Extrcting the data used for building a Dshboard in Xcelsius to internl tabl

Hi,
Is there a way to get the data present in an Xcelsius dashboard back to an internal table?
I know its pretty complicated.
But is there any way in which I can get the data that is finally used to build a dashboard using ABAP?
Thanks,
Mahesh M.S.

As mentioned by Linc there is no 'lights out' management for the Mac mini (or any current Mac). If the Mac is still running you can initiate a reboot via the GUI or commandline. If however it is completely crashed then there is a solution you could consider which is to get a managed power distribution strip. With this the power strip has its own network connection and lets you remotely turn off (and on) individual power sockets. This would then let you 'hard reboot' the Mac mini even if crashed.
See http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=ap7921& tab=features

Similar Messages

Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date?

Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date? We are facing a scenario where trx date is lower than the actual ship to which logically sounds incorrect.
Appreciate any quick response around this.

Hi,
Transaction date will be your autoinvoice master program submission level date (If you haven't setup any logic.
Please check the program level default date, if user enter old date ststem will pick the same.
Customer is trying to set the value of the profile OM:Set receivables transaction date as current date for non-shippable lines at the responsiblity level. System does not set the transaction date to current date in ra_interface_lines_all.
CAUSE
Customer has used the functionality in R11i. But after the upgrade to R12, the system functions differently than R11i.
SOLUTION
1.Ensure that there are no scheduled workflow background process run.
2.Set the profile "OM: Set Receivables Transaction Date as Current Date for Non-Shippable Lines" at Responsibility level only as Yes.
3.Now switch the responsibility to which the profile is set.
4.Create order for Non-Shippable Lines and progress it to invoicing.
5.Ensure that the 'workflow background process' concurrent program is run in the same responsibility and this line is considered in it.
6.Now check if the 'SHIP_DATE_ACTUAL' is populated to ra_interface_lines_all

Unable to Get the Data Using For All Entries

Hi everybody, i am using for all entries in a program. but when i am writing a code using for all entries i am getting an error as
Where condition does not refers to the FOR ALL ENTRIES tables...
SELECT KUNNR
       NAME1
       ORT01
       LAND1
   FROM KNA1 INTO TABLE ITAB1 WHERE KUNNR IN S_KUNNR.
IF NOT ITAB1 IS INITIAL.
SELECT VBELN
        ERDAT
        KUNNR
   FROM VBAK INTO TABLE ITAB2 FOR ALL ENTRIES IN ITAB1 WHERE KUNNR = IT_KNA1-KUNNR.
ENDIF.
can anybody help out in this
regards
hyder ali

The correct one may be like this:
SELECT KUNNR
NAME1
ORT01
LAND1
FROM KNA1 INTO TABLE ITAB1 WHERE KUNNR IN S_KUNNR.
IF NOT ITAB1 IS INITIAL.
SELECT VBELN
ERDAT
KUNNR
FROM VBAK INTO TABLE ITAB2 FOR ALL ENTRIES IN ITAB1 WHERE KUNNR = ITAB1-KUNNR. "modified here
ENDIF.
Edited by: XuJian84 on Mar 9, 2010 4:25 AM

Data used for BAM

I would like to use the data used for BAM, for other reporting purposes. Where can I find the data like instances completed, active instances, approved instances, decline instances, etc.
Thanks
Aditya

If you look at the Workbench interface (http://localhost:8080/bam/login/workbench.htm) you can see the SQL code the views use to create the graphics.
That might be a good starting point.
Jasmin

How do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full

how do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full.. HELP!

When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.

