Extractor for Material Characteristics - Variants
Hello Gurus,
There are few characteristics that we have configured in ECC system for Materila. If you go to MM01 or MM03-> BASIC DATA 2 -> Client Specific configuration -> There is an option of creating a Cross-Plant CM. You can create additional characteristics once you click the Configure Variant button. There are values that are assigned to the Characteristic Value Assignment.
I would like to know is there a Standard Extractor, that gets these characteristics.
Thanks in advance
Full points to right answers
Thanks for your reply again.
The following are the parameters:-
Basis Datasource : 0MATERIAL_ATTR
Client: 100
Class Type: 001 (Material Class) It does not allow me to select any other class
Obj Table: MARA
Datasource Type: ATTR
Datasource : 1CL_OMAT001
And then I double click on characteristic, to add my characteristics.
The system generates a TEXT DATASOURCE for individual text characteristics, which when using RSA3 gets the relevant data.
But when I execute the datasource 1CL_OMAT001, it does not retrieve any data.
Just to clarify: The SBIW node says "Maintain Data Sources for Classification Data".
Does it mean, it will extract data from the CLASSIFICATION tab of the MM03.
B'cas I am interested in the "BASIC DATA 2" tab -> Client Specific Config-> Configure Variant (button).
Thanks
Similar Messages
-
Idoc for material characteristics
Hi Friends,
I know the IDoc message type for material batch characteristics (SKU_COLOR , SKU_SIZE , SKU_WINDOW, etc.,) is CLFMAS. Does anybody know the message and basic type for Material characteristics (ART_WIDTH , ART_DEPTH , ART_HEIGHT, etc.,) ?
Regards,
Dikshitha GHi,
You need to do the ALE confguration for change pointers of materials to trigger the idoc. Please search in SCN , you will find information reagrding change pointers of Idoc.
Regards,
Nagaraj -
CO-PA generated extractors for custom characteristics
Hi, gurus!
I have user-defined (transaction KEA5) characteristic WWVD in CO-PA. This char. has some values defined (transaction KES1). Values grouped in user-defined hierarchy (transaction KES3). Characteristic WWVD used in some Operating Concern. When I generate CO-PA extractor for the Operating Concern, I got generated extractors for characteristic WWVD - 0G_CWWVD_TXT. Everything is fine.
Question: is there any way to generate extractor for user-defined hierarchy for characteristic WWVD? or I should create it by myself as generic datasource or somehow else?
Thanks,
Andrew.hi andrew
u can use link to see document on How to COPA.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how to co-pa extraction 3.0x
hope it helps.
assign the points if it works. -
Regarding BW standard extractor for material valuation ( MBEW and MBEWH )
Hi All
I would like to extract data from MBEW and MBEWH tabels to get material valuation information. Is there any standard extractor avaiable to fect this this information to BW? I have seacrhed forums , some one suggested to use 0CO_PC_ACT_05 extractor but they have also mentioned it would not fetct data from history table MBEWH table. I need to extract full information based on both the tabels for all the years.
Is there any extractor available?
Please advise
Thanks
VennelaHi Vennela:
We did not use any DSO from standard content. We created a custom write optimized DSO with the same key fields as MBEW.
We do a delete data and full reload every night.
Then we load 0MATPLANT from the DSO.
We also do a currency conversion to convert all prices to USD and load a custom attribute of 0MATPLANT to hold USD prices.
These material prices will get over written every day with the current valuation for that day.
Thats our data flow.
We did not have a requirement to hold history from MBEWH. you might be able to hold history within BW if you load the data into another DSO with a extra key field for the system date of the day you are loading data for.
Hope this helps.
Good Luck.
MP. -
Stock of Material with Variants (Multiple Characteristics)
Good Evening All !!!
As per the customer requirement we have configured the material with a combination of Material Group Hierarchy & material characteristics.
e.g. Frame with the characteristics like Color, Size, Gender etc. (these can be different with each new frame).
I have also configured the batch management for these type of materials. Now, if I want to see the stock of all the materials with there variants where and how can I see that (apart from going in MMBE and right click on batch number ). Customer want to see the whole stock in a single go.
One more thing I would like to know, which all tables are involved in variant configuration, is there any table where system saves the variant details. So we could see all the variants present in the system.There is just nothing, you need to develop it yourself. You are not the first who asked for it. Search SCN with: stock report classification
You get above 500 hits, browse through the results, on each page you will probably find 3 discussions that talk about this.
We have such a report, but you cannot expect to see all and everything in one list.
I am right now in a merger project having 2 million materials with 16000 different classes and more than 6000 characteristics. Now imagine you develop a report like MB52 and add columns for the characteristics.
If you are having only 1 class with 5 characteristics for all all your materials then there will not be a major problem, but what shall be displayed in which column if you have many classes with less overlapping characteristics.
