Extractor for bseg and mbew
hi friends,
may i get a extractor for Standard cost with material no and variance information
plz help me.
Hi ,
Check the below URLs.
Standard datasource for MBEW, MARD & RESB tables
http://help.sap.com/saphelp_nw04/helpdata/en/51/7fe75e107211d48b390000e83234f3/content.htm
Similar Messages
-
Extractor for AUFK and AFKO tables
Hello Experts,
I am looking for a standard extractor for the tables AUFK (Order Master data) and AFKO (Order Header). I wanted to know if there a exists a standard extractor for the same or I have to create a generic one.
Thanks,
RishiFor internal orders (ie aufk) have a look at 0COORDER and the transaction data 0CO_OM_OP*
and the rest of the content for IOs
http://help.sap.com/saphelp_nw70/helpdata/en/f2/db0c3c99d56448e10000000a114084/frameset.htm -
Extractor for ANIA and/or ANKB
Hello Everyone,
I would like to know if there is any SAP delivered BI Content extractor for table ANIA and/or table ANKB.
I've searched everywhere but with no success.
Does anyone have any idea?
Regards,
Diogo.ANIA has no standard DataSource.
ANIB has no standard DataSource.
I know that currently it is not planned to enhance these standard extraction
functions to integrate simulated WBS element depreciation.
ANKA has no standard DataSource.
ANKB has no standard DataSource.
0FI_AA_005 only takes transactions with entries in ANEK and ANEP.
0FI_AA_006 extracts those transactions which are stored in ANEK, ANEP
and ANEA.
ANLV, ANLK have no standard DataSources.
You will need to create your own generic DataSources, in order to
extract the datas from the tables that have no standard
DataSources.
Colin -
Regarding BW standard extractor for material valuation ( MBEW and MBEWH )
Hi All
I would like to extract data from MBEW and MBEWH tabels to get material valuation information. Is there any standard extractor avaiable to fect this this information to BW? I have seacrhed forums , some one suggested to use 0CO_PC_ACT_05 extractor but they have also mentioned it would not fetct data from history table MBEWH table. I need to extract full information based on both the tabels for all the years.
Is there any extractor available?
Please advise
Thanks
VennelaHi Vennela:
We did not use any DSO from standard content. We created a custom write optimized DSO with the same key fields as MBEW.
We do a delete data and full reload every night.
Then we load 0MATPLANT from the DSO.
We also do a currency conversion to convert all prices to USD and load a custom attribute of 0MATPLANT to hold USD prices.
These material prices will get over written every day with the current valuation for that day.
Thats our data flow.
We did not have a requirement to hold history from MBEWH. you might be able to hold history within BW if you load the data into another DSO with a extra key field for the system date of the day you are loading data for.
Hope this helps.
Good Luck.
MP. -
Hello Experts,
I plan to create a generic datasource on top of the infostructures S530 and S039. Before I do that, I wanted to confirm is there is a standard LO cockpit extarctor for these structures.
Thanks,
RishiHi,
for S039 there are the standard extractors 2LIS_03_BF and 2LIS_03_UM. S530 is a custom defined infostructure, so you need to create your own datasource for it.
regards
Siggi -
Extractors for opening and closing stocks
Hi All
I need to design opening and closing stocks (MOVEMENTS based), are there any standard extractors, cubes & queries.
Any documents (PDF) will be highly appreciated
RegardsHi,
Check: [How to Handle Inventory Management Scenarios in BW (NW2004)|http://sapbwneelam.blogspot.com/2008/11/how-to-handle-inventory-management.html]
[BI Content - Inventory Management|http://help.sap.com/saphelp_nw04/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm]
Srini -
Standard extractor for forecast & consumptions values (prow and mver table)
Hi All,
Is there any SAP BI standard extractor for forecast and consumptions data ?
For information,
ECC6 Forecast table : PROW.
ECC6 Consumptions table : MVER.
Thx.
radj.