What is the method used for upload of data

Hi All,
What is the method used for upload of Data from excel spread sheets to SAP HR.
it is Bulk Data from many countries.LSMW or BDC Session Method?
what are country specific infotypes used for PA and OM.
can u plz give the list of country specific infotypes used for PA n OM Module.
Thanks
Archana

Hi Archana,
To Upload bulk data I think BDC is the best and effecient way.
Regarding Infotypes we dont have any country specific Infotypes in OM & PA. In Payroll we do have according to country wise.
I hope you had understood the point
Regards
Pavani
Remainder: Points to be given on answers

My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

Hi,
You could use FND_FLEX_LOADER_APIS.UP_VALUE_SET_VALUE to upload them from staging table (I suppose you mean value set values...).
You can find a sample scripts if you google around.
What do you mean "how to map any API to our staging table" ?
You should do at least the following mapping (which column(s) in the staging table will provide these information):
- the 3 value sets name which you're going to update/upload (I suppose these are existing value sets or which have been already created)
- the value set values and description
Try to start with something and if there is any issues the community could then help... but for the time being with the description of the problem you have provided, that's the best I can do...

HT4203 I have turned off the Data use on the I-phone 4s but am told by AT&T that data is still being used for applications. How is this possible. Can someone help me understand this. Thanks.

I have turned off the Data use on the I-phone 4s but am told by AT&T that data is still being used for applications. How is this possible. Can someone help me understand this.

I assume you are including the STIX font as part of your epub files?
Perhaps the folks who do this blog might be able to help -- they have done some work with font embedding:
http://www.pigsgourdsandwikis.com/2011/04/embedding-fonts-in-epub-ipad-iphone-an d.html

SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani Sankaran

Hi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Trying to change the data source for a Crystal Report.

The method below represents my best attempt to programatically change the data source of a Crystal Report. The goal is to have a routine that will update the data source for reports after they have been distributed to production servers. So far I have not been successful in saving the report back to the CMS. No exceptions are thrown, but when I view the Database Configuration of the report in the CMC nothing has changed.


Am I missing a step, or is there another way to accomplish this?


Thank you.

<hr />
<pre>
private void test(String reportName)
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects;
 IInfoObject reportObj;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dc;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB; //0;
 Fields connFields = null;
 String queryStr = "Select * From CI_INFOOBJECTS " +
 "Where SI_NAME='wfr.rpt' AND SI_KIND='CrystalReport' AND SI_INSTANCE=0";
 newInfoObjects = getCms().executeQuery(queryStr);
 if(newInfoObjects.size() > 0)
 reportObj = (IInfoObject)newInfoObjects.get(0);
 try
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dc = clientDoc.getDatabaseController();
 conInfos = dc.getConnectionInfos(null);
 for(int i = 0; i < conInfos.size(); ++i)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(i);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue("QE_ServerDescription", "alio");
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("Server", "alio");
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName("admin");
 newConInfo.setPassword("password");
 dc.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 catch(ReportSDKServerException Ex)
 String msg = "A server error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 catch(Exception Ex)
 String msg = "An error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 finally
 clientDoc.save();
 getCms().commitToInfoStore(newInfoObjects);
 clientDoc.close();
</pre>
Edited by: Mark Young on Sep 10, 2009 2:16 PM

<style type="text/css">
/<![CDATA[/
 body
 font-size: 1.125em;
 font-family: helvetica,arial,"sans-serif";
 .code{font-family: "courier new",courier,mono,monospace}
 .bi{font-style: italic; font-weight: bold;}
/]]>/
</style>
Justin,

Thank you for the reply. Time constraints have not allowed me to post back to this tread
till now. I will try your suggestion. My assumption is that Save the report back to the
info store refers to IInfoStore.commit(IInfoObjects).


I'm afraid that I do not understand why I don't want to change the report client document,
or why successfully exporting the report with the new login/password is not what I
want to do. Any explanation on that statement would be appreciated.


I did find a way to accomplish my goal. It involved adding the SSOKEY property to the
logon property bag. Below you'll see my revised code which modifies the report logon and
server. I have no idea what
this does, and SAP support has not been able to tell me why it works. However, what I
discovered is that if I changed the report option, Database Configuration -> When
viewing report:, in the CMS to Use same database logon as when report
is run from Prompt the user for database logon, then the
SSOKEY property had been added to the logon property bag having an empty string as its
value. This allowed me to successfullyupdate and save the modified logon back to the CMS.


