Extraction of data from ECC to 3rd Party systems

Hi All,
I want to know all the options available for extracting data from ECC to a 3rd party system (custom datawarehouse like Teradata, hyperion etc). Also, I want know if there is a best practice documentation available for extraction of data from ECC to any 3rd party system?
Thanks,
SB.

Hi SB,
Check the following link
http://expertisesapbi.blogspot.com/2010/06/how-to-transfer-data-from-sap-system-to.html
Ranganath.

Similar Messages

  • Unable to extract the data from ECC 6.0 to PSA

    Hello,
    I'm trying to extract the data from ECC 6.0 data source name as 2LIS_11_VAHDR into BI 7.0
    When i try to load Full Load into PSA , I'm getting following error message
    Error Message: "DataSource 2LIS_11_VAHDR must be activated"
    Actually the data source already active , I look at the datasource using T-code LBWE it is active.
    In BI  on datasource(2LIS_11_VAHDR) when i right click selected "Manage"  system is giving throughing below error message
    "Invalid DataStore object name /BIC/B0000043: Reason: No valid entry in table RSTS"
    If anybody faced this error message please advise what i'm doing wrong?
    Advance thanks

    ECC 6.0 side
    Delete the setup tables
    Fill the data into setup tables
    Schedule the job
    I can see the data using RSA3 (2LIS_11_VAHDR) 1000 records
    BI7.0(Service Pack 15)
    Replicate the datasource in Production in Backgroud
    Migrate Datasource 3.5 to 7.0 in Development
    I did't migrate 3.5 to 7.0 in Production it's not allowing
    When i try to schedule the InfoPakage it's giving error message "Data Source is not active"
    I'm sure this problem relate to Data Source 3.5 to 7.0 convertion problem in production. In Development there is no problem because manually i convert the datasource 3.5 to 7.0
    Thanks

  • I am extracting the data from ECC To bw .but Data Loading taking long tim

    Hi All,
                     i am extracting the data from ECC To BI Syatem..but Data Loading Taking Long time. from last   6 hoursinfopackage is running.still it is showing yellow.Manually i made the red.and delete again i applied repeat of the last delta.but same proble is coming .in the status job is showing bckground job is not finished at source system.we requested to basis.basis people killed that job.again we schedule the chain also again same problem is coming.how can i solve this issue.
    Thanks ,
    chandu

    Hi,
    There are different places to track your job. Once your job is triggered in BW, you can track your load job where exactly it is taking more time and why. Follow below steps:
    1) After InfoPackage is triggered, then take the request number and go to source system to check your extraction job status.
    You can get the job status by taking the request number from BW and go to transaction SM37 in ECC. Then give the request number with begining '' and ending ''.  Also give '*' to user name.
    Job name:  REQ_XXXXXX
    User Name: *
    Check the job status whether job is completed or cancelled or short dump. If the job is still running check in SM66 whether you can see any process. If not accordingly you got to check in ST22 or SM21 in ECC. If the job is complete, then the same in BW side now.
    2) Check the data arrived in PSA, if not check whether Transfer routines or start routines are having bad SQL or code. Similarly in update rules.
    3) Once it is through in Source system (ECC), Transfer rules , Update Rules, then the next task is updating the data might some time take more time which might be based on some parameters ( Number of parallel process to update database ). Check whether updating the database is taking more time and may be you got to check with the DBA guy also.
    At all the times you should see minimum of atleast once process running all the time in SM66 till the time your job gets complete. If not you will see a log in ST22.
    Let me know if you still have questions.
    Assigning points is the only way of saying thanks in SDN.
    Thanks,
    Kumar.

  • Extraction of Data from ECC using ABAP Stage in Datastage

    Hi
    We are required to extract the customer master data from GFIMS SAP ECC5.0 system. This extraction involves fetching of data from 5 different tables. To attain this we are using ABAP stage in DATASTAGE.
    For every run the ABAP stage of DataStage generates the ABAP program in DataStage, will place it in the SAP system and extract the data by executing the ABAP program.
    To be able to use this ABAP stage we need to integrate the DataStage with SAP system. We have to send the cofiles and data files to SAP, these files will install a RFC enabled function module and user profile components in SAP.
    They say, there is a security flaw in the function module component and this will lead to exposing of complete SAP system to outside members.
    Please advise me to do alternative Ways.
    Thanks in Advance.

