Extraction from SD to BW

Hi Friends,
i'm on a new project. Now, I have to create an open hub destination in version 3.x.
It has to be fulfilled with SD Data. And that's the matter. I don't know anything about extracting data from SD.
Anybody has documentation about it?
Thanks in advance.
Francis

check this link for SD Module:
http://help.sap.com/bp_biv235/BI_EN/html/BW/SalesAnalysis.htm
http://help.sap.com/bp_biv235/BI_EN/html/BW/CrossFunctAnal.htm
http://help.sap.com/bp_biv235/BI_EN/html/BW/SalesPlan.htm
http://help.sap.com/bp_biv235/BI_EN/html/Business_Blueprint.htm
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
Hope it helps.
Regards

Similar Messages

Extraction from 0HR_PY_1 error??????? pls respond immediately

i would need to extract data for payroll data from data source 0HR_PY_1 to BW based on the period of time say for example 01.2007 to 12.2007, the infopackage in Production is in full load i would need to initalise it to Delta. for this, i can first run full load for the period 01.2007 to 12.2007 then go for init of delta without data transfer and delta will be intialized and then select the radio button delta and go for delta extractions. this is what i need to do now.
for this i have extracted data from 0HR_PY_1 from R/3 to BW in full load, but in after extracting more than one crore records were extracted with a failure(red color status), it says that data is not extracted from correct client which seems to be wrong because only one client is maintained for R/3 Production and in RSA3 i could see no record for that data source, i wonder how those many records were extracted from ????.
and i also see the error saying "No assignment of payroll data to BW month". it is giving this error while extracting for the year 2007 but for the year 2006,2005 full load is done and it has not thrown such error.
do you think Assignment of payroll data to BW is compulsory, because i could see no assignment in R/3, if that is not done then how could 2006, 2005 years of data been extracted and when they are extracted i am not sure when and how they were extracted.

Hi,
Take a look on the notes: 585682,590957
With rgds,
Anil Kumar Sharma .P

Error while extraction from R3 : URGENT

While extracting from R/3 generic datasource(extracted through function module ) i am getting error as :
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the
But when I am running the FM or the extractor checker it is giving actual records with our any error
Could you please help me what to do ?
No job log in job overview , only it is given Cancelled.

Some possibilities:
1. Replicate the data source and then try loading.
2. Check the RFC connection ; may be it is broken.
3. Check the update rules to see it is active.
Ravi Thothadri

Short dump error when extracting from one of the datasource in R/3 to BW

When extracting from one of the datasource I am getting the short dump. below is the source code of the same.
Source code extract
Get boundaries of next TID block
L_FROM_INDEX = L_TO_INDEX + 1.
IF L_FROM_INDEX GT NFILL. EXIT. ENDIF.
L_TO_INDEX   = L_TO_INDEX + L_BLOCK_SIZE.
IF L_TO_INDEX GT NFILL.
L_TO_INDEX = NFILL.
L_BLOCK_SIZE = L_TO_INDEX - L_FROM_INDEX + 1.
ENDIF.
Create hashed index on TID of TID table
CLEAR L_TH_TID_IDX.
LOOP AT TIDTAB FROM L_FROM_INDEX TO L_TO_INDEX.
L_S_TID_IDX-TIDIX = SY-TABIX.
L_S_TID_IDX-TID   = TIDTAB-TID.
COLLECT L_S_TID_IDX INTO L_TH_TID_IDX.
ENDLOOP.
Select TID block from STATE table
SELECT * INTO TABLE L_T_STATE
       FROM ARFCSSTATE FOR ALL ENTRIES IN L_TH_TID_IDX
       WHERE ARFCIPID   EQ L_TH_TID_IDX-TID-ARFCIPID
         AND ARFCPID    EQ L_TH_TID_IDX-TID-ARFCPID
         AND ARFCTIME   EQ L_TH_TID_IDX-TID-ARFCTIME
         AND ARFCTIDCNT EQ L_TH_TID_IDX-TID-ARFCTIDCNT
       ORDER BY PRIMARY KEY.
Consistence check
DESCRIBE TABLE L_T_STATE LINES L_LINES.
IF L_LINES NE L_BLOCK_SIZE OR
   L_LINES EQ 0.
MESSAGE X097(SY).
ENDIF.
PERFORM DELETE_BATCH_JOB
        USING    L_T_STATE
        CHANGING L_S_TID1.
Update LUW-Status und Zeit
CLEAR L_T_STATE_IDX.
CLEAR L_TH_TID2_IDX.
CLEAR L_T_TID.
LOOP AT L_T_STATE INTO L_S_STATE.
L_S_STATE_IDX-TABIX = SY-TABIX.

