Extractor Checker(RSA3)getting DUMP

Hi Friends,
                 When i try to execute the datasource 0CFM_DELTA_POSITIONS, it is giving the dump, actually i've given the parameters like this before going to be excuted:
Data Records / Calls: 999999
Diplay Extr. Calls: 10
Update Mode: D
                But if i give the less no fo Data Records/Calls 350 and display Extr. Calls 10, then it is showing the data around 4,000 change recors, so in this case, if the volume of data is high, then it is going dump.
           Ver: ECC6
            Swap Memory: 16 GB
             RAM: 4GB
Awaiting for your inputs,
Regards,
BalajiReddy

Hi,
This problem comes when there is not enough table space for capturing your RSA3 data.
You have to talk to your basis guy and ask him to increase the table space and also the time.
Hope this helps
Assign points if useful.
Regards,
Kiran

Similar Messages

Error in Extractor checker - RSA3

Hi gurus,
I tried to run the extractor 0CO_PC_ACT_10 in RSA3-extractor checker and it just take so long and then it dumps. I am just confused because this extractor works fine and very fast when I loaded data to BW with the same selection as I run the checker.
Any ideas would be greatly appreciated.
Thanks,
Edson

Hi,
I uploaded 525 records in BW with runtime of only 1m 23s but when i run the checker with the same selection as with my infopackge, it takes so long and then dumps.
st22 says...TSV_TNEW_PAGE_ALLOC_FAILED, The internal table "IT_208" could not be enlarged further. You attempted to create a block table of length 1106192 for the internal table "IT_208".
I think this means it exceed the allocated time to run a certain program.
My question is why it takes so fast to upload in BW and in other hand it dumps in RSA3? Is it because RSA3 is being run on line? .. is there a way to run it in backgroud and just check the extracted data afterwards?
I am not sure of my thoughts.. i just thinking of some possibilities.
Thanks,
Edson

Extractor checker (RSA3)

Hi,
All, can any body please tell me what is a extractor checker is and the purpose of this in BI-7.03,
Point's will be awarded
Thanks in advance
regards
kittu

Hi,
RSA3 will simulate the dataload from a particular datasource, like you can how many records are there for full upload, delta upload.
Here if you run RSA3 with debugging checkbox on, you can also debug the Extractor function module.
Hope this helps.
Best Regards,
Rajani

Extractor checker not working

Hi Geeks,
It seems all the questions in the world are vexing me today. Any ways.
I activated 2LIS_03_BF using RSA5.
I checked whether 2LIS_03_BF is transferred correctly in RSA6.
Then I activated data-source in LBWE.
I went to extractor checker (RSA3)to check whether 2LIS_03_BF works fine.
But it does not extract any records, even though I have thousands of entress seating in MSEG ( material document)
I am not giving any selection criteria. (even for selection criteria I my extractor checker is giving me 0 records)
Help me most awaited.
Monica

Hi Monica,
In RSA3 in the update mode option it will be by default full load...so when u r trying to extract the records for the BF datasource you are getting 0, because u didn't fill the setup tables..and in lo cockpit datasources won't pick data from the application tables so first we have to fill the setup tables
As Pradip said their is no harm in filling the setup tables even if u any postings THIS IS APPLICABLE ONLY TO DEVELOPMENT.
IN PRODUCTION before filling the setup tables you have to make sure that the system is locked for any new or changed documents in the concerned application.
thanks and regards
neelu

Delta in Extractor Checker

Hi,
i have created a generic datasource with Delta upload, which is based o a table.
When i extracted it in the Extractor checke RSA3 with UPdate mode 'F', it works.
When update mode is 'D', come an popup . It says that error occurs. I cant see the details of error.
My question: How to check the delta datasource in Extractor checker?
Thanks

Hi ,
Please check the below thread.
How to check whether the Datasource is delta enabled or not
Hope it helps.
Thanks & Regards,
Ramnaresh.P.

