Extractor for ANIA and/or ANKB

Hello Everyone,
I would like to know if there is any SAP delivered BI Content extractor for table ANIA and/or table ANKB.
I've searched everywhere but with no success.
Does anyone have any idea?
Regards,
Diogo.

ANIA has no standard DataSource.
ANIB has no standard DataSource.
I know that currently it is not planned to enhance these standard extraction
functions to integrate simulated WBS element depreciation.
ANKA has no standard DataSource.
ANKB has no standard DataSource.
0FI_AA_005 only takes transactions with entries in ANEK and ANEP.
0FI_AA_006 extracts those transactions which are stored in ANEK, ANEP
and ANEA.
ANLV, ANLK have no standard DataSources.
You will need to create your own generic DataSources, in order to
extract the datas from the tables that have no standard
DataSources.
Colin

Similar Messages

Extractor for AUFK and AFKO tables

Hello Experts,
I am looking for a standard extractor for the tables AUFK (Order Master data) and AFKO (Order Header). I wanted to know if there a exists a standard extractor for the same or I have to create a generic one.
Thanks,
Rishi

For internal orders (ie aufk) have a look at 0COORDER and the transaction data 0CO_OM_OP*
and the rest of the content for IOs
http://help.sap.com/saphelp_nw70/helpdata/en/f2/db0c3c99d56448e10000000a114084/frameset.htm

Extractor for bseg and mbew

hi friends,
may i get a extractor for Standard cost with material no and variance information
plz help me.

Hi ,
Check the below URLs.
Standard datasource for MBEW, MARD & RESB tables
http://help.sap.com/saphelp_nw04/helpdata/en/51/7fe75e107211d48b390000e83234f3/content.htm

Extractors for S530 and S039

Hello Experts,
I plan to create a generic datasource on top of the infostructures S530 and S039. Before I do that, I wanted to confirm is there is a standard LO cockpit extarctor for these structures.
Thanks,
Rishi

Hi,
for S039 there are the standard extractors 2LIS_03_BF and 2LIS_03_UM. S530 is a custom defined infostructure, so you need to create your own datasource for it.
regards
Siggi

Extractors for opening and closing stocks

Hi All
I need to design opening and closing stocks (MOVEMENTS based), are there any standard extractors, cubes & queries.
Any documents (PDF) will be highly appreciated
Regards

Hi,
Check: [How to Handle Inventory Management Scenarios in BW (NW2004)|http://sapbwneelam.blogspot.com/2008/11/how-to-handle-inventory-management.html]
[BI Content - Inventory Management|http://help.sap.com/saphelp_nw04/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm]
Srini

Standard extractor for forecast & consumptions values (prow and mver table)

Hi All,
Is there any SAP BI standard extractor for forecast and consumptions data ?
For information,
ECC6 Forecast table : PROW.
ECC6 Consumptions table : MVER.
Thx.
radj.
Edited by: Radjech Radjech on Jul 27, 2011 11:13 AM
Edited by: Radjech Radjech on Jul 27, 2011 11:25 AM

I have created a generic extractor, in the past, with the FEBEP table. However, my requirement was to join it with the BSID and BSAD tables in order to determine payments that have been received into the lockbox but not cleared, so that the Credit Department has a more up-to-date look at customer accounts.
If you have multiple companies you could end up with a Cartesian product when the data for this view is rendered because the Accounting Document and Fiscal Year don't uniquely identify records in BSEG and BKPF. Additionally, you wouldn't know exactly which Accounting Document Line Item is the correct record on BSEG. Both of these cases are potential sticky points for both a custom view or User Exit in CMOD, unless you've been given by the end customer a way to mitigate these. For instance, you may be able to derive the Company Code for the FEBEP entry by using the Cost Center or Profit Center, unless your Cost Centers or Profit Centers can span across companies.

Two Extractor logics for full and delta?

Hi,
I have a situation where in the logics for full upload and delta uploads are drastically dfifferent!
What is best way to deal it?
shuould i have two different extractors for full and delta ?
Raj

Hi Raj,
I hope that u are working with the Generic Extractors. If the volume of the posting is too high then u need to restrict the data definitely from R3 side interms of the performance. And u need to maintain the Delta Functionality for the same.
If u cannt maintain the Delta from the R3 side then atleast try to restrict the same from BW side at the infopack level where u can extract the data based on the changed on and created with the two different IP's and update the same to the ODS(here make sure all the objects are with the overwrite).... and then u can maintain the Delta load from ODS to the Cube easily..
If the volume of the data is pretty less then u can use Full load to the ODS and then Delta to the Cube.
Thanks
Hope this helps..

