Extraction from APO to BI

Hi All,
I ned to add some fields to APO cube. I need to change Data source to.
My doubt is, How is the extraction procedure in APO mean is there any
extractor like R/3. Please let me know.
Thanks,
KN

Hi,
For Datasources:
Re: APO/BW: How to get back from APO to BW/ How the send data from BW to APO
http://help.sap.com/saphelp_scm50/helpdata/en/c9/199170f13711d4b2f20050da385632/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/e0/9088392b385f6be10000000a11402f/frameset.ht
APO extraction
The presentation.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/integrate%20bw-bps%20and%20apo-dp.pdf
the links:
https://websmp201.sap-ag.de/scm
http://help.sap.com/saphelp_scm41/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
APO Documents Required
apo
BW with APO
http://help.sap.com/saphelp_nw04/helpdata/en/db/4774404a6fcf62e10000000a155106/frameset.htm
APO and BW
APO basics
Hope this helps,
Regards
CSM Reddy

Similar Messages

Data extraction from APO

Hi All,
We have a requirement to get the data extracted from APO DP,SNP and load it to S&OP. I tried to look into the following and was not successful.
1) 9ABPC _Extract
How to extract the data with extractor lie listed above. Any information on this is appreciated.
Kind Regards,
Sanjeev

Hi USERPV ,
Change the aggregation level(by removing some characteristics) so that number of records will change.
Thanks,
viajy.

Master data extraction from APO BW to BW BW

Hi Gurus,
I am having a task to extract data from Demand Planning Infocube in APO BW to the Custom Infocube in BW-BW. My question is how do we get the master data (texts and Attributes) for APO-Material and APO-Location (Plant in BW) from APO BW to BW-BW. Any insight into this please.....

check this
master data for demand planning

Error occured during extraction from APO to BI 7.0

Hi Experts,
I am in the process of extracting data from SCM(APO-Demand Planning) to BI .I have selected the relevant planning area 9ADP01 and given Generate Export DS in APO system and replicated the same in BI.But before scheduling the InfoPackage,when i checked for the DS 9A0APO_DP_ORDERANALYTICS_1,it displays "Error occured during extraction".I do have a doubt whether I should activate the DS in RSA5 before replication (but am not able to find the DS under DP in RSA5)
I have checked the forums but solutions mentioned did not resolve my issue.
Thanks,
Meera

Hi,
The issue is resolved...
Regards,
Meera

Extracting Data from APO PP/DS to BW

Hi Gurus,
I'm trying to extract data from APO PP/DS (SCM 5.1) to BW (BI 7.0). I'm new to SCM and am not sure how the extraction from SCM to BI happens other than that we need to read data from LiveCache.
The extractor we are interested are
0APO_PPDS_RESCAPREQ_01
0APO_PPDS_PROD_CUST_01
0APO_PPDS_OPERATION_01
0APO_PPDS_ORDER_01
Pls kindly help me out with the procedure.
Thanks in advance.

Hi
Have a look at the below urls..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f229690-0201-0010-84ba-9ee5a8958a05
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4fe5d590-0201-0010-6c8d-ada86492cf11
Re: APO to BW Design Question
Re: APO BW Integration
Hope it helps
Thanks
Teja

Error during extraction data from APO system

HI Gurus,
We are extracting data from APO system at regular intervals. As poart of business requirement, we enhanced the data existing data source in APO dev system and replicated the same in BW dev system and activated the Tx structure and Tx rules.
When we checked it is working fine in dev environment.
Now we moved the same in Quality system, and we tried to extract data, it throws error " error in data selection in source system".
We tried to check in RSA3 in APO and found that the extract program still refers to the old extract structre and gives dump " Extract structure unknown".
Could anybody throw some light on this issue.
Tnx in advance.
Guru

Hi,
Have u collected all the objects in R3,like the Table/View , DS,Extract Structure.
And
Has replication been done in BI side for the same.
Rgds
SVU
Edited by: svu123 on Sep 24, 2009 7:50 AM

Extract data from APO to BW

Hi Team,
APO is very new for me.
My requirement is:
I need to extract Sales Data from APO system to BW system.
It would be great, if you can please provide me step by step process for this.
Thanks & Regards,
Vipin

Hi Vipin,
Its the same steps that you need to follow as when you do a R/3 extraction in BI/BW. Proabaly the datasource names might being with '8' ie if there is an object by name '0MATERIAL' in APO which is going to form a source for BW then in RSA5 you need to look for the datasource name '80MATERIAL'. Then follow the steps below:
1. in the APO system, Goto RSA5, Choose the Datasources related to sales and activate it.
2. Goto RSA3 and check the extractor, when you have to specify the client name give the name of the BI client and extract.
3. In the BI/BW system, goto Source system and choose the name of the APO client and then do a check to see if there is a valid RFC connectivity.
4. Goto Datasources and choose the source system to be the APO client and replicate the datasources.
5. The datasource will be visible now, create an infopackage and do the normal process from there to do the data load to any target.
Make sure the target is active and then do the DTP to get the data from APO to BW system.
Thanks
GURU

APO DP Extraction from BI.

