Extraction Status in Service Process CRM to BW

Hi,
I need extract the field status of one Service Process in CRM to BW with the extractor 0CRM_SRV_PROCESS_H because the status of the one service process is changing frecuently and I need to make a query for time in different status for service process. With this extractor I obtein several status but I don't know their source i.e. 0STAONESYS3, 0STAONESYS8, 0STALOCSYS0 ...
In spro transaction of CRM, we have maked several status profil and I want to extract a profil Z status....
Somebody can I help me?
Thanks in advanced
Csr

Hi Cesar,
If you are trying to get the time at which the status has been set, you will have to access the tables CRM_JCDS (CRM status change document) CRM_JEST; TJ30 to get the status. You will have to use the status profile that has been assigned in the SPRO and using that, try to read the status key from TJ30.
Read the CRM_JEST table to get the date/time when the status was set and CRM_JCDS to check the status change. Once you have these, you will have to enhance the "Transactional datasource 0CRM_SRV_PROCESS_H" to add the field to the status. The other datasources 0STATONE... are for the system statuses and not quite helpful for the USER Statuses.
Regards,
Doniv

Similar Messages

Service entry sheet reversal document (Status: Error in process) List repor

Hi,
I have a requirement, to have or develop report which gives service entry sheet reversal documents (Status: Error in process),
while investigation i found below options (not exactly meeting my requirement)
1) Display and Process Confirmations Centrally >Document Category>reverse documents
which giving all reversed document list (need only error list) and it is giving only my puchasign group list (need all purchasing group list)
2) I can execute PPB_PD with BUS2203>status>I1019
is there any way/possible option that i can execute a report of reversal service entry sheets which ststus :error in process"
Thanks,
Jai

Hi Christian,
Thanks for your reply.
But this is what has happened. No the SES was not deleted in ECC before the confirmation was deleted in SRM. Our users don't have access to ECC T-codes.
Also I have checked the time at which the cancellation was created and everything is in sync.
How can i change the status of SES from 'Error in process' to 'posted in backend'?
Please advise
Thanks

Service Request disappears from the list of My Service Requests after changing status to In process

Service Request disappears from the list of My Service Requests after changing status to In process
Incident manager (resp.) > Agent Dashboard

Hi,
As far as I know, this is a new feedback, Please vote this customer voice, here is the link:
http://feedback.azure.com/forums/216926-service-bus/suggestions/6062851-batching-in-rest-api, or create a new voice at azure feedback forum:
http://feedback.azure.com/forums/34192--general-feedback
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Faxing adobe pdf forms using actions in CRM service process

Hi experts,
Does anybody has experience in sending adobe PDF forms as a fax using actions in CRM service processes? Currently I use this by implementing a PPF BAdI, but what else configuration, software and hardware requirements I need to make faxing work in CRM?
Is it possible to use 3rd party software to send the fax for example winfax and transfer the fax number to this?
Regards:
Gabor

Dear Dezso,
As far as I remember, we already know each other
Our company have been using winfax in the past for sending fax messages. Now that they will use SAP-CRM shall they buy a new fax server? I have looked after Topcall, it might be useful with RFC?
In CRM service order, I use the EXEC_METHODCALL_PPF BAdI implementation to collect the data from the service order, and then use the standard function modules to "print" or "fax" the PDF document (call function FM_NAME).
At this function module, which structure do I neet to enter the recipient's fax number (I read somewhere that I have to use DEVICE='TELEFAX' in the output_options - is it true?) ?
Or should I communicate from the BAdI with Business Communication Services (create recipient and similar methods)?
Is there any way to send the fax from the local machine where the user uses the SAP GUI?
Thank you very much in advance for your help and support!
Gabor

Error: Service process cannot be confirmed due to its status

Hi Experts,
we want to create a Service Notification (BUS2000117) as a follow-up document of a service order (BUS2000116). The problem is that we receive the following error:
Service process cannot be confirmed due to its status
*Diagnosis*
You cannot enter a confirmation for the service process due to its status.
*System Response*
To enable you to enter a confirmation for a service process, it must be released and may not yet have the status Closed .
*Procedure*
Check the service process status and if necessary, change it.
How can i shut off the control of the status as we need to create service confirmation of service orders which are still in process. Is there any customizing?
Best Regards
Oliver

To solve the problem without using the note it is possible to change customizing.
Customer Relationship Management -> Transactions -> Status Management -> Define Status Profile for User Status:
In Transaction Control is has to be assigned the Business Transaction 'To be distributed' to the relevant status.
Afterwards the service notification can be created without problems.

