Extractor or Tables for Lockbox and Bank Statement Data
Hi experts.
I need to develop reports to do the following:
1. Lockbox data not processed (from transaction FLB1)
2. Bank Statement data not completed (from transaction FF67)
I'm having a hard time finding any business content and also which SAP tables store these data.
If I have to create custom extractors, I will, but I need to get pointed to the correct data tables to do this.
I already have business content extractors set up for Payment Advice, GL entries, and AP and AR.
Do I have to create something completely separate from those?
Any advice you have would be great, thanks.
No ideas?
Similar Messages
-
How to find R/3 table for FI and PS Datasources
Hi,
Can anyone tell me that how can we find SAP tables for FI and PS datasources in BI. Please provide information as it is urgent. Points will be assigned
Thanks
ShanthiHi,
To find DS assigned to a table.
How to find the Datasources for the given table names ?
How to find the Datasources for the given table names ?
To find Tables assigned to a DS.
USe Extractor Checker RSA3. Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
retrieve data and present it to you.
Note: Set the break point in the Extractor Function module.
View the ST05 Extended Trace list. The Object name shows the Tables accessed.
Thanks,
JituK -
G/L account in cash and bank statement
Dear All,
How to fill the field GL account in the cash and bank statement ? I have press tab but still can't open the list of G/L account. Thanks
Rgds,
MarkJimmy, tks for your wonderful and quick answer. I am using PE 680.01.70 version. It is still under my exploration if our company top management would like to use it, I think we will use. I'll be back to check your answers. if nothing well, I will unassign the points.
CU -
Table for Customer and vendor open balance on a key date
Dear All,
Can anyone please let me know Table for Customer and vendor open balance on a key date. We are developing one customized report.
I have checked with the below table :
Customer-KNC1, KNC3,BSID, BSAD
Vendor-LFC1, LFC3, BSIK, BSAK.
But these are not working properly for all customers and vedors. Also, in open items, there are items with clearing documents.
Plesae let me know, how to go for it.
Please suggest.Hi
Use BSID and BSIK for open items
And pass company code, year and from date and to date range in Posting date selection option
Reg
Vishnu -
Need table for customer and vendor carry forward balance
Hi,
I need to fetch the carry forward(opening) balance for GL, customer and vendor account for my report.
I have table which contains c/f balance for GL accounts which is "GLT0" and now looking for a table for customer and vendor accounts.
Please let me know if anyone have idea in which table i can get the c/f balance for customer and vendor accounts.
Thanks in advance.
Regards,
SwatiHi Gurus
The requirement from the client side in my case is to have opening balance in Tr code ZFBL1n, ZFBL3N and ZFBL5N.
Now, from the above thread i got the Tables where i could find the Vendor and Customer Opening Balance but i also want Opening Balance for GL.
and my 2nd query is how to get these opening balance in Z report, at Header Level.
Thanks and Regards
Dnyanesh -
Source tables for forms and tabular forms must have a primary key.
Why does HTML DB 2.0 return the message
"Source tables for forms and tabular forms must have a primary key."
when trying to generate a "Report and Form" page based on a view defined like "create view <applicationschema>.a as select * from <sourceschema>.b" ?
It should be possible for HTML DB to "see" that the table "<sourceschema>.b" already has a primary key.
bw - ChristianChristian,
In the create application wizard, when creating form or tabular form pages, you can only use tables with primary keys, and not views, because that wizard is automatically deriving the primary key from the table definition. If you want to build forms on views or tables without a primary key, you need to use one of the create form wizards while working on an existing application. Those wizards allow you to pick your own column as a primary key column.
Regards,
Marc -
Taking long time filling the setup tables for sales and shipment
Hi ,
I am trying to fill the setup tables for sales and shipment and it is taking lot of time .
It took 16 hours just to bring 6 months of sales history data in the test environment .
Cn anybody help on this issue why it is taking that much of time ...
I am trying to load the sales data from R/3 into APO-BW from 2005 to 2007 .......
It is taking 16 hours to fill the data for only 6 months .Hi,
1. delete data and refill the setuptables again by spliting to several small pieces.
2. compare the data. wht is the last Document numner in RSA3(Maximum one). Start from Maximum one. may be bit complex approch.
you need to check with PSA and base tables.
keep one thing in your mind you need to check againest MSEG and BSEG only. noy BKPF and MKPF.
correct if i'm wrong.
either refill or create a user exit to avoid duplicae records(you should have very good understanding of data, it will lead to inconsitent data for delta records).
User exit not a good solution. it's one possibility.
****Assign Points If Helpful****
Regards,
Ravikanth -
Speed within Cash and Bank Statement
One of our customers criticizes the speed at the booking of Cash and Bank Statements in SBO 2005A.
The more rows are added all the more slower becomes the processing of the current row.
This behavior appears extremely if the customer finalizes or saves the Statement.Thanks Rahul.
I was actually trying to use the bank file import functionality on the Cash and Bank screen. When you press the Bank File button, it opens a browse window where you can select a text file to be imported. There has to be someone out there that has used this import function! Anyone?
Thanks,
Jose -
Table for terms and conditions
what is table for terms and conditiions??
regards
jyotiHi Jyoti,
If u are looking for the payment terms then the table T052 and T052U.
Regards
Kiran Sure -
Base tables for aggragates and Multiproviders
Is RSDICMULTIIOBJ the base table for Multiproviders?