Hi,
Please provide the APO DP Extraction from BI.............
APO-DP what are all data's coming in DP....
Thanks,
Bye,
Vijay

Hi,
Can you please be more clear what you are trying to ask.
Reg
Pra

How to extract data from APO to BW(not APO's BW)

Hi, expert.
Now I want to extract data from APO to BW (not APO's), what's the data flow.
1. APO datasource----->BW (not APO's) datasource----->BW (not APO's) infocoube
2.APO datasource----
>BW (APO's) -
>BW (not APO's)
I want to create query on the BW not APO's.
Which one is right? or there is another way?
Thanks in advance.

Hi Bruce,
If I understand your question correctly your scenario 1 comes closest to a solution:
1) Create/activate Datasource in APO system and test it using tcode RSA3 (assuming it is SAP APO)
2) Replicate the Datasource in BW + create infopackage which will load the data into PSA
3) Create a DSO (if you like a layered approach) and a Cube on top + a Multiprovider above
4) Connect BW Datasource to DSO and DSO to cube (Transformations + DTPs to load)
5) Create a query on the Multiprovider
Hope this helps.
Grtx
Marco

Loading Demand plan data from APO to BW

Hi Gurus,
We have requirement as below.
we have to extract two key figures from APO to BW system
The 2key figures of APO will get data as below:
First key figure has to hold Yearly snap shot and 2nd Key figure has to hold QTY snapshot.
we have constrained production plan & sales plan keyfigures in apo demand planning and the requirement is to extract these 2 keyfigure quaintest into BI.
Data Example as below:
KF1: Yearly snapshot
KF2: Quarterly snapshots
Yearly data means from   Jan to Dec and
Quaterly data is as below
Qtr1 - Dec       JAN to Dec
Qtr2 (in FEB) - Mar to Dec
Qtr3 (in May) - Jun to Dec
Qtr4 (in Aug) - Sep to Dec
so please let me know to how to handle or extract these data into BW.
Thanks,
Shailaja

Hi Venkat,
Yes, both the key figures are ther in the same planning area.
But my question here is how to get that data into BW? meaning...
If APO/DP does the planning in the month of Sep 2010 for Jan to dec 2011 and the
values are like
Sep-10   jan      Feb mar   april may june july aug sep oct   nov dec
               15     14     13      11    10     11     12     16    14         15   22     20
Dec-10   12     14   16        18    29     20    18     15   14    12   17        20
Mar-11          10 12   13       14     15   16    17 18         20
Jul-11                                  20       40     30      40       50
meaning, If the planning is done in the month of Sep 2010 for the yr 2011 as explained above that values should be extracted into BW and the next planning will be done in the month of Dec 2010 again for entire yr of 2011 i.e. Jan 2011 to Dec2011.
But the values should be captured as they are.. that means if i use DSO the values from request1 to request2 will be over written n if i use the cube they will be added up..
Request1 will hold data of Sep2010: planning data
Request2 wil hold Dec 2010 data ....n req3 will hold data of Mar 11...
but users want to see the values or planning figures as they are.
Hope i made my requimrent more detailled.
Please let me know the solution to get the data as it is in BW.
Thanks,
Shailaja

How to configure for the give senario where we from APO demand planning, we provide baseline forecast into TPM

Hello Guru's,
Request for information on smart documentation on the integration between Trade Promotion Management and SCM-Demand Planning from an architecture perspective how to configure for the give senario where we from APO demand planning, we provide baseline forecast into TPM and from TPM promotions values can be considered in to APO demand planning: can anybody give me some insight on it.
Thanks in advance.
Kumar

Hi Praveen
There are several ways you can connect a DP system to a TPM. How are your interfaces and systems setup?
Option1:
Extract the baseline from APO to a BW cube, extract the data out of BW, may be using infospokes/open hub and pass it on to TPM.
2. Have a custom program written in APO-DP to extract the selected keyfigure data at the aggregation level into an interface or a .txt file into APO directory and use some data transfer service such as EDI to take this data and send to TPM.
In my experience it is simple to define an integration process. The much larger and complicated aspects are the date adjustments and the aggregation levels.
Date adjustments:
Understand the basis of the data in APO and TPM. APO is usually at the requested delivery date or material availability date ( when the customer like a store wants the product). However TPMs are usually at the consumption date ( when an end customer like you and me but from store shelf). Depending on the product and business style this can mean several days difference. Let's say it is 25 days on average, you need to add 25 days to APO base line date to get the TPM consumption date.
Aggregation level:
This can be product or customer. If the planning in DP is at product sku level and the TPM is at packs or brand level, you need to aggregate the data up before loading to TPM. The same with customer.
To me the most complex part of the integration is to understand and transform the data in a meaningful way and a strategy to sustain this integration by keeping both DP and TPM in sync in terms of master data. Also important to have a process for identifying exceptions and failures. you send baseline from DP to TPM and if it fails, how do you know? how do you trouble shoot?
Hope these help.