You see there cannot be anything like that "ready-to-use" made by SAP, as it would rarely fit to any companies need. -
No characteristics found for configuration valuation for material YYTESMAT-
Hi
in tcode PDN I am createing a filter and asing material yytesmat to it
when i try to assing characteristic to it i am getting error
'No characteristics found for configuration valuation for material YYTESMAT'
pls help how to solve this error
FYI :I have enter characteristic name in classifcation tab while creating material
pls reply psl reply
Edited by: pankesh betala on Jun 2, 2010 10:34 AM
Edited by: pankesh betala on Jun 3, 2010 8:04 AMHi,
As you said there is no data in material master for this material. this may be the reason for this. Try loading this material master and perform attribute change run. This should solve the issue.
thanks,
JituK -
Table entry for Valuation variant for material prices
We want to define a valuation variant for costing run. In that we need to select the material price based on the plan price. We have provision of entering three plan prices in the Costing tab-2 in the material master. But we want to enter plan prices for more than three dates. For this, we propose to enter the dates and prices in a separate table and that table needs to be accessed in the valuation variant for material prices closest to the date of valuation. How we can go about this ?
Hi
When you create Valuation Variant, choose Strategy U i.e. Price from userexit
Then code the exit COPCP0005 with the help of ABAP consultant
The logic should be:
a. Refer the "costing date from" entered in Ck11N
b. refer the Z table... and pick the price relevant on that date
br, Ajay M -
Standard reports for fetching the Material Characteristics
Hi,
Do we have any standard reports in SAP for fetching the Material Characteristics.
Regards,
SivDear,
Check the related links... may be helpful:
To fetch characteristic value (ATWRT) from material number
Material characteristics datasource
Characteristics Table ?
Characteristics Table ?
Regards,
Syed Hussain. -
Variant configuration for Material for Sales Order
Hello,
I have craeted a configurable material in MM01, then created class for using CL01 , its characteristics using CT04, CU41, CT04, VK11, and lastly VA01.
But still while creating sales order it throws error :
Configuration not possible for material PEN_4 :Reason 2 --> Help
What must be the problem? Also is there any BAPI who can create configurable material?
Can anybody help on this issue.
Useful answer will be rewarded.
Thanks,
Madhura Nadgauda.
Edited by: Madhura Nadgauda on Jan 16, 2008 7:45 AMtry this may be it will help to you,.
REPORT ZVRDOC0 no standard page heading
line-size 300
line-count 50(5).
TABLES : vbak, "Sales Document Header Level
vbap, "Sales Document Header Level
kna1. "General Data in customer Master
*INTERNAL TABLE T_VBAP
DATA : Begin of t_vbap occurs 0,
vbeln like vbap-vbeln,
matnr like vbap-matnr,
posnr like vbap-posnr,
arktx like vbap-arktx,
kwmeng like vbap-kwmeng,
cmkua like vbap-cmkua,
end of t_vbap.
*INTERNAL TABLE T_TAB.
DATA : Begin of t_tab occurs 0,
vbeln like vbak-vbeln,
kunnr like vbak-kunnr,
audat like vbak-audat,
netwr like vbak-netwr,
vkorg like vbak-vkorg,
name1 like kna1-name1,
land1 like kna1-land1,
end of t_tab.
*INTERNAL TABLE T_FINAL.
DATA : Begin of t_final occurs 0,
vbeln like vbap-vbeln,
kunnr like vbak-kunnr,
matnr like vbap-matnr,
posnr like vbap-posnr,
arktx like vbap-arktx,
kwmeng like vbap-kwmeng,
cmkua like vbap-cmkua,
audat like vbak-audat,
netwr like vbak-netwr,
vkorg like vbak-vkorg,
name1 like kna1-name1,
land1 like kna1-land1,
end of t_final.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE text-bO3.
parameters : P_kunnr like vbak-kunnr.
select-options : S_vbeln for vbak-vbeln,
S_audat for vbak-audat.
SELECTION-SCREEN END OF BLOCK B1.
start-of-selection.
select vbeln matnr posnr arktx kwmeng cmkua from vbap
into corresponding fields of table t_vbap where vbeln in S_vbeln .
IF sy-subrc EQ 0.
select vbakkunnr vbakvbeln vbakaudat vbaknetwr vbak~vkorg
kna1name1 kna1land1 into table t_Tab from
vbak join kna1 on kna1kunnr = vbakkunnr
FOR ALL ENTRIES IN t_vbap
where vbak~vbeln = t_vbap-Vbeln and
vbak~kunnr = p_kunnr and
vbak~audat in S_audat .
ENDIF.
