Extraction of datasource 0HR_PA_1 delivered no data

hi folks,
i have a problem with extracting data from datasource 0HR_PA_1.
I implemented the HR BI content for PA in a standard way. everthing works fine except datasource 0HR_PA_1 that means in detail that I get no data records from R/3 althrough the table PA0000 has data. The other extracted table PA0302 is empty cause of deactivating that 'feature' in R/3.
My question is: could it be, that there is a relation between the deactivating of function 'addional actions' in R/3 and my problem of 'no data' concerning datasource 0HR_PA_1?
any hints and answers are appreciated and honored
best regards
AD

no ideas
Meanwhile i found out, that if table PA0302 is empty, this kind of extraction of actions will not work, even the table PA0000 is filled. That is suspicious from my point of view.
BR
AD

Similar Messages

Date of last extraction from DataSource 0HR_PY_PP_2 is not available

Hello all,
We are using this data source to extract data for HR in BW. We are currently on BI 7.0
When I used this datasource in BW development system it worked fine. But now I am trying to extract data using the same datasource in BW QA system and I am getting this error.
"Date of last extraction from DataSource 0HR_PY_PP_2 is not available HR_BIW_PP"
The datasource is delta supported so I am trying to init it, and thats when I am getting this error.
Has anyone seen this message before, can some give some suggestions?
Thanks in advance

Just quick check, check rsa3 if you can get any data and also it seems like it is complaining about changes in extract structure, can you compare the extract structure of the two system manually? If you have made changes to the extract structure, did you move that change in the source system? Sometimes it worth it to replicate the datasource and reactivate the transfer structure using program RSActiTran.
thanks.
Wond

Date of last extraction from DataSource 0HR_PP_REC_52 is not available

Hi ,
Iam getting another error for data source 0HR_PP_REC_52 , it follows:
Date of last extraction from DataSource 0HR_PP_REC_52 is not available HR_BIW_PP 1
Please help as iam not aware of this type of extrcator.
Thanks in advance.

Hi,
Did you delete the request under scheduler menu of your infopackage?
Scheduler->Init options from the Source system->delete the request
run Init with transfer option now. If it doesn;t help, simply replicate the datasources once and try initializing.
Regards,
Suman

XML DataSource delivers no mare data after upgrade from 7.01 to 7.31

Dear all,
we have an XML DataSource (BW DataSource with SOAP Connection) that worked fine till our upgrade from BW 7.01 to 7.31.
Now the delta infopackage is (still) succesfull but doesn't deliver any data.
In our XI system there is this error:
28.05.2014 08:01:05.399
Information
SOAP: call completed
28.05.2014 08:01:05.400
Information
The message was successfully retrieved from the send queue.
28.05.2014 08:01:05.402
Information
Executing request mapping "http://XXXXXXX/kam03/kampagne/reporting/visitorhistory/pi/CampaignVHOB2BWCampaignVHIB" (SWCV a2b526801e5111e0858eea100a375191)
28.05.2014 08:01:05.402
Information
The message status was set to DLNG.
28.05.2014 08:01:06.092
Information
Delivering to channel: SOAP_XI_RCV
28.05.2014 08:01:06.092
Information
MP: entering1
28.05.2014 08:01:06.092
Information
MP: processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
28.05.2014 08:01:06.092
Information
SOAP: request message entering the adapter with user J2EE_GUEST
28.05.2014 08:01:06.470
Fehler
SOAP: call failed: java.lang.NullPointerException: while trying to invoke the method com.sap.aii.af.sdk.xi.mo.xmb.XMBMessageHeader.getMessageId() of an object loaded from local variable messageHeader
28.05.2014 08:01:06.472
Fehler
Adapter Framework caught exception: java.lang.NullPointerException: while trying to invoke the method com.sap.aii.af.sdk.xi.mo.xmb.XMBMessageHeader.getMessageId() of an object loaded from local variable 'messageHeader'
28.05.2014 08:01:06.472
Fehler
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.NullPointerException: while trying to invoke the method com.sap.aii.af.sdk.xi.mo.xmb.XMBMessageHeader.getMessageId() of an object loaded from local variable 'messageHeader'
28.05.2014 08:01:06.472
Fehler
SOAP: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.NullPointerException: while trying to invoke the method com.sap.aii.af.sdk.xi.mo.xmb.XMBMessageHeader.getMessageId() of an object loaded from local variable messageHeader
28.05.2014 08:01:06.472
Information
SOAP: sending a delivery error ack ...
28.05.2014 08:01:06.472
Information
SOAP: sent a delivery error ack
28.05.2014 08:01:06.476
Fehler
Transmitting the message to endpoint <local> using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.NullPointerException: while trying to invoke the method com.sap.aii.af.sdk.xi.mo.xmb.XMBMessageHeader.getMessageId() of an object loaded from local variable 'messageHeader'.
28.05.2014 08:01:06.493
Information
The asynchronous message was successfully scheduled to be delivered at Wed May 28 08:06:06 CEST 2014.
28.05.2014 08:01:06.493
Information
The message status was set to WAIT.
28.05.2014 08:06:06.482
Information
The message status was set to TBDL.
28.05.2014 08:06:06.783
Information
The message was successfully retrieved from the send queue.
28.05.2014 08:06:06.783
Information
Retrying to send message. Retry: 1
Does anybody have a clue and know what's wrong?
Thanks in advance.
Best regards,
Nicole