CRM Extractors for Product & Customer

Hi Experts,
Iam new to CRM, can any one provide me the extractors for Product and Customer. Here we are trying to extract Product and Customer data from CRM source to BW/BI target, so if i know the extractors for the above it will be really helpful. Also if there is any step by step guide for the same it would be a great help.
Thanks in advance
Shiv

Hi all, this may be too late based on the posted dates, but this is a current issue for me that I have found solution for now and I will post up anyways same thing. There is very little documentation so hopefully this is helpful for whoever else has unique requirements to use this delivered functionality.
Finally I am able to find a solution to this problem and now my system is tracking all status changes and providing me detail conveniantely on duration and time between status changes.
There are some table entries that need to be created plus a couple notes that will help. This applies to people who are not getting any data whatsoever in their CRMD_TSS_DTRACK table or 0CRM_TSS_DTRACK extractor.
Goto transaction --> SMW3FDCUST and make the following entries:
BDoc Type BUS_TRANS_MSG
Context mBDoc Notification (additional calls)
Sequence 50
Service Function CRM_UPLOAD_BW_TSS_DTRACK_SRV
and
BDoc Type BUS_TRANS_MSG
Context mBDoc Notification Multiple (additional calls)
Sequence 50
Service Function CRM_UPLOAD_BW_TSS_DTRACK_SRV
and
BDoc Type BUS_TRANS_MSG
Context mBDoc Initial Load (additional calls)
Sequence 50
Service Function CRM_UPLOAD_BW_TSS_DTRACK_SRV
To also ensure your statuses are being captured after all your configurations have been made, be sure that for these 2 key notes you have the approriate corrections existing in your system:
1024652 - This ensures your custom statuses groups are captured in table and extractor (once you have enhanced it of course)
1239530 - Ensures that all status changes are captured according to your configurations
Thanks.

Extractor for Purchasing Conditions for tables EKKO, EKPO and KONV

Hi Experts,
I want to know if there is an Extractor for Purchasing Conditions with fields in tables of Origin: EKKO, EKPO and KONV.
Or, at least an extractor with the table KONV.
Or, how I can look for it.
Any feedback, will be really apreciated.
Thanks in advance

Hi David,
Adding to what said above.
Observe the Fileds in the Datasources and the details.
http://help.sap.com/saphelp_nw2004s/helpdata/en/5c/8ea0e626e442efb109232830faded9/frameset.htm
Regards,
Ram.

Extractor for CRM service plan and product service letter

Hello:
Is there an extractor for CRM service plan (object type = BUS2000245) and CRM product service letter (object type = BUS2000210)?
The delivered extractor 0CRM_SRV_PROCESS_H only extracts regular service order (object type = BUS2000116). The contract extractor (0CRM_SALES_CONTR_I) only extract contract (object type = BUS2000112).
Any suggestion? Thanks!
Jennifer

Hi Jenifer,
Can you please share me the solution you have implemented.
Thanks in advance
Regards,
Tilak

DataSource for FAGLFLEXT and BSEG, or New Table in ECC6?

need to create an extractor to have all the information of FAGLFLEXT, because we need to keep the ledger information and the split of the information. However, we need to add 13 fields contained in BSEG.
Therefore we thought to reads the line items table FAGLFLEXA, and then enhace it throught BSEG table.
However, since we are using ECC6 and BI7. It is not support the creation of DataSources for FAGLFLEXA throught FAGLBW03.
Is it an option to incorporate all fields into FAGLFLEXT.
Can we creat a new table group based on FAGLFLEXT, and then adding the coding block extensions to that table -
how does new g/l and the new table group work in parallel? Which is the procedure to do it?
Documentation says we can create a new table group based on FAGLFLEXT --- its the how does it work in conjuction part...for example...the new g/l handles document splitting and one other thing georg referenced last night...will the split documents go into our new table group?
BSEG does not have the document splitter information that we need (it's incomplete data). It's missing profit centers on many items, it's missing the proper split of transactions.
Thanks for your comments.

