Extreme antenna not visible, but connected to internet

hi. i'm fully connected to the internet via airport extreme, but if i open the airport admin utility, it can't see nothing (i've 2 airport extreme and an express). why? what can i do? iTunes also miss the express and i cannot stream music...
OS updated with sys update.

are you connecting to the same router for the ethernet and wireless connections?

Similar Messages

  • ITunes content not visible when connected to internet via wireless

    I have been having problems with my Apple TV. It did not show any iTunes Store content. After some considerable attempts at reconfiguration, I finally restored to factory settings and I still could not connect to the internet via my airport extreme wireless network. I therefore ran an ethernet cable instead and all the itunes store content appeared and I was able to sync with my Macbook Pro. I then looked at the network configeration using the ethernet recorded the settings and took the cable out. Then reconnected using the wireless connection, initally it could not connect to the internet but then I went through the manual connection and set the settings using DCHP and it then connected but once again there is no iTunes store content, if I reconnect the iTune store content comes back as does the uTube and internet radio both of which also disappear if I try and go wireless. Any thoughts?

    are you connecting to the same router for the ethernet and wireless connections?

  • My iPhone 3gs is not able to connect through internet. I have a Airtel wireless at home.Phone connects through wireless but not opens any page or itune or apllications

    My iPhone 3gs is not able to connect through internet. I have a Airtel wireless at home.Phone connects through wireless but not opens any page or itune or applications.

    Hi,
    can you provide a bit more detail, as can you use the 3G network to access the web, and what security is your wireless using?
    Regards
    Ryan

  • Thinkpad- T61 - Not able to connect to Internet either by cable or Wireless

    Hi Friends
    I'm having a T61 Thinkpad and yesterday i had tried system restore, but it has not done any changes,
    But then, I'm not able to connect to Internet either by cable or by Wireless.
    When i pressed Thinkvantage, i could see the Hardware wireless is on "OFF" status and I'm not able to turn it ON
    Can anyboby help me on fixing this issue and enable connect to INTERNET
    Thanks in advance
    Regards
    Sasi

    Hi,
    can you provide a bit more detail, as can you use the 3G network to access the web, and what security is your wireless using?
    Regards
    Ryan

  • HT204409 I have a MacBook Pro and not able to connect to Internet? PLEASE help!

    I have a MacBook Pro and not able to connect to Internet.  I have other HP comp and iPad and am able to connect.  I have contacted AppleCare....they said disconnect router and leave unplugged for an hour, which I did...still no connection.  Any suggestions?  Thanks!

    Call Apple Care back & tell them their suggestion did not work. 
    Solution may be found if you search in the "More Like This" section over in the right column.

  • The wi-fi button on my iPad 2 is not functioning.  I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory.  What else can I do?

    The wi-fi button on my iPad 2 is not functioning.  I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory.  What else can I do?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Not able to connect to internet usig LAN

    hiii
    i have domain network which is connected through LAN for all the user machines now suddenly what happened we don't know all the machines are not able to connect to internet and domain also.
    help me to get out of this problem
    thanks in advance
    with regard's
    haasan 
    thanks & regrds sri ram

    Hi
    I think we need bit more information regarding this issue.
    You've said machines are not able to connect to Internet and Domain. Two different things are you not able to log on to the domain with your domain user accounts.
    Are the Domain Controllers are up and running or have you checked if your switchs are working properly.
    Please update with the above then we can help further.
    Thanks
    Umar

  • I am not able to connect to internet using Firefox. I have Un-installed and reinstalled Firefox again, but still get the "Cannot find server" message. For now I'm using Internet Explorer but I would like to go back to using Firefox. Thanks.

    I lost connectivity to internet thru Firefox a while ago. Contacted my ISP and we tried many things before discovering it was a Firefox issue, not a modem or router or browser issue. Even after uninstalling/einstalling Firefox fresh, I still cannot connect to internet and get the "Unable to connect- Firefox can't establish a connection to the server at www.yahoo.com" message.

