Extraction Issue

Hi All
I have activated the HR Cube - 0PAPD_C02 ( Appraisal) . All the master data was loaded.
For the relevant datasource 0HR_PA_PD_2 in RSA3 - 358 records were selected. Yet when the infopackage was scheduled no data was loaded ? error message was:
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Can anyone please suggest what is missing.Is there any setting in R/3 for HR that I have missed??
Regards
JP

Hi JP,
Please go to the link
http://help.sap.com/saphelp_nw04/helpdata/en/1e/c4bc39858ba523e10000000a114084/frameset.htm
Can u check whether all the base tables listed here contain data or not.
Regards,
Prakash B

Similar Messages

Lightroom 4 upgrade extracting issues

Hello,
Recently purchased Lightroom 4 upgrade (download version). Currently using Lightroom 3.6 64bit.
Downloaded successfully, but when tried to extract got this message:
A. Checked to make sure, but I am logged in as Administrator
B. Checked the write permissions for the destination folder (Desktop) and write permission is allowed.
C. I have >30GB available on my SSD HD. I can't imagine it needs more space.
Thoughts? What should i try next.
Thanks for your time.

Thanks for the quick response.
Looked at the Temp folder and all folders appear to have write permissions enabled.
Also only using MSE which I turned off and double checked to make sure Adaware wasn't running in the backround. No help. Still the same extracting issue.
I am not sure about the SSD. I think it is rooted properly? Picture attached.

Extract ' Issued to ' from x509 certificate - Is it possible

HI All,
Can anyone tell me how can I extract 'Issued to' from X509 Certificate.
I know the Issued by i.e. getIssuerDN().getName(). Please let me is it possibel to extract Issued to Information...
Best Regards
San

You can use getSubjectDN() .getName() or getSubjectX500Principal().getName()
If you need more information, please drop me an email [email protected]

Inventory Extraction Issue

Hi Gurus,
I have couple of questions here regarding Inventory extraction, and I will ask one by one:
1. I have a requirement to develop a report called " Stock Ledger Report " where the KPI's would be Quantity, Cost & Retail Price. The 2 KPI's Quantity & Costs are straightforward and the data for these come from MSEG-MENGE & MSEG-MENGE respectively. Retail Price is a bit complex since it is dependent on time and my client being a retail one their prices are subjected to change according to time. This is being calculated from different tables in the R/3 side so it's pretty clear that I have to add a custom field to my extractor.
Now my Question is, to which data source should I add the custom field, will it be 2lis_03_bx or 2lis_03_bf?
2. I started the extraction sometime back for 2lis_03_bx since that has to be extracted first, but I am getting a runtime error that says:
Short Text
    Too many parameters specified with PERFORM.
What happened?
    In a subroutine call, there were more parameters than in the
    routine definition.
    Error in ABAP application program.
    The current ABAP program "SAPLMCB1" had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class
     'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither
    caught nor passed along using a RAISING clause, in the procedure "UPDATE_CALL"
     "(FORM)"
    Since the caller of the procedure could not have expected this exception
     to occur, the running program was terminated.
    The reason for the exception is:
    A PERFORM was used to call the routine "F0001_UPDATE" of the program
     "RMCSA278".
    This routine contains 4 formal parameters, but the current call
    contains 5 actual parameters.
    parameters.
The first thing I did was to check for the OSS notes 315880 and 353042 that have to be installed in the R/3 system to perform the data loading. I got this from the SAP White paper, How to handle Inventory scenarios in BW.
I didn't find these notes in my R/3 system here, so I searched for these nodes in market place. The first note didn't make much sense to me where as the 2nd note was about how to activate the transaction key (PROCESSKEY).
According to what was mentioned in market place, in order to work with the Inventory extractors I have to activate the determination of the PROCESS KEY. So how do I know which PROCESS KEY corresponds to my requirement ? I could see all the process keys in the Transaction key maintainence for BW in SBIW.
My Question is if these 2 OSS notes are installed. will the issues be resolved ??
Thanks,
Guru.

