Extractors of flexible real estate in controllig
Hello there.
We implement 2 subjects in our project: Flexible Real Estate and Controlling.
There is an InoCube of CO data in the REFX modoule (costs and revenues), but it seperated from all other controlling data of cost centers, internal orders and projects.
We would like to see all costs and revenues of real estate object in the "costs and allocations" infoCube.
Does anyone has a clue how to extract, with standard extractors of CO, the costs of real estate objects?
Thank you very much,
Hana Kerker
SAP BW Consultant
Hana
Welcome to SDN
Have you tried using these extractors?
0REFX_4: RE: CO Actual Line Items (Transaction Data)
http://help.sap.com/saphelp_nw04/helpdata/en/7e/95153fdb6f6b36e10000000a114084/content.htm
0REFX_3: RE: CO Data (Transaction Data)
http://help.sap.com/saphelp_nw04/helpdata/en/4a/95153fdb6f6b36e10000000a114084/content.htm
0REFX_6: RE: Cash Flow
http://help.sap.com/saphelp_nw04/helpdata/en/2f/66a1fda1c34bfab3f3f426eddd1492/content.htm
Hope this helps
Thnaks
Sat
Similar Messages
-
Flexible Real Estate Sales Report Extractor
Hi experts
Is there any standard content available that extracts the Flexible Real Estate Sales Report data in table VISRREPORT?Hi ...
I am not sure if I understood your question, I guess you were either looking for standard way of extracting Sales report data for any contract ? if this was the question then I would say there are 2 ways one is using function module which is available from ECC 6 XBAPI_RE_SALES_REP_GET_LIST and other way is to use class CL_REDB_VISRREPORT and resoective methods.
If you were asking how to populate sales voloumes or amount for contracts on sales report then I would say use BAPI XBAPI_RE_SALES_REP_REPORT but even this is not in 4.7 .
Please reward if this was helpful. -
Flexible real estate: contract between 2 companies
Hi,
We have not yet flexible real estate and we are studying this module for deciding to use it or not. We have a lot of contracts where the landlord is one company of our group and the tenant is another company of our group. Both companies are in the same SAP, so we want to register each contract only one time and get bookings in both companies, at one side for lease-out and at other side for lease-in. It seems not possible. We should have to enter one contract in each company, with redundant information for the conditions, texts, dates, etc... Is it right ? Have you experience with such cases ? What is the best solution ? We are in 4.7, but information about other releases is welcome (please specify the release in your answer).Hi,
As far as I know this could'nt be achieved without programming and doesn't seem to be easy. But I can tell you a workaround.
In Transaction Manager Module (used for financial instruments) there is a jocker called Cashflow instrument. You can create an instrument of this type in a company and the operation can be mirrored in the other.
I used this for loans than were lend and borrowed by group companies (shareholders loans) that were in the same SAP installation (in 4.7).
The problem is that it will work Ok for simple cashflow but you have to renounce to all real estate functionality. I mean, if you only need the financial flows and postings it's OK.
Hope to help, -
Hi
Can someone please help me in configuring Flexible Real Estate Management in SAP BW.
I have loaded BUSINESS CONTENT and there are no datasources avaialble to me for for cubes 0REFX_C11, 0REFX_C12 and 0REFX_C14, as well as DSO'S 0REFXDS03, 0REFXDS02.
For DSO = 0REFXDS03, my understanding is that this DSO is used for deleted items, so i have the Transformations but im unable to create the DTP on the InfoObjects.
this is what i found on web..
To be able to use this DataStore object, you have to create the necessary data transfer processes. For this data transfer process from the DataStore object to the individual InfoObjects, make the following filter settings:
u2022 0REOBJECT u2014 BI Delta Procedure <> X (Before Images Are Filtered)
u2022 0ARCHOBJECT u2014 BI Delta Procedure <> X (Before Images Are Filtered), Object Type I0
u2022 0BUSENTITY u2014 BI Delta Procedure <> X (Before Images Are Filtered), Object Type IW
u2022 0REBUILDING u2014 BI Delta Procedure <> X (Before Images Are Filtered), Object Type IB
u2022 0REPROPERTY u2014 BI Delta Procedure <> X (Before Images Are Filtered), Object Type IB
u2022 0RENTOBJECT u2014 BI Delta Procedure <> X (Before Images Are Filtered), Object Type IM
u2022 0RECONTRACT u2014 BI Delta Procedure <> X (Before Images Are Filtered), Object Type IS
u2022 0SETTLEUNIT u2014 BI Delta Procedure <> X (Before Images Are Filtered), Object Type IA
BUT IM UNABLE TO CREATE THIS DTPS... AND GET ERROR MSGS...
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_CLASS', was
not caught in
procedure "SRCTP_TO_TLOGO" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
At dynamic class method call, the class " " was specified, which could
not be found.
