Extraction using 2LIS_47_BV

Hi All,
i tried to fill the setup tables for 2lis_47_bc data source. The datasource 2lis_47_bv is available in LBWE.
Based on sdn i did try to fill the setup tables through MEBABW tcode, but its giving the below warning.
Deactivate list output for update data
Message no. NAA605
Diagnosis
If a lot of arrangements are processed, the list output of the update data should be deactivated.
Creation of the list output in the form of a detailed statement takes much longer and uses more memory.
Procedure
Please look into this matter. Choose the list output per message log.
Appreciate your help.
Thanks,
Rejish

Hi Rejish,
Could you please check in your system in Tr. SFW5 and SFW1
whether the  Business Function LOG_MM_CI_1 and the switch MM_SFWS_SC1
are activated.
Also, refer to the following forum links:
Re: Data source : 2LIS_47_BV
Also, something from help.sap:
http://help.sap.com/saphelp_nw70/helpdata/en/28/d6a3059fc843d6ab07cc52d6c1920f/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/28/d6a3059fc843d6ab07cc52d6c1920f/content.htm
Check these prerequisites:
http://help.sap.com/saphelp_nw70/helpdata/en/28/d6a3059fc843d6ab07cc52d6c1920f/content.htm
You must activate the D version of this DataSource in the R/3 system before you can use it. Go to IS > IS-R > 2LIS_47_BV to activate this DataSource.
Try to run transaction LBWE and then set the flag to active for Application 47 in the R/3 system.
Note
The 2LIS_47_BV DataSource must already be activated in R/3 before you set the flag to active for Application 47.
I hope it helps you.
Best regards,
Fran.
Edited by: J Francisco Fernandes on Jun 21, 2011 6:40 PM

Similar Messages

  • Code For Delta Extraction Using Function Module

    Dear Experts,
    I want a sample code for Delta Extraction using Function Module ( If it is customized already working code very helpful ), I have already created Function Module but Full update is happening. If I give delta update again it is retrieving all records. It is very urgent, if you have please send me to the following mail ID.
    [email protected]
    Best Regards,
    SGK.

    Dear KJ,
    Thank for your response. I saw the code that you sent, you have used some ztables like ZSC_DELTA_IP, ZSC_SAFETY_DELTA, ZSC_SET_EXT_TIME
    What are the fields that you have created in these tables , what is use of these tables, can you send the fields that you have used in these tables.
    Thanks & Regards,
    SGK

  • IS-U enhancing transaction FPBW (open items extraction using table DFKKOPBW

    Has anybody experiances with IS-U Accounts Receivable & payable - 'Open Items' extraction using transaction FPBW
    (which fill the table DFKKOPBW).
    1. I need to fill an custom included structure in this table (DFKKOPBW) and I am searching for the correct time (for performance reasons) & place in the (SAP) source (in the program flow) to do this.
    2. Anybody any clues on Custum/user exits in this part?
    See also function group FKKOPBW.
    Jos Reithofer