CRM 5.0 - service process monitor

Hello,
We are on CRM 5.0 i have a simple issue of getting the Sales Org and Service org Descriptions in the service Monitor display.
Path
SAP easy access >SAp menu>Service-->CRM_SRV_REPORT - Service Process Monitor
This report display should also have the sales/service Org descritptions so that the identification becomes easier as identifying on the basis of numbers is difficult
Can someone Help ?
Regards
Raj

Try using CRM_ORDER_SAVE, if it helps!!
Thanks
Piyush

Deatils of CRM service/process

Microsoft.Crm.Application.Hoster.exe
CrmAsyncService.exe
Microsoft.Crm.Sandbox.WorkerProcess.exe
Till now i able to find out the above service/process running in CRM server which realted to MsCrm.
Are there any more service/process running?
Which are they?
And what actually these services are doing in server, there work(instead of debugging helper)?

A CRM installation has several services/processes running. I suggest you look at the Implementation Guide for the version of CRM you are using for more details of installed services.
Bear in mind, that on a single server not all CRM roles might be installed so not all processes might be present on a given server.

Restriction of user status in service order for billing due list

Dear CRM Experts,
I have configured status profile for service order as OPEN,INPROCESS and Completed and have assigned this to the service order transaction type.
Now once i save a service order without errors ,the system is automatically generating abilling document in billing due list TX:BEA_DL_01 even though the user status assigned to it is OPEN ,INPROCESS AND COMPLETED.
According to our client requirement ,a billing document has to be created in Billing due list if the User status assigned to it is COMPLETED only.
Please suggest the solution.
Bye,
Madhav

Hi Nanda,
As per your last reply, for some Service Orders you are unable to change the Status. Can you have check whether those service Orders are error free?
Sometimes, when there are errors in service orders or in 1Orders you cannot change the status from In Process or Open even when you have released certain Items.
Hope this helps.
Thanks,
Samantak.

Need a function module to read some std. fields in service process in CIC

Hi All,
Process is -
> user creating service process doc. in/from CIC (win client). SAP CRM 3.1 Version.
Under service document's interaction record there are few fields (category, priority, reason, status, result). Using FM: crm_order_read, am able to read/find category, priority & status. But am not able to read/find reason & result. Can you please help me for this which function module i need to use. Or is there any other method is there to find out.
Sunil

Hi Sunil,
You would find the reason data in ET_SERVICE_OS output parameter of CRM_ORDER_READ.
Go to ET_SERVICE_OS ->OSSET ->SUBJECT-> CODEGRUPPE, CODE, KURZTEXT, CODETEXT.
Hope this helps!
Regards,
Saumya

Please i have ordered for Bottom Case of white macbook for over 2 months now and the repair status is still processing. is dat normal

please i have ordered for Bottom Case of white macbook (late 2009)for over 2 months now and the repair status is still processing. is dat normal? i really need the bottom case asap, how can i get it

Call Apple. Contact Apple for support and service
This is a user to user forum, we don't work for Apple.

Job for httpd.service failed. See 'systemctl status httpd.service' and

Hello,
I am the problem. I change "/etc/httpd/conf/httpd.conf" to install php5 on apache.
sudo systemctl start httpd
Job for httpd.service failed. See 'systemctl status httpd.service' and 'journalctl -xn' for details.
systemctl status httpd.service
● httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since lun. 2014-08-25 12:19:31 CEST; 1min 18s ago
Process: 2208 ExecStop=/usr/bin/apachectl graceful-stop (code=exited, status=1/FAILURE)
Process: 2433 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
Main PID: 2060 (code=exited, status=0/SUCCESS)
août 25 12:19:31 creaprog apachectl[2433]: httpd: Syntax error on line 66 o...y
août 25 12:19:31 creaprog systemd[1]: httpd.service: control process exite...=1
août 25 12:19:31 creaprog systemd[1]: Failed to start Apache Web Server.
août 25 12:19:31 creaprog systemd[1]: Unit httpd.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
cat /etc/httpd/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/srv/http"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#Load php5 module
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# PHP settings
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Thanks, sorry my english is bad .
Last edited by Creaprog (2014-08-25 10:25:17)