So I took a chance and added code to always add the SSOKEY property with an empty string
as its value, and I could then successfully modify and save the report's logon info
and server. Again, I don't know what this means, but it has worked so far. If anyone has
some insight or comments, either are welcome. Thank you in advance.

 
<hr />
<pre>
private void changeDataSourceOfAWFCrystalReports()
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects = null;
 IInfoObject reportObj = null;
 IReport curReport = null;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dbController;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB;
 Fields connFields = null;
 String outputStr;
 int numOfReports;
 int numOfQueryPages;
 double progressIncrementPerPage = 30;
 int progressIncrementPerReport = 0;
 // Path query to reports is in a .properties file.
 String queryStr = getAppSettingsFile().getWscAwfCrystalReportPathQuery();
 try
 // Executes IInfoStore.getPageingQuery() and generates a list of queries.
 getCms().setPathQueryQueries(queryStr, 100);
 numOfQueryPages = 0;
 // Gets a List<String> of the IPageResult returned from IInfoStore.getPageingQuery().
 if(getCms().getPathQueryQueries() != null)
 numOfQueryPages = getCms().getPathQueryQueries().size();
 if(numOfQueryPages > 0)
 // Use 30% of progress bar for the following loop.
 progressIncrementPerPage = Math.floor(30.0/(double)numOfQueryPages);
 for(int queryPageIndex = 0; queryPageIndex < numOfQueryPages; ++queryPageIndex)
 // Gets the IInfoObjects returned from the current page query
 newInfoObjects = getCms().getPathQueryResultSetPage(queryPageIndex);
 numOfReports = newInfoObjects.size();
 if(newInfoObjects != null && numOfReports > 0)
 progressIncrementPerReport =
 Math.round((float)Math.floor(progressIncrementPerPage/(double)numOfReports));
 for(int reportIndex = 0; reportIndex < numOfReports; ++reportIndex)
 reportObj = (IInfoObject)newInfoObjects.get(reportIndex);
 curReport = (IReport)reportObj;
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dbController = clientDoc.getDatabaseController();
 conInfos = dbController.getConnectionInfos(null);
 for(int conInfosIndex = 0; conInfosIndex < conInfos.size(); ++conInfosIndex)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue(
 "QE_ServerDescription"
 ,getConfigFile().getDBDataSourceConnections());
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("SSOKEY", "");
 logonProps.putStringValue(
 "Server"
 ,getConfigFile().getDBDataSourceConnections());
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName(getConfigFile().getUNVConnectionUserName());
 newConInfo.setPassword(getConfigFile().getUNVConnectionPasswordDecrypted());
 dbController.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 newConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 } // end for on conInfosIndex
 clientDoc.save();
 } // end for on reportIndex
 } // end if on newInfoObjects
 } // end for on queryPageIndex
 } // end try
 catch(ReportSDKServerException Ex)
 // handle...
 catch(Exception Ex)
 // handle...
 finally
 getCms().commitToInfoStore(newInfoObjects);
 if(clientDoc != null)
 clientDoc.close();
</pre>

Getting error while importing the data using loadercli

Hello,
I want to copy the data using export/ import via (loadercli).
scenario:
1) I have 2 server and i want to export data from old server and import in to new MAXDB server using loadercli.
I have done this once and it went fine , but now I want to do the export import again so i will have te latest data on the new server.
when i tried to do that it gives error that the table already exist . Can i use loadercli to import hte data again ?
can any one help me in this ?
Regards,
Bhavesh

> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars

Getting Error while accessing the data using odata service

Hi All,
Iam new to SAP FIORI.
Iam getting the below error while accessing the data using odata service.
"Failed to load resource: the server responded with a status of 404 (Not found)"
"No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin "
i have tried all the solutions like changing the url pattern "proxy/htttp".
and disabled - security in chrome (Chrome is Updated version).
i tried with IE still got the same problem.
And installed all the required software in eclipse
While installing GWPA plugin i got the following error.
let me know if any one have idea.
Thanks in advance.

> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars

While creating the Data source for Sql server am getting this error?

Hi i new to Power BI sites and office 365,
For my first step
1. i have successful creaeted Gateway in Office 365
2.Now i have creating the Data source for that gateway using Sql server R2
3.While Creating the Data source using the Corresponding gateway i have given and next phase set Credentials phase i have noticed one pop up window and it will shows me like
Data source Settings and below in that window it will show's u the things like
Datasource Name.
Loading......
Credentials type:
Privacy Level:
Failed to verify parameter
I will get this results finally ,so hw should i achive this probelm ,Please let me know if any one knows
So kindly give me the proper answer for this.
Regards

Any suggestions for Chinnarianu?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Query regarding the data type for fetcing records from multiple ODS tables

hey guys;
i have a query regarding the data type for fetcing records from multiple ODS tables.
if i have 2 table with a same column name then in the datatype under parent row node i cant add 2 nodes with the same name.
can any one help with some suggestion.

Hi Mudit,
One option would be to go as mentioned by Padamja , prefxing the table name to the column name or another would be to use the AS keyoword in your SQL statement.
AS is used to rename the column name when data is being selected from your DB.
So, the query Select ename as empname from emptable will return the data with column name as empname.
Regards,
Bhavesh

Is meta data used for SEO if so how dose it work ?

Is meta data used for SEO? I would like to know how to create meta data for SEO use. I found this on a form with the label mete data for SEO. Can anyone help me understand what the parts of this code are used for?
<title>epecho | The visual works of Danel Roldán</title>
<meta name="verify-v1" content="+Yjk73MkziQFeIPyBcJtgXwi2LcwfLnAMazU0KtigIA=" />
<meta http-equiv="content-type" content="text/html; charset=utf-8" />
<meta name="description" content="epecho is a creative studio founded by designer Danel Roldán in 2004. Located in New Jersey, epecho serves clientele locally, nationally and internationally.
epecho focuses on logo design, corporate and brand identity and works closely with providers of multimedia, illustration and production of internet and print marketing campaigns. For more information please contact epecho. For a direct quote, please complete and submit the online application form." />
<meta name="keywords" content="logo, logos, logo design, logo designs, brand, brands, branding, brand design, brand designs, design, designer, graphic, graphic designer, danel, danel roldán, roldán, jersey, new jersey, geneva, lausanne, cross, genève, graphiste, logotype, font, type, typeface" />
<meta name="author" content="Danel Roldán" />
<meta name="copyright" content="(c) 2009 epecho" />

Vinay has given you some good links, but I'll add a little bit more :-)
<meta name="verify-v1" content="+Yjk73MkziQFeIPyBcJtgXwi2LcwfLnAMazU0KtigIA=" />
That is a verification code, supplied via google if you have signed up for the WebMaster Tools:
https://www.google.com/webmasters/tools/
It allows you to check some stats etc., once you have added the verification code to your page.
The only other Meta Tags you really need to use are the <Title> tag and the Description tag.
The rest of SEO is making sure that the web pages are SE friendly. Not many SEs take into account all those meta-tags these days.
Make sure that keywords are scattered through the pages, make sure that the <h1> and <h2> heading tags use words that are important to site as they help with SEO as well.
SEO can't be mastered in a day - there are people that do this full time and even they are constantly learning new ways to ensure good rankings in the SEs. :- ) It's not dificult, but does take persistence !
Google's SEO Starter Guide (PDF)
http://www.google.com/webmasters/docs/search-engine-optimization-starter-guide.pdf
High Rankings Advisor
http://www.highrankings.com/newsletter/
SEOMoz.org - Beginner's Guide to SEO (1-page html)
http://www.seomoz.org/article/beginners-1-page
SEO Chat
http://www.seochat.com/

Extrcting the data used for building a Dshboard in Xcelsius to internl tabl

Similar Messages

Maybe you are looking for