Hi Nicole,
First of all I am afraid that I am not an expert in this area. My impression is that the HTTP destination type is created on the receiver side (i.e. BW). If that is the case, then I think t/code SM59 is the right place where you can also create other connection types than ABAP (please refer to paragraph 4.1 of the document which was mentioned in the other discussion).
However, I suggest to involve a basis/system administrator and if possible also an XI consultant to come to a solution. My gut feeling says that it's a connection problem which has to be solved in either the BW system, XI system or in both systems.
Best regards,
Sander

You do not have authorization to extract from DataSource ZZ_TD_EBAN COMPONE

Hi,
Iam facing the problem As
You do not have authorization to extract from DataSource ZZ_TD_EBAN COMPONENT.
ERROR IN SUBSTEP
ERROR IN SUBSTEP
Error reading the data of InfoProvider ZDP_VIRT..
I had created a Virtual Infoprovider. and taking the Dat source ZZ_TD_EBAN.
done the Trasf and DTP. for data source to cube. which was bulit in BI7..
i can see the flow AS Source system- datasource- virtual provider.
for virtual provider at run time it picks the data from source.
But when i rum the query on this VP iam getting error as
You do not have authorization to extract from DataSource ZZ_TD_EBAN COMPONE
even if i chek data at virtual provider level byclicking display Data..
after selecting the fields once i execute . there aso iam facing the same error. as
You do not have authorization to extract from DataSource ZZ_TD_EBAN COMPONENT.
Once i get in tthe error.. i can see the below msg.. but even though not able to solve .. i need your assistence.
You are not authorized to extract from DataSource ZZ_TD_EBAN in application component: MM .
System Response
The authorization check was performed with the following field values:
DataSource: ZZ_TD_EBAN
Application component: MM
Subobject: DATA
Activity: 03
Procedure
To be able to extract from the DataSource, you need authorization for authorization object S_RO_OSOA (authorizations SAPI-DataSource) with the field values specified above.
Procedure for System Administration
There is a role template S_RO_OSOA_TMPL (DataSource (OSOA) Display/Maintain/Extract) available that contains the authorizations to display, change and extract all DataSources.
Pls help mewith your valuable answer.

Hi ,
As given in your error message that S_RO_OSOA authorization object is missing . You need to include this auth object in the ID from which you are extracting the data using the TCODE : PFCG . You can ask the basis person to do so for you .
When you run any report on a virtual infoprovider , you need to give the authorization of the DTP & the transformations apart from your cube and datasource in PFCG so that it can display the output in the report . This setting is only necessary for virtual cubes.
You can always check the missing authorizations in tcode : SU53 .
Hope the above reply was helpful.
Kind Regards,
Ashutosh Singh

How to debug extraction a datasource in ecc starting execution in bw ?

HI gurus,
how to debug extraction a datasource in ecc starting execution in bw ?
Thanks.

