Extraction issue after sap note

Hi Experts.
After applying sap note 1331090 to fix a program error while running extractoru2019s, one issue was solved but another one came up.
Now when a datasource is executed it appears to run without problems, but no data is extracted, it finishes successfully with 0 records, even when there´s data to extract. This happens for all datasources generated for our planning area.
Someone ever saw this issue?
Thanks in advance,
TP

Hi,
You could have missed some other Sub notes of this main note which you have mentioned. Kindly go through the note carefully and reapply the same.Still if you face the problem then I suggest you raise the issue with SAP.
Thanks,
Harsh

Similar Messages

Issue with SAP Note Implementation 977220

Hi ALL,
             I am trying to implement the SAP Note: 977220 for the Report RFIDPL06 (FI Localization for the Country Poland).
While trying to implement the SAP Note: 977220, the system (version 4.6 C) successfully implements (Green Traffic Light) the following SAP Notes: 975358, 990307 & 1016797 as a pre-requisite. However after that when the system is trying to implement the SAP Note: 977220; it's showing the yellow traffic light because it can't find the followings:
1. Context Block (Not Found)
    IF documents-egrkz = '9' OR documents-egrkz = '2'
      IF documents-ktosl = 'ESE'.
        doc_sum-tax = '0'.
        APPEND doc_sum. "943278
      ENDIF.
2. Delete Block (Not Found)
      COLLECT doc_sum. "943278
What can I do to resolve the issue ?? Any help will be highly appreciated!!
BR.
Tanmoy

Dear ALL,
                  I have currently raised a OSS mesage to the SAP support.
BR.
Tanmoy

Client GWI version10: setup.msi issue after implementing note 1562571

Hi,
I have installed version 10 of the client based groupware integration on a CRM 6.0 system. Up till now, we were not able to let synchronization work (screen with the options was greyed out).
I had created a message for SAP and after some exchange they advised me to implement note 1562571:Solution for ISScript.msi error. We were not having this error but as SAP had a look into our system, I followed the advise.
After implementing this note via SNOTE, I got an error (which I didn't had before!) when I tried to install the synchronization software saying that the setup.msi was not correct (taking a look into SE80 bsp appl: CRMCMP_GW_WC, the file attached is setup.exe).
Did someone had the same issue? Any help is very appreciated!
Thanks in advance,
Yasmine Marchal

Hi ,
I think there is a note which can solve the msi issue , I havent implemented it .. please check Master Note - 1563898 ( this is for 7.0 EHP1 i think ) . You can look for the right note for CRM 6.0 at the service marketplace.
I have configured Groupware Int for Outlook 10 and CRM 7.0 EHP1 . Initially we were facing this error where the SAP DEFAULT profile was getting downloaded when we clicked on the Edit Sync settings. Is this what was happening with you ??
We created a new profile in GWIPROFILE and maintained the crm_ui_profile parameter with the correct business role in SU3 and now we can synchronize.
Let me know if you were able to resolve the issue with a note .
Edited by: Neha M on Sep 29, 2011 1:24 PM

