i found note 510882 which might be helpful for custom developments.
    But i am still wondering whether we are going to face major issues related to data extraction from non-unicode ECC6 system to unicode SAP_BW 700 system.
    Incase you have any further details, please let me know.
    Thanks in advance.
    Regards,
    Anirban Kundu

  • Unable to extract data from an AS/400 system.

    Hello experts.
    We are trying to extract data from an AS/400 system but not having any success until now.
    I´ll write down you the stepts that we have followed until now:
    1.- Create a DB Connect between both systems
    2.- Create a Source System from AS400 in the workbench under DB Connect Directory
    3.- Generate datasources from tebles specified in the schema of the connection
    break point -
    At this point, we had a problem with some tables with at least one fieldname containing character "Ñ".
    After asking some possible solutions to SAP, the told us this is not supported, as the system can´t have any object with character "Ñ", so the transfer structure was unable to activate with this fields in the datasource.
    --- end of brek point --
    4.- After those issues, we´ve decided to implement, in another schema, views from those tables which had the fieldnames with that character "Ñ", changing them to an "N".
    5.- We´ve created another source system with that schema, and user than can see that schema.
    6.- To be able to see those views, in transaction RSDBC, we had to deactivate the two checkboxes in the first window ( Choose tables and Choose views) .
    7.- Right afeter, we could generate correctly the datasources from this logical tables.
    8.- We have designed  the hole dataflow for this datasources and everithing went rigth.
    9.- But wen we tried to execute the infopackage to extract data from those logic tables, we cannot get any registers. Acctualy the charge remains yellow after the job have finished.
    Please, I would appreciate any help you could give us on this problem.
    Thank you very much
    Regards
    Joaquin

    I´d like ti add something to this thread, and maybe clarify a littel bit the question.
    The only way that the BW system recognizes those logical tables, through transaction RSDBC is checking out the two boxes on this transaction, "Select Tables" and "Select Views".
    I don´t know haw these logical tables have been created, bus does this mean that the are not neither tables or views as BW understand them.
    Please, if someone knows anythin about this, answer to this thread.
    Thank you very much.
    Joaquin Sobrido

  • How to extract Inventory data from SAP R/3  system

    Hi friends How to extract Inventory data from SAP R/3  system? What are report we may expect from the Inventory?

    Hi,
    Inventory management
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
    How to Handle Inventory Management Scenarios in BW (NW2004)
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Loading of Cube
    •• ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
    http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
    Non-Cumulative Values / Stock Handling
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
    Non-Cumulatives
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
    Here you will find all the Inventory Management BI Contents:
    http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
    2LIS_03_BX- Initial Stock/Material stock
    2LIS_03_BF - Material movements
    2LIS_03_UM - Revaluations/Find the price of the stock
    The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
    detailed level (material, plant, storage location and so on). At this moment, the opening
    stock is the operative stock in the source system. "At this moment" is the point in time at
    which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
    documents are to be posted during this run and so the stock does not change during this
    run, as we will see below). It is not possible to choose a key date freely.
    The second DataSource (2LIS_03_BF) is used to extract the material movements into
    the BW system. This DataSource provides the data as material documents (MCMSEG
    structure).
    The third of the above DataSources (2LIS_03_UM) contains data from valuated
    revaluations in Financial Accounting (document BSEG). This data is required to update
    valuated stock changes for the calculated stock balance in the BW. This information is
    not required in many situations as it is often only the quantities that are of importance.
    This DataSource only describes financial accounting processes, not logistical ones. In
    other words, only the stock value is changed here, no changes are made to the
    quantities. Everything that is subsequently mentioned here about the upload sequence
    and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
    This means a detailed description is not required for the revaluation DataSource.
    http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
    http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
    These are the standard data sources used for Inventory extraction.
    Hope this helps.
    Thanks,
    JituK

  • Tools available to extract  documents from SAP document management system

    Hi ,
    Can anybody provide some valid information on
    Tools available to extract the documents and their associated meta data from SAP Document Management system and DIR (Document Information Record) to non SAP document management sysyem ?
    Thanks..

    Hi,
    On ALE / EDI interface, you can use Message DOCMAS for triggering the outbound IDocs, you can use Program: RBDSEDOC
    For ALE / EDI Configuration, you can refer the book by Arvand Nagpal which is a step by step guide.
    Hope this helps.
    Best Regards, Murugesh AS

  • VLD-2771: System privileges may not allow extraction from source T.