    Try this code that can search a user exit in a transaction. I got it from previous post in this forum.
    *& Report  Y_SEARCH_USEREXIT                                           *
    REPORT y_search_userexit LINE-SIZE 140 NO STANDARD PAGE HEADING.
    CONSTANTS
    *CONSTANTS: c_user_exit(22) TYPE c VALUE 'CALL CUSTOMER-FUNCTION',
    constants: c_badi(30) type c value 'CALL METHOD CL_EXITHANDLER=>',
               c_funcao_1(13) TYPE c VALUE 'CALLFUNCTION''',
               c_funcao_2(13) TYPE c VALUE 'CALL FUNCTION',
               c_include(07) TYPE c VALUE 'INCLUDE',
               c_submit(06) TYPE c VALUE 'SUBMIT',
               c_comentario TYPE c VALUE '*',
               c_ponto TYPE c VALUE '.',
               c_aspa TYPE c VALUE '''',
               c_x TYPE c VALUE 'X'.
    TABELAS INTERNAS
    DATA: BEGIN OF ti_programa OCCURS 0,
    codigo_fonte(200) type c, " LIKE rssource-line,
    END OF ti_programa.
    DATA: BEGIN OF ti_includes OCCURS 0,
    nome LIKE sy-repid,
    nivel(2) TYPE n,
    END OF ti_includes.
    DATA: BEGIN OF ti_user_exit OCCURS 0,
    programa LIKE sy-repid,
    linha(10) TYPE n,
    codigo_fonte LIKE rssource-line,
    nivel(2) TYPE n,
    END OF ti_user_exit.
    VARIÁVEIS GLOBAIS
    DATA: vg_caracter TYPE c,
    vg_palavra(50) TYPE c,
    vg_inicial LIKE sy-index,
    vg_conta_aspa TYPE n,
    vg_pname LIKE tfdir-pname,
    vg_texto(50) TYPE c,
    vg_contador LIKE sy-tfill,
    vg_nivel(2) TYPE n,
    vg_ini_contagem TYPE c, " INDICA QUE DEVE SER INICIADA A CONTAGEM
    vg_conta_espaco TYPE n. " TOTAL DE ESPAÇOS ( MÁXIMO 2 )
    PARAMETERS
    *- DADOS OBRIGATÓRIOS.
    SELECTION-SCREEN BEGIN OF BLOCK bl01 WITH FRAME TITLE tl_001 .
    selection-screen begin of line.
    selection-screen comment 1(25) tl_003.
    PARAMETERS: p_prog LIKE sy-repid.
    selection-screen end of line.
    selection-screen begin of line.
    selection-screen comment 1(25) tl_004.
    parameters: p_tcode LIKE sy-tcode.
    selection-screen end of line.
    selection-screen begin of line.
    selection-screen comment 1(25) tl_009.
    parameters: p_exit(30) TYPE c default 'CALL CUSTOMER-FUNCTION'.
    selection-screen end of line.
    SELECTION-SCREEN END OF BLOCK bl01.
    *- DADOS OPCIONAIS.
    SELECTION-SCREEN BEGIN OF BLOCK bl02 WITH FRAME TITLE tl_002.
    selection-screen begin of line.
    PARAMETERS: p_incl TYPE c AS CHECKBOX.
    selection-screen comment 4(25) tl_005.
    selection-screen end of line.
    selection-screen begin of line.
    parameters: p_func TYPE c AS CHECKBOX.
    selection-screen comment 4(25) tl_006.
    selection-screen end of line.
    selection-screen begin of line.
    parameters: p_submit TYPE c AS CHECKBOX.
    selection-screen comment 4(25) tl_007.
    selection-screen end of line.
    selection-screen begin of line.
    selection-screen comment 1(25) tl_008.
    parameters: p_nivel(2) TYPE n.
    selection-screen end of line.
    SELECTION-SCREEN END OF BLOCK bl02.
    initialization.
      tl_001 = 'Program Selection'.
      tl_002 = 'Search Depth'.
      tl_003 = 'Program Name'.
      tl_004 = 'Transaction Code'.
      tl_005 = 'Process INCLUDEs'.
      tl_006 = 'Process FUNCTION MODULEs'.
      tl_007 = 'Process SUBMITs'.
      tl_008 = 'Depth level'.
      tl_009 = 'Search string'.
    INÍCIO
    START-OF-SELECTION.
    *- CONSISTÊNCIAS DOS PARÂMETROS.
      PERFORM consisti_parametros.
    *- INICIALIZA TABELA.
      PERFORM inicializa_tabela.
    *- VERIFICA SE NO PROGRAMA EXISTE ALGUM INCLUDE,FUNÇÃO OU SUBMIT.
      PERFORM verifica_include_funcao_submit.
    *- ANALISA OS INCLUDES E PROCURA POR USER EXIT.
      PERFORM procura_user_exit.
