Extraction to Edit in Audition from Premier Pro is messed up!!!

So evidently, Right clicking the clip the premier pro time line and editing in audition screws up the extraction process creating a tiny file that does nothing.
My work around for my solution I figured out myself is to do this:
Right click the audio file in the media browser and open into audition from premier pro. The extracted file I then edited in audition and then had to drag the extracted file from media browser in premier pro to the timeline sequence.
BTW, Adobe Phone Support is complete crap. I seemingly got hung up on after a long time of silence and being asked to hold on as he appears to look into my situation.
I can make it work but it doesn't work the way Adobe intended I presume.
Pretty irritating. Any help is appreciated. Thank you in advance! !

How big is the audio file?  Premiere cannot extract audio greater than 4gb.  It is limited to old WAV file extraction.  It doesn't support import of WAV larger than 4gb either.
TIPS:
1.  If you have big audio in timeline, use blade to clip it up, and then select all clips and edit in audition.
2.  In Audition, if you have a large WAV stereo file, split it up to mono channels.  If it is still too big, export it to MOV or AVI with Linear PCM data (same data, just a different file wrapper) and it will not matter how big the file is.  You can import that to Premiere just fine.
3.  If you are working with 5.1 audio, always EXPORT to a MOV or AVI file in linear PCM.  You will retain 5.1 track data, and it will import as a single track in Premiere that you can adjust in audition where needed, or use a mixer in premiere to get it right.
4.  If your audio is stereo and 1-3 hours, 48k16bit will be huge and 96k at 16bit will kill the WAV file limit at 1.5 hours.  Separate the channels and you should be okay.  With 5.1 of the same length, you might also get away with the same channel separation.  Beyond that, you'll need a different file container.  If you still wish to separate audio, do so, it won't hurt anything.

Similar Messages

  • How do I Import footage from Premier Pro CS3 to After Effects?

    Hi
    As the subject says, how do I import footage from premier pro cs3 into after effects. I'm getting rather frustrated trying to figure this out.
    Via copy & paste I can copy into after effects but this copys the whole of the track on the timeline, where as I just want 10 seconds copied. The 10 seconds I want to copy is a segment & was highlighted when I clicked copy.
    Also when the full track gets copied, all my edits aren't copied & I get the raw track copied???
    I've googled this, tried the "Add Dynamic Link" but all I want is to copy 10 seconds of footage from premier into after effects, add my effect & then copy it back, and I can't figure out how to do this simple thing
    Any help
    Thanks.

    I am still not getting this.
    I highlight the selection I want to copy into after effects. I copy & paste it & it pastes my entire footage without any off the edits I have made.
    Having searched loads for this I can find no other answer than copy & paste.
    Please please could you guy be more specific with your answers as I just can't figure this one?

  • Edit in Audition from After Effects: I need Help!

    I’ve been using CS5 for more than one year and I installed CS5.5 on my PC Windows 7 professional few days ago so now I have both CS5 and CS 5.5 on the same PC.  Unfortunately I don't succeed in editing the following audio files in Audition from AE (on the contrary I can do it in Audition from Premiere Pro) because it says ”file not supported by any plug-in currently registered” (see the snapshot attached). The files are:  *.m2ts audio 5.1 from videocamera Sony and  *.FLV
    NB. I can edit these same files (with the  guide of the video track too) in Soundbooth from AE CS5 and CS5.5 What can I do? Would you mind giving me some advises please? I apologize for the quality of my English. Thanks in advance. gragabo from Italy

    Your file looks to be an MPEG-2 Transport Stream (from the m2ts file extension).  This isn't natively supported in Audition CS5.5.   You'll want to convert to a different format first.
    AE and Audition use different file importers, whereas Soundbooth used the same as Pr and AE.
    Format support in Audition should be improved in a future release.