Extractor checker - too few records

Hi experts,
I used extractor checker (rsa3) for Full Data on 2lis_11_vahdr and 2lis_11_vaitm. I got only 2 recrods in the results.
Isn't there something wrong. VBAP has tons of records so does VBAK.

it will show the number of records it has in setup tables.
any of your colleague filled setup tables for only one or 2 document numbers, that is why it is showing is showing 2.
Delete setup Tables data from LBWG transaction using your application area.
refill the setup tables wihtout any selection. you will see entire data.
Regards,
Nagesh Ganisetti.
Assign points if it helps.

Errors occurred during the extraction in RSA3 - Extractor Checker

Hello,
I'm trying to check the standard datasource - 0CRM_QUOTATION_I (CRM Quotation Item) in RSA3 (extractor checker) in the CRM system but it returns a pop-up 'Errors occurred during the extraction'.
Could someone please let me know where and how to check the error as it is not very obvious from the pop-up?
Many thanks.
Regards,
Sri.

HI Sri,
Sometimes the BWA5 Adaptor settings are not properly transported to QA from DEV ,
Try this ,
Create a transport request manually from DEV again for the below object in TCODE : SE03 ( Objects in Requests --> Include Objects in a Transport Request --> Under selection by type and name --> choose radio button --> Selected Objects and provide the below entries )
R3TR SMO4 0CRM_QUOTATION_I
( you will have to enter SM04 and datasource name only ,press enter it will pick up R3TR automatically ) and then transport to QA
This should resolve the issue
Regards,
Sathya

CREATE_OBJECT_CLASS_NOT_FOUND runtime error during extractor checking

Hi Gurus,
I had to modify a generic data source based on a database view. I had to add a field for extraction. Since this field was available in the tables on which the view was built but not used in the view, I modified the view to to include the field. Then, I modified the extract structure to include the newly added field.
Now, when I try to check the extractor in RSA3 (extract checker), I end up getting a runtime error with details as below.
Runtime Errors                    CREATE_OBJECT_CLASS_NOT_FOUND
Except.                    CX_SY_CREATE_OBJECT_ERROR
Date and Time                    3/6/2012     5:46:07
     Short text
          CREATE OBJECT: The class "\CLASS=ZCL_IM_CLC" was not found.
     What happened?
          Error in the ABAP Application Program
          The current ABAP program "CL_EXIT_MASTER================CP" had to be
           terminated because it has
          come across a statement that unfortunately cannot be executed.
     Error analysis
          An exception occurred that is explained in detail below.
          The exception, which is assigned to class 'CX_SY_CREATE_OBJECT_ERROR', was not
           caught in
          procedure "INSTANTIATE_IMP_CLASS" "(METHOD)", nor was it propagated by a
           RAISING clause.
          Since the caller of the procedure could not have anticipated that the
          exception would occur, the current program is terminated.
          The reason for the exception is:
          The dynamically specified class "\CLASS=ZCL_IM_CLC" at CREATE OBJECT neither
           exists as
          local, nor as global class in the system, or is overshadowed by a local
          data type of the same name.
     Missing RAISING Clause in Interface
          Program                    CL_EXIT_MASTER================CP
          Include                    CL_EXIT_MASTER================CM002
          Row                    1
          Module type                    (METHOD)
          Module Name                    INSTANTIATE_IMP_CLASS
     Trigger Location of Exception
          Program                    CL_EXIT_MASTER================CP
          Include                    CL_EXIT_MASTER================CM002
          Row                    15
          Module type                    (METHOD)
          Module Name                    INSTANTIATE_IMP_CLASS
     Source Code Extract
     Line          SourceCde
     1          METHOD instantiate_imp_class .
     2
     3            DATA: abs_type_classname TYPE string,
     4                  imp_obj            TYPE imp_obj_type.
     5
     6          *   Look for objects that have been created for this class
     7            READ TABLE imp_obj_tab INTO imp_obj
     8                WITH TABLE KEY imp_name    = imp_name
     9                               calling_obj = caller.
     10            IF sy-subrc = 0.
     11              instance = imp_obj-obj.
     12            ELSE.
     13              CONCATENATE '\CLASS=' imp_class INTO abs_type_classname.
     14          ***** dynamic object creation     *******************************
     >>>>>              CREATE OBJECT instance TYPE (abs_type_classname).
     16          ******************************************************************
     17              imp_obj-imp_name    = imp_name.
     18              imp_obj-calling_obj = caller.
     19              imp_obj-obj         = instance.
     20              INSERT imp_obj INTO TABLE imp_obj_tab.
     21            ENDIF.
     22          ENDMETHOD.
Can anybody please help me solve this issue?

