Extraction time while updating the data from update rule

Hello Friends,
Can you please tell me that why it is taking more time while updating the data from update rule to data target.
I believe that it is taking 40% of total extraction time.
Is there any specific reason for it?
Prompt reply will be appreciated.
Regards,

hi,
check if you have complex transformation in that update rules, like calculation, read from other tables, etc.
take a look 'bw loading performance and analysis' doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
and bi performance tuning knowledge center
Business Intelligence Performance Tuning [original link is broken]
there e-learning for bw performance
hope this helps.

Similar Messages

Can we update the data from SSRS report to any database ?

Hi Team,
Greetings !!!!
Can we update the data from SSRS report to any database ?
Thanks,
Anand Gavle.

Nope SSRS doesnt have write back options. Its just a reporting tool
However one thing you can do is to link a webpage from SSRS report and do the changes through it
SSRS has the ability to navigate to web page through which you can capture any data inputs from users and save it to your db.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Error while loading the data from text file

Hi,
I got an error " Data Value Encountered before all Dimensions selected" while loading the data from the text file.
Can any one please suggest me the solution.

Possible Solutions
Make sure that the data source is valid.
Is a member from each dimension specified correctly in the data source or rules file?
Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
Does the data source contain extra spaces or tabs?
Has the updated outline been saved?

Error, while pushing the data from Oracle to MSSQL.

Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.

[email protected] wrote:
Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.This is an error from SQL Server being passed back to Oracle so you can see the problem.
What it is saying is that you are trying to insert (or update) data to a database view and that view contains a column that is either a constant (literal) value or is derived (a calculation, formula or string concatenation etc.).
As such, you can't insert or update data on that column because it has nowhere to go on the database table(s) that underly the view.

While deleting the data from cube..getting the following erros...

while deleting the data from cube the below error occured in develoment..any help
i have 4 requets.....2 are deltedd but no records for those...
2 are not deleted and they have some data..
please give me u r inputts pelase
Performing check and potential update for status control table
Message no. RSM1490
Diagnosis
If data is loaded into an InfoCube, or existing data is edited (aggregated/compressed/deleted/got from a DataMart), then there is a change in the potential reportability of the data , or the possibility of deleting data by request, or of aggregating or compressing.
This status of each one of these Cubes is stored in a status table, that is updated when there is any change to the status of a request in the Cube.
The system now analyzes the requests in the Cube and compares the calculated status with the status table.
If deviations from the status table arise then you are given the option of adjusting the status table.
System Response Procedure Procedure for System Administration

Hi,
Did you tried by right click on cube and delete data? are those requests are compressed or roll up?

Error encountered while collecting the data from JMS topic bus

Iam encountering a problem while collecting the data from JMS topic bus and pushing the data to BAM.On the DesignStudio window, after I click on “update” button in the plan window to run the plan I get the following exception messages:
IMessageSourceReceiver->messageReceive:
javax.naming.CommunicationException: Connection refused: connect
     at com.evermind.server.rmi.RMIClient.lookup(RMIClient.java:292)
     at
com.evermind.server.rmi.RMIClientContext.lookup(RMIClientContext.java:51)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at
iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:85)
     at
iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerS
tart(JMSMessageSourceReceiverImpl.java:1001)
     at
iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageRecei
ve(JMSMessageSourceReceiverImpl.java:326)
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
     at
java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
     at java.net.Socket.connect(Socket.java:426)
     at java.net.Socket.connect(Socket.java:376)
     at java.net.Socket.<init>(Socket.java:291)
     at java.net.Socket.<init>(Socket.java:147)
     at
com.evermind.server.rmi.RMIClientConnection.createSocket(RMIClientConnecti
on.java:682)
     at
oracle.oc4j.rmi.ClientSocketRmiTransport.createNetworkConnection(ClientSoc
ketRmiTransport.java:58)
     at
oracle.oc4j.rmi.ClientRmiTransport.connectToServer(ClientRmiTransport.java
:78)
     at
oracle.oc4j.rmi.ClientSocketRmiTransport.connectToServer(ClientSocketRmiTr
ansport.java:68)
     at
com.evermind.server.rmi.RMIClientConnection.connect(RMIClientConnection.ja
va:646)
     at
com.evermind.server.rmi.RMIClientConnection.sendLookupRequest(RMIClientCon
nection.java:190)
     at
com.evermind.server.rmi.RMIClientConnection.lookup(RMIClientConnection.jav
a:174)
     at com.evermind.server.rmi.RMIClient.lookup(RMIClient.java:283)
     ... 5 more
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3A]
Error during Message Receive operation.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3B]

The error msg says that your BAM server cannot connect to your JMS provider. Make sure your configs are all ok, in EL DesignStudio, BAMArchitect EMSdefinition, etc. You can refer to the samples and technotes and tutorials to understand these details. If you are following the steps in the technote etc. pl verify your oc4j container is running, and oc4j version and 'jndi path' is ok. Give the doc name, pg number and step where you are getting this error.

