Extractor for RE-RX
Hi,
I have a question .
Which extractor is for table VIBDAO?I want to extract date from this table.
I've not findet full information in help.sap.com
Thanks
Hi
Please check
http://help.sap.com/SAPHELP_NW04s/helpdata/EN/01/ec163f9959a808e10000000a114084/frameset.htm
http://help.sap.com/SAPHELP_NW04s/helpdata/EN/01/ec163f9959a808e10000000a114084/frameset.htm
hope this helps you.
-Mayuri
Similar Messages
-
Extractor for PM process orders
Hi Experts,
We are looking for a PM extractor for process orders, this is to get component information (material details), we found 2LIS_04_P_MATNR but it's limited to production orders only, also tried filling setup tables for this extractors but not fetching process orders at all.
http://help.sap.com/saphelp_nw70/helpdata/en/88/7fc73c0c52085be10000000a114084/frameset.htmIs there any clues?
-
Is there any standard extractor for AFD provided by SAP?
Hi.
We are planning to implement SEM-BCS ? From this forum and SAP documentation( help.sap.com and service.sap.com), I just found that integration with ECC is total records(RFD) and some master data. Unfortunately, I could't find any further integration point. AFD such as inventory balance, Gross profit etc seems to be extracted from ECC such as FI, MM or CO module. But there is no mention in SAP documentation.
I think I missed good integration point SAP provided.
Otherwise, We have to develop the some program to extract AFD. Is my understanding correct?
Is there anybody who has experience to extract AFD from ECC with standard extractor or CBO program?The main problem with automatical load of AFD is the strict dependence on the ECC/R/3 configurations that might differ very significantly.
So, there is no standard extractors for AFD.
IPI - I used to figure out the ways of calculating the figures needed for IPI with non-standard functionality. And understood that even with a standard functionality the task of extracting the proper values are not esy at all.
IPA - there are so much data that needed to be entered for IPA, plus FI-AA configuration depends on implementation...
CoI - the most of data for it is accessible in ECC, even in RFD.
So, forget about the standard and easy way of extracting the data needed. Try to examine the configuration of modules you are interested in, and find the ways to extract the data. -
Hello all,
I have seen few threads on BW extractors for FS10N report.
I would like to know which is the best BW extractor to use for FS10N report.
Is it 0FI_GL_4 or 0FI_GL_10 or 0FI_GL_1? Could anyone please suggest.
Thanks,
Praveen TatiThank you Murali.
The table FAGL_ACTIVEC has no entries in ECC. I assume it is not active.
I will use 0FI_GL_4 extractor and enhance as per the requirement.
Could you please tell me what setting I need to do to get latest delta's when I run data load from BW?
I understand that I need to do some settings in tables BWOM_SETTINGS, BWOM2_TIMEST.
Thank you very much.
Praveen
Edited by: Praveen Tati on Jun 17, 2011 11:12 PM -
Can I have TWO Extractors for ONE InfoObject ???
Hi all,
We have two extractors (Business Content & Generic Extractor for 0WBS_ELEMT_ATTR). Can we have these TWO extractors for 0WBS_ELEMT InfoObject. If yes, can I have the procedure, PLEASE ?
Thanks.Hi Venkat,
You can try to use Flexible update. For this you will need to make your InfoObject an InfoProvider. See here for an example:
http://help.sap.com/saphelp_nw04/helpdata/en/87/3fdf9587f211d5b2ff0050da4c74dc/content.htm
Hope this helps... -
Extractor for AR aging report ?
Can anybody tell me if there is a standard extractor for this query ?
I would also appreciate if you can tell me what we can get out of this report.
Thanks,
Rishi.Hi Rishi
Use following for AR aging report (All business content objects)
Data source: 0FI_AR_4
Info cube: 0FIAR_C03
Query :0FIAR_C03_Q0005
Hope this helps
Regards
Pradip -
Extractor for payroll reads data from cluster PCL2?
Hello all,
This is the line from help.sap in payroll extractor.
"The extractor for payroll results reads data from payroll cluster PCL2, not from standard tables."
Can someone explain to me what do we have to understand from that, and where in R/3 do we have to go and check for data.
Thanks in advance.Anytime some of last information does not upload in delta to BW from payroll because payroll has a process to close it had to be executed (or something like that (sorry, i haven't enough funcional HR knoledge), it happened to me anytime).
But, surely the user that you are using for extraction has no enought rights or authorizations.
Look at these notes
397208 **** very important!!!
672514
964569
329961
585682 -
Hi,
Im looking for a standar extractor that can obtain the information that i have in the table s115 of R/3; or its necessary to create an extractor generic?
Thanks for the information
MónicaHi
just create a generic extractor for this table.
http://help.sap.com/saphelp_nw04/helpdata/en/37/4f3ca8b672a34082ab3085d3c22145/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
Reg's
Edan -
Hello Experts,
I am looking for a BC-extractor for table COBRB containingt hese fields:
OBJNR, BUREG, LFDNR, PERBZ, URZUO, GABJA, GABPE, GBISJ, GBISP, PROZS, AVORG, KONTY, KOKRS, BUKRS, HKONT, NLN1, ANLN2, MATNR, REC_OBJNR1.