Edited by: Radjech Radjech on Jul 27, 2011 11:13 AM
Edited by: Radjech Radjech on Jul 27, 2011 11:25 AMI have created a generic extractor, in the past, with the FEBEP table. However, my requirement was to join it with the BSID and BSAD tables in order to determine payments that have been received into the lockbox but not cleared, so that the Credit Department has a more up-to-date look at customer accounts.
If you have multiple companies you could end up with a Cartesian product when the data for this view is rendered because the Accounting Document and Fiscal Year don't uniquely identify records in BSEG and BKPF. Additionally, you wouldn't know exactly which Accounting Document Line Item is the correct record on BSEG. Both of these cases are potential sticky points for both a custom view or User Exit in CMOD, unless you've been given by the end customer a way to mitigate these. For instance, you may be able to derive the Company Code for the FEBEP entry by using the Cost Center or Profit Center, unless your Cost Centers or Profit Centers can span across companies. -
Two Extractor logics for full and delta?
Hi,
I have a situation where in the logics for full upload and delta uploads are drastically dfifferent!
What is best way to deal it?
shuould i have two different extractors for full and delta ?
RajHi Raj,
I hope that u are working with the Generic Extractors. If the volume of the posting is too high then u need to restrict the data definitely from R3 side interms of the performance. And u need to maintain the Delta Functionality for the same.
If u cannt maintain the Delta from the R3 side then atleast try to restrict the same from BW side at the infopack level where u can extract the data based on the changed on and created with the two different IP's and update the same to the ODS(here make sure all the objects are with the overwrite).... and then u can maintain the Delta load from ODS to the Cube easily..
If the volume of the data is pretty less then u can use Full load to the ODS and then Delta to the Cube.
Thanks
Hope this helps.. -
Data Source for BSEG Data base table
Hi Every one,
I need to create a data source for the data base table BSEG (Function Module Extraction).
I have followed below steps.
I have created extarct structure which contains all the fields of BSEG Data base table.If I save the data source I am getting error.
If I remove all the currecy fields from extract structure, I am able to activate the data sorce.
So Could you please explain me how to extract currency fields.Hi,
Firstly, can you explain why you need a generic extractor for BSEG? There are already 2 datasources for BSEG, they are:
0FI_GL_4
http://help.sap.com/saphelp_nw70/helpdata/en/0c/b4973c115a6f3ae10000000a114084/frameset.htm
0FI_GL_14
http://help.sap.com/saphelp_nw70/helpdata/en/49/5700570223413085021a8b4ef1087a/frameset.htm
To use 0FI_GL_14, you should use the new GL in ECC side.
On the other hand, for your problem, your problem may occur if you did not give the reference unit field of your currency field in your extraction structure. when you double click the the currency field, you will see the ref. field, give the reference unit field in this area.
Regards. -
CRM Extractors for Product & Customer
Hi Experts,
Iam new to CRM, can any one provide me the extractors for Product and Customer. Here we are trying to extract Product and Customer data from CRM source to BW/BI target, so if i know the extractors for the above it will be really helpful. Also if there is any step by step guide for the same it would be a great help.
Thanks in advance
ShivHi all, this may be too late based on the posted dates, but this is a current issue for me that I have found solution for now and I will post up anyways same thing. There is very little documentation so hopefully this is helpful for whoever else has unique requirements to use this delivered functionality.
Finally I am able to find a solution to this problem and now my system is tracking all status changes and providing me detail conveniantely on duration and time between status changes.
There are some table entries that need to be created plus a couple notes that will help. This applies to people who are not getting any data whatsoever in their CRMD_TSS_DTRACK table or 0CRM_TSS_DTRACK extractor.