THESE SITES BELOW IS FROM HELP.SAP.COM WHICH ARE NOT INFORMATIVE
0REFXDS03(ODS) - http://help.sap.com/saphelp_nw70/helpdata/en/8e/5ce4a4d0a14db5901730dd1053e2b7/frameset.htm
0REFXDS02(ODS) = http://help.sap.com/saphelp_nw70/helpdata/en/6c/b23558949548fbbbd6ba0fd1cca05c/frameset.htm
0REFX_C11(CUBE) = http://help.sap.com/saphelp_nw70/helpdata/en/f3/969deb16d54bc3a9f773427a7ca995/frameset.htm
0REFX_C12(CUBE) = http://help.sap.com/saphelp_nw70/helpdata/en/60/3ba0643454498283e9896a60f75ddf/frameset.htm
0REFX_C14(CUBE). = http://help.sap.com/saphelp_nw70/helpdata/en/34/ed18b799e249c8b1ce54da21e057f2/frameset.htm
PLEASE HELPHi Ahmed ,
Did you got any update regarding the above query ?
Do you have any idea about the extraction/ data source for 0REFX_C14.
Regards
PA -
AutoCAD 2008 and Flexible Real Estate
Hi all,
Liberty are looking at implementing AutoCAD 2008 integration in Flexible Real Estate.
Is this version of AutoCAD compatible with the integration solutions that are available?
Regards
KevinHi all,
I also like to emphasize, that CIDEON Software has an excellent solution for managing AutoCAD Drawings with RE-FX relation to it.
Furthermore graphical report tools in place SAP are available.
Here is the needed information on this:
http://www.cideon-software.com/cideon/en/so/produkte/sap_alm/index.php
BR -
Plant Maintenance followed by Flexible Real Estate
We are looking to implement both Plant Maintenance and Flexible Real Estate. We are hoping to first implement Plant Maintenance, and then follow it with Flexible Real Estate.
Is there any reason we should not follow this logic? Should we implement them both at the same time, or should flexible real estate get implemented before plant maintenance? Will we be creating a lot more work by implementing them separately?
Reasons why or why not would be very helpful.
Thank you all for your time,Hello
Follow this link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/fc/7f383b1b793821e10000000a114084/frameset.htm -
Help needed to activate Flexible Real Estate in R/3 4.7
Hi all gurus,
Need your help..
I am trying to configure SAP Flexible Real Estate Management in R/3 4.7. I had done all the following steps to configure:
1. Activate the Financials Extension (Application Indicator EA-FIN) in the SAP R/3 Enterprise Extension Set.
2. Activate the Real Estate Extension.
3. Activate the RE-FX component in the correct controlling area.
4. Make the basic settings for the company code and activate Financial Assets Management.
5. Make the basic settings for measurements.
However, in SAP Easy Access, the following information msg appeared: "Transaction RE80 does not exist"
Anyone encountered the same problem before?hi,
yes u may did all config settings required for activate RE-FX but still u unable to run re80 t.code.
i think if u do in ecc6 it will happen.
in 4.7 u dont have RE-FX, its only RE-classic.
see sap note 443311 and 517673.
Regards,
mahadev. -
Wayleave Management using SAP Flexible Real Estate
Hi All
I would like to find out if anyone has ever worked with Wayleave management for utilities using SAP. Essentially Wayleave is a term used for the access or permission given by a landowner or property owner to a service provider for the use of land or property. An example would be allowing a contractor to lay sewage pipes through property owned by another for a payment.
Now I have been reading documentation on Flexible Real Estate as a possible solution to most of the wayleave requirements. However I am not absolutely sure just how much FxRE could be customised to meet the exact requirements of wayleave management.
I am therefore looking for an opinion from those who may have had experiences or have knowledge of wayleave management using SAP or any suggestions would be most welcome.Hi,
BTW, other clinets call it GSA, like Dept. Homeland Security and some call it SLL..
Eg. of Sub-Leasing. But Lease Accounting and Contract Acct . is part of REFX>
Please provide points.
TY,
nv. -
Flexible Real Estate - Additional condition.
Flexible Real Estate: How do I add a new condition on contract? I already configured the followitng steps:
1. 1. Defined a Condition type
2. Defined a flaw type
3. Assign Reference flow type
4. Account Symbol( specify acc symbol)
5. Assign account symbols to flow types
6. Define Condition Groups and assign Condition types
The condition is added but when I test, the system post to a different condition. Did i skip a step maybe?
Edited by: Susan Nkopane on Sep 14, 2010 11:42 AM
Edited by: Susan Nkopane on Sep 14, 2010 11:44 AMHi
Gothrough the below links :
http://forums.sdn.sap.com/click.jspa?searchID=42443232&messageID=8307343
http://help.sap.com/saphelp_erp60_sp/helpdata/en/fb/13592b457311d189440000e829fbbd/frameset.htm
http://forums.sdn.sap.com/click.jspa?searchID=42443290&messageID=8243143
Activation of REFX:
http://forums.sdn.sap.com/click.jspa?searchID=42443290&messageID=7754729
VVR -
Hi SAP gurus...
Can any body give the documentation details abt Flexible Real Estate which i am working presently.
Thanks in Advance.Dear Anil Dasari!