    *- EXIBE TODAS USER EXIT ENCONTRADAS.
      PERFORM exibe_user_exit.
    FIM
    END-OF-SELECTION.
    *& Form PROCURA_USER_EXIT
    text
    --> p1 text
    <-- p2 text
    FORM procura_user_exit.
    *- VERIFICA SE NOS INCLUDES SELECIONADOS EXISTEM USER EXITS.
      LOOP AT ti_includes.
    *- ESVAZIA TABELA INTERNA.
        REFRESH ti_programa.
    *- REALIZA LEITURA DO INCLUDE ARMAZENANDO-O EM TABELA INTERNA
        READ REPORT ti_includes-nome INTO ti_programa.
        LOOP AT ti_programa.
    *- VERIFICA SE NA LINHA DO PROGRAMA EXISTE ALGUM INCLUDE.
          SEARCH ti_programa-codigo_fonte FOR p_exit.
    *- SE ENCONTROU INCLUDE E SE A LINHA NÃO ESTÁ COMENTADA...
          IF sy-subrc EQ 0
          AND ti_programa-codigo_fonte+0(1) NE c_comentario.
            CLEAR ti_user_exit.
    *- REMOVE ESPAÇOS NO INÍCIO DA STRING.
            SHIFT ti_programa-codigo_fonte LEFT DELETING LEADING space.
            MOVE: ti_includes-nome TO ti_user_exit-programa,
            sy-tabix TO ti_user_exit-linha,
            ti_programa-codigo_fonte TO ti_user_exit-codigo_fonte,
            ti_includes-nivel TO ti_user_exit-nivel.
            APPEND ti_user_exit.
          ENDIF.
        ENDLOOP.
      ENDLOOP.
    ENDFORM. " PROCURA_USER_EXIT
    *& Form EXIBE_USER_EXIT
    text
    --> p1 text
    <-- p2 text
    FORM exibe_user_exit.
      PERFORM cabecalho.
      PERFORM user_exit_nao_encontrada.
      PERFORM lista_user_exit_encontrada.
      PERFORM rodape.
    ENDFORM. " EXIBE_USER_EXIT
    *& Form PROCURA_INCLUDE
    text
    --> p1 text
    <-- p2 text
    FORM procura_include.
      CLEAR vg_palavra.
    *- VERIFICA SE NA LINHA DO PROGRAMA EXISTE ALGUM INCLUDE.
      SEARCH ti_programa-codigo_fonte FOR c_include.
    *- SE ENCONTROU INCLUDE E SE A LINHA NÃO ESTÁ COMENTADA...
      IF sy-subrc EQ 0
      AND ti_programa-codigo_fonte+0(1) NE c_comentario.
    *- VERIFICA TODOS OS 72
        DO 72 TIMES.
          vg_inicial = sy-index - 1.
          MOVE ti_programa-codigo_fonte+vg_inicial(1) TO vg_caracter.
          IF NOT vg_caracter IS INITIAL.
    *- VERIFICA SE NÃO É FIM DO COMANDO.
            IF vg_caracter EQ c_ponto.
              EXIT.
            ENDIF.
    *- MONTA PALAVRA.
            CONCATENATE vg_palavra vg_caracter INTO vg_palavra.
    *- CONVERTE PARA MAÍUSCULA PARA FUTURA COMPARAÇÃO.
            TRANSLATE vg_palavra TO UPPER CASE.
    *- SE ENCONTROU ALGUM INCLUDE
            IF vg_palavra EQ c_include.
              CLEAR vg_palavra.
            ENDIF.
          ENDIF.
        ENDDO.
    *- SALVA NOME DO INCLUDE P
        READ TABLE ti_includes WITH KEY nome = vg_palavra.
        IF NOT sy-subrc IS INITIAL.
          IF vg_nivel LE p_nivel.
            MOVE: vg_palavra TO ti_includes-nome,
            vg_nivel TO ti_includes-nivel.
            APPEND ti_includes.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDFORM. " PROCURA_INCLUDE
    *& Form PROCURA_FUNCAO
    text
    --> p1 text
    <-- p2 text
    FORM procura_funcao.
      CLEAR: vg_conta_aspa,
      vg_palavra.
    *- VERIFICA SE NA LINHA DO PROGRAMA EXISTE ALGUM INCLUDE.
      SEARCH ti_programa-codigo_fonte FOR c_funcao_2.
    *- SE ENCONTROU INCLUDE E SE A LINHA NÃO ESTÁ COMENTADA...
      IF sy-subrc EQ 0
      AND ti_programa-codigo_fonte+0(1) NE c_comentario.
    *- VERIFICA TODOS OS 72
        DO 72 TIMES.
          vg_inicial = sy-index - 1.
          MOVE ti_programa-codigo_fonte+vg_inicial(1)
          TO vg_caracter.
          IF NOT vg_caracter IS INITIAL.
    *- VERIFICA SE NÃO É FIM DO COMANDO.
            IF vg_caracter EQ c_aspa.
              ADD 1 TO vg_conta_aspa.
              IF vg_conta_aspa EQ 2.
                EXIT.