Hi
check this SAp note for your dump
Note 546844 - PERFORM command: Error message: 'Too many parameters'
cheers,
Swapna.G

Data Extraction issue from the data source 2LIS_08TRTLP

Hi All,
We are facing one issue in time of extraction from data source 2LIS_08TRTLP(Shipment Delivery Item Data per Stage) in BW. For some out bound delivery no. Gross weight(BRGEW) is coming zero though there is value showing in the source system(ECC) in VL03 and in LIPS table. BRGEW (Gross weight) which is directly mapped in BW infosource. There is no restriction in the extraction and 0 is coming for this field in the first layer extraction.Even in the PSA all values are zero.
We have checked those delivery , delivery is being split into batch . But not the all split delivery is
giving this problem.
With Thanks
Shatadru

Yes I have done the same means I have filled setup table for those shipment no related to that delivery no and checked in the RSA 3 and required value is coming in RSA3 a. That means there is no problem in the Extractor .But I can not pull the data now in BW as it is in Production and every day delta comes .But the in the first layer ODS there is no value for that entry which was previously loaded(Though there is no routine and any restriction).
But I have one observation in the data source that particular field is in INVERSION marked in the Source. But that particular delivery for which it is giving is not canceled or returned or rejected. PGI created for that delivery and delivery status is completed for that.

Adobe Acrobat X Pro Extracting Issue

When the download manager was trying to extract the Adobe Acrobat X Pro files to my computer folder, the following message suddenly popped out:
A problem occured while extracting some files. Check available space on your computer and the write priveleges on the destination folder.
I restarted my computer just in case and tried to download the software again yet when it reached on the extracting part, the message again popped out. I have also checked my available space from my C drive and I still have enough, 1.27 TB to be exact.
I am the only user and the admin of this computer where I'm trying to download the software so it would be unlikely that I am restricted to the destination folder. Also, I have downloaded other softwares to the same destination folder and it went successful. It is just with the Adobe Acrobat X Pro dowload where I'm having this issue.
I would greatly appreciate for your prompt response with this matter. Thank you.

is your harddrive 1tb or larger? if so, you'll need to partition that drive to use acrobat x on it.
otherwise:
uninstall acrobat X
run the cleaner, http://labs.adobe.com/downloads/acrobatcleaner.html
restart your computer
if you're using windows, right click the installation file and click "run as administrator"

Inventory Extraction - Issues till not Resolved!!

Hi Gurus,
I have couple of questions here regarding Inventory extraction, and I will ask one by one:
1. I have a requirement to develop a report called " Stock Ledger Report " where the KPI's would be Quantity, Cost & Retail Price. The 2 KPI's Quantity & Costs are straightforward and the data for these come from MSEG-MENGE & MSEG-DMBTR respectively. Retail Price is a bit complex since it is dependent on time and my client being a retail one their prices are subjected to change according to time. This is being calculated from different tables in the R/3 side so it's pretty clear that I have to add a custom field to my extractor.
Now my Question is, to which data source should I add the custom field, will it be 2lis_03_bx or 2lis_03_bf?
2. I started the extraction sometime back for 2lis_03_bx since that has to be extracted first, but I am getting a runtime error that says:
Short Text
Too many parameters specified with PERFORM.
What happened?
In a subroutine call, there were more parameters than in the
routine definition.
Error in ABAP application program.
The current ABAP program "SAPLMCB1" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class
'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither
caught nor passed along using a RAISING clause, in the procedure "UPDATE_CALL"
"(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
A PERFORM was used to call the routine "F0001_UPDATE" of the program
"RMCSA278".
This routine contains 4 formal parameters, but the current call
contains 5 actual parameters.
parameters.
The first thing I did was to check for the OSS notes 315880 and 353042 that have to be installed in the R/3 system to perform the data loading. I got this from the SAP White paper, How to handle Inventory scenarios in BW.
I didn't find these notes in my R/3 system here, so I searched for these nodes in market place. The first note didn't make much sense to me where as the 2nd note was about how to activate the transaction key (PROCESSKEY).
According to what was mentioned in market place, in order to work with the Inventory extractors I have to activate the determination of the PROCESS KEY. So how do I know which PROCESS KEY corresponds to my requirement ? I could see all the process keys in the Transaction key maintainence for BW in SBIW.
My Question is if these 2 OSS notes are installed. will the issues be resolved ??...Also is it possible to proceed and resolve the above issues without istalling the 2 OSS Notes.
Thanks,
Guru.