Hi Ajay,
Please check the following threads for your issue::
System Exception
Exception              CX_SY_CREATE_OBJECT_ERROR
Why is CREATE_OBJECT_CLASS_NOT_FOUND ?
Dump CREATE_OBJECT_CLASS_NOT_FOUND with BADI in MM_MATBEL archiving object
Regards,
Arpit

Why the 2LIS_08TRTK extractor can not get all data

Hello, BW Gurus.
Why the 2LIS_08TRTK and 2LIS_08TRTLP extractors can not get all data. I had used the RSA3 and get 10 registers, when a check at the VTTK table I had 20 registers, I didnt use filters at RSA3, could you help to know what happen o correct it.

Is it because
<i>
Shipment documents and their dependent objects (shipment stages as well as shipment items [deliveries in the shipment]) are only extracted into BW when the Shipment completion status has been set.
This is necessary because the numeric values that result from the delivery documents are only established at the time. If the data were already stored earlier in BW, the shipment data would not be updated if the delivery notes were changed in BW.
</i>
- from oss note 573470.

R/3 Extractor Checker doubt

I created a Custom Master and text datasource and when i do the RSA3 Extractor checker :
if i change the "Data Records / Calls" and try the extractor, the number of records extracted changes :
Like if i entered :
Data records / calls = 1000 - i get "570 records"
Data Records / Calls = 10000-i get 57 records.
My question is that : why is the number of records extracted not Consistent ??????
Similarly if i change the "Display Extr. Calls"
to 1 or 10 , the number of records changes.
Any suggestion please.
Thanks,
Shalini

Hi Shalini,
The idea in of these 2 fields in RSA3 is like this:
Data Records / Calls = 1000
Display Extr. Calls = 1
This means display one call and each call can include maximum of 1000 records. If you change the second parameter to 10, it means, display 10 calls (packages) with max of 1000 records per package.
Unfortunately, this figure is not always correct. I do not know the scenarios but like you mentioned, it is not always correct.
Thanks and Regards
Subray Hegde

Extractor Checker OK but actual Extract has no data!

Hi all,
Thanks for taking the time to read my post and for your help in advance
I have a simple custom function module in ECC6.0 which is getting employee information from LDAP. This information is then tagged on to a few other fields and sent to BW.
I created a data source based on this function module and I'm trying to send the data to BW. The Extractor checker is working fine and shows the right data. However, when I run the infopackage from BW I receive no data!
I checked the IDOCs as well and noticed that the info IDOCs are sent back to BW with 0 data records, which is telling me that the extractor is not sending back any data, despite it showing the data in the extract checker (RSA3)
Any thoughts?
Thanks,
Mamdouh

Thanks everyone,
The partner profile is ok, and when I test in RSA3 I see the data the I need - so running the extract in debug mode is fine, however running it in the background mode gives me 0 data records
I don't think it is an authorization error either !
Any thoughts?
Thanks again

Extractor Checker shows 0 Records

Hi,
I am working on Transport Management system of supply chain management. In RSA3 of the TMS system I checked for datasource 0TMS_SOR and 0TMS_SRQ. It showed 0 records inspite data being there. Since SCM is based on Business Objects Process Framework I am not able to check for data at table level and I don't know how to go about checking for the existence of data. The TMS developers say there is data in the TMS system but before integration with the BI system I just wanted to check in the Extractor checker with respect to the datasources. It shows 0 records. What could be problem ? How to go about this ?
Kindly help me on this !
Thanks in Advance,
Regards,
Hudson

Fanie, we are working on the same issue.
For SRQ, there are special 'scheduling' conditions that are used in the PPF framework, stating that only SRQ's with a lifecycle status of 'Complete' should be extracted. This logic is embedded in the PPF scheduling conditions with FM "/SCMTMS/CL_IM_SCHD_EXTR_SRQ"
Bottom line - Talk to the developers and ask if there are any SRQs that are 'Complete'. If not, that is why you are not getting any data from your extractor.
Justin