              ENDIF.
            ENDIF.
    *- MONTA PALAVRA.
            CONCATENATE vg_palavra vg_caracter INTO vg_palavra.
    *- CONVERTE PARA MAÍUSCULA PARA FUTURA COMPARAÇÃO.
            TRANSLATE vg_palavra TO UPPER CASE.
    *- SE ENCONTROU ALGUM INCLUDE
            IF vg_palavra EQ c_funcao_1.
              CLEAR vg_palavra.
            ENDIF.
          ENDIF.
        ENDDO.
    *- PESQUISA NOME DA FUNÇÃO PARA FUTURA PESQUISA POR USER EXIT.
        CLEAR vg_pname.
        SELECT SINGLE pname
        INTO vg_pname
        FROM tfdir
        WHERE funcname EQ vg_palavra.
        IF sy-subrc EQ 0.
          READ TABLE ti_includes WITH KEY nome = vg_pname.
          IF NOT sy-subrc IS INITIAL.
            IF vg_nivel LE p_nivel.
              MOVE: vg_pname TO ti_includes-nome,
              vg_nivel TO ti_includes-nivel.
              APPEND ti_includes.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDFORM. " PROCURA_FUNCAO
    *& Form VERIFICA_INCLUDE_FUNCAO_SUBMIT
    text
    --> p1 text
    <-- p2 text
    FORM verifica_include_funcao_submit.
      LOOP AT ti_includes.
        ADD 1 TO vg_contador.
        DESCRIBE TABLE ti_includes.
        PERFORM evitar_time_out USING sy-tfill.
        MOVE ti_includes-nivel TO vg_nivel.
        ADD 1 TO vg_nivel.
    *- ESVAZIA TABELA INTERNA.
        REFRESH ti_programa.
        READ REPORT ti_includes-nome INTO ti_programa.
        LOOP AT ti_programa.
    *- PROCURA POR INCLUDES.
          IF p_incl EQ c_x.
            PERFORM procura_include.
          ENDIF.
    *- PROCURA POR FUNÇÃO.
          IF p_func EQ c_x.
            PERFORM procura_funcao.
          ENDIF.
    *- PROCURA POR SUBMIT.
          IF p_submit EQ c_x.
            PERFORM procura_submit.
          ENDIF.
        ENDLOOP.
      ENDLOOP.
    ENDFORM. " VERIFICA_INCLUDE_FUNCAO_SUBMIT
    *& Form EVITAR_TIME_OUT
    text
    -->P_SY_TFILL text
    -->P_SY_SUBRC text
    FORM evitar_time_out USING p_sy_tfill.
      DATA: vl_total(10) TYPE n,
      vl_atual(10) TYPE n.
      MOVE: p_sy_tfill TO vl_total,
      vg_contador TO vl_atual.
      CONCATENATE 'Total:' vl_total '-' 'Atual:' vl_atual
      INTO vg_texto
      SEPARATED BY space.
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
        EXPORTING
          text = vg_texto.
    ENDFORM. " EVITAR_TIME_OUT
    *& Form PROCURA_SUBMIT
    text
    --> p1 text
    <-- p2 text
    FORM procura_submit.
      CLEAR: vg_conta_espaco, vg_palavra, vg_ini_contagem.
    *- VERIFICA SE NA LINHA DO PROGRAMA EXISTE ALGUM INCLUDE.
      SEARCH ti_programa-codigo_fonte FOR c_submit.
    *- SE ENCONTROU INCLUDE E SE A LINHA NÃO ESTÁ COMENTADA...
      IF sy-subrc EQ 0
      AND ti_programa-codigo_fonte+0(1) NE c_comentario.
    *- VERIFICA TODOS OS 7
        DO 72 TIMES.
          vg_inicial = sy-index - 1.
          MOVE ti_programa-codigo_fonte+vg_inicial(1) TO vg_caracter.
          IF vg_ini_contagem EQ c_x AND vg_caracter IS INITIAL.
            ADD 1 TO vg_conta_espaco.
          ENDIF.
          IF NOT vg_caracter IS INITIAL.
            MOVE c_x TO vg_ini_contagem.
            IF vg_caracter EQ c_ponto.
              EXIT.
            ENDIF.
    *- MONTA PALAVRA.
            IF vg_conta_espaco LT 2.
              CONCATENATE vg_palavra vg_caracter INTO vg_palavra.
    *- CONVERTE PARA MAÍUSCULA PARA FUTURA COMPARAÇÃO.
              TRANSLATE vg_palavra TO UPPER CASE.
    *- SE ENCONTROU ALGUM INCLUDE
              IF vg_palavra EQ c_submit.
                CLEAR vg_palavra.
              ENDIF.
            ELSE.
              EXIT.
            ENDIF.
          ENDIF.
        ENDDO.
    *- PESQUISA NOME DA FUNÇÃO
        READ TABLE ti_includes WITH KEY nome = vg_palavra.