    How to solve this problem.
    while deploying I am getting this message,besides where in oracle site I can find documentation for the errors in warehouse builder.
    VLD-2771: System privileges may not allow extraction from source T.
    I had given dba privileges to both source and target schemas, but still getting the error.
    Regards,
    Prabhathg

    When I tried to deploy my mapping, I am getting warning message <<VLD-2771: System privileges may not allow extraction from source D_UII_MV_NCA_INFRACONN.>>. As solution written in "http://forums.oracle.com/forums/thread.jsp?forum=57&thread=252565&message=742299", I gave SELECT privilege on the source table to the target user. But still, I am getting this error message.
    Can you please guide me in right direction?

  • VLD-2771 System privileges may not allow extraction from source ....??

    When I try to deploy the mappings in OWB Deployment Manager, I got a Warning "VLD-2771 System privileges may not allow extraction from source ORDER_ITEMS". WHY? ^^""
    ========================================
    I define a Runtime Repository Connections "ORACLE_HW_RUNTIME"
    Host Name: localhost
    Port Number: 1521
    Service Name: GBGLM
    Connect As User: owb904rr
    Runtime Repository Owner: owb904rr
    and the "ORACLE_HW_RUNTIME" is in "ORACLE_WAREHOUSE" module, the "ORACLE_WAREHOUSE" use the link "OE" and the owner is "OWBUSER"
    p.s. the table "ORDER_ITEMS" is in "OE" schema. I had grant DBA to "owb904rr" and "OWBUSER".
    then use "ORACLE_HW_RUNTIME" to deploy the Mappings "WH_ORDERS_MAP". What I need to do for deploy?
    ^_^||

    Anyone with similar experience using SQL Server as the source?
    First I get: VLD-2771: System privileges may not allow extraction from source Product.
    Then if i ignore the warning and deploy, i get
    ORA-06550: line 15, column 18:
    PL/SQL: ORA-00942: table or view does not exist
    I have a public database link to the sql server database.
    When I create the mapping, I am able to see the tables and create the map. So why this problem when deploying. Which user is to be granted access to the source tables. I belive we cannot grant access to remote database tables using a database link. So what is the work around?
    Any help is highly appreciated.
    Please email me at [email protected]

  • Extraction from CRM system to BI 7.0

    I want to extract BP relationships based on sales area.Kindly let me know if there are any standard datasources and what is the approach to extract from CRM system.

    I believe DS for "CRM Business Partner: Partner Function Assignment (Sales Area-Dependent)" can help you:
    0BPFUNCTION
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/f6/033a3b7fe88b57e10000000a11402f/content.htm

  • Extracting data from an R/3 system to Xcelsius

    Hi,
    Could you help me - what is involved in extracting data from an R/3 system (i.e. not BI) and getting it into XCelsius?
    My idea at the moment is to write an ABAP to extract the data to a Z table, and wrap it up in a web service, and access this from XC? Woudl this be on the right track or is there an easier way?
    Thanks.

    Hi, you can do as you describe but I would prefer to build a Crystal Report-report against the R/3 systems and then use LiveOffice to extract the data to Excel and then build the Xcelsius on top of the Excel file. The advantage is that you can use Business Objects Enterprise and get built-in security to the dashboards. You can also schedule the Crystal Report and refresh against instances to speed up performance.
    Andreas

  • What is Extracted from Source Systems

    Hi All,
    is there a simple way of seeing if there is any data extraction taking place from a specific source system connected to BW?
    Instead of looking at everything seperatly/manually I am hoping there is way to see if there is any extraction taking place from a certain source system.
    many thanks.
    Andrew

    Thanks Olivier,
    That was what I needed to know.
    Points assigned.
    Regards,
    Andrew

  • Problem with upload data from CRM to BI system

    When I try to perform full upload data from CRM to BI system with data source 0BPARTNER_ATTR (active version: Excutable). I waited for a long time but there are not any records were transfered (total records need to upload are 130) . I checked the log and can't find any errors.
    Pls help me solve this problem.
    Thanks and regard

    Hi,
    on the next day, the process finished with status not success.
    The detail errors is:
    Extraction(messages): Missing messages
              Missing message: Request received
              Missing message: Number of sent records
              Missing message: Selection completed
    Transfer (IDocs and TRFC): Errors occurred
              Data package 1: arrived in BW; Processing: Selected number does not agree with transferred n
              Request IDoc: Application document posted
              Info IDoc 2: sent, not arrived; Data passed to port OK
              Info IDoc 1: sent, not arrived; Data passed to port OK
              Info IDoc 3: sent, not arrived; Data passed to port OK
              Info IDoc 4: sent, not arrived; Data passed to port OK
    However, the data has been uploaded to infoobject. Pls explain to me about this error and why the data can be uploaded with this error.
    Regard

Maybe you are looking for