Hey Brian,
Sorry I mistook your reply, am stuck with too much of work buddy, working on Inventory scenarios as well as POS DM too....your answers sounds cool. I will definitely try that once am done with the issue of running the setup tables and actually I think you suggestion would definitely work in my scenario since my client s a retail client and their prices change with time.
Can you also tell answer me with regard to my 2nd question.
Thank you so much
Guru.

PDF Page Extraction issue

Hi all,
i have single pdf file with many pages, on that i cannot able to extract some pdf pages on the file, we receiving error
"There was as problem reading this document (15)"
Please help me how to find the error without using acrobat. If any error code is present in the pdf file data to get.
Please help me to solve the issue.
Regards,
JayaKrishnan

Thanks for your reply on helping this issue
Please tell the option in acrobat to validate the document on this exact error.
And also help me to find the error without opening the pdf file through acrobat.
Thanks Regards,
JayaKrishnan

ISU 0uc_sales_stats_01 Delta extraction Issue

Hi All,
we have a strange issue.
We recently went through migration/conversion during which we did a reinit of 0uc_sales_stat_01.
I have re inited it on 10th then on every day it adds up the delta records starting from 10th till that date.
on 11th it brings 10 & 11th, on 12 it brings up 10th 11th and 12th etc,.,.
When i did analysis from my end i can see table DBESTA_BWTRIG which is used for initial selection of posting date & recon keys in standard extract.
Once mass billing, Mass invoicing happens i get entries in this table.
But these entries do not go away even after the data is extracted into bw.
I can see entries in this table against 0uc_sales_stats_02. i deleted the active version of 02 DS and checked but still the entries remain same.
What is the exact behaviour of this table DBESTA_BWTRIG? how is it updated and deleted or modified?
How do i identify what is the exact reason for this delta issue?
Is there any setting where i am missing in ISU?
Thanks & Regards,
Jana

Hey Steve,
have a look on Des Gallaghers Post in 0UC_SALES_STATS_01 data missing
He describes that one has to load at first in Full-Mode. You will also find a hint on table DBWESTA_BWPROT in IS-U. There will be the records with open reconciliation key which aren't be extracted because of that.

0HR_PT_1 Extraction issue No entry in HR table T569R for 0106

hi experts,
we are implementing Time and Labour cube, and trying to extracting from ECC to BW cube (0PT_C01).
when i extract data from 0HR_PT_1 data source the PSA Request is in yellow for a long time. when i check the issue in ECC. Its giving the below issues.
No entry in HR table T569R for 0106
No entry in HR table T569R for 0105
No personal work schedule for personnel number 00013090
No personal work schedule for personnel number 00013145
No personal work schedule for personnel number 00500009
No personal work schedule for personnel number 00500026
How to rectify the above issues and the load make successful?
Regards
venuscm

Hi,
Do the below things, as per the note 696836.
By using the view V_T569R, maintain the retroactive categories
1. 05 'Earliest time data carry-over'
2. 06 'Latest time data carry-over'
which constitute the time frame, in which the system will perform an extraction. Outside this time frame, the system will neither select any data nor calculate any delta. SAP recommends that you choose a period that includes approximately the current year. You have to maintain and update this time window periodically.
Regards,
Anil Kumar Sharma. P

COPA extraction issues - Incorrect field name for selection

Dear gurus,
I've issues with my COPA extraction, hope you guys could give me some clue here, point will be rewarded if I could fine the solution.
Requirement:-
To add additional field.
Step:-
As usual 1) Delete
2) Create back with select the new field. (KEB0)
3) Do not have issues when check RSA3 from DEV, but when transport to QAS I hit this issues.
Issues:
At RSA3 , when do check hit the error, "Errors occurred during the extraction"
When check from RSA3 log here I get..
** Did try to find any solution in SCN forum, with no luck. Hope get some help here.
thank you
rgds
Edi.