        IF NOT sy-subrc IS INITIAL.
          IF vg_nivel LE p_nivel.
            MOVE: vg_palavra TO ti_includes-nome,
            vg_nivel TO ti_includes-nivel.
            APPEND ti_includes.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDFORM. " PROCURA_SUBMIT
    *& Form CONSISTI_PARAMETROS
    text
    --> p1 text
    <-- p2 text
    FORM consisti_parametros.
      IF p_nivel IS INITIAL.
        MOVE 1 TO p_nivel.
      ENDIF.
      IF p_prog IS INITIAL AND p_tcode IS INITIAL.
    *- NOME DO PROGRAMA E NOM
    *- DEVE SER INFORMADO.
        MESSAGE ID 'ZF' TYPE 'I' NUMBER '000' WITH text-003.
        STOP.
      ENDIF.
      IF NOT p_prog IS INITIAL AND NOT p_tcode IS INITIAL.
    *- SOLICITA AO U
        MESSAGE ID 'ZF' TYPE 'I' NUMBER '000' WITH text-004.
        STOP.
      ENDIF.
    ENDFORM. " CONSISTI_PARAMETROS
    *& Form INICIALIZA_TABELA
    text
    --> p1 text
    <-- p2 text
    FORM inicializa_tabela.
      DATA vl_pgmna LIKE tstc-pgmna.
      REFRESH ti_includes.
      IF NOT p_prog IS INITIAL.
        MOVE: p_prog TO ti_includes-nome,
        '0' TO ti_includes-nivel.
        APPEND ti_includes.
      ELSEIF NOT p_tcode IS INITIAL.
        SELECT SINGLE pgmna
        FROM tstc
        INTO vl_pgmna
        WHERE tcode EQ p_tcode.
        IF sy-subrc EQ 0.
          MOVE: vl_pgmna TO ti_includes-nome,
          '0' TO ti_includes-nivel.
          APPEND ti_includes.
        ENDIF.
      ENDIF.
    ENDFORM. " INICIALIZA_TABELA
    *& Form CABECALHO
    text
    --> p1 text
    <-- p2 text
    FORM cabecalho.
      DATA vl_complemento(50) TYPE c.
      IF p_tcode IS INITIAL.
        CONCATENATE '(Program)' p_prog
        into vl_complemento
        SEPARATED BY space.
      ELSE.
        CONCATENATE '(Transaction)' p_tcode
        INTO vl_complemento
        SEPARATED BY space.
      ENDIF.
      FORMAT COLOR COL_KEY.
      WRITE: /001 sy-uline,
      /001 sy-vline,
      040 'User Exits in a Program',
      vl_complemento,
      140 sy-vline,
      /001 sy-uline.
      WRITE: /001 sy-vline,
      003 'Program Name',
      044 sy-vline,
      046 'Level',
      052 sy-vline,
      054 'Lineno',
      065 sy-vline,
      067 'UserExit',
      140 sy-vline,
      /001 sy-uline.
    ENDFORM. " CABECALHO
    *& Form USER_EXIT_NAO_ENCONTRADA
    text
    --> p1 text
    <-- p2 text
    FORM user_exit_nao_encontrada.
      DESCRIBE TABLE ti_user_exit.
      CHECK sy-tfill IS INITIAL.
      FORMAT COLOR COL_NORMAL INTENSIFIED ON.
      WRITE: /003 'Userexit does not exist',
      139 ' '.
      FORMAT RESET.
    ENDFORM. " USER_EXIT_NAO_ENCONTRADA
    *& Form LISTA_USER_EXIT_ENCONTRADA
    text
    --> p1 text
    <-- p2 text
    FORM lista_user_exit_encontrada.
      DATA vl_cor TYPE c.
      LOOP AT ti_user_exit.
        IF vl_cor EQ c_x.
          CLEAR vl_cor.
        ELSE.
          MOVE c_x TO vl_cor.
        ENDIF.
    *- AJUSTA COR NA TELA.
        IF vl_cor EQ c_x.
          FORMAT COLOR COL_NORMAL INTENSIFIED ON.
        ELSE.
          FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        ENDIF.
    *- INÍCIO DA IMPRESSÃO.
        WRITE: /003 ti_user_exit-programa,
        046 ti_user_exit-nivel,
        054 ti_user_exit-linha,
        067 ti_user_exit-codigo_fonte,
        139 ' '.
      ENDLOOP.
    ENDFORM. " LISTA_USER_EXIT_ENCONTRADA
    *& Form RODAPE
    text
    --> p1 text
    <-- p2 text
    FORM rodape.
      DESCRIBE TABLE ti_includes.
      FORMAT COLOR COL_TOTAL.
      WRITE: /001 sy-uline,
      /001 sy-vline,
      003 'Total include searched:', sy-tfill,
      ' - with level:', p_nivel,
      140 sy-vline,
      /001 sy-uline.
    ENDFORM. " RODAPE

