Extraction queue is getting larger

Hello BW Experts,
The extraction queue is getting large every day. What is the solution.
Regards,
BWer

Hi,
Could you tell me under what scenario you are facing this problem?
Check the job scheduling status. Increase the frequency and pull the data into delta queue.
With Regards

Similar Messages

  • Urgent Entries for application 11 still exist in the extraction queue

    Hi All,
    In LBWE when i am trying to mainting structure its not allowing to add fields to ExtractStrucutre.
    Following is the error iam getting.
    Entries for application 11 still exist in the extraction queue ->
    I have set the Update to inactive and trying to add fields to Extract strucutre .
    Morover,
    I have already deleted setuptable entries for this application Component 11 and i checked in rsa3, no records are there.
    Regards,
    C.V.
    Message was edited by: P.C.V.

    PCV,
    Here are the steps. Make sure you do them when there is no posting going on.
    1) Using transaction SA38, execute program RMBWV311. This will send the data from the extraction queue to delta queue for application 11.
    2) Run your 2lis_11_***** info packages to bring the delta records into BW. Make sure to run these info packages twice because the delta is cleared on R/3 only if you run them twice. It is designed this way to accomodate the delta repetition functionality.
    Just to make sure, verify that you don't see any data in RSA7, LBWQ and if you use RSA3, the system should not extract any data.
    You should be able to change the extract structure now.
    Abdul

  • 2LIS_04_P_ARBPL Delta not captured from extraction queue

    I am using datasource 2LIS_04_P_ARBPL to load 0PP_C03 cube. I have setup init selections as follows
    0PRODORDER     AUFNR     Order Number     6000000000     6999999999
    0COORD_TYPE     AUART     Order Type     ZCP1
    0PLANT     WERKS     Plant     1010
    In short I have the selections for entire range of production orders for a given plant and order type.
    I have populated setup tables, did init load with data transfer, activated the update in LBWE, scheduled V3 job, no issues here.
    When we create new production orders they are available in extraction queue MCEX04, when V3 job runs it makes it to delta queue, available in RSA7, loads into BW when delta load is done.
    Ths issue is when we TECO a production order (status marked complete) to same production order which we just loaded as delta, it does makes it to extraction queue MCEX04, but when V3 job runs it is not available in delta queue, RSA7. May I please know if this is standard behavior of this extractor or I am missing something? Why the same production order is now getting filtered by V3 job?
    Any help will be appreciated.

    Hello
    I am also facing same issue.
    but in my case, I not mapped 0recordedmode with rocancel in transformation.  
    My scenario : DS(2LIS_04_P_ARBPL) ---->DSO(Stranded DSO) ---> Info Cube. DSO and Cube is Z object.
    In cube I am having 2 records: 1 is Correct and 2nd is bad(Minus or 0 values) record.
    That bad records fetch in report with Minus or 0 values not correct one.
    Please let me know if have any concern on this.
    Thanks is advance.

  • SRM Extraction Queue is filled Unnecessary -- to BI load

    HI
    We are running some data loads from SRM  to BI .
    We have a Strange Issue:
    Without triggering process chains or Infopack groups in BI side, Extraction queue’s (SMQ1 – TRFC’s ) are filled  with some entries. It will causes the SRM loads in a very slow manner.
    Question is :
    Why Extraction queues are filled in source sys - SRM without running Infopack/Process chain?
    Is there any Background program running in SRM side?
    What is the data flow behaviour in BI?
    How to resolve this Issue..
    And Mainly please let me know the reason?
    Thanks in advance..
    Cheers.
    Sri

    Hi,
    Check whether you are Using Queued Delta or not in LBWE, and if your code working fin meanes you can get the corretc dat ain Queued delta aslo.
    See the below article about the RSA7, SMQ1 etc...
    Checking the Data using Extractor Checker (RSA3) in ECC Delta Repeat Delta etc...
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/80f4c455-1dc2-2c10-f187-d264838f21b5&overridelayout=true 
    Data Flow from LBWQ/SMQ1 to RSA7 in ECC and Delta Extraction in BI
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/d-f/data%20flow%20from%20lbwq_smq1%20to%20rsa7%20in%20ecc%20and%20delta%20extraction%20in%20bi.pdf
    https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
    Thanks
    Reddy

  • How to empty extraction queue (LBWQ)

    Dear BWers,
    How do we empty the extraction queue LBWQ?
    Thanks
    Raj

    Hi,
    For emptying the data from the extraction queue, run the collector pgms. They start with R...Then pull that data through delta infopackages so that the delta queue is also empty. But one thing is make sure there are no more transactions posted on the source system during this activity otherwise you'll get data in your extractor queue again.
    Cheers,
    Kedar

  • DELTA  QUEUE&EXTRACTION QUEUE

    hi all,
    1.what is differnce b/ween delta queue &extraction queue
    2.wt's delta modes adavatages & disadvantages? where we usd these delta modes?

