Extractor 2LIS_03_BF
Hi all,
We have recently upgraded our R/3-system to ver ECC 6.0 and are runing BW in version 3.5.
After this upgrade we have discovered differences in our Inventory management in BW in extractor
2LIS_03_BF. Does anyone know if there has been any changes regarding this extractor in version
ECC 6.0?
Thanks,
Ingmarie
Hi,
There are no changes to the extractor in ECC 6.0 version.
Before the upgrade hove you ensures that the delta queue was emptied ? was the schedules job to push that data to delta queue disabled / stopped ?
have you re-scheduled the V3 update job ?
regards
Venkata Devaraj
Similar Messages
-
BI-MM : extractor 2LIS_03_BF activation with error
Hi guru,
I am working with BI 7.0 and Business Content 7.03
I have activated the cube 0IC_C03 and the associated datasources. But the transformation for datasource 2LIS_03_BF (stocl mvt) shows : start routine sytaxe error
Error Details :
In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter
"SOURCE_PACKAGE" is incompatible with the formal parameter
"DATA_PACKAGE".
Please could you help me so I fix this issue as my mission is ending
Thanks a lot in advanceHi Firmin,
I already faced and passed this problem;
Re: Start Routine in 7.0
Problem is difference between type definition "_ty_s_SC_1" and "_ty_s_SC_1_full" on start routine
data package type: tyt_SC_1_full ( derived with tys_SC_1_full )
source package type: tyt_SC_1 ( derived with tys_SC_1 )
Eliminate differences adding and commenting lines
only on tys_SC_1_full.
my example
comment line
recno ...
insert lines
logsys type rsdlogsys ,
record type rsarecord ,
thx. -
2LIS_03_BF standard extractor does not extract records
Hi,
I enabled the standard extractor 2LIS_03_BF (mov.mercancias), I am probrando data extraction through rso2 transaction, and does not draw anything (0registros) and tables sources (msec and mkpf) if data exists I have to make some configuration prior to extractor, to extract data?
This is active in the transaction LBWE.
Greetings,See response in duplicate thread: [2LIS_03_BF standard extractor extracts data not;
-
2LIS_03_BF standard extractor extracts data not
Hi,
I enabled the standard extractor 2LIS_03_BF (movement of goods), I am testing the data extraction through RSO2 transaction, and does not draw anything (0 records) and tables sources (mseg and mkpf) if data exists I perform some configuration prior to extractor, to extract data?
This is active in the transaction LBWE.
Greetings,Hi,
Please check whether the following settings were maintained under
SBIW - Settings for Application-Specific Data Sources (PI) - Settings:
Inventory Controlling - Determine Industry Sector and Stock
initialization.
Maintain the Industry sector as "Standard" and Initialize the stocks
under stock initialization 2LIS_03_BX.
Also maintain the Application Indicator for BTE under transaction "BF11"
view: TBE11 in R/3.
Fill the setup tables for material movements 2LIS_03_BF and
revaluations 2LIS_03_UM
Set up tables for Inventory can be seen under SE11.
1. MC03BX0SETUP
2. MC03BF0SETUP
3. MC03UM0SETUP
Make sure after carrying out the above activities these tables should
display records.
Then start the extraction using 2LIS_03_BF, and 2LIS_03_UM data sources.
Santosh
Edited by: Santhosh Nagaraj on Nov 2, 2009 10:20 PM -
Enhance 2lis_03_bf
I need to enhance the extractor 2lis_03_bf
but rsa6 not applicable on this extractor, say "DataSource 2LIS_03_BF does not allow append structures" use tr. LBWE
but I need use add field what not content in enhance LBWE
Can I enhance 2lis_03_bf in tr. se11 and fill this in User-exit?
ps:Sorry for bad englishhi,
rsa6, double click 2LIS_03_BF, in next screen, double click extract structure MC03BF0, it will then go to structure screen, click 'append structure', system will propose a structure name, you can accept it, in next screen you can add your own field zz ....
check threads
Enhancement
User exit
and download pdf 'enhancements in sap bw'
here you can find the steps ...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5
some weblog on enhancement
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
http://www.ko-india.com/content/weblogs/weblog_custom_fields_1.pdf
(= /people/ajay.das/blog/2005/03/28/custom-fields-and-bw-extractors-making-a-mixed-marriage-work-part-1-1
/people/ajay.das/blog/2005/03/28/custom-fields-in-standard-extractors--making-a-mixed-marriage-work--part-12 )
hope this helps. -
How to find where the code for append structures for LIS extractors?
Hi,
I found 4 append structures for extractor 2LIS_03_BF,
Out of 4 append structures, I found code for one, using where-used option. But in vain for other 3. Is it possible they didn't transport the code for remaining structures? how to find that?
Cheers,
Kannan NKannan,
When ever you apply a logic to populate tdata for the appended filed then you will be writing some code in CMOD transaction code where you will find a ZXRSAU01
program, just double click on that then it will take you to the complete exit. Ther you can find with your data source name.