Getting dump when using do_sum in alv field cat in the output of the report

Dear Freinds,
             Iam getting the alv report when i click on the segma field (Sum) on my salary
field iam getting dump. and also if i try to print my alv output iam getting dump , only
happening to my custom report.
i have used the following code pleae correct me .
This perform is used for Layout settings
perform st_layout_build using gs_layout.
form st_layout_build using st_ls_layout type slis_layout_alv.
   st_ls_layout-no_input          = 'X'.
st_ls_layout-colwidth_optimize = 'X'.
st_ls_layout-zebra             = 'X'.
st_ls_layout-detail_popup      = 'X'.
endform.                    " st_layout_build
Field Catalog details
perform st_fieldcat_init changing gt_fieldcat.
form st_fieldcat_init changing fp_i_fieldcat type slis_t_fieldcat_alv.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 1.
ls_fieldcat-fieldname    = 'ORGUNIT'.
ls_fieldcat-seltext_l    = 'Orgunit'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 2.
ls_fieldcat-fieldname    = 'ORGTEXT'.
ls_fieldcat-seltext_l    = 'Orgdesc'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname    = 'SALARY'.
ls_fieldcat-seltext_l    = 'Salary'.
ls_fieldcat-col_pos      = 3.
ls_fieldcat-outputlen   = 15.
ls_fieldcat-do_sum       = 'X'.
ls_fieldcat-datatype     = 'CURR'.    "CURR
append ls_fieldcat to fp_i_fieldcat.
endform.
Variant
perform st_variant_init using gs_variant g_repid.
form st_variant_init   using st_gs_variant type disvariant
                             st_repid      like sy-repid.
clear st_gs_variant.
st_gs_variant-report = st_repid.
endform.                    " st_variant_init
g_repid = sy-repid.
perform st_comment_build using gt_list_top_of_page[].
form st_comment_build using   st_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
Listenüberschrift: Typ H
clear ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = text-000.
append ls_line to st_lt_top_of_page.
endform.                    " st_comment_build
     call function 'REUSE_ALV_GRID_DISPLAY'
      exporting
         i_buffer_active        = 'X'
        i_callback_top_of_page = 'TOP_OF_PAGE'
        i_callback_program     = g_repid
        is_layout              = gs_layout
        it_fieldcat            = gt_fieldcat[]
       i_structure_name       = 'i_final'   "c_i_final "'objec'
       i_save                 = g_save
        is_variant             = gs_variant
      tables
        t_outtab               = fp_i_pyrol_final
      exceptions
        program_error          = 1
        others                 = 2.
    if sy-subrc ne 0.
      message e018. " Displaying the ALV GRID has failed
    endif.
Please could any one let me know why iam getting dump when iam clicking for total
on my salary field.
Regards
latha