Bex Analyzer - Selection criteria missing after SAP Note application

Good evening,
I have this problem with my BeX Analyzer.
I have import a Sap Note number 0001072913 to resolve a problem. To implement this note the SapNoteAssistant downloads these list of notes :
1061607
1066988
1083328
1086902.
I have applicate these list of notes, after the system doesn't make me anymore the popup to insert the selection of criteria filter of query.
My system information:
- OS - Windows XP sp.2
- Excel 2003
- SapGui 710 Final Release - Version 7100.1.5.1033 - Level Patch 5
- Sap System - SAP NetWeaver 2004s with SAPBW 700 Patch Level 7
- Database - Oracle 10.2.0.2.0
When I execute sapbexc710.xla in my local directory C:\Program files\Sap Shared\BW the system give me this result :
BI 7.10
AxInterop.SHDocVw.dll     7100.1.300.1
BExAddin.dll     7100.1.300.949
BExAnalyzer.exe     7100.1.300.949
BExAnalyzer.xla     7100.1.300.21
BExApi.dll     7100.1.300.949
BExCAControls.dll     7100.1.300.132
BExCommon.dll     7100.1.300.132
BExCommunication.dll     7100.1.300.132
BExControls.dll     7100.1.300.132
BExControls2.dll     7100.1.300.132
BExDialogOpenSave.dll     7100.1.300.132
BExDiffViewer.dll     7100.1.300.132
BExFormulaParser.dll     7100.1.300.132
BExGeneratedAll.dll     7100.1.300.132
BExInstaller.exe     7100.1.300.949
BExOpenSaveServices.dll     7100.1.300.110
BExQueryDesigner.dll     7100.1.300.519
BExQueryDesignerFormulaParser.dll     7100.1.300.2
BExQueryDesignerStarter.exe     7100.1.300.519
BExRDRuler.dll      7100.1.300.366
BExReportDesigner.dll     7100.1.300.366
BExReportDesignerStarter.exe     7100.1.300.366
BExSelectorAPI.dll     7100.1.300.230
BExSelectorDialog.dll     7100.1.300.230
BExSharedImageList.dll     7100.1.300.132
BExThemes.dll     7100.1.300.132
BExVariableScreen.dll     7100.1.300.949
BExWebApplicationDesigner.exe     7100.1.300.387
BExXMLControls.dll     7100.1.300.132
BExXMLServices.dll     7100.1.300.132
Interop.MSXML2.dll     3.0.0.0
Interop.SAPLogonCtrl.dll     7100.1.300.1
Interop.SHDocVw.dll     7100.1.300.1
SAP.Connector.dll     2.0.0.23
SAP.Connector.Rfc.dll     2.0.0.23
sapbwwmd.ocx     7100.0.4300.0
SAPWADMXHTML.dll     7100.1.201.2
WADBackendServices.dll     7100.1.300.387
WADBExData.dll     7100.1.300.387
WADBISPParse.dll     7100.1.300.387
WADChartControlHost.dll     7100.1.300.387
WADConst.dll     7100.1.300.387
WADControllib.dll     7100.1.300.387
WADConversion.dll     7100.1.300.387
WADHTMLEditHost.dll     7100.1.300.387
WADHTMLEditing.dll     7100.1.300.387
WADLowLevelServices.dll     7100.1.300.387
WADMain.dll     7100.1.300.387
WADMapControlHost.dll     7100.1.300.387
WADMetadataGeneration.dll     7100.1.300.387
WADMXHTML.dll     7100.1.300.4
WADPageobjects.dll     7100.1.300.387
WADPropertiesctl.dll     7100.1.300.387
WADRDHost.dll     7100.1.300.387
WADRDLoader.dll     7100.1.300.387
WADRTFIntellisense.dll     7100.1.300.387
WADRTFIsRegEx.dll     65176
WADServices.dll     7100.1.300.387
WADSnapShots.dll     7100.1.300.387
WADStyleSheetServices.dll     7100.1.300.387
WADTagLocator.dll     7100.1.300.387
WADTokenSearch.dll     7100.1.300.387
WADWizTemplate.dll     7100.1.300.387
sapbexc710.xla     7100.1.300.004
BW 3.5 Components
sapbex.xla     3500.11.051