  • DirectLink from Premier Pro CC 2014 to Encore - no longer there

    Trying to get a Premier Pro CC 2014 sequence into Encore CS6 - and it won't happen.
    The DirectLink from Premier Pro CC 2014 to Encore - is no longer there and I've tried simply dragging the required sequences over from the PP CC window into the timeline bin in Encore - it won't do it.
    I've tried importing sequences and after clicking on the project to open and select the sequences from it just sits there with a portion of yellow progress bar about 5mm long - doesn't move on.
    I am now trying to build the DVD project by putting all materials on one sequence, with chapter markers on it and pushing out a media encoder file in H.264 first. Maybe this will import to Encore.
    Hating the fact these two sister programs no longer talk or work together - losing Encore is a major headache.

    Thanks Stan,
    Interesting you say "Dynamic link only works between like versions. So the only DL for Premiere with Encore CS6 is Premiere CS6" and then show me a video where the guy's first screen pops up with "Using Premiere Pro CC & Encore CS6".
    This is the latterday workaround to cover the issue of the removal of the directlink from PP CC 2014 to Encore - which does cover my issue - however I find it strange that Adobe choose to make great play of the DirectLink facility - now employed between programs such as PP CC 2014 and SpeedGrade - yet have deliberately destroyed a great working relationship in the same manner between PP CC 2014 and Encore.
    I find this "dictatorial" deduction a real nause...

  • I need Encore CS6 and it is not available on Creative Cloud.  Neither is Premier Pro CS6 which supposedly installs Encore CS6.  I need to burn a DVD from my mpeg4 output from Premier Pro CC2014.  What should I do?

    I need Encore CS6 and it is not available on Creative Cloud.  Neither is Premier Pro CS6 which supposedly installs Encore CS6.  I need to burn a DVD from my mpeg4 output from Premier Pro CC2014.  What should I do?

    You should probably post your question about burning a DVD from Premiere Pro in the Premiere Pro forum
    Here is a link to info regrding getting CS6 applicarions thru the Cloud with a full subscription...
    Get CS6 Apps from Cloud Subscription:
    Download previous versions of Adobe Creative applications -
    http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html

  • Premier Pro 2014 opens Audition CS6 when editing audio clip from Premier

    I own Adobe CS6 Master Collection installed (for legacy projects) and I also have the CC subscription. When I am running Premier Pro CC 2014 and then try to edit an audio clip in Audition the CS6 version of Audition loads rather than the CC 2014 version. Any help or thoughts on why this is happening would be appreciated.
    KR

    I detected this with photoshop--I think its an OS issue--The OS doesn't appear to recognize the two versions are different.  In my case, I had PSP CC loaded, but then loaded the 32 bit version of PSP CS6 (so I could scan directly into the program using "IMPORT")  Windows changed the default to the 32 bit version.  When I tried to change default using windows, windows would not show the CC version as an option--just the 32 bit version.  Without editing the registry, I couldn't find a way to force windows to ignore the 32 bit version and open the CC version.  My workaround was to always open the CC version from the icon and then click on the file I wanted open.  It appears that if any version of the program is already running, the recognized default won't open.  This might work for you on Audition.

  • Can I re-conforma a timeline from Premier pro  to Audition?

    Hi,
    Tha'st the question can I update a seq from ppro cs6 to a older seq in Audition. have add new clips and audio and wish not to redo it all.
    Thanks.
    trevor

    I have a seq in Premier Pro where I have once before taken it to Audition and done a lot of work (suck)
    Now I have had to make some changes and would like to take the new seq in PP back to Audition and just work with the new added audio clips and timing.
    Back in the day of Fcp and sound track you could do this, so I am hoping one can do it here it was called re-conforming.
    but I can't find any thing on the web which say you can or not.
    Hope that helps

  • Can't export clips or sequences to Audition from Premiere Pro cc 2014.2

    I can't get audio tracks or anything to export to audition. If I right click on them the option is grayed out and if I go to the clip menu and select "edit in adobe audition" the "clip" is grayed out and if I choose sequence it opens a dialog box that will not let me click the box "open in adobe audition".
    I am watching a how to video but my program will not function as shown in video.