Hi Pavan,
                 This is a table space error.
Regards,
rahul

TS3694 when doing a restore to try and solve a wifi problem with my iphone 5 i got past the point where the software was extracted from my phone but then an error message came up saying that the phone could not be restored because of an unknown error (301

when attempting a restore, as suggested, to try and fix a week wifi signal on my iphone 5 I got past the point where the sopftware was extracted from my phone but then an error message appeared saying that the phone could not be restored becase of an unknown error (3014). I have tried about 20 times to make it work after trying a number of suggestions I have seen online. My phone gives me know response accept showing a picture of the cable and the itunes symble an the screen permanently - please help

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

Error while extracting from BI source

Hi,
We are facing a wierd problem:
Scenario:
Loading data from one DSO to another DSO with the help of transformation
The DTP fails at second data package each time. First data package goes successfully but it fails at the second data package) We have tried to vary the data package for e.g. 100 records, 5 records etc.....no matter what we do the load fails at the second data package with the following error message.
Error:
Data package processing terminated
Error while extracting from source EPUD0002 (type InfoProvider)
System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
Unknown error in SQL interface
Error reading the data of InfoProvider EPUD0002
Exception CX_RS_STEP_FAILED logged
Workaround:
We tried to increase the number of data package size so that all the records can be processed in only one data package and the load has never to request for 2nd data package . BUT as the data package size is big it takes long time to process and never completes....
FYI...Our transformation has lots of abap coding ...
Addn Info:
SAP_BW 700 0010
BI_CONT 703 0005
SAP_BASIS 700 0010
Any help will be highly appreciated...
- Amit

There must be some bug in the code which is causing this issue.
try to debug it,
refer: /people/community.user/blog/2007/03/29/sap-netweaver-70-bi-extended-capabilities-to-debug-a-data-transfer-process-dtp-request
/people/dirk.herzog/blog/2005/02/11/abap-development-in-sap-bw

Generic Data Extraction From SAP R/3 to BI server using Function Module

Hi,
I want step by step procedure for Generic Extraction from SAP R/3 application to BI application
using Functional module.
If any body have any Document or any PPT then please reply and post it in forum, i will give point for them.
Thanks & Regards
Subhasis Pan

please go thr this link
[SAP BI Generic Extraction Using a Function Module|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/sap%20bi%20generic%20extraction%20using%20a%20function%20module.pdf]
[Generic Data Extraction Using Function Module |Re: Generic Data Extraction Using Function Module;

Extraction from SAP R/3

Hi Experts,
I am currently working on a POC for a client that requires that we show them how to extract from SAPR3 using their own Structure.
I have a list of Entities that I need to enter into the Hierarchies tables: Setnode and Setleaf, CSKS/CSKT for these Entities. The kind of guidance that I would need is once I'm logged on to R3, what screens would I need to know where to enter this particular information?
Any useful answer will be rewarded with suitable points.
Thanks in advance!

Hi Experts,
I am currently working on a POC for a client that requires that we show them how to extract from SAPR3 using their own Structure.
I have a list of Entities that I need to enter into the Hierarchies tables: Setnode and Setleaf, CSKS/CSKT for these Entities. The kind of guidance that I would need is once I'm logged on to R3, what screens would I need to know where to enter this particular information?
Any useful answer will be rewarded with suitable points.
Thanks in advance!

Steps for Data extraction from SAP r/3

Dear all,
I am New to SAP Bw.
I have done data extraction from Excel into SAP BW system.
that is like
Create info objects > info area> Catalog
--> Character catalog
--> Key catalog
Create info source
Upload data.
create info cube
I need similar steps for data extraction for SAP R/3
1. when data is in Ztables ( using Views/Infosets/Function etc)
2. When data is with Standard SAP using Business Content.
Thanks and Regards,
Gaurav Sood

hi,
chk the links
Generic Extraction
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
CO-PA
http://help.sap.com/saphelp_46c/helpdata/en/7a/4c37ef4a0111d1894c0000e829fbbd/content.htm
CO-PC
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
iNVENTORY
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Extractions in BI
https://www.sdn.sap.com/irj/sdn/wiki
LO Extraction:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Remya

Do not Extract from PSA but Access Data Source (for Small Amounts of Data)

Hi Experts,
In the DTP, the above option is available for Full Loads for certain extractors but not for others, particularly, certain HR extractors?
Is there a way to make it available for HR extractors? Is there a setting that needs to be updated in ECC or in BI?
Thank you for your help!