Hope it helps...
****Assign Points if it helps******
Gattu -
Hello Experts,
can anybody help me with this issue:
I am extracting data for the datasources 2lis_02_itm and 2lis_03_bf. The bw scenario is a pilot project and this is the first transactional data ever loaded into the bw system. At the moment i am facing the problem, that our database seems to be too small (50 GB). I need to know exactly how much data will be extracted from these two datasources.
The main problem is, that i can not figure out the exact amount of datasets for both extractors. My bw system dumped after i loaded around 60 million datasets only for the datasource 2lis_02_itm (2years). That means that there is almost 50 GB purchase order data in the system. Of course figured out hoch much data is in ekpo and ekko, but there is much more data extracted. I found out, that the tables cdpos and cdhdr are also relevant, because they keep all changes on purchase orders. I think the extractor delievers all these changes. How can i find out how big the tables cdpos and cdhdr are (i think they are strucutres)?
For the extractor 2lis_03_bf i did not find tables which keep all changes.
To sum up: How can i find out how much data will be extracted to bw for the datasources 2lis_02_itm and 2lis_03_bf to bw. I need to know that in GB size.
Can you provide a way to figure that out?
Best regards
Janos BuglerHi,
We can't measure the size manually, we have tool QUICK SIZER in service.sap.com there you give your inputs and then it will suggest the Hardware sizing.
Thanks
REeddy -
How to find which SAP R3 table are read during SAP R3 extractor execution ?
Hi Colleagues,
I would like to know which sap r3 table are read during the execution of a sap r3 extractor ?
1. I execute 2lis_03_bf extractor
2- I select debug mode
3. I put a break-point statement at abap command : select
I just see the program going to technical table, mara table and user exit from.
I am sure that this extractor read also MBEW table but I did not found it during the execution of the debug mode.
Can someone help me ? What should I do to see from which table the extractor 2lis_03_bf extractor is retrieving data ?
Thanks !HI Hanson,
You maynot directly hit the source table when you debug a LO Extractor, as you should be aware that the data
is read as below in case of a LO datasources ,
INIT or FULL load --> from Setup tables
Delta --> from the delta queue
Also finding the Source table fora LO extractor is simple as you check the EC pool and understand that , check the
below blog for more details
/people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
But you can try with any other BI content extractor, for examle if you take a 0FI_AP_4
you find the table BSIK and BSAK are being read using FM
Regards,
Sathya -
Hi:
Please let me know if we have a BI Content extractor for EORD ( Purchasing Source List ) .
Thanks.I would like to have the vendor field from this table.
The extractor 2LIS_03_BF already has been implemented and it contains a vendore field as well.
I am really not sure if this field is good enough as when I contacted one of the MM consultants he has asked me to pick up the same from EORD.
I will have to either find out if there are any standard extractors on this table or I will be left with enhancing the BF extractor. Enhancing will again force me to do a re-init of the entire data if I want to have the historical data for the added field.
Awaiting for some suggestions on this!
Thanks -
Trouble with reinit of 2LIS_03_BF
Hi Gurus!!!
I am facing a special and urgent situation with the extractor 2LIS_03_BF. The problem is that I is not extracting all the records that need to extract to BW.
According to this document (http://scn.sap.com/docs/DOC-31044) I have done step by step all directions according to reinit this extractor. The difference according to the needs of the model have OLI1BW transaction in which the posting date range is 01/10/2013 - 31/12/2099, but the BW extractor is carried forward from 17/01/2014. I should note that the model which feeds on this exhaust is not a standard model.
I will be missing some configuration in ECC for the data capture extractor from the date which I am pointing at OLI1BW transaction?
Thanks in advance.
IgnacioHi Ignacio,
When you do full load after delta , there is an option you can convert load to reapir full.
Here you can specify selections( 2013 to 2014 any other) , once completed load. Go for init delta and then delta.
Method to select repair full.
1.Open Infopackage and click on Scheduler from menu bar.
2.Then click on repair full option.
3.check the tick box in dialog pop-up.
5.Pls select your selections(ex : based on date,comp code etc)
Regards,
Mohammed Raheez -
Hello Experts,
I plan to create a generic datasource on top of the infostructures S530 and S039. Before I do that, I wanted to confirm is there is a standard LO cockpit extarctor for these structures.
Thanks,
RishiHi,
for S039 there are the standard extractors 2LIS_03_BF and 2LIS_03_UM. S530 is a custom defined infostructure, so you need to create your own datasource for it.
regards
Siggi -
Hi all,
I am developing stock ageing report i would not able to find Below fields in existing cube, kindly guide me how i can get those fields data in BI. whether i can create generic extraction or ? please give yr suggestion.
Fields:
vendor sub range
consignment no
Return flag(Returnable)
And also GR data and GR qty already data availble how to find last GR date based on user input.Please sugges me.