For documentation please see:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/00/80383b1b793821e10000000a114084/frameset.htm
best regards,
Ulrike -
0refx_c03 flexible real estate settlement
Hello Gurus,
We are using 0refx_c03 infocube for flexible real estate. When we load the cube settlement accounting type also gets loaded which cancels out the cost of the contract object. We dont want settlement posting to get loaded into the cube. Any of you had similar issues before, and how did you resolve this one. Please help me!!!
-ShreeI am wondering about the same things. Is there more information available today?
Edited by: Anja Haufe on Dec 1, 2008 4:50 PM -
I am a BI consultant, please send me any Flexible Real Estate Document to understand the Flex Real estate table to see where the datasource pick the data from what tables
also want to understand the process flow for flex real estate
thanks
soniyaHi Soniya,
I suppose you have accress to the sap online marketplace. Please take a look at note 681951. This gives some information about the differences between classic Re and RE-Fx (on ERP 2004 or higher). It would be easier to give you more specific info, if you could tell me the release that you are working on.
Hth
Ute -
BAPI's in Flexible Real Estate
Hi
I have a requirement to extract the Usage View and Architectural View data from SAP Real Estate on ECC 5.
Does anyone know of any BAPI's I can use to do this?
Thanks
FaaiezHi Sallie,
There is no standard BAPI which solves your purpose.
For more info refer to the following link
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/fc/7f383b1b793821e10000000a114084/frameset.htm">http://help.sap.com/saphelp_erp2005/helpdata/en/fc/7f383b1b793821e10000000a114084/frameset.htm</a>
Hope it helps...
Lokesh
Pls. reward appropriate points -
COST involved in Implementing flexible real estate
Hi Experts,
Is there any extra cost involved in implementing RE_FX rather than classical RE .
Thanks In advance.
MohanHi,
I don't think there won't any extra cost involved in implementing REFX.
Check the OSS Note : 443311 - Extension SAP Real Estate: Technical Basics.
As per the note you need to activate, once you activated you can use only REFX & Classical RE will no longer available for use.
Also have a look to the below post :
Re: REM Licensing
VVR -
Flexible Real Estate BAPI or API for Supplemental Text (Memo Fields)
Hi,
Can any one let me know if there are any BAPI or API by which i can load long text into Memo Field (Supplemental text). we are on ECC 6.0 version (FLX-RE)
Thanks
VemanHi,
the upload of additional texts with BAPI or batch input recording is
not supported.
It's not possible to create notes or memos with the same BAPI call for
creating the real estate object itself. But you can add supplementary
texts in a 2nd step for existing real estate objects.
(1) Additional texts are SAPscript text modules
Use function modules INIT_TEXT and SAVE_TEXT.
Keys of RE-FX text modules are:
- OBJECT always "RE"
- ID = group key, e.g. "TMNO"
- NAME = <INTRENO of real estate object>#<subkey>#
- LANGU = logon language
Simply create a memo manually and check the resulting SAPscript text
module with report RFRECATM (tool to maintain text modules).
Function modules CONVERT_STREAM_TO_ITF_TEXT and
CONVERT_ITF_TO_STREAM_TEXT may be helpful to work with the SAPscript
ITF text format.
(2) Update of table VICAADDTEXT
The relationship between contract and text id is stored in table
VICAADDTEXT. To see the before created text module in the contract
dialog you have to insert an entry in table VICAADDTEXT.
INTRENO intreno of the contract
TEXTCATE text category
ADDTEXTGUID GUID for additional text
A new GUID can be created with function call:
CALL FUNCTION 'GUID_CREATE'
IMPORTING
ev_guid_16 = ls_vicaaddtext-addtextguid
EV_GUID_22 =
EV_GUID_32 =
It may be helpful to first have a look at the content of table
VICAADDTEXT to see how already manually inserted entries are stored
in this table.
I hope that this information will help you to get the texts loaded.
Regards, Franz
Maybe you are looking for
-
Owning 2 iphones with one Apple account has = Sync Problems.
Owning 2 iphones with one Apple account has = Sync Problems. iTunes is thinking my old iphone 4 is the same phone as my iphone 5C. When I plugged in my iphone 5C it auto synced my 5C to iTunes and it wiped my 5C and restored it to the same content
-
New laptop, existing iPad and snyc issues
Ok. New laptop installed. iTunes installed. All apps transferred. iTunes music and other sourced music available in iTunes. All my PDF files in iTunes And yes the new iTunes is authorised on my Apple ID. But... I need to sync my PDFs and I get
-
Query condition not reflected in VC model
Hello, I have a query that has a condition that allows the user to view the Top N of a key figure by entering the desired "N" amount. When I run the query on its own, it works as expected. If I enter 5, I see the top 5 results. I have put this query
-
How can I find out what devices are hooked up to my icloud?
I need to know what all devices are linked to my apple id. Is there any way to do this??
-
When releasing PO error occured Express Document " Update Terminated"
hi all i am getting a strange problem , while doing release of PO(purchase order) by t.code ME29N, i am able to release and SAVE it properly with out any error. But when returning back to ME22N t.code to see that PO . i am getting this error :