*end-of-selection.
loop at t_vbap.
read table t_tab with key vbeln = t_vbap-vbeln.
move :
t_vbap-vbeln to t_final-vbeln,
t_vbap-matnr to t_final-matnr,
t_vbap-posnr to t_final-posnr,
t_vbap-arktx to t_final-arktx,
t_vbap-kwmeng to t_final-kwmeng,
t_vbap-cmkua to t_final-cmkua,
t_tab-kunnr to t_final-kunnr,
t_tab-audat to t_final-audat,
t_tab-netwr to t_final-netwr,
t_tab-vkorg to t_final-vkorg,
t_tab-name1 to t_final-name1,
t_tab-land1 to t_final-land1.
append t_final.
clear t_Final.
endloop.
sort t_Final by vbeln Kunnr matnr posnr .
loop at t_final.
at new vbeln.
write : /1 SY-VLINE, 2 t_final-vbeln color 5 inverse.
ULINE /1(250).
endat.
write : /1 SY-VLINE, 2 t_final-vbeln color 5 inverse,
20 SY-VLINE, 21 t_final-posnr color 5 inverse,
40 SY-VLINE, 41 t_final-matnr color 5 inverse,
60 SY-VLINE, 61 t_final-arktx color 4 inverse,
80 SY-VLINE, 81 t_final-kwmeng color 4 inverse,
100 SY-VLINE, 101 t_final-cmkua color 4 inverse,
120 SY-VLINE, 121 t_final-kunnr color 3 inverse,
140 SY-VLINE, 141 t_final-audat color 3 inverse,
160 SY-VLINE, 161 t_final-netwr color 2 inverse,
180 SY-VLINE, 181 t_final-vkorg color 2 inverse,
210 SY-VLINE, 211 t_final-name1 color 1 inverse,
230 SY-VLINE, 231 t_final-land1 color 1 inverse,
250 SY-VLINE.
at end of vbeln.
sum.
ULINE /1(250).
write: /60 SY-VLINE, 'Total' ,
81 t_final-kwmeng color 4 inverse ,100 SY-VLINE,
101 t_final-cmkua color 4 inverse,120 SY-VLINE.
ULINE /1(250).
endat.
at last.
SKIP 2.
sum.
ULINE /1(250).
write: /1 SY-VLINE, 60 SY-VLINE, 'Grand Total' ,
81 t_final-kwmeng color 4 inverse , 100 SY-VLINE ,
101 t_final-cmkua color 4 inverse,120 SY-VLINE.
ULINE /1(250).
endat.
endloop.
TOP-OF-PAGE.
ULINE /50(24).
WRITE : /50 SY-VLINE , 52 'SALES ORDER DETAILS' COLOR 5,
73 SY-VLINE.
ULINE /50(24).
ULINE .
WRITE: /10 'CURRENT DATE :', 25 SY-DATUM COLOR 1 INVERSE,
100 'CURRENT TIME :', 115 SY-UZEIT color 5 INVERSE.
WRITE: /10 'USERNAME :', 25 SY-UNAME COLOR 1 INVERSE,
100 'PAGE NO :', 113 SY-PAGNO COLOR 5 INVERSE.
WRITE: /10 'LOGON CLIENT :', 25 SY-MANDT COLOR 1 INVERSE,
100 'COLON N0 :', 114 SY-COLNO COLOR 5 INVERSE.
WRITE: /10 'CURRENT REPROT:', 25 SY-REPID COLOR 1 INVERSE,
100 'LANGUAGE :', 116 SY-LANGU COLOR 5 INVERSE.
ULINE.
ULINE /1(250).
write : /1 SY-VLINE, 2 'SALES DOC NO' color 6 inverse,
20 SY-VLINE, 21 'SALES DOC ITEM' color 6 inverse,
40 SY-VLINE,41 'MATERIAL NO' color 6 inverse,
60 SY-VLINE, 61 'SHORT SALES TEXT' color 6 inverse,
80 SY-VLINE, 81 'CUMM ORDER SALES' color 6 inverse,
100 SY-VLINE, 101 'CREDIT DATA' color 6 inverse,
120 SY-VLINE, 121 'CUSTOMER NO' color 6 inverse,
140 SY-VLINE, 141 'DOC DATE' color 6 inverse,
160 SY-VLINE, 161 'NET VALUE SALES' color 6 inverse,
180 SY-VLINE, 181 'SALES ORG' color 6 inverse,
210 SY-VLINE, 211 'CUSTOMER NAME' color 6 inverse,
230 SY-VLINE, 231 'CUSTOMER CONTY' color 6 inverse,
250 SY-VLINE.
ULINE /1(250).
END-OF-PAGE.
ULINE.
WRITE: /45 ' THIS IS END OF PAGE FOR SALES DOCUMENT DETAILS'
COLOR 6 . -
Class and characteristics for material
Hi Gurus,
In which table i can see Assignment of Classes to Materials?