Dear Chandu,
my code iam giving in details
types : begin of ty_output_data,
        staffno     type pernr_d,
        staffname   type emnam,
        grade       type stell,
        orgunit     type orgeh,
        orgtext     type hr_mcstext,
        psgroup     type trfgr,      " Pay Scale Group
        salary      type maxbt,       "PAD_AMT7S,
        rrefunded   type pad_amt7s,
        leavepay    type pad_amt7s,
        mshortfal   type pad_amt7s,   " Medical Shortfall
        echkshfal   type pad_amt7s,   " Execute checkup shortfall
        ofindeduc   type pad_amt7s,   " Other Finance Deduction
        mtyprem     type pad_amt7s,   " maternity premium
        vpbonus     type pad_amt7s,   " VP/Bonus
        gratuity    type pad_amt7s,   " Gratuity
        vpay        type pad_amt7s,   " Variable pay
        mallowance type pad_amt7s,   " Meal Allowance
        overtime    type pad_amt7s,   " overtime
        other       type pad_amt7s, " OTHER
        pfundeecon type pad_amt7s,   " PFund Employee's Contribution
        banktrnsfer type pad_amt7s,   " Bank Transfer
        count       type i,
        end of ty_output_data.
data : i_final         type standard table of ty_output_data.
iam getting all my data in the internal table I_FINAL.
perform get_final_alv using i_final.
form get_final_alv using   fp_i_pyrol_final type ty_t_output_data.
*local variable declarations
data : l_v_idx      type sy-tabix.
*local work areas
data : l_wa_final type ty_output_data.
g_save = 'A'.
This perform is used for Layout settings
perform st_layout_build using gs_layout.
Field Catalog details
perform st_fieldcat_init changing gt_fieldcat.
Variant
perform st_variant_init using gs_variant g_repid.
g_repid = sy-repid.
perform st_comment_build using gt_list_top_of_page[].
if not fp_i_pyrol_final is initial.
    delete adjacent duplicates from fp_i_pyrol_final comparing all fields.
    call function 'REUSE_ALV_GRID_DISPLAY'
      exporting
         i_buffer_active        = 'X'
        i_callback_top_of_page = 'TOP_OF_PAGE'
        i_callback_program     = g_repid
        is_layout              = gs_layout
        it_fieldcat            = gt_fieldcat[]
       i_structure_name       = 'i_final'   "c_i_final "'objec'
       i_save                 = g_save
        is_variant             = gs_variant
      tables
        t_outtab               = fp_i_pyrol_final
      exceptions
        program_error          = 1
        others                 = 2.
    if sy-subrc ne 0.
      message e018. " Displaying the ALV GRID has failed
    endif.
endif.
endform.                    " get_final_alv
form st_layout_build using st_ls_layout type slis_layout_alv.
   st_ls_layout-no_input          = 'X'.
st_ls_layout-colwidth_optimize = 'X'.
st_ls_layout-zebra             = 'X'.
st_ls_layout-detail_popup      = 'X'.
endform.                    " st_layout_build
form st_fieldcat_init changing fp_i_fieldcat type slis_t_fieldcat_alv.
data: ls_fieldcat type slis_fieldcat_alv.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 1.
ls_fieldcat-fieldname    = 'ORGUNIT'.
ls_fieldcat-seltext_l    = 'Orgunit'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 2.
ls_fieldcat-fieldname    = 'ORGTEXT'.
ls_fieldcat-seltext_l    = 'Orgdesc'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 5.
ls_fieldcat-fieldname    = 'STAFFNAME'.
ls_fieldcat-no_out       = 'X'.
ls_fieldcat-seltext_l    = 'StaffName'.
append ls_fieldcat to fp_i_fieldcat.
   clear ls_fieldcat.
ls_fieldcat-col_pos      = 4.
ls_fieldcat-fieldname    = 'STAFFNO'.
ls_fieldcat-no_out       = 'X'.
ls_fieldcat-seltext_l    = 'StaffNo.'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 6.
ls_fieldcat-fieldname    = 'GRADE'.
ls_fieldcat-seltext_l    = 'Grade'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 3.
ls_fieldcat-fieldname    = 'COUNT'.
ls_fieldcat-seltext_l    = 'Headcount'.
append ls_fieldcat to fp_i_fieldcat.
if the field name is 'Salary' then do a sum on this field.
IF fp_fname = c_betrg.
    l_wa_fieldcat-do_sum    = c_x.
ENDIF.
NOTE : IAM GETTING PROBLEM IN THE BELOW SALARY.
IAM JUST CHECKING ITSELF NOT ALLOWING ME TO EXECUTE
clear ls_fieldcat.
ls_fieldcat-fieldname    = 'SALARY'.
ls_fieldcat-seltext_l    = 'Salary'.
ls_fieldcat-col_pos      = 7.
ls_fieldcat-outputlen   = 20.
ls_fieldcat-do_sum       = 'X'.
ls_fieldcat-datatype     = 'CURR'.    "CURR
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 9.
ls_fieldcat-fieldname    = 'LEAVEPAY'.
ls_fieldcat-seltext_l    = 'Leave Pay'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 10.