    Hi there, I am fine thank you.
    [you can call(write) me by my name i.e. Ashish.]
    I am sending you all links:
    1. SAP Network Blog: LOGISTIC COCKPIT DELTA MECHANISM - Episode one: V3 Update, the ‘serializer’
    <b>/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    2. SAP Network Blog: LOGISTIC COCKPIT DELTA MECHANISM - Episode two: V3 Update, when some problems can occur...
    <b>/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    3. SAP Network Blog: LOGISTIC COCKPIT DELTA MECHANISM - Episode three: the new update methods
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    <a href="/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods Network Blog: LOGISTIC COCKPIT DELTA MECHANISM - Episode three: the new update methods</a>
    Incase you are not able to find them this time also, you can do one thing, put "Roberto Negro" in search at sdn.sap.com, you surely get his weblogs on first page only. Then take all three episodes of LOGISTIC COCKPIT DELTA MECHANISM.
    Regards,
    Ashish

  • ERROR : Entries for application 13 still exist in the extraction queue -

    Hi everybody,
    While modifying extractor (LO  Cokpit) I am getting this error.. I have deleted data through t.code LBWQ & LBWG still I am getting this ERROR,
    " Entries for application 13 still exist in the extraction queue -> "
    and it is givig the Diagnosis as below
    Diagnosis
    You are not allowed to change the extract structure MC13VD0ITM forapplication 13. This is because unprocessed entries are still presentin an extraction queue of application 13 for at least one client.
    If an extraction structure is changed for which there are still openentries in an extraction queue, these entries can no longer be read andthe collective update terminates.
    Please help me out..it is urgent...
    Thanks in advance

    Hi Sunita,
    Do one things, to fix this problem, go to the BW for that info package, it seems
    its already exists..if yes..delete the initialization request from the package
    and come back to R/3  try to delete the application 13 and it will allow to make
    the changes to the struc.
    Hope it helps..
    Need further help revert..
    Assign points if useful..
    Cheers,
    Pattan.

  • Queue or Queue Table getting hanged

    Hi. I am having an interesting issue. The problem goes as below
    I have a queue table QT_PROMO_QUEUE and the associated queue Q_PROMO_QUEUE. This Queue has two agents QUEUE_AGENT1 and QUEUE_AGENT2.
    Suppose say i have enqueued one message into the this Q_PROMO_QUEUE, then if i have manually deleted(not purging) that message from the queue table QT_PROMO_QUEUE, then the queue is getting hanged. I am not able to perform any operations on the queue except enqueuing the new messages.
    I am not able to do below operations
    dequeuing the messages from the queue, stopping the queue, removing the subscribers from the queue, dropping the queue, or even purging the queue table, and dropping the queue table.
    Early replies are appreciated...Thanks in advance.

    when the Init is sucessfull in BW it initializes the DS in Delta Queue(RSA7) and if any of the documents gets posted they will come to update tables/extraction queue depends on the update mode you have selected in LO Cokpit. when you schedule the job control on LBWE - it transfer the delta records to RSA7

  • When I click on a photo it gets larger and then disappears

    When I view an album and click on a picture it gets larger for just a second and then goes away.  A triange with a is replaced where the picture should be.  Apple recenty reinstalled my OS due to problems with I-work opening slow, which is working ok now.   They got my pictures on the I-photo again.  However, I have many duplicates and they are all messed up with Events out of sort.  I don't know if I will ever get them organized again.  My concern now is why some of the pic disappear when I click on them.  Has anyone had this problem before with the pics disappearing?

    Apple messed things up
    do you still have the iPhoto library from before they "fied" things? Is so drag the bad i{hoto library to the desktop and restore the backup of the iPhoto library to the pictures folder and hopefully things will be good
    Otherwise what they did will take a lot of work and only be partially sucessful in getting yoru library back the way it was
    LN

  • Queue is getting struck for every delta change in CRM 5.0

    Hi Middleware gurus,
    The queues are getting struck with status 'READY' for each of these following scenarios:
    1. Individual new sales order upload from CRM to R/3 (CRM - SMQ1)
    2. Individual sales order delta changes upload from CRM to R/3 (CRM - SMQ1)
    3. Individual new materials donloaded into CRM from R/3 (CRM - SMQ1)
    4. Material delta change download from R/3 to CRM (CRM - SMQ2)
    5. Knowledgebase delta changes download from R/3 to CRM (CRM - SMQ2)
    I have to manually release the queue everytime, so that the changes can be uploaded. Am I missing something?
    By the way individual new sales order created in R/3 and delta changes on R/3 orders are getting replicated into CRM without any problem.
    Thanks,
    Kishore

    Hi Kishore,
    We had similar issue before. Do not use the replication scenarios X,Y or Z. You have use the scenario A which will solve your problem for sales order replication issues. Please refer to the note 705200. For rest of issues make sure in both the systems the queue scheduler is running. If not running actively then register the each queue in both the systems using SMQS and SMQR. If still the issue is not solved then let me know.
    Award points, if the issue is solved
    Cheers,
    Paul Kondaveeti

  • On my G5 mac at work, I am getting - don't know what to call it - looks like extraneous matrix type code around prompt windows and in applications. Sometimes I will get large shapes of colors, yellows, magentas, cyans. Anyone else experience this?