  • Generic Extraction - Using Function Modules

    Hi Friends,
    Can you pl let me know the step by step process for creating generic extraction using function module?
    Thanks in Advance.
    Regards,
    Ari.
    Please search the forum before posting a thread
    Edited by: Pravender on Aug 5, 2010 7:31 PM

    Hi,
    Plz find this doc.
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33.
    And go this link...
    http://www.sdn.sap.com/irj/scn/advancedsearch?query=genericextractionwithfunctionmadule
    Regards.....KP
    Edited by: kundan.sap on Aug 5, 2010 4:35 PM

  • Generic extraction using table

    Hello friends,
    We have three methods in Generic extraction, as we know.
    1. Using view/Table
    2. Using FM
    3. Using Infoset Query
    I know pretty well the extraction using View, but when do we use "Table"?
    Is there a specific method to perform generic extraction using TABLE?
    Please clarify

    Thanks for the replies.
    In case of a generic extraction with view, i've followed the below procedure.
    1. RSO2.
    2.create a generic datasource by giving a view name and selecting the fields for selection criteria, save and generate.
    3. replicate data sources in BW.
    4. create an infosource and assign the data source, mapping and create an infopackage to load data.
    Now ,
    1. how do we enable Delta for this method?
    2. Is  this possible at all? if yes, how?
    3. How do we proceed after the replication of DataSources in BI? specifically, procedure in BI?
    Pls clarify.

  • When to go for generic extraction using view and infoset query?

    Hi,
                        Can anyone clarify me when we should go for generic extraction using view and when we should go for generic extraction using infoset query....
    Also what is the difference between view and infoset?
    I tried but could not find out....
    Regards,
    Kalyani.

    Hi Kalyani,
    We normally go for View or infoset when the data to be fetched in BW is distributed in different tables in SAP R/3.
    Had the data been available in one table we can easily build our datasource on that table but if there are more tables then its not possible to do it without Views or Infosets. You can use Function Modules to build your datasource in case it involves complex logic to figure out the data from various tables.
    Depending upon the table relationships we create view and include various fields from these tables in that view. Same is with the Infosets, you can have more flexible options like Outer Join, left outer Join etc.
    Regards,
    Pratap Sone

  • Issue with generic extraction using FM

    Hi All,
    I am trying to load from one DSO to other DSO, where i am trying to use generic extraction using FM, where i created strucutre of second DSO .
    created Generic datasource with Function module.
    when i am loading data using infopackage, its loading perfectly into PSA(with 100 records) and when i am loading thru DTP to Data target( second DSO), it is looping many records in each datapackage(like 8 million in each package) and updating into datatarget finally 100 records. but it is taking long time to finish the process.( i copied RSAX_GET_SIMPLE_DATA) and added transformation logic to it .
    so i would like to know, if there is anything i have to change in the Function module code, to fix this.
    i would also like to know,  request is already in PSA, will it again extract from FM, when updating thru DTP.
    Thanks
    R,man
    Points will be awarded.

