Extractor for FLEET table

I need to extract some fields from the table FLEET, does any of you know if there's already a standard extractor for that?
Otherwise I may need to enhance an existing one or create my own. If so, can you suggest any ideas about how to link the data?
If I have to enhance, I was thinking about using 2LIS_08TRFKZ and add the missing fields there. Is this the right approach?

HI,
Enter this table name in SE11 ->Display->Where-Used-List->Select Stuctures, Includes, Programs etc...
Get into ROOSOURCE table, Select A in OBJVERS, Extraction details etc..You will come to know about any Standard Extractor.
I have no idea about your second question.
Regards,
Suman

Similar Messages

  • Standard extractor for ECC table BFOD_A

    Dear Gurus,
    Do we have any standard extractor delivered by sap to extract data from ECC table "BFOD_A".
    Also this table does not have any timestamp field..so in case we create generic datasource on this table how to do we extract delta.
    Thanks,
    Sandeep

    As far as I know there is no standard extractors for this table. You are trying to get AR by Profit Center information? The FI consultant had tried adding a timestamp field but unfortunately the customized program is not 100% correct (as we have missing data in delta). So we just created a generic extractor on this table and perform weekly full load until the customized program got fix.

  • BW DS Extractors for FI Tables

    Hi everybody,
    can anybody please tell me the standard extractors (BW Datasources) for following tables
    - GLT3
    - GLPCT
    - FAGLFLEXT
    Thanks a lot

    hello,
    For GLPCT:
    data-/info source 0EC_PCA_1. The cube is 0PCA_C01.
    For GLT3 :
    3FI_SL_09_TT
    or
    check the DS 3EC_CS1A.It is giving the data as like data there in table GLT3.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/6c/4d6637a04c2367e10000009b38f8cf/frameset.htm
    For FAGLFLEXT :
    0FI_GL_10 extracts data from FAGLFLEXT table, that is connected to DSO (0FIGL_O10) --> Cube (0FIGL_C10) --> Virtual Cube (0FIGL_V10) and u will all the standard reports from there
    Reagrds,
    Dhanya

  • How to find extractor for KAEP_COAC table

    Hi,
    I'm looking for an extractor which will held below given fields from KAEP_COAC table and if you could give me an extractor that keeps that table.
    regards
    KAEP_COAC     AUFNR
    KAEP_COAC     WRGBTR
    KAEP_COAC     MAT_TXT
    KAEP_COAC     MBGBTR
    KAEP_COAC     BLTXT
    KAEP_COAC     KSTAR
    KAEP_COAC     GKONT_KTXT
    KAEP_COAC     CEL_LTXT
    KAEP_COAC     MEINB
    KAEP_COAC     BLART
    KAEP_COAC     MATNR
    KAEP_COAC     POBID

    Hi
    Please refer the link below.
    Re: How to bring KSB1 report data from R/3 to BW
    standard datasource is not available either you need to enhance a datasource 0CO_OM_CCA_9 or create a zdatasource using the structure  KAEP_COAC.
    Thanks

  • How to find an extractor for a table

    If I know the data I want to load into BW is in a specific table in R3, i.e. PA0014, what technique do I use to see if there is a Business Content extractor that will give me the data I want?

    Hi,
    PA0008 HR Master Record: Infotype 0008 (Basic Pay)
    PA0014 HR Master Record: Infotype 0014 (Recur. Payments/Deds.)
    PA0015 HR Master Record: Infotype 0015 (Additional Payments)
    PA0045 HR Master Record: Infotype 0045 (Company Loans)
    cubes :
    1) Payroll Data 0PY_C02
    2) Benefits 0PABN_C01
    Basic pay detals comes from Payroll data Cube by a specfic wage type.others thing from Benefits cube by different Benefit areas
    Pls try to use the standard business Content datasource 0HR_PY_1 and infosource 0HR_PY_1.
    Pls chk this link.
    http://help.sap.com/saphelp_nw04/helpdata/en/2a/77eb3cad744026e10000000a11405a/frameset.htm
    Also take a look BI best practice -> http://help.sap.com/bp_biv235/BI_EN/html/bw.htm -> human capital management
    http://help.sap.com/bp_biv335/BI_EN/html/bw.htm
    Hope this helps
    regards
    CSM reddy

  • Extractor for table S115

    Hi,
    Im looking for a standar extractor that can obtain the information that i have in the table s115 of R/3; or its necessary to create an extractor generic?
    Thanks for the information
    Mónica

    Hi
    just create a generic extractor for this table.
    http://help.sap.com/saphelp_nw04/helpdata/en/37/4f3ca8b672a34082ab3085d3c22145/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
    Reg's
    Edan

  • Extractor for AUFK and AFKO tables

    Hello Experts,
    I am looking for a standard extractor for the tables AUFK (Order Master data) and AFKO (Order Header). I wanted to know if there a exists a standard extractor for the same or I have to create a generic one.
    Thanks,
    Rishi

    For internal orders (ie aufk) have a look at 0COORDER and the transaction data  0CO_OM_OP*
    and the rest of the content for IOs
    http://help.sap.com/saphelp_nw70/helpdata/en/f2/db0c3c99d56448e10000000a114084/frameset.htm

  • Std Extractor for table EQKT

    Can someone help me in finding the sap std extractor for the table EQKT (Equipment short texts table). I need to extract the info from the field EQKTU.
    -Tagz

    Krishna,
    To the best of my knowledge there is no standard delivered extractor for table EQBS. Try and understand the functionality of the data stored in the table and its relationships to what is specified in requirement. Is the field required in the master data of equipment or some other transaction data? Depending on the scenario you may have to enhance the master data / transaction data extractor or may be if situation warrants you may have to create a generic extractor.
    General procedure employed in finding extractors is to know what type of data is requested, which functional area then check the standard extractors in that specific application component to see if any of the extractors delivered provide the data required. Check help documentation of the extractors.