sapbex0.xla     7100.0.300.525
wdba.dll     3500.11.0.58
wdbbapp.exe     3500.11.0.53
wdbbctrl.ocx     3500.11.0.139
wdbbwait.ani     6836
wdbcbexc.dll     3500.11.0.106
wdbdadpt.ocx     7005.11.0.202
wdbfodlg.dll     3500.11.0.128
wdbmbm2.ocx     3500.11.0.89
wdboobjb.dll     3500.11.0.39
wdbpwpub.exe     3500.11.0.341
wdbranim.exe     3500.11.0.5
wdbrlog.ocx     3500.11.0.596
wdbrlog.exe     3500.11.0.6
wdbrtre2.ocx     3500.11.0.11
wdbrprn.ocx     3500.11.0.1
wdbspres.dll     3500.11.0.151
wdbtask.exe     3500.11.0.23
wdbvVed.dll     3500.11.0.83
wdbwpub.exe     3500.11.0.131
wdbwwiz.dll     3500.11.0.78
wdbz.ocx     3500.11.0.14
bwcrw32.exe     1.0.0.4
MapObjects
af20.dll     2.0.1.0
aiimage20.dll     2.0.1.0
dforrt.dll     6.0.612.101
efileio.dll     6144
elib.dll     8.3.1.0
ergxlib.dll     9728
ethrlib.dll     8704
iso8211.dll     131072
libtiff.dll     352256
memfile.dll     1.0.0.1
memtable20.dll     2.0.1.0
mo20.ocx     2.0.1.0
mo20.lic     391
mobase.dll     2.0.1.0
mofeat.dll     2.0.1.0
mogridio.dll     2.0.1.0
mtch.dll     8.0.185.0
pe.dll     4.0.0.0
sg.dll     3.0.2.1
shape20.dll     2.0.1.0
OLE for OLAP
mdrmdlg.dll     3.6.0.1
mdrmsap.dll     3.6.0.1
mdxpars.dll     6405.5.23.15
saprfc.ini
scerrlkp.dll     3.6.0.1
SAP GUI core components
chart.ocx     3.80.6.87
icdataflow.ocx     2.0.0.23
icjoin.ocx     1.0.1.35
sapgradp.ocx     7100.1.5.479
sapcalen.ocx     7100.1.5.126
sapchart.ocx     7100.1.5.810
sapbtmp.dll     7100.1.0.1309
librfc32.dll     7100.1.81.5615
wdtlog.ocx     7100.1.5.71
wdttree.ocx     7100.1.5.286
wdtaocx.ocx     7100.1.5.61
sapdatap.ocx     7100.1.5.255
sapfctrl.dll     7100.1.5.320
sapfcust.exe     7100.1.5.410
sapfdraw.dll     7100.1.5.256
sapfewrm.dll     7100.1.5.337
sapfhook.dll     7100.1.5.206
SAPCHARTCONTROLLib.dll     6405.5.28.7809
AxMAPCONTROLLib.dll     1.0.0.0
AxSAPCHARTCONTROLLib.dll     6405.5.28.7809
MAPCONTROLLib.dll     1.0.0.0
Additional components
awkone.ocx     7.0.0.1
formx.ocx     2.0.30.1
sizerone.ocx     7.0.0.16
otxrt.dll     2.0.30.1
vsflex7l.ocx     7.0.0.112
vsocx32.ocx     5.0.4.50
vsocx6.ocx     6.0.0.52
Synfusion components
Syncfusion.Core.dll     4.402.0.51
Syncfusion.Grid.Base.dll     4.402.0.51
Syncfusion.Grid.windows.dll     4.402.0.51
Syncfusion.Shared.Base.dll     4.402.0.51
Syncfusion.Shared.Windows.dll     4.402.0.51
Syncfusion.Tools.Base.dll     4.402.0.51
Syncfusion.Tools.Windows.dll     4.402.0.51
Microsoft core components
dhtmled.ocx     6.1.0.9232
mfc42.dll     6.2.4131.0
msflxgrd.ocx     6.0.84.18
msvcp60.dll     6.2.3104.0
msvcrt.dll     7.0.2600.2180
msvcrt40.dll     5.1.2600.2180
oleaut32.dll     5.1.2600.3139
olepro32.dll     5.1.2600.2180
stdole2.tlb     3.50.5014.0
scrrun.dll     5.6.0.8820
triedit.dll     6.1.0.9227
richtx32.ocx     6.1.97.82
ADODB.dll     7.10.3077.0
dte.olb     7.10.3077.0
EnvDTE.dll     7.0.9466.0
Microsoft.mshtml.dll     7.0.3300.0
Microsoft.StdFormat.dll     7.0.9466.0
Microsoft.VisualBasic.Compatibility.Data.dll     7.10.3077.0
Microsoft.VisualBasic.Compatibility.dll     7.10.3077.0
MSDATASRC.dll     7.0.9466.0
MSO.DLL     10.0.6714.0
msoutl.olb     10.0.2607.0
Office.dll     11.0.5530.0
stdole.dll     7.0.9466.0
VSLangProj.dll     7.0.9466.0
Help me, please.