    Hi
    I also had the same process. In the code of the function module. just check the Raise Exception code, probably ABAP guy can help. Also try to debug the code in RSA3 in debug mode. Actually it is going to a infinite loop, I guess.
    Regards
    Souresh

  • How to schedule Query Extracts using RSCRM_BAPI

    Hi,
    Can you give me the link to the document How to schedule Query Extracts using RSCRM_BAPI  . I do not have userid password to view the same.
    Thanks for the help.

    Hi,
    this is the link for the document..
    https://websmp205.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700004400232004E
    thnks.

  • Hierarchy Extraction using Open hub Destination

    Hi,
    I need to extract hierarchy data for Application code(YAPPLCD) using OHD. In the Hierarchy there are 4 components(Industry, Market, Application Group and Application Code). i need to get all the 3 details for the Application Code(i.e to which Indusrty does it belong, Market and Application Group).But HIerarchy table is having one record for each apllication code, Market, Application Group, Application code.
    How to get relevant data for the application code?
    My file format should be:
    Appl.Code | Appl.Group | Market | Industry.

    Hi Suma...
    The SAP Open Hub service enables you to distribute data from an SAP BI/BW system into external data marts, analytical applications, and other applications. With this, you can ensure controlled distribution using several systems. The central object for the export of data is the InfoSpoke. Using this, you can define the object from which the data comes and into which target it is transferred, leveraging SQL Server Integration Services (SSIS) as the transfer/transform mechanism. 
    SAP BI objects such as InfoCubes, ODS objects, or InfoObjects can act as open hub data sources. You can select database tables or flat files as open hub destinations, and then use those destinations as actual sources within SSIS.  To automate the extraction using SAPu2019s Open Hub Service, youu2019ll need to setup a process chain. Note that both a full and delta modes are also available as the extraction mode.
    As stated already with direct extraction from SAP R/3, once data is extracted out of SAP NetWeaver® BI (SAP BW), the destination of that data could be any relational database (such as SQL Server), and then reports (from SSRS) and multi-dimensional cubes (from SSAS) can be created from that database data.  The resulting SQL Server reports/cubes could then be used within the Microsoft Business Intelligence delivery mechanisms, such as through Excel, SharePoint, PerformancePoint, etc.
    Hope this below link may helpful
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c08b1f70-6fb1-2b10-97a5-df4c503e03cb
    Regards
    Sudheer

  • String extract using regular expression

    Hi
    I have text like this "<a>45</a><ct>Hi</ct><R>45 85</R><H>Here</H>" .I want to extract using regular expression or any techniques the text between <R> and </R> also need to replace the space with pipe between 45 and 85 like "45|85"
    Edited by: vishnu prakash on Mar 2, 2012 4:42 AM

    Hi,
    Here's one way:
    REPLACE ( REGEXP_REPLACE ( txt
                    , '.*<R>(.*)</R>.*'
                    , '\1'
         , '|'
         )This assumes there is only one <R> tag in txt.
    Always say which version of Oracle you're using. The expression above will work in Oralce 10 and up, but starting in Oracle 11 you can use REGEXP_SUBSTR rather than the less intuitive REGEXP_REPLACE.
    Edited by: Frank Kulash on Mar 2, 2012 7:48 AM

  • Delta Extraction Using Function Module ( Customization )

    Dear Experts,
    I want a sample code for Delta Extraction using Function Module ( If it is customized already working code very helpful ), I have already created Function Module but Full update is happening. If I give delta update again it is retrieving all records. It is very urgent, if you have please send me to the following mail ID.
    [email protected]
    Best Regards,
    SGK.

    Hi SGK,
    I've done this for a delta based on a timestamp and it's actually pretty easy.  The basic steps are:
    1) Create an extract structure in SE11.  Make sure the structure has a date or timestamp field in it that you can use for delta.  You'll need to include the field twice if you also want to extract it to BW/BI since once it's chosen as the delta field then it will be hidden in the interface.
    2) Create the extractor function module in SE37.  You can use RSAX_BIW_GET_DATA_SIMPLE as a template.  Make sure your logic restricts the data it retrieves according to the selections that are passed in I_T_SELECT, including restrictions on the delta field.
    3) Create a generic DataSource in RSO2.  Click Extraction by FM then fill in your extract structure and function module.  Click Generic Delta and pick your delta field and the appropriate radio button (time stamp or calendar day).  If your delta field is a timestamp field then be sure to set the upper and lower safety limits to -86400 and 86400 respectively.  This might not be necessary on your version of SAPI but on mine there is a bug where it doesn't translate between system time and UTC (GMT) correctly so this was necessary.
    You don't need to program any special delta handling logic in your function module as long as you restrict the data you retrieve based on the delta field (I_T_SELECT).  This is because the SAPI takes care of catching the init, delta and repeat requests, translating them to the appropriate delta field values, and then passing them to your function module as if it was a full extraction for a specific date or timestamp range.
    Hope this helps!
    Jason