    I uninstalled Audition and reinstalled it. I read that it should be installed after premier pro cc. That restored the grayed out links. good, but now other problem.
    Now the new issue is the export to premiere from Audition is greyed out.
    I will try and get this make sense...
    I installed premiere cs6 two days ago to get Encore for dvd burning and menus. After the uninstall/reinstall of audition just now I ran a check on the link and got stuff from premiere cc 2014 to launch into audition, but when I checked how to send it back to premiere pro cc 2014 when I went to export to premiere (and was able to check the open in Premiere box) it launched cs6, but I want it to go to my premiere cc 2014
    So I uninstalled cs6 only leaving encore, now the box to send it to premiere is unable to be checked.
    I tried another fresh install of audition, but the box is still unable to be checked.
    I need help - been up all night and having a rough time here.

  • Question about Dynamic Linking from Premier Pro

    I have a number of sequences created in Premier Pro CS5.5 that I have linked into a project in Encore CS 5.1 via the "Dynamic Link" feature. My question is - if I make any adjustments or changes to those sequences in Premier Pro, will those changes be automatically transferred to the corresponding timelines in Encore? If not, how do I make that happen?

    Jeff's answer applies to each dynamic linked sequence you transcoded after in Encore. For any sequence not already transcoded, changes will be automatic.
    The exception is markers. If you change markers, including markers that shifted on the Premiere timeline because you deleted or added clips, changed duration, etc, you must select the sequence's timeline and select Edit -> Update Markers From Source (replaces all markers).

  • I've Got The HDV Capture BLUES From Premier Pro CS6

    I am attempting to capture HDV footage from my Sony Z1U camera in Premier Pro CS6.  When I do so, the file type saved in my designated location is an MP3 file, which I know is not correct.  The captured footage never gets into the program, it just remains on the disk as an MP3 file type.  Then when I try to Import that file into Premier Pro from the disk, I get an error message saying "There Was An Error Decompressing Audio or Video"  Does anybody know why a captured HDV file would wind up on the disk with an MP3 type name?
    Thx.

    You scared me a bit. I upgraded from Premiere Pro CS3 to Premiere Pro CS6 and I haven't had a need to capture anything yet. So, while I do like using HDVSplit, I thought I would try capturing from my Sony HDR-FX1 just to see what happens.
    I turned off the PC, got out the camera, connected the Firewire cable (I blew the firewire port on this camera once. I will NOT do it again.)
    I started a new project. Now, the first thing I noticed was that the default is to capture DV. So I changed that to HDV.  See the image below:
    After that, it was a simple matter to capture the HDV. I dropped it on the "New Item" button to create a new sequence with the exact right properties. Then I trimmed it a little on each end. It was so cool that there was no line above the clip, meaning that no rendering was required. It never used to be so easy. I then used the Vimeo 1080 60p preset and uploaded it to Vimeo. No video or audio effects. This is how it was recorded.
    So, since it worked for me, let's see if we can get enough details from the people having trouble and see if it is user error or a bug I didn't see.
    Oh, just in case there are any Disney World fans, or anyone who just loves Christmas lights, here is what I captured.

  • Colour correction for H.264/YouTube export from premier pro cc, help.

    Hi, I am just finishing up a project that I put together in Premier Pro CC and SpeedGrade. I did a little test export, as it's for YouTube I used H.264. On looking at it afterwards it looked washed out with the blacks losing there depth, the saturation dropping and a loss of contrast. I tried checking on a few monitors and then tried uploading a piece to YouTube and it looks the same across the monitors and the same on YouTube this washed out drab change. So I tried reimporting the export back into Premier Pro and it looks fine in Premier Pro and SpeedGrade. I can go back and push my blacks and whites but it'll have to beyond 0 and 100 to get my contrast back and it feels wrong using the scopes like this. Dose anyone know what I might be doing wrong?

    Yes that's how I'm working. In Premier Pro CC and using the direct link to SpeedGrade then back to Premier Pro and exporting from there. I'm not sure you even can export from SG if you use the direct link from PP. I'm unsure now if it's the H.264 to blame, I tried a few other's and they also look washed out. At present I'm having to go over my old grade, that took days, adding more contrast and saturation seeing if I can get an acceptable image when I export.
    I have tried AVI uncompressed, a few flavours of H.264 including some of the pre set ones like the YouTube ones and some image sequence's. The JPEG sequence was fine, same colours and contrast as within Adobe but all the H.264 and the AVI were washed out no matter what setting I put them on.
    In the picture below you can see from the left first a waveform then the image in SpeedGrade with the scopes showing the blacks well below 0, next the same image back in PremierPro, then the exported H.246 file.
    and here are the settings.