Is it just for one query or for all of them...(for all them)
If allowed in the system create a new one and check...(yes but the query don't work).
If it has effected all of them you can revert back the note changes.. Check again..
(to revert back the note is a disaster. There are more notes one above the other... I should set all the objects modified to original version one to one)
If it works now issue a message to SAP (I think it's a good idea)

Download issue with SAP Note

Hi,
While tryign to download the SAP Note "1300023", the system gave a message "System setting does not allow changes to be made to object NOTE 0001300023".
On further checking the details we got the details "If you want to edit the object NOTE 0001300023 in this SAP System, have your system administator set the SAP System to "modifiable" for this object."
But when we checked SAP Market place we came across a SAP note "0000683678 System setting does not allow changes to Z objects", which seems to be resolution to our problem of downloading the note.
Can some one please provide some input on how the issue "System setting does not allow changes to be made to object NOTE 0001300023", can be resolved.
So, do we need to:
1. Implement the SAP Note 0000683678 before implementing 1300023 OR
2. Change some setting in Transport Organizer tools (Transaction SE03) >>>Administration node >>> Set system change option.
Regards,
Nitin S.

Dear All,
Thanks for your replies.
The following options had to be set to "Modifiable" to download the SAP Note:
Generation of Components for Service Control Center        /1CAGTF/        Not modifiable
/1***/                Not modifiable
SAP Solution Tools Plug-In: Database                             /SDF/                Not modifiable
/SMI/                Not modifiable
SAP Solution Tools Plug-In: Monitor                                /SOMO/        Not modifiable
SAP Solution Tools Plug-In: Trace                                   /SQLR/                Not modifiable
Service Software Addon Packages                                  /SSA/                Not modifiable
Regards,
Nitin S.

Issue : Regarding SAP Note 1465628

Dear All,
we have to Implement the SAP Note No 1465628 , For that During manual Corrections , we are Unable to Upload the HR_IN_ESI_005_99 , it is saying
ERROR Ocuured unknown file Format (unknown)
Our System is ECC6 , Please help on this to Get the SAP note Apply.
Thanks & Regds
Manish
Edited by: Sikindar on Jun 10, 2010 5:18 PM

Regarding your query, to use the transaction SFP you have to install and configure ADS (Adobe Document Services). Can you please check whether you have done the necessary configuration or not?
Please have a look at note 894009 and the reference note attached to it.
Regards
Ramana

Issues regarding SAP note 505030

Hello,
We are going to have an upgrade in our system to SRM 7.0. We are
designing our scenario to have shopping carts creating purchasing
requisitions that will return to Sourcing Cockpit and become a new
shopping cart. However, we found the note 505030 that says:
If you create purchase requisitions in the R/3 system from SRM shopping
carts, then no SRM shopping cart may be created from these purchase
requisitions in the subsequent process, which in turn creates a
purchase order in the R/3 system. Even though it is technically
possible at the moment, this causes problems in the subsequent process
(goods receipt confirmation).
We have the following questions:
1) Does the problem happen only in SRM goods receipt confirmation or
also in transaction MIGO in ECC?
2) What exactly is the problem in the goods receipt confirmation? Is
there any development (BADI) that could fix it?
Has anyone implemented this scenario?
Thanks, Thaí

I don't have experience in implementation of this scenario but I think the problem will be now you have two SC references to follow on documents in backend and will have issue while updating backend data in SRM through get status job.