Hi,
In your issue i thick data source trace in BW is not possible but RFC is the main criteria here if it is correct data will comes to the bw automatically when ever info package triggers.
If you need to check the data source data in trace mode and it is not coming properly, then we need to check from RSA3 by executing with debug mode check box option.
Still need any clarification let me know.
Thanks & Regards,
Srinu.Rapolu

FPBW: Extract Open Items with a posting date in the future

Dear all,
I'm are currently searching for possibilities to extract Open Items with a posting date in the future from SAP IS-U 4.72 into SAP BW 3.5.
Currently I'm using the Business Content extractor 0FC_OP_01 together with the mass transaction FPBW in IS-U.
The problem I'm facing is within the mass transaction FPBW. I've have set the key date at 01.11.2007, but this job already runs for 52.000 seconds on the same database select-statement.
Does anybody know a possible solution to improve the performance of the statement below? (I pasted it from the process overview)
================================
SELECT
/*+
INDEX("DFKKOP" "DFKKOP~1" "DFKKOP^1" "DFKKOP____1" "DFKKOP____1__X" "DFKKOP_1")
"BETRH" , "BETRW" , "BUDAT" , "BUKRS" , "FAEDN" , "GPART" , "GSBER" , "INKPS" , "SPART" , "VKONT" ,
"WAERS" , "MAHNV" , "ABWBL" , "APPLK" , "AUGBD" , "AUGBL" , "AUGBT" , "AUGDT" , "AUGRD" , "AUGST" ,
"AUGWA" , "BLART" , "BLDAT" , "EMGPA" , "GRKEY" , "HVORG" , "MANSP" , "MWSKZ" , "OPBEL" , "OPSTA" ,
"OPUPK" , "PERSL" , "PYMET" , "QSSHB" , "SBETW" , "SPZAH" , "STUDT" , "TVORG" , "VTREF" , "XBLNR" ,
"XMANL" , "HKONT" , "OPUPZ" , "OPUPW" , "STAKZ" , "WHGRP" , "AUGBS" , "XANZA" , "XRAGL" , "ABWTP" ,
"ASTKZ"
FROM
"DFKKOP"
WHERE
"MANDT" = :A0 AND "AUGST" = :A1 AND "GPART" BETWEEN :A2 AND :A3 AND ( "AUGDT" = :A4 OR "AUGDT" > :A5
AND ( "BUDAT" <= :A6 OR "AUGBD" <= :A7 ) OR "WHGRP" <> :A8 AND "OPUPW" = :A9 )
ORDER BY
"AUGST" , "GPART"#
=================================
I have already tried to create an index on the following fields (in the same order):
- MANDT           Client
- AUGST           Clearing status
- GPART           Business Partner Number
- AUGDT           Clearing date
- BUDAT           Posting Date in the Document
Any help would be appreciated!
Thanks in advance,
Steven Groot

Hi Marcos,
When you have created the Restricted keyfigures for Open Items, You have to add the date characteristic on which you are looking open item and add the variable there.Here you have to use a variable of type Interval and select the operator "<" the date of the Variable.If you go through, there are standard variable for keydate, which you can use directly.
Hope you got the idea
Regards
Happy Tony

I cannot Split Deliv. Date in Sale Order

Hi expert
Can anyone give some suggestions.
- Sale order is MTO and have production order that generated from sale order but production order was closed by user.
- User create new production order by tcode CO08.
Users want to change Deliv. Date in Sale Order by refer to new production order but cannot change.
I cannot edit and split Deliv. date because date of old production order and ATP check not found new split item.
regards,

Hi, Allen Qiu2010
Thanks for your suggestion, after check at shipping tab than Partial delivery per item is blank.
After change type, i can split new delivery date but it refer to the old prod.ord, which was closed.
Clould you tell me about new item which split delivery?
How to refer between new Deliv.date and prod.ord. that create by CO08?
   - first item of Deliv.date, and confirmed dty. have 40 PC (refer to old prod.ord which was closed)
     ->i checked material on MB52 don't have stock of this sale order . (sale order is make to order)
     -> prod. ord which create by CO08 unfinished process.
Sorry, if i wrong understand.
regrads,

Product Delivered Status Date should be there in Standard Search and Result screen of Service Order. Product Delivered Time should be Available in Result screen and In Result screen there should be facility to filter on basis of Time

Hi team,
Product Delivered Status Date should be there in Standard Search and Result screen of Service Order. Product Delivered Time should be Available in Result screen and In Result screen there should be facility to filter on basis of Time.
How to add this in search result screen.configuration is it possible? or any changes in development.
Compnent - BT116S_SRVO
Thanks
Kalpana

Hi Kalpana
Please reread my comment. I said to try and populate "Requested End" Date.
Make sure the date profile assigned to the transaction includes this Date Type.
If you can populate this either manually or programmatically the solution should be quite forward.
If you cannot do this, only then should you look at making any significant sort of enhancement.
Regards
Arden