Yes I did get this feedback ..
Hi Edi,
As per the standard SAP, once you have assigned characteristics and values fields to your operating concern (KEA0), you can't de-assign them. When characteristics or values fields are in assigned status, you can't delete them.
But I hope there won't be much problem of having that characteristic also. If you look at performance wise, then instead of deleting, make "not used" under profitability segment characteristics, remove from the characteristic groups etc. While doing so, please check any derivation rules written based on these, or any assessment cycles defined with these also..
Regards...
Jose
forward to my FICO ..

KSB1 data extraction issue

Hi Experts!!!
I have an issue regarding KSB1 extraction of Activities specifically. The report was not fetching the activities data in the report, whereas expenses data was appearing.
After selecting the data source of database & archive, then the report started fetching the activities data. Here my question is when the data is archived is it deleted from the main database?
How can I see when & who performed this action?

thanks for your response,
I think I have to re-phrase my question, actually KSB1 is behaving very odd in terms of activity values fetching. The data is available on the main database, other reports like COOIS showing actual activity data and KP27 is dispalying planned activity data.
But the KSB1 is not fetching the data properly, what may be reason behind it. Please help....

Extraction issue after sap note

Hi Experts.
After applying sap note 1331090 to fix a program error while running extractoru2019s, one issue was solved but another one came up.
Now when a datasource is executed it appears to run without problems, but no data is extracted, it finishes successfully with 0 records, even when there´s data to extract. This happens for all datasources generated for our planning area.
Someone ever saw this issue?
Thanks in advance,
TP

Hi,
You could have missed some other Sub notes of this main note which you have mentioned. Kindly go through the note carefully and reapply the same.Still if you face the problem then I suggest you raise the issue with SAP.
Thanks,
Harsh

HCM Extract Issue

Hi everyone,
I am new to HCM Extract and have trouble faced. So hope I can get some idea from you guys.
I created an extract with PER_EXT_SEC_PERSON_UE(root) and PER_EXT_SEC_ASSIGNMENT_UE. At first creation, I added several data elements from the two UEs.After submited and run, I can get data extracted.
However, after I added extra data elements to the extract definition, I was not able to extract the data value for those extra data elements.
I can make sure that it's not because those extra data elements are blank in the database.
Dose anyone ever encounter such tricky issue? Any advice is much appreciated!
Thanks in advance!
Judith

VDS can be installed on platforms other than windows.
Plz. check:
http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417300)ID0686307850DB01721343712534825010End?rid=/library/uuid/206cf01f-2e1d-2c10-b4a7-fb0737e5a644&overridelayout=true

Delta extraction issue

Dear all,
We are doing an delta extraction from 2LIS_01_*. Delta update is not successfull with the following error messages.
:error while transfering the data
:error occured in the source system
could anyone help to fix this issue?
Thanks,
Krishna

error message in rsmo
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
when i click on Error message in the status tab the message is
*Errors occurred while transferring data ( ).
Errors in source system*

CRM - BI Data Extraction Issue

Hi Gurus,
We have CRM 2007 and BI 7.0. We have activated all the DS and also replicated them in BW and also activated all the necessary Infocubes in and Transfer rules etc.
In CRM, the data is available in table - CRMD_ORDERADM_H (480 records), but when I check in RSA3 for the 0CRM_SRV_PROCESS_H Data Source, it displays as 0 records.
Would be of great help if someone can guide me if we missed any necessary settings or configurations that have to be performed in order to populate the data from tables to Data Sources.
Thanks & Regards.

Hi,
Check this forums:
CRM data to BW .. some issues
No data when extracting using 0CRM_SRV_PROCESS_H
Delta queue for 0CRM_SRV_PROCESS_H not populated
Hope this helps...........
Rgs,
Ravi.

Extraction Issue

Similar Messages

Maybe you are looking for