Any idea?
We need the relation between COORDER and the valid HKONT for a certain moment.
As it is possible to have more than 1 HKONT (with different percentages and in time) I guess it is a different extractor than 0COORDER_ATTR and it can not just added to this ectractor.
Thanks in advance,
UdoHi,
Enter your table name in SE11 in ECC.
Click Where-Used-List
Select Structures, Programs etc., then it will show the entire info.
Regards,
Suman -
Extractor for AUFK and AFKO tables
Hello Experts,
I am looking for a standard extractor for the tables AUFK (Order Master data) and AFKO (Order Header). I wanted to know if there a exists a standard extractor for the same or I have to create a generic one.
Thanks,
RishiFor internal orders (ie aufk) have a look at 0COORDER and the transaction data 0CO_OM_OP*
and the rest of the content for IOs
http://help.sap.com/saphelp_nw70/helpdata/en/f2/db0c3c99d56448e10000000a114084/frameset.htm -
I need to extract some fields from the table FLEET, does any of you know if there's already a standard extractor for that?
Otherwise I may need to enhance an existing one or create my own. If so, can you suggest any ideas about how to link the data?
If I have to enhance, I was thinking about using 2LIS_08TRFKZ and add the missing fields there. Is this the right approach?HI,
Enter this table name in SE11 ->Display->Where-Used-List->Select Stuctures, Includes, Programs etc...
Get into ROOSOURCE table, Select A in OBJVERS, Extraction details etc..You will come to know about any Standard Extractor.
I have no idea about your second question.
Regards,
Suman -
Extractor for Purchasing Conditions for tables EKKO, EKPO and KONV
Hi Experts,
I want to know if there is an Extractor for Purchasing Conditions with fields in tables of Origin: EKKO, EKPO and KONV.
Or, at least an extractor with the table KONV.
Or, how I can look for it.
Any feedback, will be really apreciated.
Thanks in advanceHi David,
Adding to what said above.
Observe the Fileds in the Datasources and the details.
http://help.sap.com/saphelp_nw2004s/helpdata/en/5c/8ea0e626e442efb109232830faded9/frameset.htm
Regards,
Ram. -
Hi Experts,
I am looking for the stabdard extractor for the Planned order, Basically I need the fields from the table PLAF.
Please let me know any standard extractor available or any extractor need to enhance.
Thanks
saiHi Sai,
Take a look at 2LIS_04_P_MATNR and see if it is usefull:
http://help.sap.com/saphelp_nw70/helpdata/en/88/7fc73c0c52085be10000000a114084/frameset.htm
Else it seems that you should create a generic extractor directly on the table according to this thread:
Re: Extractors for Planned orders and Proces Orders
Hope this helps.
BR
Stefan -
Can anyone send me the name of the extractor for goods issue? Does it comes under SD? or MM fullfillment?
Thanjs
RajHi RajMani,
What exactly is your requirement?
Check with your business or functional team for the source tables from where they want the report to be built.
based on the source tables we can suggest you the exact data source you need for your requirement.
Regards
KP -
Hi ,
I wanted to know the extractor for table BKPF . Where can i know or which is the extratcor
Regards
Ankit VaishHi,
I hope, The datasource 0FI_GL_4 would be useful to you.
http://help.sap.com/saphelp_nw2004s/helpdata/en/8b/02f93abb013b0de10000000a114084/frameset.htm
With rgds,
Anil Kumar Sharma .P -
Hi ,
Could someone tell me the std extractor for table CABN or how to find the extractor for the table.
Thanks
Jay.Hi dear,
look at 0CRM_MKTATTR_ATTR
http://help.sap.com/saphelp_nw2004s/helpdata/en/8d/4cb2188716e8428c84bef5140d19d1/content.htm
Hope it helps!
Bye,
Roberto
Maybe you are looking for
-
Using affliate program to track agent commissions
We currently have wholesale login and ordering set up on our store and we want to be able to track commissions for wholesale orders that are referred from a particular sales agent. I am thinking Affliate links is the way to manage this but am wonderi
-
Problem in using connection pool in netbeans
Hi, I am using Net Beans and Sun java application server and Derby as database. I have created data connnection and also configure JDBC resources (ie. DataResource and connectionPool). Now i want to use this connection pool in my class, I have create
-
Batch automation with actions.
Jeffrey, Thanks for getting back to me, here is what the issue I am having looks like. 1) I had Photoshop CS5 on my Dell Precision Laptop. I created an action named "Vintage + BW" that went through these following steps. 1) Run "vintage action" that
-
Opening first tab of jquery accordion when page loads
Hello, I am wondering how I would make the first tab of my accordion to open when the page loads. It is a custom accordion and therefore it is hard to find the answer online. I want this to be specific to a certain page if possible rather than univer
-
Hi everyone, I have the following issue. After changing the context path, via felix console, I can not checkout the content via vlt. Before that, I could checkout without any problems. I am using CQ5.5, CRX2.3, context path: /Test That is what I am t