ls_fieldcat-fieldname    = 'MSHORTFAL'.
ls_fieldcat-seltext_l    = 'Med.Sfall'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 11.
ls_fieldcat-fieldname    = 'ECHKSHFAL'.
ls_fieldcat-seltext_l    = 'EX.Chckup.Sfall'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 12.
ls_fieldcat-fieldname    = 'OFINDEDUC'.
ls_fieldcat-seltext_l    = 'Oth.Fin.Deduction'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 13.
ls_fieldcat-fieldname    = 'MTYPREM'.
ls_fieldcat-seltext_l    = 'Mat.Premium'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 14.
ls_fieldcat-fieldname    = 'VPBONUS'.
ls_fieldcat-seltext_l    = 'VP/Bonus'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 15.
ls_fieldcat-fieldname    = 'GRATUITY'.
ls_fieldcat-seltext_l    = 'Gratuity'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 16.
ls_fieldcat-fieldname    = 'VPAY'.
ls_fieldcat-seltext_l    = 'Variable Pay'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 17.
ls_fieldcat-fieldname    = 'MALLOWANCE'.
ls_fieldcat-seltext_l    = 'Meal.Allowance'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 18.
ls_fieldcat-fieldname    = 'OVERTIME'.
ls_fieldcat-seltext_l    = 'Overtime'.
append ls_fieldcat to fp_i_fieldcat.
    clear ls_fieldcat.
ls_fieldcat-col_pos      = 19.
ls_fieldcat-fieldname    = 'OTHER'.
ls_fieldcat-seltext_l    = 'Other'.
append ls_fieldcat to fp_i_fieldcat.
pfundeecon
clear ls_fieldcat.
ls_fieldcat-col_pos      = 20.
ls_fieldcat-fieldname    = 'P FUND EMPLOYEES CONTRIBUTION'.
ls_fieldcat-seltext_l    = 'P.Fund.Emp.Contrib'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 21.
ls_fieldcat-fieldname    = 'BANKTRNSFER'.
ls_fieldcat-seltext_l    = 'Payment'.
append ls_fieldcat to fp_i_fieldcat.
endform.                    " st_fieldcat_init
form st_variant_init   using st_gs_variant type disvariant
                             st_repid      like sy-repid.
clear st_gs_variant.
st_gs_variant-report = st_repid.
endform.                    " st_variant_init
form st_comment_build using   st_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
Listenüberschrift: Typ H
clear ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = text-000.
append ls_line to st_lt_top_of_page.
endform.                    " st_comment_build
      FORM TOP_OF_PAGE                                              *
form top_of_page.
data: l_i_detailheader type slis_t_listheader.
To get the header for ALV
perform detail_header changing l_i_detailheader.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
      it_list_commentary = l_i_detailheader.
endform.                    "top_of_page
form detail_header changing fp_i_detailheader type slis_t_listheader.
data: l_wa_header       type slis_listheader,
        l_v_time         type slis_edit_mask,
        l_v_date         type slis_edit_mask,
        l_v_abkrs        type char5,
        l_v_pabrj        type char8,
        l_v_pagno        type char10.
Local Constants
constants: l_c_h type char1 value 'H',
             l_c_1 type i     value '1',
             l_c_edit type char10 value '__.__.____',
             l_c_slash type c value '/'. " constant for slash
To display the report Header
l_wa_header-typ = l_c_h.
WRITE sy-repid TO l_wa_header-info LEFT-JUSTIFIED.
write text-014 to l_wa_header-info left-justified.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To display the Page no
l_v_pagno =   sy-pagno + l_c_1.
l_wa_header-typ = c_s.
l_wa_header-key = text-008. " Page No:
l_wa_header-info = l_v_pagno.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To Display the User ID
l_wa_header-typ = c_s.
l_wa_header-key = text-009. " User ID
l_wa_header-info = sy-uname.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To Display the Date/Time
l_wa_header-typ = c_s.
l_wa_header-key = text-010. " Date/Time:
l_v_time = sy-uzeit.
l_v_date = sy-datum.
write: sy-uzeit to l_v_time.
write sy-datum to l_v_date using edit mask l_c_edit.
concatenate l_v_date
              l_c_slash
              l_v_time into l_wa_header-info+0(25) separated by space.
append l_wa_header to fp_i_detailheader.
clear: l_wa_header, l_v_date.
To Display the Report Description
l_wa_header-typ = c_s.
l_wa_header-key = text-011.                " Report Description
l_wa_header-info = text-012.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
append l_wa_header to fp_i_detailheader.
endform.                    " detail_header
I will be greatful if any one can please help me in removing me the dump.
REGARDS
LATHA.