Goto transaction --> SMW3FDCUST and make the following entries:
BDoc Type BUS_TRANS_MSG
Context mBDoc Notification (additional calls)
Sequence 50
Service Function CRM_UPLOAD_BW_TSS_DTRACK_SRV
and
BDoc Type BUS_TRANS_MSG
Context mBDoc Notification Multiple (additional calls)
Sequence 50
Service Function CRM_UPLOAD_BW_TSS_DTRACK_SRV
and
BDoc Type BUS_TRANS_MSG
Context mBDoc Initial Load (additional calls)
Sequence 50
Service Function CRM_UPLOAD_BW_TSS_DTRACK_SRV
To also ensure your statuses are being captured after all your configurations have been made, be sure that for these 2 key notes you have the approriate corrections existing in your system:
1024652 - This ensures your custom statuses groups are captured in table and extractor (once you have enhanced it of course)
1239530 - Ensures that all status changes are captured according to your configurations
Thanks. -
DataSource for FAGLFLEXT and BSEG, or New Table in ECC6?
need to create an extractor to have all the information of FAGLFLEXT, because we need to keep the ledger information and the split of the information. However, we need to add 13 fields contained in BSEG.
Therefore we thought to reads the line items table FAGLFLEXA, and then enhace it throught BSEG table.
However, since we are using ECC6 and BI7. It is not support the creation of DataSources for FAGLFLEXA throught FAGLBW03.
Is it an option to incorporate all fields into FAGLFLEXT.
Can we creat a new table group based on FAGLFLEXT, and then adding the coding block extensions to that table -
how does new g/l and the new table group work in parallel? Which is the procedure to do it?
Documentation says we can create a new table group based on FAGLFLEXT --- its the how does it work in conjuction part...for example...the new g/l handles document splitting and one other thing georg referenced last night...will the split documents go into our new table group?
BSEG does not have the document splitter information that we need (it's incomplete data). It's missing profit centers on many items, it's missing the proper split of transactions.
Thanks for your comments.Here is more information about this post.
Client situation: Our client is implementing ECC 6 and is using the "New-GL" features. Because of business requirements, the coding block has been extended (not insignificantly - 18 extra fields at the moment) to accommodate legal, regulatory and management reporting. The reporting solution includes standard ECC reporting (e.g. report writer, report painter reports) as well as feeds to BW (BI 7).
The Challenge: Our understanding is that adding all of the coding block extensions to the New-GL tables (ie. FAGLFLEXA and FAGLFLEXT) may lead to performance degradation in the ECC system. However, we still need to accommodate the requirement to report by the additional dimensions that are not currently included in the New-GL, so our challenge has been to find a solution that minimizes performance issues, while still allowing us to have all the necessary dimensions with which to do the required reporting.
What we would like to know: How have you handled this in similar situations?
Have you added to the New-GL tables? How many fields? Performance issues encountered?
Have you created additional table group(s) based on the New-GL and then modified that structure to have the new fields? How does the additional table group work co-incident with New-GL (e.g. does the additional table group receive document splitting information?)?
Have you created custom extractors for BW? On what basis (we understand that FAGFLEXA cannot be created as a datasource to feed BW)? -
Business content referring RESB and MBEW tables for MM
Hi Gurus,
I have a requirement where i need to extract data from RESB and MBEW tables.
Is there any business content extractor which takes data from these tables. or the data can be compensated from other tables like EKBE,EKKO,EKPO or MSEG. please let know. Help or advice is greatly appreciated. Thanks in advance.
Regards,
SatishYou'll have to use 0CO_PC_ACT_05 (Material Valuation: Prices) for MBEW note that it doesn't support delta.
For RESB you might look at 0PS_COMPONT_ATTR, but I'm not really shure
Message was edited by:
Pabloj -
JOIN for BSEG, BSIS, BSAS, MSEG, BKPF and MKPF
I am developing a report related to G/L . i am using the Tables BSEG BSIS BSAS MSEG BKPF MKPF ............please give me the Joinings of these tables.......how exactly we can join and get the prefect Data....
Thank U waiting for ur replies....