Download Fireftp issues after restarting not downloaded

Something is wrong. I downloaded FireFTP and even donated $10. It says to restart and I did but FireFTP doesn't download and add to firefox. Please HELP. Need to get my website up and running.

FireFTP is a Firefox add-on. You will not find it in Finder. You will find it on the Firefox menus I mentioned in my earlier post.

SAP note 709354 - DB Clustering

An extract from the sap note:
--->>>
With SAP Enterprise Portal 6.0 on Web AS 6.40, DB Clustering will not be officially supported. This applies to Microsoft SQL, as well as to Oracle Database cluster implementations. The technical feasability of active/active DB-Cluster solutions (like ORACLE RAC or MS SQL in active/active cluster mode) in conjuction with SAP Enterprise Portal 6.0 on Web AS 6.40 Support Pack Stack 01 is under investigation. But there are currently no plans to release it within the NetWeaver '04 timeframe. Since some customer projects have shown that EP 6.0 SP2 is able work on top of an active/passive DB-Cluster-Solution SAP is willing to help customers on a project to get DB-Cluster related problems solved (in case of Oracle this is true for Fail Over mechanisms, but not for Real Application Clustering (RAC)). If you are interested in setting up DB-clustering on your own risk and on a project base, please contact SAP NetWeaver Product Management via your SAP contact in sales or consulting.
<<<---
Would someone from SAP like to comment on this, does it mean that active/passive clustering as already supported or that ANY mode of clustering will be unsupported. And within the timeframe of NW04?? Isn't that until around 2013?
Has anyone had any experiences with active/passive clustering, especially Oracle on Windows, with EP6 SP3 and higher?
Although the note indicates that it 'can (and probably will) be changed without notice' it remains a slightly worrying note, as I'm sure we all want to cluster our production portal central instance and database don't we?

The problem no longer exists. If you maintain the codepages equally in the external DB and in the SAP BW DB, everything should work fine.

SAP note 105621 -- Hiding Cost Conditions in Sales Document

dear experts:
i am facing a issue regarding SAP Note 105621. in this note it says we need to implement user exit
USEREXIT_FIELD_MODIFICATION
USEREXIT_FIELD_MODIFIC_LEER
USEREXIT_FIELD_MODIFIC_KZWI
USEREXIT_FIELD_MODIFIC_KOPF
USEREXIT_PRICING_CHECK
and create 2 new Include ZZAUTH01, ZZAUTH02.
my questions are:
1. are these user exits listed above in program LV69AFZZ?
2. I set break point in these user exits, but none of them stop the process when i run t-code VA02.
i am confused here, could anyone tell me how to get into these exits when run VA02?
THANKS.
Hongtao

hi GSL,
the configurations for this note is not done yet, and i just want to dubug into these eixt. but i don't why the process can not come into those exits.
and there are 5 exits and 2 incldes, do we need to implement them all?
thank you very much for your response.
regards,
hongtao

SAP Notes and Packages

HI
Before uploading the SAP release note or packages What are things should taken care and also help me in the uploading the SAP Notes or packages
regards
sathish kumar

The care required to be taken is to go through the notes carefully & analyse implication.
If SAP Note is to be applied, It is normally done by Abaper, incase of Code Correction, alternatively, if customizing changes recommended, it requires to be customized.
Incase of Package application, this is normally done by basis person.
After SAP note / package applied, we require to test the scenarios in test server, before applying the same to Production Server.
Regards,
Rajesh Banka