    Hi
    You dont see the data source in R3? When you created the data source using Tcode RSO2 you would have put the data source under some application like SD, MM etc.
    Please check in the respective application for your data source. If still the data source is still not seen, then check whether the data source is active or not.
    Hope it helps.
    Regards
    Sadeesh

  • Creation of master data info object- data coming form a 3rd party system

    Hi All
    i need to create a master data info - object  which connects the customer and the corresponding plant..actually thios data is coming from a third party system and they have maintained 2 tables one for customer and one for the plant details and these 2 tables are connected through some common id which populates unquie id for each customer and is maintained in the plant table with the same id...now both these tables have to be merged together and to be cretaed as a single info object..can any one suggest  me as to how to proceed with it.
    Regards
    Shilpa

    Hi,
    Create a Z-InfoObject with the same format as is used in your 3rd party system for the commonid.
    Add Customer and Plant as navigational Attributes.
    Create an infosource with these three fields.
    Unload (in a CSV-file) the commonid with customer and plant from your 3rd party system.
    Load these data to BI into your newly created Z-commonid InfoObject.
    Success,
    Udo

  • HOw to connect and extract the data from MS ACCESS SOURCE(Database) system

    Hi experts ,
    I have to extract the data from MS access database system using JDBC adapter will it work if Yes HOW?

    Hi Sushma,
    how to configure sendor JDBC adapter ..
    Select adapter type is JDBC..
    Give the Transport Protocol:.JDBC 2.0 (Example)............
                Message Protocol:...JDBC...........
                IAdapter Engine : Integration Server
    Processing Parameters..
    Quality of service.....(Example)..Exactly once
    Poll Interval .... Example ..10
    Query Sql statement..Example ..select * from XXXXX
    Document Name.....
    Update Sql stetement.....
    Thanks,
    Satya
    Reward points if it id useful...

  • All VF01 Invocie from SAP to 3rd Party System

    Dear Experts,
    I am trying to send customer invoice to an external system via PI with IDoc type INVOIC02. I have done the basic setting for the output type ZRD0 to transfer the document via. EDI.
    I have created a partner profile for Logical System u2013 SYSCLNT100 (LS) in WE20 and have given the outbound parameters with the message type INVOIC.
    These are the settings for my partner profile:
    part type: LS
    msg type: INVOIC
    Outbound Options: Receiver port: A000000050 (tRFC)
    Packet size: 1
    Transfer IDOC immediately
    basic type: INVOIC02
    Message Control: Application: V3
    Msg type: ZRD0
    Process Code: SD09
    When the output is manually triggered in VF01
    Goto  Header  Output
    I manual add ZRD0,
    Partner type - LS
    Partner u2013 SYSCLNT100 & Language - EN
    The system given error message u2018Maintain EDI partner profile for SYSCLNT100u2019
    When Condition Record is maintained in VV31
    Billing type - F2
    Partner u2013 SYSCLNT100 & Medium - 6
    In Billing VF01, the Condition Record is ignored with error message ''SYSCLNT100u2019 is not an EDI partneru2019
    We are sending the Invoice to 3rd party system and not the Customer (KU); hence we would like to maintain WE20 for the Logical System. All the Invoice's generated in the system should be sent to a fixed 3rd Party system, please advice
    With Regards,
    Karthik

    Hello Max,
    Yes, the partner LS for the output type is already maintained in NACE.
    With Regards,
    Karthik

  • Extraction of data from ECC to BI

    Hi Experts,
    I am trying to follow a task assigned to load attribute data from a source sap system for a cost center.
    I have followed the following steps:
    1: Create a global transfer routine.
    2: Created a generic datasource for attributes
    2.1: In the source system, using tcode SBIW, under SAP R3 -> CO, I created a node ZBW310-10 and created a datasource for master data attributes ZGR01CC_ATTR. I am specifying view Z_BIW_CSKS(I copied BIW_CSKS to Z view) Fields for selection were also marked.
    3: Replicated generic datasource for attributes by specifying "Replicate Metadata"
    4. Created the transformation and activated.
    5. Created the Infopackage and Attribute data to PSA
    Here no records are loaded when I check the dataloading monitor. What might be the issue? All objects are activated. The view mentioned above Z_BIW_CSKS has 82 records in development client of the source system.
    Thanks,
    Abdullah Ismail