What is the base table for Aggragates and units?Multiproviders
RSDCUBEMULTI
RSDICMULTIIOBJ
Aggregates
RSDDAGGREF
RSDDAGGRT
RSDDCVERREPAGGR
RSDDAGGR
RSDDAGGRCOMP
RSDDAGGRDIR
RSDDAGGRDIR_M -
How to fill up set up tables for 2lis_03_UM and BF?
Hi,
I am working on Material movements, and i have a How to do document. According to that, its showing me to fill up set up table for 2Lis_03_bf by using TCode OLI1BW, and in the very next step its again telling me to fill up set up table for UM, by using the same TCODE ( OLI1BW ) .
Now, if i do that, how would the system know that it has to fill up set up table for BF and then UM ? , no where in the screen its asking to fill up the Data source.
OR i just have to fill up set up table ONCE, and it will fill up for both the DS ?
please help.
thanksHi,
I think you can follow the same procedure. After completion of setup table filling you can check the result in RSA3.
In case of UM, you will have the provision to load data based on specific Company codes, but if you don't have any such requirement then you can simply fill setup tables.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Aug 30, 2011 10:29 AM -
Table for shipping and billing documents ?
hi experts,
how can we come to know that what shipping (VL01n), and billing(VF01) documents has been created for any particular date.
actually the problem is that i want to modify some documents that i have created a few days ago, plz help me?
thanks in advance.Hi Vishal,
Some of the tables for Delivery and Billing are LIKP, LIPS, VBRK, VBRP, ...
If you want to modify document, modify at transaction level and it is not recommended to go and do the changes in the tables, as it is difficult to understand the impact of the same. if it is done at table level.
Assuming that you want to amend the quantity in Delivery and billing of the same, some of the recommended options are:
1. Cancel the Billing Document >> Reverse Post goods Issue >> make necessary changes in the quantity >> again do PGI >> Billing.
2. Create a return document to for necessary quantity >> Return delivery >> Post Goods receipt >> Credit Note (optional)
In the case of Price difference, follow the path of Debit Memo, Credit Memo or Invoice correction.
Identify Standard solution, so that it will update all the tables and records necessary.
Regards,
Rajesh Banka -
Table for preceding and Susequent documents .
hi experts,
Please tell me the name of table which contains all preceding and subsequent documents of purchase order or sales order.
Answer will be rewarded by Max points.
regards,
SandeepHi Vishal,
Some of the tables for Delivery and Billing are LIKP, LIPS, VBRK, VBRP, ...
If you want to modify document, modify at transaction level and it is not recommended to go and do the changes in the tables, as it is difficult to understand the impact of the same. if it is done at table level.
Assuming that you want to amend the quantity in Delivery and billing of the same, some of the recommended options are:
1. Cancel the Billing Document >> Reverse Post goods Issue >> make necessary changes in the quantity >> again do PGI >> Billing.
2. Create a return document to for necessary quantity >> Return delivery >> Post Goods receipt >> Credit Note (optional)
In the case of Price difference, follow the path of Debit Memo, Credit Memo or Invoice correction.
Identify Standard solution, so that it will update all the tables and records necessary.
Regards,
Rajesh Banka -
Table for Material and Inspecton lot together?
Dear SAPIENTS,
Please tell me table for Material and Inspecton lot together.
Regards,
Kaushal RaiHi Kaushal,
- Run trx QA08.
- Select the option Activate inspection type. (This tab should be green)
- Enter material type at least to not have a junk of data at a single execution. You can set other fields as per your requirement.
- Check the Box "Assign Inspection type", Don't check/activate any of the rest three
- Enter the inspection type, here is an limitation you can know the status inspection type by type.
- Execute.
- The system will give you the list of the materials that are note activated for the inspection type you feed in the selection screen.
Hope it satisfy you. at the other way me and you both will search for the better option.
Regards,
Shyamal -
Hi All,
Accounts user entered manual Bank Statement and save but wrongly entered Bank Statement Date.
I am unable to change Bank Statement dat. Is there any way to change Bank Statement date?
Regards
AJHi,
Please follow the below link it will help full for you........,
FF67 problem, can't change statement date(statement saved but not post)
Naresh
Maybe you are looking for
-
How can i have customer balance report at Ship to Party Level
HI All My client want to have a report for customer balances at ship to party level For example for a customer ABC has 4 ship to party and they want to track Sales at each ship to party level for Customer ABC Regards Sandip
-
Smart Album to find No Description
I am using iPhoto 9.2.3 on OS10.6.8. I used to be able to have a smart album with the condition "Description is" and I would leave the text field blank. This would give me all my photos that do not have any description. Now it does not select any pic
-
I just want to see all of my devices, on one page.
-
PM 6500/300 to Intel iMac in one leap
I hope to jump from a PowerMac 6500/300 (OS 9.1)to a new iMac soon. I'm also borrowing my Mum's eMac (OS 10.3.9) as well at the moment and have them both LANned together via a Netgear 614 v2 Router. What concerns me is will I still be able to play so
-
How to troubleshooting port channel in N7K
i find N5K http://www.cisco.com/c/en/us/support/docs/switches/nexus-5000-series-switches/116199-technote-stp-00.html i notice distribution switch has root guard block log does it mean that looping has occured yesterday? i use command below do not h