Unable to pull records from APO

Hi,
I am trying to run a full load which extracts data from APO system to BW(2.1C)system.
The datasource in the APO system was changed sometime back and then the export datasource was done. I had replicated the datasource in BW and activated the transfer rules again.
But when I try to load the infopackage, it runs for a very long time and does not extract any records. In the monitor screen, under Details tab the Extraction , Transfer Idocs & Processing sections are all "red" & shows 0 records.
However, when I checked in RSA3 in APO , the extractor is pulling records.
I have checked the system connections and Basis team have also confirmed that there is no issue with the connections between the 2 systems.
Please help me to identify the problem and how to fix it.
Would appreciate any help in resolving this issue.
Thanks,
SK

In your BW system follow below steps,
1.In the monitor screen menu,Environmnet>Transact RFC> In the source system
2.This will take you to your APO system,user your APO client,user id and Password and login.
3.Just run the transaction and review the date and time of the LUW and compare with ur data load time.
Contact your basis team based on this info....
Hope this helps..
Raman

Data Extraction from hierarchies in BW info-object

Dear All,
I have a question here regarding master data extraction from hierarchies from BW info-object.
we have a info-object called as Customer which is defined in the standalone BW system. under the hierarchies for the customer we have the Channel defined.
Now I have created 2 info-objects in APO BW for Customer and Channel. channel is defined as an attribute of the customer.
I am wondering to do I extract data from the Customer info-object in standalone BW to both these charactersitics in APO BW?
Regards,
Kedar Agarkar

Hello Kedar,
Please open this thread on the SDN Forum "DATA WAREHOUSING".
I already talked with a BW colleague and he suggested to try there, it seems to be their issue.
Thanks and regards,
Michel Bohn
SCM-APO forum moderator.
Edited by: Michel Bohn on Mar 28, 2009 12:29 AM

Error taking data from APO data source

Hi,
We have created a planning area in the APO system using the t-code /SAP/APO/MSDP_ADMN.
We have generated a "export data source" and the data source 9ADA_3 has been created and it was replicated from APO to BI system. We have created the transformations and DTP, to load the data to Cube(Direct Access DTP).
But when we are executing the infopackage(Full update) we get the error "8 when starting the extraction program.Error in the source system".
The datasource is active in both BI and APO (ROOSOURCE table)system.
The RFC connection was checked and it was fine.
The cube is active. The background job is running fine and finishing without any error.
We have checked data in APO system via RSA3 tcode the data is available over there.
Please let me know what could be the error for the same.
Regards,
Lakshminarasimhan.N

please check a couple of things
1) The RFC connection is active between BI and APO
2) The user ID and password are correct and the authorization trace in SM59 works fine (most likely this is the case)
3) Check the short dump on APO for any additional info

APO/BW: How to get back from APO to BW/ How the send data from BW to APO

Hi,
1. I read that BW is the data layer for APO DP and therefore, I expected data to flow from BW, the data layer, to APO DP but not the reverse. Yet, I also read that data can be transferred from Livecache back to BW by using the extractor technology from BW. Can you clarify this for me?
2. If possible, please provide the steps to use this extractor technology to extract data back to BW in detail so that I can try it.
Thanks

Hi Amanda,
1. The data flow is from BW to APO, and from APO to BW.
from bw to apo, to feed planning area, characteristic value combination, in APO we have infocube to feed the data, as we know APO has BW inside (all the tcodes RSA1 etc are valid), datamart scenario is used here, we create infocube in APO, update rules, infosource and assign datasource from BW.
The data flow from APO to BW, to get the plan data inputted by user, we generate datasource in APO from planning area (compare with 'generate export datasource' from infocube), transaction /SAPAPO/SDP_EXTR. 'extractor technology' here in practice is just like when we are using datasource
take a look
http://help.sap.com/saphelp_scm50/helpdata/en/c9/199170f13711d4b2f20050da385632/frameset.htm
2. as mentioned in #1, you can use the transaction /SAPAPO//SAPAPO/SDP_EXTR to handle planning area-datasources in APO, or /SAPAPO/MSDP_ADMIN - planning area; choose your planning area, and menu extractor tools (or generate datasources), again datamart scenario is used here, after the datasource generated in APO, it's replicated in BW (APO act as source system), the rest steps are just same as when extract data from other SAP source system
simply what you need to practice is /SAPAPO/SDP_EXTR to 'generate export datasource', the rest steps should be familiar already for you
check
http://help.sap.com/saphelp_scm50/helpdata/en/8f/9d6937089c2556e10000009b38f889/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/e0/9088392b385f6be10000000a11402f/frameset.htm
hope this helps.

Extraction from APO to BI

Similar Messages

Maybe you are looking for