  • Extractor for tbl CABN

    Hi ,
    Could someone tell me the std extractor for table CABN or how to find the extractor for the table.
    Thanks
    Jay.

    Hi dear,
    look at 0CRM_MKTATTR_ATTR
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8d/4cb2188716e8428c84bef5140d19d1/content.htm
    Hope it helps!
    Bye,
    Roberto

  • Extractor for A016

    Is there a business content extractor for A016 table in R/3?  If not has anyone had experiance writing a custom extractor on this table?
    Thanks,
    MG

    HI,
    There is no business content extractor available for the pooled table A016. You have to write a custom extractor for this.
    Refer:
    [Customising Extractors|http://help.sap.com/saphelp_nw04/helpdata/en/7a/27bcf087c7464db8b95eaa717b6e6a/frameset.htm]
    Defining Custom Extractor
    Custom Extractors
    Regards,
    Habeeb

  • Standard extractor for RBKP:Document Header: Invoice Receipt?

    Hi gurus,
    I need to extract from the table RBKP. Is there a standard extractor for this table? If not, what table joins would be best to create a generic extractor?
    Thanks !
    Chirayu

    Hi Chris,
    Check to see if this would be useful:
    http://help.sap.com/saphelp_nw70/helpdata/en/57/dad06449114814919000e27dfb255e/content.htm
    Hope this helps...

  • Is there a Bdoc for CRMD_LINK table?

    Is there a Bdoc for CRMD_LINK table?
    BR

    Hello Fang,
    As far as i know, there is no standard extractor for this table. I belive you have to build a new onebased on it.
    Thanks
    Raja Pamireddy
    CRM Marketing forum Moderator

  • BI extractor for hr

    Hi,
    Anyone know the BI standard extractor for HRHAP tables
    Thanks
    Bala

    Hi,
    please check the below tables
    PA2001, PA2007, PA2001, PA2002, PA2003
    data sources for HR
    0EMPLOYEE_ATTR
    0PERSON
    0HRPOSITION
    0JOB
    0ORGUNIT
    0COMPCODE
    0HR_PA_0
    0HR_PA_1
    Thanks,
    Phani.

  • Extractor For AFS System [ Table /AFS/MARM & /AFS/MWKE & /AFS/MLGN2 ]

    Hi Guru,
    Exist a Extractor Standard for this table? for exmple i thinking for /AFS/MARM ( 0MAT_UNIT ?? )
    I would like to implement a delta extractor using one of the usual method, for exmple by reading the table ( CDPOS / CDHR ) or using the BTE ( Transactio Event ) .
    I accept any kind of suggestion, in particular if someone has already implemented a possible solution.
    Regards
    Max

    Hi
    why do want to select the data from PSA table ?Already your trying to load data from PSA to DSO.
    you want to populate the AFS field value in DSO right?
    1. First you have to add AFS field in ur DSO
    2. Write the Start routine based on ur scenario(select the data based on ur scenario and put into internal table).
    3. wirte AFS field leval  transfer routine(Read the corresponding record based on docu num,item num) pass into RESULT.
    Regards,
    GR

  • Extractor for table COBRB

    Hello Experts,
    I am looking for a BC-extractor for table COBRB containingt hese fields:
    OBJNR, BUREG, LFDNR, PERBZ, URZUO, GABJA, GABPE, GBISJ, GBISP, PROZS, AVORG, KONTY, KOKRS, BUKRS, HKONT, NLN1, ANLN2, MATNR, REC_OBJNR1.
    Any idea?
    We need the relation between COORDER and the valid HKONT for a certain moment.
    As it is possible to have more than 1 HKONT (with different percentages and in time) I guess it is a different extractor than 0COORDER_ATTR and it can not just added to this ectractor.
    Thanks in advance,
    Udo

    Hi,
    Enter your table name in SE11 in ECC.
    Click Where-Used-List
    Select Structures, Programs etc., then it will show the entire info.
    Regards,
    Suman

Maybe you are looking for

  • Two payroll run for employee in same month

    Hello Experts, Iam having one issue.Client requirement is,if a employee get transferred to other location in mid of the month,in that case his payroll should run say 15 days for previous location & 15 days for new location.Client says since ESI will

  • Docked iPod only outputs sound during video to TV

    I have a 5G iPod in an Apple dock, connected to my TV using a Monster audio cable and an S-Video cable. For some reason, it only outputs sound during videos or a photo slide show - not at all for music only playback. I'm baffled! Any idea why? It's a

  • Error in function module BAPI_ACTIVITYCRM_SAVE

    Hi friends, I am useing the bapi BAPI_ACTIVITYCRM_CHANGEMULTI and with this bapi i want to change the status . inm retun parmeter of the bapi BAPI_ACTIVITYCRM_CHANGEMULTI i am geting sussful and after this i am using the bapi BAPI_ACTIVITYCRM_SAVE  w

  • Please help EJB-QL with

    select Terminal = CASE WHEN a.Terminal IS NULL THEN CASE WHEN c.region='new' or c.company ='Sun' THEN 'J' ELSE ' P' END ELSE a.Terminal END ,c.*, p.port FROM Customer c LEFT JOIN (select a.Terminal, c2.region from tableTerminal a join customer c2 on

  • Partial trigger and required field

    We developed an ADF JSF application which some of field has partial trigger . Then we add some required field. when runtime when we change any partial trigger target item all field validated and "required field missing message" occurs. How can we pre