Data mis match in extractor checker

Hi Gurus,
Please help me to solve this issue.
there is a mismatch of records when checking datasource through extractor checker. the extractor is showing 1476 records in r/3 table but i check the table in t-code se11 it is having only 506 records. so can any one help me what are the possible reasons and how to analysis and solve this issue.

If generic datasource based on function module : check how the function module is designed to extract data.
If generic datasource based on table : Check the table in se12 data with same restrictions which you may use in RSA3.
If generic datasource based on view :
Check the view in se12 data with same restrictions which you may use in RSA3.
Hope this helps.

Getting dump with message CALL_FUNCTION_GET_NAME_FAILED

Hi,
My requirement is to write a report which will be run in background every Monday and the result will be sent to a user as email with excel as attachment.
I tried it by giving the email in 'Spool list recipient' in SM36. ut since the length of the output is more than 255 chars, so i thought of writing the email code as shown below.
DATA: l_message_content LIKE soli OCCURS 10 WITH HEADER LINE,
        l_receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
        l_packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
        l_listobject LIKE abaplist OCCURS 10,
        l_compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
        lw_object_hd_change LIKE sood1,
        l_compressed_size LIKE sy-index.
l_receiver_list-recnam = sy-uname .
l_receiver_list-esc_des = 'B'.
APPEND l_receiver_list.
lw_object_hd_change-objla = sy-langu.
lw_object_hd_change-objnam = 'Selection'.
lw_object_hd_change-objsns = 'P'.
Mail subject
lw_object_hd_change-objdes = 'KRB SAP Inconsistency Report'.
Mail body
APPEND 'Consisteny report between KRB and SAP' TO l_message_content.
CALL FUNCTION 'TABLE_COMPRESS'
    IMPORTING
      compressed_size = l_compressed_size
    TABLES
      in              = <fs_table>
      out             = l_compressed_attachment.
DESCRIBE TABLE l_compressed_attachment.
CLEAR l_packing_list.
l_packing_list-transf_bin = 'X'.
l_packing_list-head_start = 0.
l_packing_list-head_num = 0.
l_packing_list-body_start = 1.
l_packing_list-body_num = sy-tfill.
l_packing_list-objtp = 'ALI'.
l_packing_list-objnam = 'Selection'.
l_packing_list-objdes = 'SAP KRB Consistency Report'.
l_packing_list-objlen = l_compressed_size.
APPEND l_packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
    EXPORTING
      object_hd_change = lw_object_hd_change
      object_type      = 'RAW'
      owner            = sy-uname
    TABLES
      objcont          = l_message_content
      receivers        = l_receiver_list
      packing_list     = l_packing_list
      att_cont         = l_compressed_attachment.
I am getting the mail which i checked in SBWP but when i clicked on the attachment i am getting dump with message CALL_FUNCTION_GET_NAME_FAILED.
Short text
    Error when starting a Remote Function Call.
What happened?
    "CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223#CPIC program connection ended (read
     error) "
    An error occurred when executing a Remote Function Call.
Error analysis
    An error occurred when executing a Remote Function Call.
    "CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223#CPIC program connection ended (read
     error) "
    Status of connection.... "RFC DRV=??? ???"
    Internal error code.... "RFC_IO4"
    Internal error: Invalid RFC handle.
Trigger Location of Runtime Error
    Program                                 SAPMSSY1
    Include                                 SAPMSSY1
    Row                                     266
    Module type                             (FORM)
    Module Name                             XAB_RUN_DRIVER
Please help in this.
<removed by moderator>
Edited by: Thomas Zloch on Sep 14, 2011 11:57 AM

Hi,
Check your RFC Connection Configuration. Also, check the used username & password.
Reward points if the asnwer is helpful.
Regards,

Extractor Checker(RSA3)getting DUMP

Similar Messages

Maybe you are looking for