  • Why am I not getting the audio when I send a video from Premier Pro to encor to make a DVD?

    I created a video with only one audio track.  It plays perfectly in Premier Pro
    Then I send it to encor to make a DVD.  When I play the video in the monitor in encor, there is not sound, audio track
    What am I doing wrong.  I have done this successfully many times before

    To further add to the equation if I go to System Preferences and switch my output from my MOTU Firewire to the internal speakers of my Mac Pro I can hear the clip I just dragged and couldn't hear before in the Timeline AND when I then switch back to the MOTU I can now hear that same clip I just dragged in the Timeline.  But if I drag a new clip from Events to Timeline then I cannot hear it again until I go through this same song and dance.
    Help?
    Weird... It appears that there is a problem with the audio not being routed to the right output.
    I don't have a MOTU interface, but could it be that there is an updated driver for it?
    Also, I'd try to let OnyX run its cleaning and maintenance routines.
    If all else fails, at least you can shorten the workaround: you don't need to go to system preferences to change the output for sound. Just option-click on the volume icon in the menu bar and select the desired choice.

  • I want to transfer the Video transitions from premier Pro to Premier Pro CC 2014 I like to use the old video Transitions?

    I want to transfer the Video Transitions fro premier Pro to my new project in Premier Pro CC 2014 what can I do?    My e-mail is( [email protected] )

    Hi
    How did you "transfer" Express?
    It might be better to re-install Express 9 from scratch, though without an Optical drive you would need to:
    a) Use an external Optical drive
    b) Make a disk image of the installer on another computer and then copy that image to the rMBP
    c) Make use of Apple's Remote Disk
    http://support.apple.com/kb/HT5287
    CCT

  • Encore having trouble loading my sequence from Premier Pro CC.

    I have made DVD's before with Premier Pro CC and Encore, but today it is stalling when I try to import my timeline from PPCC. It says," Import Premier Pro Sequence. Loading." It will stay on this for hours not moving. Is Something wrong with my Encore? Is something wrong with my sequence?

    You can't import a sequence from Premiere CC to Encore CS6, you have to export the video out of Premiere as a Mpeg2dvd and import the two files, one audio and one video, into Encore. Encore CS6 is the last of the Encore releases and will not directly link to any of the CC programs.

  • Can't send audioclips to audition from premiere pro

    Hi,
    i can't send audioclips to audition frome premiere, must do all by hand! Who does know a solution?@

    WEr soll da was wissen? Das ist ein völlig sinnfreier "Geht nicht!" Post ohne jegliche technische Informationen - system, Projekteinstellungen, Versionen und so weiter.
    Mylenium

Maybe you are looking for

  • Remote for ipad, cant find songs, but my iphone can, on the same network

    hi all have a very odd problem, and apple cant seem to help me, i´m using the app called remote, to control my itunes music, from both my iphones, ipod touch and the ipad, they all connect to the same itunes music library and i can control them just

  • PM Order - Change operations Work Center to Main Work Center

    Hi Experts, We have prepared a tool for client, which create Maintenance Plan and order in the background. The order created is having "Main Work Center" defined at header and "Work Center" at the operations level. In the current scenario the "Main W

  • Setting logging level

    Hello folks; Is there a way to set the logging threshold for log messages sent to the weblogic log? I see where to adjust logging threshold for the standard out, but this level doesn't seem to affect the threshold for messages getting to the physical

  • Query "Status Overview is already open in another session"

    Hi All, We implemented ESS MSS on Portal 7.01 SP8. With With SAP_ESS 603 SP7 and BP_ERP5ESS 1.41 SP9 This is for country Qatar and it has made as a copy of GB as SAP doesnt provide any country structure for Qatar. We are facing error in Performance D

  • Creating a sort of reset button for movieclips

    Hi, i've got 10 movieclips in my movie. I use them for a sort of colour sudoku game and i wanted to have a reset button which reset them all to the first frame (which is a blank colour) Anyway, my problem is that if the movieclip is already on that f