I just noticed the exact same thing. It turns out that the httpd-ssl.conf file on my system is still the old v2.2 syntax, which means that the SSLMutex directive is still in there. This is an invalid directive after 2.2.
This is where things get interesting. At first, I simply thought I had forgotten to merge httpd-ssl.conf.pacnew after apache had been upgraded to 2.4. However, when I check my pacman.log, it appears that httpd-ssl.conf was never upgraded when apache went to 2.4 - (2.2.26-1 -> 2.4.7-1). There was never a pacnew file generated to be merged.
I took a look at the apache package via the abs and the "proper" httpd-ssl.conf is certainly in there, so why pacman never created a pacnew file is a mystery.
Anyway, to fix this: pull the httpd-ssl.conf from the apache package, either from your cache, using the abs and building it, or (I think) pacman may re-install it if you move the file to a backup location (not sure about this). Then merge your original httpd-ssl-conf with the new one.

Sale order status showing being processed

Dear Friends,
I am working in SAP ECC 6.0
My sale order Qty is 10 pcs eing processed
and delivery qty is 10 pcs - Completed
Good Issue - 10 Pcs - Completed
Invoice - 10 Pcs - Completed
In spite of carrying out full delivery sale order status is still showing being processed.
is there any configuration missing or is there any program to update the status.
Kindly advice.
Satish

Hi Ankur,
2 Doubts i have:
1)
In our case for the Item Category we have not maintained anything in Completion Rule however we have maintained Update Document Flow in Order to Delivery Copy Control.
Our Document status shows as Completed in this case as well. Hence i do not know the Significance of maintaining Completion rule in item category.
2) I have a order type which has Order Relevant Billing. The Copy Control for Order to Billing does not have any Update Document Flow Check Box. We are using a Service Material in this Order Type.
After creating the Billing we still have Order status as Being Processed.
Can you help in finding a solution to the above?
Madhukar

Unable to edit User Status in Service Order

Hi Experts,
There are several service orders with user status 'Open', whereas the system status is 'In Process'. The individual items are either set to Completed or are Released. I am unable to change the user status from 'Open', as there are no other options available in the dropdown list in edit mode. I even tried changing the status in CRMD_ORDER and was not able to do it. I checked the configuration for this and its perfectly fine. The status profile has been maintained properly.
I tried using FM CRM_STATUS_CHANGE_EXTERN and CRM_STATUS_CHANGE_EXTERN_OW for this purpose and it still did not work. Any help/tips to resolve this will be highly appreciated.
Thank you,
Nanda

Hi Nanda,
As per your last reply, for some Service Orders you are unable to change the Status. Can you have check whether those service Orders are error free?
Sometimes, when there are errors in service orders or in 1Orders you cannot change the status from In Process or Open even when you have released certain Items.
Hope this helps.
Thanks,
Samantak.

Analysis Services Processing Task - Error processing

Hi all,
I have a SSIS package containing an Analysis Services Processing Task. In case it fails, I want to insert the error messages in a table. I have create an SSIS package that fails because of dimension values that are not in the fact table. The package fails and
shows a number of errors in the debug window:
Error: 0xC1000007 at Create Cube, Analysis Services Execute DDL Task: Erreur interne : L'opération n'a pas abouti.
Warning: 0x811F0001 at Create Cube, Analysis Services Execute DDL Task: Erreurs dans le moteur de stockage OLAP :
Clé d'attribut introuvable lors du traitement de : Table : 'dbo_SSIS_DATA', Colonne : 'PRODCODE', Valeur : 'HUME'. L'attribut est 'PRODCODE'.
SSIS package "Step 2 - Create Cube.dtsx" finished: Failure.
However in the error list window there are 0 errors and 0 warnings.
So, why doesn't it show an error message in the error list when the package clearly fails. And how can I get the error messages from the log into a table? Thanks in advance.
Hugo

Error list does not reflect what is getting to be logged, it is more for package validation.
But the same errors will show up in the status, and the output window.
Furthermore, if your log is table bound (e.g. the sysssiserrorlog) and in the log config you chose to log the OnError events then these will be captured automatically.
Arthur
MyBlog
Twitter

SMS_WSUS_CONFIGURATION_MANAGER - MessageID 6600 - The request failed with HTTP status 503: Service Unavailable