Standard DataSource For Excise Related Data

Hi,
Please tell me are there available any standard DataSources for Excise Related Data like Excise Invoice Header data (Table j_1iexchdr), Excise Invoice Item details (Table j_1iexcdtl), Excise Groups (Table j_1iexgrps), Excise Part II details (Table J_1IPART2) etc.
If those are available in ECC 6.0, then please provide the information or for this I need to develop generic datasource?
Regards,
Pradip Nikam

Hi,
There is no Standard DS for Excise.
I created the Generic Dss on those tables with delta enabled in my last project. And they are running successfully.
I created 2 DSs on the same table , one with delta enabled on Created date and another one with delta enabled on Changed date ( Wherever this field is there in the base table). And used Lower limit as 1 as safty delta so that I was able to do delta loads multiple times in a day.
Regards,
Anil Kumar Sharma .P

How to extract retail datasources please describe clearely

how to extract retail datasources please describe clearely

Dear,
http://help.sap.com/saphelp_nw04/helpdata/en/39/e531c93747da4a8806612212b013b4/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8e/65f438c842cc2be10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/86/39d6386e24f90ae10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/35/e58282fe8711d3b49f006094b9301e/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/73/d26594107711d4af1e080009d2232d/content.htm
Also check in:
www.service.sap.com/bi -->>solution detail -->>Industry Portfolios -->> Sap Retail
Thanks

Event error extract in datasource 0FI_GL_4

Hi Guru's,
        please help me a serious problem.
In r/3 when Iam double cliking on my datasource I'm not able to display the datasource or change it.
the error displayed is MSG TEXT: [event with errors extract in datasource 0FI_GL_4].
I have enhanced the datasource as per 4.6 but here the version is ecc5 r/3.
even in rsa5 I'm not able see the datasource fields or change.
Regards
KM

Hi Robert,
     Event with errors Extract in DataSource 0FI_GL_4
     Message no. R8287
     Problem class very important
     Along with 0FI_GL_4 the folowing datasources are also having the same problem.0FI_GL_6,0FI_GL_7,0FI_TX_4.
    Please help us in this issue, waiting for your favourable answer.
Thanks & Regards
KL Chand

Data extraction from datasource-0CRM_SRV_PRO_PLAN

When we executed query 0CRM_FOCS_Q0002, result was not having any data.
As this query is related with infocube 0CRM_FOCS, when we checked in RSA1- the datasource related to it was 0CRM_SRV_PRO_PLAN.
When I checked in RSA3 in CRM system,this datasource showed just 1 entry.
But this blog-https://scn.sap.com/thread/289692 gave me an additional thought that something should be done to extract actual records.
Actually what should we do to get complete records from datasource 0CRM_SRV_PRO_PLAN

Hi
Talk with someone from CRM team. Did they run a service plan simulation?
The datasource delivers data that are enabled after you simulate expected service orders based on existing service plans.The data is only calculated during the simulation can be transferred to SAP BW for further analysis and strategic service planning.
hope that clarifies
Martin

What is the DataSource for 'Rebate Agreement' (Data comes KONA,KONP&KONH) ?

Hi all,
What is the DataSource name for 'Rebate Agreement', please?
This data comes KONA, KONP & KONH tables.
Thanks,
Venkat.

Hello Venkat,
you can extract it from 2LIS_13_VDKON Extraction of SD Billing Conditions
http://help.sap.com/saphelp_nw2004s/helpdata/en/17/cd5e407aa4c44ce10000000a1550b0/frameset.htm
Sarhan.

How to create generic text datasource to load text data?

met issue in generic master data load
Hi,
please see above link for detail infomation regarding the attribute data load. now the language and description column of the infoobject s_saled is empty. i need to create a generic text datasource to load data from R3 to BW. the table which i use to extract attribute data is VBAK, but i don't find any filed relate to language and description.
met issue in generic master data load
can anyone tell me how to load the text data?
thanks very much.
Eileen

hi eileen,
go to transactio rso2 in your source system ie r/3.
there u have three three fields for transaction data
attributes.
text.
choose text and proceed as u did for trancsaction data load.
thank u,
reward if helpful.

Extraction of datasource 0HR_PA_1 delivered no data

Similar Messages

Maybe you are looking for