  • BW extraction using DB connect

    Can some one post me step by ste guide for BW extraction using DB connect.
    I need to extract data from Oracle 10G.
    Thanks and Regards
    Babu

    Hi Babu:
    Please refer to SAP Note 518241 - "DB Connect in BW for an external Oracle database".
    This paper also might help.
    "Transferring Data with DB Connect"
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2f0fea94-0501-0010-829c-d6b5c2ae5e40?QuickLink=index&overridelayout=true
    Regards,
    Francisco Milán.

  • BW Extraction using DS returning empty records

    Hi
    I am trying to extract data using BO DS 3.2 into BW 7.0. I am using BW as well as ECC 6.0 as a source in two separate jobs. I have setup a new source system which for BO DS in BW.
    The RFSserver is up and running
    However whenever I am running the extract I am getting empty records i.e. records do get extracted but they are blank. The job runs successfully in BO DS. I cna see it in BW in rsmo as having run successfully.
    I have tried extracting to a flat file from BO DS and that returns records
    I have tried debugging by setting a breakpoint just after my transorm and just before it passes data to the transfer stucture. In all positions I am able to see data exept in my final target. In the PSA also i am getting null records.
    I have used an ABAP flow as weel as a normal Data Flow.
    Any help would be appretiated
    Thanks & Regards
    Vinieth

    Vinieth Kuruppath -
    Yes you can use ABAP DF inside normat data flow to extract the SAP ECC data into BODS. put SAP tables and join them with relevant queries. jott your queries with Data transport to hold the data. This all will be inside a single ABAP data flow.
    for BW Integration you have to use open hub destinationa mechanism. also see below link for modelling a connection between BO & BW
    BW 7.30: Modeling integration between SAP Business Objects Data Services and BW | Part 1 of 2 – Connect Source System
    hope it helps
    thx
    Deep

  • GL Balance sheet accts extracts using GLT0 table

    Hi Experts
    Please advise me as I need some help urgently
    My client wants to extract all the closing balances from GL Balance sheets accts to their third party tool for reconciliation, we are using Version 4.7
    Balances in all the currencies (Transaction, Local and Group currency)
    I looked at the table GLT0: Am not able get the correct period number its obly displays period 16, and also the cumulative balance
    e.g. Previous months closing balance is this months opening balance right am not getting any previous months movements
    and if I clear any open items of previous months invoice its reflecting in the current period but remains same as previous period,
    please advise on which table to look at
    the bottom line is all GL balance for (Trail balance) extracts, I have to give instructions to the ABAPER for the extracts
    please explain in details which table to look at and also the fields,
    thanks
    Kumar

    Krishna
    Many thanks for your reply, can you please clarify me in details please
    in table GLT0 all the periods are independent and the previous months balance is not rooling out to this month so please clarify me the logic so that makes my life very easy, thank you
    regards
    Kumar

  • Error while doing BAPI extract using tcode  RSCRM_BAPI

    Hi,
      I am trying to extract a OLAP Bex query into a table.  However, I am getting the error message that
    Error: Metadata for extract /BIC/0CZCARRYOVR is inconsistent
    Error: Error 0 when generating from extract /BIC/0CZCARRYOVR
    Where ZCARRYOVR is my extract table.  What could be the reason?
    What had happened is that I created this extract table before and then deleted it from SE11.  But now I cannot create the table while extracting.  If I give a brand new table name then it works fine.  Is there any place where table metadata is stores.  I checked TADIR table and there was no extry.  I should have used SE14 and delete the table from database but cant use it now since the dictionary table doesnt exist.
    thanks

    Hi ,
    I have the same issues. If you have solved the issues can you please let me know the solution for this.
    Regards,
    Varma

Maybe you are looking for