Title edited by: Alvaro Tejada Galindo on Jun 3, 2008 3:41 PMI have given the tables, internal tables and the select queries which can give you the join conditions of your requirement.
tables: bsis,
bsas,
bkpf,
bseg,
ekbe,
mkpf,
mseg.
select-options: s_hkont for bseg-hkont,
s_bldat for bkpf-budat,
s_budat for bkpf-bldat obligatory,
s_lifnr for bseg-lifnr,
s_lfbnr for ekbe-lfbnr no intervals no-extension.
data: begin of i_bsis_bsas occurs 0,
bukrs like bsis-bukrs,
hkont like bsis-hkont,
gjahr like bsis-gjahr,
belnr like bsis-belnr,
budat like bsis-budat,
bldat like bsis-bldat,
xblnr like bsis-xblnr,
wrbtr like bsis-wrbtr,
buzei like bsis-buzei,
end of i_bsis_bsas,
begin of i_bkpf occurs 0,
bukrs like bsis-bukrs,
belnr like bsis-belnr,
gjahr like bsis-gjahr,
xblnr like bkpf-xblnr,
stblg like bkpf-stblg,
awtyp like bkpf-awtyp,
tcode like bkpf-tcode,
end of i_bkpf,
begin of i_bseg occurs 0,
bukrs like bsis-bukrs,
belnr like bsis-belnr,
gjahr like bsis-gjahr,
buzei like bseg-buzei,
buzid like bseg-buzid,
koart like bseg-koart,
zuonr like bseg-zuonr,
hkont like bseg-hkont,
lifnr like bseg-lifnr,
sgtxt like bseg-sgtxt,
ebeln like bseg-ebeln,
ebelp like bseg-ebelp,
wrbtr like bseg-wrbtr,
end of i_bseg,
begin of i_ekbe occurs 0,
ebeln like ekbe-ebeln,
ebelp like ekbe-ebelp,
gjahr like ekbe-gjahr,
belnr like ekbe-belnr,
buzei like ekbe-buzei,
lfgja like ekbe-lfgja,
lfbnr like ekbe-lfbnr,
lfpos like ekbe-lfpos,
matnr like ekbe-matnr,
end of i_ekbe,
begin of i_mkpf_mseg occurs 0,
mblnr like mkpf-mblnr,
mjahr like mkpf-mjahr,
bktxt like mkpf-bktxt,
xblnr like mkpf-xblnr,
frbnr like mkpf-frbnr,
zeile like mseg-zeile,
matnr like mseg-matnr,
erfmg like mseg-erfmg,
end of i_mkpf_mseg.
*data: wa_ekbe like i_ekbe.
select bukrs
hkont
gjahr
belnr
budat
bldat
xblnr
wrbtr
buzei appending corresponding fields of table i_bsis_bsas
from bsis
where bukrs eq p_bukrs
and hkont in s_hkont
and gjahr eq p_gjahr
and budat in s_budat
and shkzg eq 'S'.
select bukrs
hkont
gjahr
belnr
budat
bldat
xblnr
wrbtr appending corresponding fields of table i_bsis_bsas
from bsas
where bukrs eq p_bukrs
and hkont in s_hkont
and gjahr eq p_gjahr
and budat in s_budat
and shkzg eq 'S'.
endform. " f_get_bsis_bsas_data
*& Form f_get_bkpf_bseg_data
Subroutine to get BKPF and BSEG data
form f_get_bkpf_bseg_data.
check not i_bsis_bsas[] is initial.
select bukrs
belnr
gjahr
xblnr
stblg
awtyp
tcode into table i_bkpf
from bkpf
for all entries in i_bsis_bsas
where bukrs eq i_bsis_bsas-bukrs
and belnr eq i_bsis_bsas-belnr
and gjahr eq i_bsis_bsas-gjahr.
and awtyp = 'BKPFF'
and tcode = 'J1IE'.
check not i_bkpf[] is initial.
select bukrs
belnr
gjahr
buzei
buzid
koart
zuonr
hkont
lifnr
sgtxt
ebeln
ebelp
wrbtr into corresponding fields of table i_bseg
from bseg
for all entries in i_bsis_bsas
where bukrs eq i_bsis_bsas-bukrs
and belnr eq i_bsis_bsas-belnr
and gjahr eq i_bsis_bsas-gjahr.
and buzei eq i_bsis_bsas-buzei
and hkont eq i_bsis_bsas-hkont.
delete i_bseg where not hkont in s_hkont.
endform. " f_get_bkpf_bseg_data
*& Form f_get_ekbe_data
Subroutine to get EKBE data
form f_get_ekbe_data.
data: $i_bseg like i_bseg occurs 0 with header line.