    Hi
    You dont see the data source in R3? When you created the data source using Tcode RSO2 you would have put the data source under some application like SD, MM etc.
    Please check in the respective application for your data source. If still the data source is still not seen, then check whether the data source is active or not.
    Hope it helps.
    Regards
    Sadeesh

  • Sending Data from BI to Third Party System through CIB Interface

    Hi Experts ,
    We have a requirement where we need to send data from BI to any Third Party System through CIB Interface . We do not have to use the OHD's . Please share the documents for the same .
    Regards
    Garima

    Hi,
          My problem is solved.
    Sol:  Getting wrong data from third party sytem. They are adding spaces in front of the payload and end of the payload so it was not processing. After deleting that spaces its is working fine.
            Thanks for your help.
    Thanks & Regards,
    Purshothamm

  • How to extract Taxonomy data from MDMGX transaction of CRM system

    Hi all,
    I have a requirement on product master where in i have to upload data into MDM as taxonomy table from  MDMGX transaction in CRM system. Is it possible? If yes can anyone guide me the stepwise procedure as i observed it involves the Function Modules like MDM_COMM_CAT_ATTRIBUTES_EXTR.
    Thanks in advance
    Samatha

    Yes,
    You can very well do it. You need to define parameter " Hierarchy ID" in function module for exceptional cases in MDMGX.  This hierarchy ID you can get using Transaction COMM_HIERARCHY in CRM..
    This will solve you requirement....
    Thanks and Regards,
    Shiv

  • Distribute different versions of data to 3rd party systems from SAP ERP2004

    Dear fellow SDN users
    I am working in a large retail company where we are about to implement a new store system. The new system should be implemented in phases, where each phase covers one or multiple countries. Until the implementation is complete, our old store system should still be supported.
    My problem is that we also need to support multiple versions of the systems, which is something we have never done before. Do any of you guys have any experience in how to differentiate versions of the data being sent from SAP to 3rd party systems? The scenario today is:
    SAP ECC 6.0 -> SAP PI 7.0 -> STORE SYSTEM1
    And the scenario we would like in the future:
    SAP ECC 6.0 -> SAP PI 7.0 -> STORE SYSTEM1/STORE SYSTEM2
    (Where it is possible to send several versions of data: e.g. ARTMAS ver. 1 to SYSTEM1 and ARTMAS ver. 2 to SYSTEM1 and ARTMAS ver. 1 to SYSTEM2)
    The first thing that came to my mind was to differentiate on IDOC extension and then program different routines per extension when sending the idocs, but I guess there should be an easier way.
    Any idea is greatly appreciated.
    Best regards,
    Chris

    Hi Chris
    I guess it depends on how the information you want to send to various partner systems differs, but have you considered using reduction?
    I am at a client currently where we need to send similar information to a number of systems - for example Customer information using the DEBMAS message type, is going to three seperate systems.
    To do this we defined 3 reduced messages - Tcode BD53.  This not only reduces the load placed on PI/whatever middleware system is used by eliminating unnecessary data from each message variant, but allows the message to be treated differently by PI, using different data mappings, distribution models etc.
    Hope this helps

  • Pricing conditions for the articles are getting triggered one day before the actual activation date to 3rd party systems through job WPMU.

    Hi SAP Guru´s,
    Currently we are sending the pricing, promotions & article master data delta load to 3rd party system from SAP ECC via SAP XI through IDOCS using daily scheduled batch jobs WPMU. IDOC segment - WP_PLU.
    Here the issue is the promotion & pricing data are sent to 3rd party system one day before the actual start date.
    Eg: Promotion 123456 which has start date as 15/05/2014 & ending on 30/05/2014 & was created & activated on 13/05/2014.
    This promotion 123456 is getting triggered from SAP ECC through batch job on 14/05/2014 morning & 3rd party system receives the data on 14/05/2014 & the promotion are getting activated at 3rd party system end on 14/05/2014 itself which actually gets active from 15/05/2014.
    Same in the case for Standard Pricing data which needs to be active from 31/05/2014 once the promotion 123456 ends on 30/05/2014.
    The standard pricing data gets triggered from SAP ECC on 30/05/2014 through batch job & reaching 3rd party system on 30/05/2014 & getting activate on 30/05/2014 itself.
    This creates more issues at the store end as well as affecting business.
    We checked at 3rd party system end & they replied that their system considers the updated time stamp & date to activate the prices & it does not considers the actual active from & active to date. They need the data to be sent from SAP ECC on the effective date of the pricing & promotions.
    Can any one help me how to change the pricing conditions beign triggered through batch job in SAP ECC based on the actual promotion & pricing conditons start date or is there any other process to trigger the data through the batch job on the actual promotion & pricing data activation date.
    Thanks in Advance.
    Thanks & Regards,
    P.P.Shankar