Critical Issues During SAP Implementation or After Golive

Can anybody tell me one of the most critical/ challenging issues During SAP Implementation or After Golive
in these modules:-
MM implementation
PP implementation
SD implementation
FI/CO implementation
PS implementation
QM implementation
HR implementation
BI implementation
XI implementation
Thanks and regards
RS

hi,
I will list out few of critical issues in
Implementation :
1 . Ensure 100% mapping of business process for all modules with SAP(avoid customization in support phase)
2. Unit & Integeration testing should be through with all validations
3. Master datas(Vendor,Customer) care must be taken will uploading datas thru LSMW,
If there are common vendors for all plants,Create a vendor for a plant extend it to other plants
4. Check tax procedures are customized according to requirements.
5. Complete all print document customizations before go live
6. Complete end user training(2 or more cycles) should be top priority before go live(This will avoid
cancellation/reversal of documents after post go live)
7. Ready with standard MIS reports & customized reports for business decision making
8. Excise opening balance updation in tables for RG1 register in tables(Note 951955) on go live
9. Check all tables datas are updating correctly
10. Declare go live to SAP Support
11. Check All user authorization should be correct according to their roles.
12. Centeralize all master datas creation(avoid duplication)
13. Create transaction variants to avoid entires in unnecessary fields & make certain fields mandatory.
14. Ensure document numbering is completed for all documents
15. Validate accounting entries are hit properly according to requirement in quality client with FI CTM(Core team member).
After Go live :
1. Missing authorization for users will play key part here,For ex : PGI while doing delivery,Excise capture & post in MIGO/J1IEX.
2. Do internal audit every month,identify transactions if there will possibility for misuse or wrong entries,requires validation,identify users weak in certain areas.
3. Identify there is enhancements to be done in transaction process(By step-2)
4. Prepare a list of month & year end activities to be performed for all modules give to users
5. Prepare a list of frequently used transaction codes module wise give it to users
6. If there is subcontracting,ensure challan creation,GR,reconcillation should be done regulary(monthly)
7. Train the users,take reports in respective modules.
8. Additonal customization might be done in print documents.
9. Instruct users/CTM's to adapt SAP Standard practise
10. Update excise tax rates after every indian budget
Hope it helps.
Edited by: Jeyakanthan A on Apr 29, 2010 6:48 PM

SAP Query selection screen issues after ECC upgrade

Hi all
We have a custom query created and assigned to a custom transaction code, which after upgrade to ECC 6.0 we find that the selection screen layout is different from what was available in 4.6C system.
All the fields required are available.
However, the sequence of the fields on the screen is different from the 4.6C after the upgrade.
Can anyone help identify the issue so that the issue can be resolved?
Thanks
Vinodh S

Hi N_niki
There is no resolution as such.
We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
Hope this helps.
Thanks
Vinodh Sudhakaran

Issue regarding Web Application Designer (WAD) in SP25 / SAP note 1558066

Dear all,
we recently applied SAP NetWeaver BI SP25. After the update we encountered severe issues in WAD and applied SAP note 1558066, this means I deleted from RSZWMDITEM all records having MDITEMNAME TARTITLE and afterwards updated metadata.
The situation improved a lot, i.e. now I can open web templates or close WAD, but I still cannot drop Web Items in layout tab. I am able to include Web Items in overview tab, but again in layout tab I cannot change the sorting or remove Web Items.
Did anyone come across similar issues and find a solution?
Thanks for your input, best regards,
Bjoern

Hello Björn
I've exactly the same problem. See
Could you solve the problem and if yes, how did you do it?
Thank's
Patrick

After SAP GUI 7.10 installation IE7 does not work properly

Hello,
After SAP GUI 7.10 installation over WIn Server 2003 Ent. + SP2. When I try to open new link or window with right click in IE7 this process starts but cannot display anything in new window. At the same time link is correct. Could you please help me?!

Hi
Please see n try the following notes
856741 - Link in HTMLViewer displays 'HTTP 500 Internal Server Error'
738927 - HTMLViewer: moniker protocol is disabled in WinXP SP2
If not able to solve, then please install the latest version of SAPGui 7.10 patch 8.

Extraction issue after sap note

Similar Messages

Maybe you are looking for