$i_bseg[] = i_bseg[].
delete $i_bseg where ebeln is initial.
check not $i_bseg[] is initial.
select ebeln
ebelp
gjahr
belnr
buzei
lfgja
lfbnr
lfpos
matnr into table i_ekbe
from ekbe
for all entries in $i_bseg
where ebeln eq $i_bseg-ebeln
and ebelp eq $i_bseg-ebelp
and gjahr eq $i_bseg-gjahr
and bwart = '101'.
and belnr eq $i_bseg-belnr.
check not i_ekbe[] is initial.
select a~mblnr
a~mjahr
a~bktxt
a~xblnr
a~frbnr
b~zeile
b~matnr
b~werks
b~erfmg into table i_mkpf_mseg
from mkpf as a inner join
mseg as b on amblnr eq bmblnr
and amjahr eq bmjahr
for all entries in i_ekbe
where a~mblnr eq i_ekbe-lfbnr
and a~mjahr eq i_ekbe-gjahr
and b~zeile eq i_ekbe-lfpos
and b~werks eq p_werks.
<REMOVED BY MODERATOR>
Edited by: Srikanth Kadiyala on Jun 3, 2008 7:24 AM
Edited by: Alvaro Tejada Galindo on Jun 3, 2008 3:40 PM -
Extractor for Purchasing Conditions for tables EKKO, EKPO and KONV
Hi Experts,
I want to know if there is an Extractor for Purchasing Conditions with fields in tables of Origin: EKKO, EKPO and KONV.
Or, at least an extractor with the table KONV.
Or, how I can look for it.
Any feedback, will be really apreciated.
Thanks in advanceHi David,
Adding to what said above.
Observe the Fileds in the Datasources and the details.
http://help.sap.com/saphelp_nw2004s/helpdata/en/5c/8ea0e626e442efb109232830faded9/frameset.htm
Regards,
Ram. -
Idoc for bsid ,bseg and bkpf tables
hi ,
i have extrated the data from 4.7 and uploading into ecc 6.0.
is there any IDOC for uploading data coming from BSID , BSEG AND BKPF tabels?
i checked bapi , i could not find some fields in bapi .pls.advise if any IDOC
As it is very urgent , pls.help me in this regard .
Regards ,
Kiran.Hi,
There is some IDOCs which related to the bseg, bkpf etc table
FIDCC1,FIDCC2.
<b>Reward with points if helpful.</b>
Regards,
Vijay
Maybe you are looking for
-
When trying to post to Facebook it won't from Safari. Worked perfect up until last night.
-
Adding work order short text to KSBB report
Presently, our budget administrator runs various KSBB reports for showing budget/actuals. For instance, you run the report <i>Plan/Actual Comparisons -> Additional Ratios -> Cost Centers: Act./Plan/Commitments</i>. Then you drill down into the actua
-
I share my itune account with 2 other people. that way we share music and apps can I use the same ID for both my icloud and the Itune account and use different passwords so the other people don't have access to my personal emails etc on icloud???? t
-
Trouble with my Adobe Web Premium license
Hello, I asked for assistance a couple of weeks ago, and got an answer that 1/2 way solved my problem. So I'm looking for help to get me all the way there. For background, my original issue was: I recently purchased a new Macbook Air. My other comput
-
BW authorizations at report level
hi, i have a requirement to restict user's access to certain cost centers on a report. i have created a new authorization object and switched on the reporting authorization on the cube for this object. i have created an authorization variable and thi