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls

  • Not able to connect to Internet (Safari pre-set websites, YouTube, i-Tunes)

    I am not able to connect to the internet, even though it appears I'm getting wireless on the iTouch. Have read numerous threads, nothing I have done has worked (tying to match my iTouch wireless settings to my Windows laptop settings, restarting router multiple times, choosing other under networks and trying to reset up my router config, trying to connect to IP using http://192.168.1.1 and/or http://192.168.1.1).
    So get message "Cannot Connect to iTunes store", "Cannot connect to YouTube", and "Safari can't open the page because it can't find the server".
    On my wirless settings (note my router is a Netgear DG834GB and works fine on both Windows based laptops in our home):
    - My home network is checked;
    - Under DCHP, BootIP, and Static all fields BUT router, search domains, client ID are checked.
    - HTTP proxy is currently set to Auto with URL blank.
    Apologies, been trying to read through threads to find the answer that will get me going, but either haven't found it yet or things like installing firmware (where do I install it, on my laptop or itouch, etc?) I don't understand what exactly needs to be done to do that.

    disable wireless security on your router and see if you can connect

  • Airport Extreme files not visible on USB drive.

    Airport Extreme files on Toshiba USB powered drive not visible through Windows. I disabled antivirus with no change. If I copy files onto it they go but then disappear. If I copy again it asks if I wish to overwrite the file as its already on the drive I just can't see them there. I tried another computer, also Windows 7, on our network with the same results. It is formatted as Fat32 and is recognized by the Airport. It is a 1TB size drive.

    double post.

  • Not able to connect to internet in boot camp

    First time using a mac computer so I decided to install vista on my macbook pro. But when I enter Vista I am not able to connect to the internet, I have looked through the leopard and vista discs trying to find the right files so I can use the internet. So any suggestions on how I can connect to the internet using vista?

    After Vista installed, did you insert the Mac drivers CD (if you're running the beta Boot Camp) or the Installation DVD (if you're running Leopard)? Without the Apple-supplied drivers you probably won't have a lot of things working right.
    Doug

  • Not able to connect to Internet with TC

    Hi, trying to change my network set up and my TC not allowing me to connect to Internet.
    I have
    Motorola modem SB6121 connected to Comcast as ISP and working fine
    TC connected to modem and via Ethernet cable to my mac mini (OS10.7.5)
    Connecting to Internet on TC using DHCP
    Network is on router mode DHCP and NAT though suspect this is not the issue.
    Time cable has green light
    Internet is amber on airport utility.
    Any help or advise much appreciated.
    Tks

    So, I went through **** too with the SB6121 and my relativel new Time Capsule (2TB ME177LL/A). I had an adsl-2 network with the timecapsule as the router (in DHCP/NAT Mode)feeding to a NETGEAR ProSAFE 16-Port Fast Ethernet Desktop Switch (FS116) which distributed ip addressed to  hardwired ethernet outlets through out the building.
    Everything was fine until yesterday when I upgraded the net to faster COMCAST Business service. The tech installed everything and we connected the ethernet from the SB6121 to my timecapsule and nothing. I fooled around and in bridge mode it would work but not in DHCP/NAT. I went through every possible reconfiguration, reset, shut down, web search I could. There is ZERO info on the Web about this problem. Spent three hours or more on it yesterday. This morning I broke the code.
    disconnect the devices, e.g. remove the ethernet connection between the two devices
    connect a mac directly to the SB6121 and reset to factory default
    enter 192.168.100.1
    go to configurations
    choose reset to factory defaults
    disconect the mac from the SB6121
    Go back to the time capsule
    using airport untility (6.3.2), connect to Time Capsule
    go to the internet tab
    select Static on the "Connect Using" pull down
    tab to each data entry field and ERASE the contents of the fields
    choose UPDATE
    after update is complete go back and set connect using to DHCP
    be suure you have Router Mode set the DHCP and Nat
    choose UPDATE again
    now plug the ethernet from the SB6121 into the WAN port on the Time Capsule
    Voila !!! It worked.
    Good luck to all of you.