Last GR date
Last GR qty
Thanks & Regards,
R. SaravananTry extractor 2LIS_03_BF. Or table MSEG.
-
Stock Overview (MMBE) Report in BW
Dear All,
We got a scenario where :
> The Key figure values like " Unrestricted Qty"," Quality Inspection ","Blocked Stock" shows different values in R3 when compared with BW.
------> When we boiled down,came to know that the extractor (2lis_03_bf) is not picking all Batches ,as compared with R3.Hence the Keyfigure values are less and different from R3.
It would be helpful if someone could take time to help us out on how this issue can be solved.Have checked the stock against MB5B and other reports aswell and the stock qt's are fine.but just that it shows different against MMBE in R3.
Manythanks
ArunHi Arun,
Weather u are drilling the report to the storage location wise.
if yes the data will never match as in Inventory side for some movment type accounting documents will not generate.
For Inventory level reporting i suggest u check the UPdate rule as per ur Indusry as they only are responsible for Data in BI.
Assign Points if it helps.
Regards,
sandeep -
Calculation of peaks in queries
Hello,
I'm facing a problem concerning a query, and I need help to find the best choice.
The aim is to display maximum issues of stock movements for one day, using infocube containing movements from standard extractor 2LIS_03_BF. More precisely, the key figures awaited are :
- 1st peak : maximum of stock issues in one day,
- 2nd peak : 2nd maximum of stock issues in one day,
- 3rd peak : 3rd maximum of stock issues in one day.
The first key figure is easy to implement, by using aggregation on calendar day, and maximum in local calculations.
The challenge is for the two other KF. For the moment, I have no solution to calculate it properly with query designer options.
I'm currently trying to solve this problem by using virtual key figures but, as far as I know, the ABAP code related is executed for each line selected from infoprovider, so it's difficult to calculate the peaks.
Is there some experts who can propose a solution to this huge problem ?
In advance, thanks for your contributions.
Regards,
F. BIDAUD
Edited by: Fabrice BIDAUD on Mar 11, 2008 10:27 AMHello,
I'm facing a problem concerning a query, and I need help to find the best choice.
The aim is to display maximum issues of stock movements for one day, using infocube containing movements from standard extractor 2LIS_03_BF. More precisely, the key figures awaited are :
- 1st peak : maximum of stock issues in one day,
- 2nd peak : 2nd maximum of stock issues in one day,
- 3rd peak : 3rd maximum of stock issues in one day.
The first key figure is easy to implement, by using aggregation on calendar day, and maximum in local calculations.
The challenge is for the two other KF. For the moment, I have no solution to calculate it properly with query designer options.
I'm currently trying to solve this problem by using virtual key figures but, as far as I know, the ABAP code related is executed for each line selected from infoprovider, so it's difficult to calculate the peaks.
Is there some experts who can propose a solution to this huge problem ?
In advance, thanks for your contributions.
Regards,
F. BIDAUD
Edited by: Fabrice BIDAUD on Mar 11, 2008 10:27 AM -
Good day,
Currently the Inventory Management extractors(2LIS_03_BF, 2LIS_03_BX, 2LIS_03_UM) only extracts Local Currency. We would like to extract the values in Group Currency as well. Doing currency translations is not an option for several business reasons. We have to have the Group currency as it appears in the Material Ledger. I debugged the standard extractor for Inventory management and noticed that the extractor caters for a BAdI(Business Add In). Can anyone please give me an indication where I can look for this BAdI. I looked on SPRO on R/3 and there is a list of BAdI's under BW, but I don't know which one to use and how to use it. I would appreciate help in this regard.
Thank you.
Regards.
Verushca HunterHi dear and welcome on board !
I think you have to fill your additional field in the usual exit provided for customer enhancement (RSAP0001) in CMOD transaction, EXIT_SAPLRSAP_001 in the include ZXRSAU01...
Otherwise you can go fot the new RSU5_SAPI_BADI...
Hope it helps!
Bye,
ROberto
...and please don't forget to reward the answers...it's THE way to say thanks here !
Maybe you are looking for
-
Why the same name of process comes out in AIX , in java. please help me.
Hello. I have two questions related to Jvm. I've developed Job scheduler program which is doing somthing as the DB schedule is set in the way of Multi thread. Currently , I'm in the process of testing this one. It is good , if in the normal case. How
-
How to use 2 apple id's in iphone
can i use 2 apple id's in my iphone ..................together
-
How do I reload purchased music on my desk top after a computer crash restored with back up external hard drive?
-
Bridge CS6 not generating correct thumbnails for RAW files
I'm running Bridge CS6 (the latest version, 5.0.2.4) on a 2013 MacBook Pro (OSX 10.9.1) and suddenly as of today Bridge is no longer updating the thumbnails for my RAW files. All other image and video file formats are having thumbnails generated but
-
Automated Check Clearing Process
Dear Experts, We will be receiving a flat file from the bank with cleared checks informaiton. I need to post the entries in AP for the checks that are cleared. It's not in EDI format. Probably xml or text file. Can someone please list the steps to pr