    Hello Shankar,
    Change the lead time in the POS Outbound Profile. You can't put less than 2 days there so data for today and tomorrow will be transferred which also means you need to adjust your batch timing accordingly.
    Sales and Distribution -> POS Interface -> Outbound -> Maintain Profile for POS Outbound.
    See if it helps. The best option would still be that the 3rd part system considers the activtion date.
    Kind Regards
    Kaizad

  • Error while extracting Vendor Data from R/3 system

    Hi all,
    I am trying to extract vendor data from R/3(ECC6.0) system to XI using Tcode MDM_CLNT_EXTR.
    already I have maintained partner profile for the same.
    I have given the necessary details like Creditor_extract,Target System and Distribution Mode as initial load.asusaully extraction process started and I found error in log file like"Table MASTER_IDOC_DATA is empty". Please help me if anyboday have idea about this.
    Thanks in Advance,
    Ravi.

    Hi Ravi,
    you've got to set up the message type MDMRECEIPT for the Idoc distribution from R/3 to XI. Check chapter 5.2 in the IT configuration guide available on <a href="http://service.sap.com/installmdm">MDM Documentation Center</a>. It describes the necessary steps.
    BR Michael

  • Connecting directly from ECC 6.0 to a 3rd party system with out XI ?

    Hi Guys,
    we have developed soap-soap scenarios in XI and we are sending the data from ECC 6.0 -> XI ->3rd party webbased system.
    Due to some security reasons we are looking for options of doing the same with out XI ie directly from ECC 6.0 to 3rd party system.
    can somebody explain or provide the links for doing the direct connection and also suggest the advantages and disadvantages of eliminating XI completly from the design
    any hep would be really appreciated
    Thanks,
    Srini

    HI,
    Yes, using standard Enterprise services from SAP you can communicate with 3rd party systems also,
    Even you can configure the HTTPS communication with R/3 to 3rd Party system. For this you need to install the client Certificates and have to use valid User ID and Passwords.
    http://help.sap.com/saphelp_nw04s/helpdata/en/3a/7cddde33ff05cae10000000a128c20/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/e8/1f1041a0f6f16fe10000000a1550b0/frameset.htm
    Disadvantage of communication without XI
    1. XI provides the re-usability concept. i.e. if you have just R/3 to 3rd party and tomorrow you may need to add another 3rd party or sap system to communicate, then you just re-use the existing scenario.
    But in case of direct communication is leads to point-to-point connection.
    2. R/3 can't directly support to the open Standards, either you have to use ABAP proxies or RFCs to convert it to XML format. But XI is an Centralized Integration Platform with Open Standard. In current world, Openness is important.
    3. XI has the Ability to communicate with other messaging systems/products may be JMS or any other 3rd party systems also which has the limitations with direct communication
    4. Complex processes for communication possible instead of only sending and receiving (business process management) (connect e.g. asynchronous and synchronous steps, define complex communication scenarios)
    Mapping etc possible to accomplish in Java. Platform independent Java components.
    5. XI has Java & .Net support. which is not possible with directly R/3
    Thanks
    Swarup

  • Extracting data from ECC tables in BODS

    Hello all,
    I'm trying to extract data from ECC tables. I have created a data store and imported the necessary tables(FAGLFLEXT) that i will be using.  I have used the table in a job as a source and tried to execute the job but i was only able to extract 28 records from the extractor when there are many more records present in the table and  also when i view the data in BODS i can only see 28 records.
    Plz help me in resolving this. How to extract the whole data?
    Thanks in advance.

    The table layouts can be found in the [documentation for EPMA|http://www.oracle.com/technetwork/middleware/bi-foundation/epm-data-models-11121-354684.zip] . If this doesn't work, there are other options to export hierarchies to text files. You can use life cycle management or the [EPMA File Generator|http://docs.oracle.com/cd/E17236_01/epm.1112/epma_file_gen_user/launch.html].
    Kyle Goodfriend
    http://www.in2hyperion.com
    Please make sure you assign your post as answered when an appropriate answer is provided (or helpful when applicable) so others benefit.

Maybe you are looking for