  • Please Help - WRT54GS "not able to connect to internet"

    I just purchased a WRT54GS Wireless Router, and I follow the instructions by putting the CD in first, and I follow the instruction on the CD, but every time I try and set it up a message comes up and says "The router is not able to connect to the internet." blah blah.  And I've tried resetting the router, turning the DSL modem off and back on, restarting the computer, unplugging and plugging back in over and over, and I still can't get it to work.  Any advice would help.  Thanks.

    1.Make sure you have good internet with your pc direct to the dsl modem
    2. If so, connect the router to the DSL modem and tthen the pc to the router.
    3.then open a web page and enter 192.168.1.1 no user name but the default password is "admin"
    4.You may have to turn on PPoe on the basic set up page and it will also need your sign on and password. put those in.. leave the rest defaults. Save the settings and then try on home icon on your web browser to see if you can get to the internet.
    Message Edited by jet75080 on 01-14-200707:25 PM
    Steak is my favorite animal.

  • Time Capsule not visible when connecting via range extender

    Hi,
    I have configured a TP-Link WA750RE to expand the range of my Time Capsule's wireless network. The range extender works fine for surfing the web etc., but the Time Capsule doesn't show up as my Time Machine backup device and the Time Capsule is not visible in my Airport Utility. What's even stranger is that when I click on "Configure other" (shift + command + o) in Airport Utility and type in my Time Capsule's IP-address and password, I can still access the devices' configuration menu.
    When I move my Macbook very close to my Time Machine to connect directly to the wireless network, leaving out the range extender, none of the above mentioned problems occur. The TP-Link range extender has no NAT or port configuration that could possibly cause this problem, so I'm out of ideas for a way to solve this problem.
    Thank you in advance for your help.

    A non-apple range extender is not passing the protocols that apple uses.. eg bonjour.. This is a standard problem and why you stick with using Apple's own routers for extensions.

  • WRE54G & WRT54G : RE is not visible. Connected w/wire then lost it.

    I couldn't connect the WRE54G conventionally or rather wirelessly. I even had it on top of the router but it was not visible. I connected it with a Cat5 and finally located it. Set it up and then thought I was ready to go. My computer does not see the RE anywhere! I gave the RE a different name. Was that right? I'm starting to wonder if my computers wireless internal card is bad....help.

    The Wireless Settings of your WRT54G and the WRE54G should be the same. If you have assign a different wireless network name to WRE54G is will not work.... WRE54G is a Range Expander and it will expander your existing wireless network.
    Make sure the wireless settings of your wre and wrt are identical and it will work 

Maybe you are looking for

  • Can report print clob and interpret the content

    Hi, we use reports and forms 9i on Linux. During the development of our application we faced one problem: users were using MS Word prior to our solutions, so they are used to manipulate with text( bold, underline, font....). We tried to enable them t

  • Validation on selection screen parameter.

    I have select options in my selection screen. 1) s_a 2) s_b Requirement:- 1) If I run the program and click the arrow on the "s_a" field, it should open multi selection screen. From that I can make multi entry or upload data from excel file. 2) If "s

  • Abort/Exit 3rd party program

    Hi! I've developed a test system that flashes a device via a 3rd party flasher (hardware and software). Sometimes the 3rd party program freezes or crashes for an unknown reason, can be hardware or software. I communicate with the 3rd party program in

  • Audigy SE: advantages to using CD softwa

    Any advantages to installing the software that came on the CD with an Audigy SE (I just installed the drivers)? Or is it bloatware? Thx.

  • File Permissions with 10.6

    Hello there, I have the exact same problem, and have followed the directions, but for some reason when I click on the gear icon, "Apply to enclosed items..." is grayed out. Is there something else I have to change? Also, I have a side question, is th