Hi,
There is no special setting for this, Please see the detail description:
Data is not extracted from the PSA for the DataSource; it is requested from the data source directly at DTP runtime.
Use
You use this mode for small data sets and full uploads, for example, small sets of master data. With file source systems, note that the file has to be available on the application server.
Dependencies
You do not have to create an InfoPackage in order to extract data from the source.
Data in the data source is accessed in "direct access mode". This has certain consequences, especially if you are extracting data from SAPI systems:
Data is extracted synchronously. This places a particular demand on the main memory, especially in remote systems.
The SAPI extractors may respond differently than during asynchronous load since they receive information by direct access.
SAPI customer enhancements are not processed. Fields that have been added using the append technology of the DataSource remain empty. The exits RSAP0001, exit_saplrsap_001, exit_saplrsap_002, exit_saplrsap_004 do not run.
If errors occur during processing in BI, you have to extract the data again since the PSA is not available as a buffer. This means that deltas are not possible.
In the DTP, the filter only contains fields that the DataSource allows as selection fields. With an intermediary PSA, you can filter in the DTP by any field.
Regards,
Kams

I just burned photos from different albums to CD-R. When I checked on the photos I burned on the CD-R afterwards, I noticed that the titles of each folder that these photos are extracted from appear. How can I get rid of these titles???

I just burned photos from different albums to CD-R. When I checked on the photos I burned on the CD-R afterwards, I noticed that the titles of each folder that these photos are extracted from appear. How can I get rid of these titles???

iPhoto 9.6 cannot open iPhoto Libraries on CD/DVD. The iPhoto Library needs to be on a writable storage. Copy the iPhoto library from the disk to a folder in your Pictures folder. And then run the iPhoto Library Upgrader on that copy, see this link: iPhoto '11: About the Library Upgrader

Master data extraction from SAP ECC

Hi All,
I am a newbie here and teaching myself SAP BI. I have looked through the forums regarding master data extraction from SAP ECC in all forums but could not answers for my question. Please help me out.
I want to extract customer attributes from SAP ECC. i have identified the standard data source 0customer_attr and replicated in SAP BI. I have created infopackage for full update. I validated the extractor checker(RSA3) and found 2 records for 0customer_attr.
When I run the info package, the info package remains in yellow state until it times out. Please let me know in case i am missing anything, Please let me know if there is any other process for master data extraction similar to transaction data extraction.

Hi All,
i did the below and afte clicking execute in the Simple job, it takes me back to the Monitor Infopackage screen.
From your info pack monitor --> menu environment-->job overview--> job in the source system--> prompts for source system(ECC) user id and password, enter them, you will get your job at SM37(ECC), select job and click on log details icon. there you can see details about your error. please share that error screen shot.
Please find the screenshots.
I did an Environment -->Check connection and found the below,

Extract from BSAS and BSIS in FI to BW

Hi,
Can someone please recommend a method of extraction from BSAS and BSIS to BW.Is there a standard datasource available for this or do we have to do it through Generic extraction?
thanks
Srishti

Hi Priya,
To avoid the complexity of converting XML's to Idocs without XI or ABAP programming you can easily go for the LSMW uploading.
I know your company does not want to use the LSMW process.However if you are trying with the XML ports for the XML to Idoc convertion it will further involve extensive coding and complexities.
On the other hand you can extract MDM data in simple Excel format and then use LSMW with simple mappings and conversion to upload this master data in ECC without much difficulty.
As to work with the MDM and ECC system data transfer avoiding both XI and Lsmw as the data transfer tools will make your scenario more complex and error prone with ofcourse the extra time factor involved.
Hope it helps
Thanks & Regards
Simona Pinto

Slow extraction from Source System

Experts,
I'm on the basis team and we're trying to figure out what we can do to increase the performance of a BI extraction from an ECC source system.
Our BI team is doing a Full extraction of Data Source 0UC_SALES_STATS_02 which has about 24 million records. This has been running for about 2.5 days and has only extracted 12.5 million records according to RSMO
I'm no expert on BI performance, but I'm trying to get there. One thing we noticed is that we have over 1000 Data Packages and each has about 11K records per package.
RSBIW "control params for data transfer" in the BI system is set as this:
LOGSYS     -- Max KB. -- MAX Lines -- Freq -- MAx PROC -- Target Sys -- Max DPs
OURBWSYS -- 20000 --          0             -- 10    --        3            --     blank        --   blank
OURECCSYS -- 20000 --          0             -- 10    --        3            --     blank        --   blank
Also we only see one background process running on the ECC system which is the Zprogram that was written to perform the extract.
We also checked IMG - sap netweaver - BI - links to other source systems - maintain contrl params for data xfer
Freq/IDOC = 10
pkg size = 50,000
partition size = 1,000,000
We are on NWEHP1 for our BI system
We are on ECC6.0 EHP3sp5 for our ECC system
We use Oracle 10.2.0.4.0 with it fully tuned
We also think we have all the correct tuning parameters in our ECC/BI systems. There are a few tweaks we could make but I don't see any glaring problems. All our memory parameters seem to be in line with what is recommended.
We do not see any kind of Memory/CPU bottlenecks.
Do you think the many data packages and small records per package is a problem?
Any tips to increase performance would be helpful, I'm still looking.
I saw this wiki thread and it mentions to look at tcode RSA3 in ECC system to monitor long extracts.   But I have looked at this and I have not figured out what all needs to go into the fields to correctly run this.
Any help you can provide would be great.
Thanks,
NICK