Problem while exporting the data from a report to an excel file.

Hi SAP guru's,
I have a problem while exporting the data from a report to an excel file.
The problem is that after exporting, the excel file seems to have some irrelevant characters....I am checking this using SOST transaction..
Required text (Russian):
Операции по счету
№ документа     Тип документа     № учетной записи     Дата документа     Валюта     Сумма, вкл. НДС     Срок оплаты     Описание документа
Current Text :
   ? 5 @ 0 F 8 8 ? > A G 5 B C
!   4 > : C       "" 8 ? 4 > : C      !   C G 5 B = > 9 7 0 ? 8 A 8        0 B 0 4 > : C         0 ; N B 0      ! C <       ! @ > : > ? ; 0 B K        ? 8 A 0 = 8 5 4 > : C
Can you help me making configuration settings if any?
Regards,
Avinash Raju

Hi Avinash
To download such characteres you need to adjust code page to be used during export. You can review SAP note 73606 to identify which code page is required for this language
Best regards

No data Exists error while retrieving the data from a table

Hi Everyone!
I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding this

Hi !
thanks for ur response...
I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake....

Error While Testing the Data from RWB

Hi Gurus,
While testing the data from my RWB --> Component Monitoring -->IE -->Test Message
I am getting the error as explained below:
Error while sending Message -->RWB
No header Mapping Defined -->Trace
Moreover when i was assigning Inbound Interface in the Interface Determination its shows in the popup window NOObjects Found instead of showing the Inbound interfaces.
Any help on this please
Regards
Sreeni

Hi ,
without completing your configuration how are you testing your interface??
1)you need to add your source and receiver interfaces in business service,select your business service then add your outbound interface in sender tab and add your inbound interface in receiver tab,if it is business system not required.
2) then check your interface/operation mapping done perfectly between source and target interfaces.
if you have above steps done perfectly then your interface will work.
if you still getting error search in sdn with error message you will find usefull tips..or post in sdn.
Regards,
Raj

Error while retracting the data from BW system

Dear all,
while retracting the data from BW we are getting the below dump
"Inconsistent entry in table TKA07 (Plan Version Maintenance)",Request you to please help to solve the issue
Thanks,
Jyoti

Jyoti,
Could you please explain in detail, were you using any standard retractor or custom?
is it erroring out in ECC system or BI?

Facing a Problem while downloading the data from ALV Grid to Excel Sheet

Hi Friends,
Iam facing a problem while downloading the data from ALV Grid to excel sheet. This is working fine in Development server , when comes to Quality and Production servers I have this trouble.
   I have nearly 11 fields in ALV Grid and out of which one is PO number of length 10 , all the ten numbers are visible in the excel sheet if we download it from development server but when we download it from Quality or Production it is showing only 9 numbers.
Can any one help me out in this case.

hi...
if this problems happens dont display the same internal as u finally got.
just create new internal table without calling any standard data elements and domains... but the new internal table s similar like ur final internal table and move all the values to new int table.
for eg.
ur final internal int table for disp,
     data : begin of itab occur 0,
                    matnr like mara-matnr,
               end of itab.
create new like this,
           data : begin of itab occur 0,
                    matnr(12) type N,
               end of itab.

Main VI is not updating the data from subVI

Dear all,
I
have a Vi A using the data front a subVi B. When I run it, I see the
data is updating in the subVI, but not the main Vi and the Front Panel.
The subVi has three output channels and the main Vi tries to display
those three channel data on the Front Panel.
Could somebody tell me how I can solve the problem?
Thanks a lot.
Roy
Solved!
Go to Solution.

You could probably use Control Refnums but as Dennis mentioned, be sure to explain the use case to us.
How Can I Update the Changes Made to a Control/Indicator from a SubVI on the main VI?
Message Edited by Adnan Z on 06-02-2009 02:48 PM
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

Error while loading the data from ODS to InfoCube

hai
Im trying to load the data from ODS to InfoCube for particular year .
But it says that there is a source system problem .
why it is like that .
pls tell me
i ll assing the points
rizwan

Hi Rizwan,
you didn't mention the error message in details. there could be a few places to be checked:
- check if BW itself source system is active and in tact and reactivate if necessary
- check if update rule is active and reactivate if necessary
- check if ODS is active and reactivate if necessary
Regards,
Lilly

Extraction time while updating the data from update rule

Similar Messages

Maybe you are looking for