Here is more information about this post.
Client situation: Our client is implementing ECC 6 and is using the "New-GL" features. Because of business requirements, the coding block has been extended (not insignificantly - 18 extra fields at the moment) to accommodate legal, regulatory and management reporting. The reporting solution includes standard ECC reporting (e.g. report writer, report painter reports) as well as feeds to BW (BI 7).
The Challenge: Our understanding is that adding all of the coding block extensions to the New-GL tables (ie. FAGLFLEXA and FAGLFLEXT) may lead to performance degradation in the ECC system. However, we still need to accommodate the requirement to report by the additional dimensions that are not currently included in the New-GL, so our challenge has been to find a solution that minimizes performance issues, while still allowing us to have all the necessary dimensions with which to do the required reporting.
What we would like to know: How have you handled this in similar situations?
Have you added to the New-GL tables? How many fields? Performance issues encountered?
Have you created additional table group(s) based on the New-GL and then modified that structure to have the new fields? How does the additional table group work co-incident with New-GL (e.g. does the additional table group receive document splitting information?)?
Have you created custom extractors for BW? On what basis (we understand that FAGFLEXA cannot be created as a datasource to feed BW)?

Is there any standard extractor for AFD provided by SAP?

Hi.
We are planning to implement SEM-BCS ? From this forum and SAP documentation( help.sap.com and service.sap.com), I just found that integration with ECC is total records(RFD) and some master data. Unfortunately, I could't find any further integration point. AFD such as inventory balance, Gross profit etc seems to be extracted from ECC such as FI, MM or CO module. But there is no mention in SAP documentation.
I think I missed good integration point SAP provided.
Otherwise, We have to develop the some program to extract AFD. Is my understanding correct?
Is there anybody who has experience to extract AFD from ECC with standard extractor or CBO program?

The main problem with automatical load of AFD is the strict dependence on the ECC/R/3 configurations that might differ very significantly.
So, there is no standard extractors for AFD.
IPI - I used to figure out the ways of calculating the figures needed for IPI with non-standard functionality. And understood that even with a standard functionality the task of extracting the proper values are not esy at all.
IPA - there are so much data that needed to be entered for IPA, plus FI-AA configuration depends on implementation...
CoI - the most of data for it is accessible in ECC, even in RFD.
So, forget about the standard and easy way of extracting the data needed. Try to examine the configuration of modules you are interested in, and find the ways to extract the data.

BW Extractor for FS10N Repot

Hello all,
I have seen few threads on BW extractors for FS10N report.
I would like to know which is the best BW extractor to use for FS10N report.
Is it 0FI_GL_4 or 0FI_GL_10 or 0FI_GL_1? Could anyone please suggest.
Thanks,
Praveen Tati

Thank you Murali.
The table FAGL_ACTIVEC has no entries in ECC. I assume it is not active.
I will use 0FI_GL_4 extractor and enhance as per the requirement.
Could you please tell me what setting I need to do to get latest delta's when I run data load from BW?
I understand that I need to do some settings in tables BWOM_SETTINGS, BWOM2_TIMEST.
Thank you very much.
Praveen
Edited by: Praveen Tati on Jun 17, 2011 11:12 PM

How to find R/3 table for FI and PS Datasources

Hi,
Can anyone tell me that how can we find SAP tables for FI and PS datasources in BI. Please provide information as it is urgent. Points will be assigned
Thanks
Shanthi

Hi,
To find DS assigned to a table.
How to find the Datasources for the given table names ?
How to find the Datasources for the given table names ?
To find Tables assigned to a DS.
USe Extractor Checker RSA3. Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
retrieve data and present it to you.
Note: Set the break point in the Extractor Function module.
View the ST05 Extended Trace list. The Object name shows the Tables accessed.
Thanks,
JituK

Extractor for payroll reads data from cluster PCL2?

Hello all,
This is the line from help.sap in payroll extractor.
"The extractor for payroll results reads data from payroll cluster PCL2, not from standard tables."
Can someone explain to me what do we have to understand from that, and where in R/3 do we have to go and check for data.
Thanks in advance.

Anytime some of last information does not upload in delta to BW from payroll because payroll has a process to close it had to be executed (or something like that (sorry, i haven't enough funcional HR knoledge), it happened to me anytime).
But, surely the user that you are using for extraction has no enought rights or authorizations.
Look at these notes
397208 **** very important!!!
672514
964569
329961
585682

Extractor for ANIA and/or ANKB

Similar Messages

Maybe you are looking for