Hi all,
knowning that there are already a lot of posts concerning above message, I have to write an additional one as I could not find a solution on the web yet.
Situation:
Windows Server 2008 forest including empty root and two child domains, one child domain does have SCCM SP1 (central primary site WND) installed on W2k8 x64 machine including WSUS 3.0 SP1 => everything is working fine.
Second child domain also contains a SCCM SP1 server (primary site HUN) running on W2k8 x64 and is defined as child site of central site WND => everything is working fine too - except Software Updates.
WSUS 3.0 SP1 installed on both SCCM servers by creating additional web site (not using "defautl web site") and configured ports 8530 and 8531 (SSL not used!). No proxy necessary/used. All WSUS 3.0 requirements for W2k8 are installed (IIS roles)
Error:
SMS_WSUS_CONFIGURATION_MANAGER - MessageID 6600:
SMS WSUS Configuration Manager failed to configure upstream server settings on WSUS Server "xxxx0003".
Possible cause: WSUS Server version 3.0 SP1 and above is not installed or cannot be contacted.
Solution: Verify that the WSUS Server version 3.0 SP1 or greater is installed. Verify that the IIS ports configured in SMS are same as those configured on the WSUS IIS website.
wsusutil checkhealth =>OK
downloading updates from WSUS at central site (SUSDB and WSUS folder equal in size) =>OK
wsus admin console able to connect and configuration possible => OK
IIS ports configured within SMS are equal to those configured for WSUS website
SCCM config (using Configuration Manager Console) does look correct - ConfigMgr Software Update Point role properties and Software Update Point Component properties
wcm.log does report an error: (SCCM Log files at the end.)
"The request failed with HTTP status 503: Service Unavailable"
IIS log files of both websites (default web site and WSUS Administration website) do not show any errors.
Questions:
What else should I look at? (registyr, SUSDB content,..)
What exactly does happen during the attempt to configure the upstream server by the SMS_WSUS_Configuration_Manager component? I guess a SMS process tries to contact a webservice - would it be possible to debug in more detail ?
And finally - Who does know the solution ?
wcm.log:
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
System.Net.WebException: The request failed with HTTP status 503: Service Unavailable.~~ at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)~~ at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer(String serverName, Boolean useSecureConnection, Int32 portNumber)~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String ServerName, Boolean UseSSL, Int32 PortNumber) SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
Remote configuration failed on WSUS Server. SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4468 GMTDATE=Mi Jul 16 10:49:47.758 2008 ISTR0="xxxx0003" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
Waiting for changes for 59 minutes SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
wsusctrl.log (looks fine to me - is able to connect to local WSUS !):
SMS_EXECUTIVE started SMS_WSUS_CONTROL_MANAGER as thread ID 6156 (0x180C). SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 2732 (0x0AAC)
This is a WSUS Role as WSUS registry key exists. SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Local WSUS Server Proxy settings are correctly configured as Proxy Name and Proxy Port 80 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Waiting for changes for 0 minutes SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Timed Out... SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Local WSUS Server Proxy settings are correctly configured as Proxy Name and Proxy Port 80 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
There are no unhealthy WSUS Server components on WSUS Server xxxx0003 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully checked database connection on WSUS server xxxx0003 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:02 6156 (0x180C)
Waiting for changes for 57 minutes SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:02 6156 (0x180C)
wsyncmgr.log (as a result of being not able to configure upstream server I guess):
STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4476 GMTDATE=Mi Jul 16 10:03:51.481 2008 ISTR0="" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 16.07.2008 12:03:51 4476 (0x117C)
Sync failed: WSUS server not configured. Source: CWSyncMgr:oSync SMS_WSUS_SYNC_MANAGER 16.07.2008 12:08:51 4476 (0x117C)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4476 GMTDATE=Mi Jul 16 10:08:51.636 2008 ISTR0="CWSyncMgr:oSync" ISTR1="WSUS server not configured" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 16.07.2008 12:08:51 4476 (0x117C)

I just experienced the exact same scenario. After much digging I found that csakg6so posted a fix at
Windoows-Noob
Run Internet Explorer as the SYSTEM account (psexec -s -d -i cmd.exe & C:\Program Files\Internet Explorrer\iexplore.exe)
Go to internet options
Go to conections
Go to LAN settings
Uncheck all boxes
The original post said to reboot, but that wasn't necessary for me.
After initiating a manual Software Update sync the WCM.log and WSyncMgr.log errors do not return and new updates are synchronized.

Extraction Status in Service Process CRM to BW

Similar Messages

Maybe you are looking for