Thank you
ANil
Edited by: anil maguluri on Jul 31, 2008 4:46 PMHi,
Table AUSP will have the values for material. Enter material number for field OBJEK and display the data.
Other Fields:
Class Type - KLART
Characteristic Value - ATWRT
Regards,
Srilatha. -
BAPI to create profile for material
Hi all,
Is there a BAPI to do following things:
1. create Profile for material
2. Assign new Class Type 300 for Material
3. add variants class to have characteristics and update its values.
Thanks in advance,
AmrutaHi Amrutha,
Please try this BAPI
BAPI_UI_CREATE
Regards
Rasheed -
Extractor for PM process orders
Hi Experts,
We are looking for a PM extractor for process orders, this is to get component information (material details), we found 2LIS_04_P_MATNR but it's limited to production orders only, also tried filling setup tables for this extractors but not fetching process orders at all.
http://help.sap.com/saphelp_nw70/helpdata/en/88/7fc73c0c52085be10000000a114084/frameset.htmIs there any clues?
-
SAP Standard Followup Action for Material Movement at the time of UD.
Does anyone know if SAP offers a standard Followup Action that once completing the Automatic Usage Decision, it will perform a Material to Material movement at the same time.
Exampe: I have two Materials with different Inspection types and Inspection Plans that will get processed and made into CP14.
1) CP14H - Incomimg Inspection Type Z01
2) CP14.B1 - Inprocess Inspection Type Z04
Both materials get assigned to the correct plan. They are then tested for required characteristics. If all are in Spec, an auto Batch Job complete the UD. At the same time I want to do a Material to Material movement to CP14 Unrestricted Stock for both inspection lot types. Right now to do the Material to Material movement I have to complet a MIGO transaction manually.Look at FM QM06_FM_TASK_GOODS_MOVEMENT.
It is a standard function module that is used in the action boxes in a quality notification to perform a goods movement. It is meant to be interactive with the user so it won't work as is, as a follow-up action to a UD. But you might be able to have your programmers copy this FM and use it as a basis to create your own custom code for your follow-up action. It might save you some time.
FF -
Creation of material characteristics
HI,
I have created new material characteristics in CT04, i also created new charc description under material class 001 but enable to creat values for that. it has become greyout. how to enter values.
AratiDid you assigned the new char to your class,were you are changing the char.
-
What is required userexit or badi or enhacement for material number ??
HI Sir,
Issue,
In MM01 TCODE
when we are entering the material number it should be the 12digit otherwise it has to give the error message.
so plz help what is the exact exit and the code .
thanks and regards
syedHi,
Check these BADI's
WRF_DISCONT_PARAMS_I BAdI: Parameters in Fashion Discontinuation
WRF_DISCONT_FACT_E BAdI: Follow-Up Actions in Discontinuation
WRF_DISCONT_CHECKS_I BAdI: Scope of Check in Material Reorganization
MG_MASS_NEWSEG User-Specific Fields & Segments in Mass Maintenance
MATGRP_SKU_UPD BAdI for Article Hierarchy Connection
CDT_CHECK_MATERIAL Checks for Existence of a Material in a CDT
BADI_MM_MATNR Modification-Free Archiving Enhancement of MM_MATNR
BADI_MATNR_CHECK_PVS Check Material for Use in iPPE
BADI_MATERIAL_REF Addition of customer-defined default data for material
BADI_MATERIAL_OD Integration of New Objects in Material or Article Master
BADI_MATERIAL_CHECK Enhanced Checks for Material Master Tables
BADI_GTIN_VARIANT User Exit for Customer-Specific GTIN Variant Check
BADI_EAN_SYSTEMATIC BAdI for Internal Control of EAN Logic
Regards,
Srini.
Maybe you are looking for
-
Upgrading Power PC G3 from 8.6 to 9.0 or 10.4
The machine has 512RAM and the latest Firmware update. It only has a CD drive, well, I "put a DVD drive in it but it only recognizes itself as having a CD drive." 1st Question: How do I get the machine to recognize that it has a DVD drive? 2nd Questi
-
No posting possible in fiscal year 2015
Hi I am getting below pasted error while performing AFAB (Depreciation Run). This is the first time we are running the depreciation in the production system. We did not encounter this error in quality or development. This is a gap implementation proj
-
How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone ex
-
How restart a database when missing indexdata files
My database is in archivelog mode. We need to restore it but we don't have the BACKUP containing index datafile, only system and data datafiles. When we open the database, ther is the error ora 01113 AND ORA 01110 and we need to recovery the database
-
Who is anybody using a WISM with FWSM on a CAT 6500 Switch?
Hi Who is anybody using a WISM with FWSM on CAT 6500 switch ? Are there any problem,if use? And How can I set them to connecting each other ? I have founded a document relate it on the cisco website that name is Integrating Cisco WiSM and Firewall Se