    On my G5 mac at work, I am getting - don't know what to call it - looks like extraneous matrix type code around prompt windows and in applications. Sometimes I will get large shapes of colors, yellows, magentas, cyans. Anyone else experience this?
    I will attach a recent screen shot of a print window I opened and the extra code is above and below the window. There are matrix type blocks of code and then lines under the window. I get this all the time and it is getting worse.
    Any help to get rid of it would be appreciated.
    Thanks
    TatteredSkull

    It's likely the Video card, or possibly heat.
    At the Apple Icon at top left>About this Mac.
    Then click on More Info>Hardware and report this upto *but not including the Serial#*...
    Hardware Overview:
    Machine Name: Power Mac G5 Quad
    Machine Model: PowerMac11,2
    CPU Type: PowerPC G5 (1.1)
    Number Of CPUs: 4
    CPU Speed: 2.5 GHz
    L2 Cache (per CPU): 1 MB
    Memory: 10 GB
    Bus Speed: 1.25 GHz
    Boot ROM Version: 5.2.7f1
    Get Temperature Monitor to see if it's heat related...
    http://www.macupdate.com/info.php/id/12381/temperature-monitor
    iStat Menus...
    http://bjango.com/mac/istatmenus/
    And/or iStat Pro...
    http://www.islayer.com/apps/istatpro/
    If you have any temps in the 70°C/160°F range, that's likely it.

  • How to get larger scanned photos in I-photo on a Mac

    Want to get larger scanned photos from scanner to I-Photo files on a Mac.

    Thanks for providing that information Fudgeface.
    Are you using the Full Feature Software and Drivers?
    HP Photosmart 6520 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks.
    Check the driver name that is installed for the printer. The Airprint driver might be installed instead of the Printer's driver. (usually defaults to Airprint)
    Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen should show the name.
    If the printer name shows Airprint, then that is the Apple drivers. Delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
    With the HP Software, once you go into Edit, you should have the option for custom sizes.
    Using the Apple Printer and Scanners software, you will also have the option for custom sizes.
    I have provided a document for how to scan with HP Software or Apple's Software and make changes.
    How to Scan: OS X v10.9.
    Let me know how you make out.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Can't figure how to get larger fonts in terminal

    I am new and very happy to say I've got Arch/XFCE/nfs working on network and soon to work on Samba but how in the wide wide world of sports can I get larger font on my terminal when in XFCE?
    Thanks in advance,
    Dave

    naperdave wrote:I am new and very happy to say I've got Arch/XFCE/nfs working on network and soon to work on Samba but how in the wide wide world of sports...
    I too have experienced the "agony of defeat" with fonts and xterm.  Here is how I use to launch my xterm:
    xterm -fa "andale:size=18" -bg black -fg white -geometry 80x25 -tn xterm-color -sl 1000
    * The key is the "size" parameter after the font (fa)mily name.  I was using True Type fonts and was using "andale" in this case.  I believe the size field should be applicable to whichever font you choose.  Alternatively, I believe you can pass the "-fs" option to xterm to accomplish the same thing as ":size".
    For example,
    xterm -fa "andale" -fs "18"
    will accomplish the same text size as in the first example.  Just try different font size (fs) values, and see which values will actually scale for that font.
    One caveat, I believe the "fa" option for xterm is limited to the freetype library fonts.

  • How to get larger images in albums?

    I just realized that when you click on a thumbnail in one of my albums, the larger image is actually smaller than the original photo! All the photos I've put into my web albums have been shrunk to fit into the album display area. For instance, a photo that normally displays about 7 inches high when I view in Preview, comes out about 4.5 inches tall when displayed in my web album.
    How can I get it to display photos at actual size?

    Ray Dunakin wrote:
    I tried turning off "optimize images", but they still were showing up at the reduced size.
    providing a url to your site so people could have a look at what's going on may help...
    What I'd really like is a way to designated specific images to display at a larger size -- most don't need to be very large, but some do.
    I think that's not possible in iWeb PhotoPages... As you choose one format for all. However to get larger images in albums click on a photo and a window will popup called "Photo grid". You can increase the size of the images displaying by reducing the spacing and/or decreasing the number of columns.
    Regards,
    Cédric

  • Why is the map not displaying correctly on "find my phone"  I am getting large grid squares on the map

    why is the map not displaying correctly on "find my phone"  on my computer.  I am getting large grid squares on the map.  I have tried deleting my history, tried zooming in & out, but the grid squares won't go away..

    Welcome to Apple Support Communities
    It means that it is not connected to the Internet, so it may be turned off. Another option would be that somebody has resetted it to default settings and has changed the Apple ID, being impossible to track your son's iPhone. Anyway, report it to the police because it is the only thing you can do at the moment

Maybe you are looking for