HI Nick,
This problem is due to the huge volumes of data and the job is ruinng from long time onwards, normally we will kill the job if it exceeds more than 8 hours time while extracting the data.
Please suggest your BI Team to pull data in small volumes by providing selections in info package. This will drastically redcues the time for extraction of huge data and will also not consume all the resources in system.
Please pass below links to your BI team as this is completely releated to design issue.
http://help.sap.com/saphelp_nw70/helpdata/en/39/b520d2ba024cfcb542ef455c76b250/frameset.htm
Type of DSO should be write optimized to increase load performance.
http://help.sap.com/saphelp_nw70/helpdata/en/34/1c74415cb1137de10000000a155106/frameset.htm
2. And at your end look for the table spaces of the PSA tables, may be it is execeeding its capacity and make it as automatic. instead of manullay assigning the space at the regular intervals.
Hope this helps.
Regards,
Reddy
Edited by: Reddybl on Apr 2, 2010 12:23 AM

Extraction from SAP ECC to SAP BI

What are the steps for Extraction from SAP ECC to SAP BI? Thanks.

Hi,
we have two types of extractions 1) Application specific 2)cross application
under applicatin specific -->we have customer genenrated and business content extractions
under customer generated means LIS, CO-PA, FI-SL(i.e no ready made data source in business content so we have to generate datasource)
Business content means there is ready made business content datasource so we can use it
LIS,LO --> when ever we go for extracting logistics informatin
LO steps
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
LO Cockpit (Use transaction LBWE)
/people/vikash.agrawal/blog/2006/12/18/one-stop-shop-for-all-your-lo-cockpit-needs
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/u/21406 [original link is broken] [original link is broken]
/people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
To understand LO extraction go through these weblogs by Roberto
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
under cross Applicaion
Generic extraction-->table, view, infoset query, function module
Generic extractors are of 3 types:
1. Based on table/view
2. Based on Infoset Query
3. Based on Function module
GenericSteps
Log on sap R/3.
Step 1. create a table or view for generic extraction in se11.
Step 2. Goto t-code RSO2
Step 3. Here u have to decide whether to extract transaction data or master data attributes or texts.
Step 4. suppose if u have opted for transaction data,then give name in the column ex:ztd_m(data source name)
Step 5. select create button,this will take u to another screen.
Step 6. Here u have to decide from which application component u r extacting data.Ex: SD,MM,..
Step 7. in this screen u have to fill short disciption,medium,long( these r mandatory).
Step 8. then U have to Table name or view name which u have created in se11.
Step 9. I f u want to maintain generic delta then u can select generic delta in top left hand side corner.
Step 10. in next screen u have to give some field which is primary key.
step 11. here u to specify whether time stamp or cal day or numeric pointer depending on u r requirement.
step 12. then u have to specify whether new status for changed records or additive delta.
If u choose additive delta ,then u have to load data to infocube or ods object.
If u choose new status for changed records, then u to load data to ods object only.
Step 13. then save it.
Step 14. then logon to sap bw ,then replicate the data source then as usuall.
COPA
CO-PA--> for financial info
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COPA/COPA.pdf
You can browse forum for more detailed info..
Regards,
B

How do I save a still that I have extracted from iMovie and save it to iPhoto?

I'm trying to save a still that I have extracted from imovie. So far, all I can see is that it can be saved in the imovie project. I need to save it to iphoto. Any help would be appreciated. I'm running Lion and have aperture too.

Imovie 11? It isn't that easy. You could navigate to the movie event, drag that into Streamclip, and use MPeg streamclip to make a still from the movie. The freeze frame isn't a photo you can get out of imovie, as far as I know.
Here is a youtube video on how to do it with iMovie 11.
Hugh
http://www.youtube.com/watch?v=o7ze770SUwY

Extraction from SD to BW

Similar Messages

Maybe you are looking for