Extreme base station worked, but no internet,... now locked out.

Situation:
Cable modem connected to Extreme base station. Powerbook G4 with 10.3.9 and iMac with 10.3.9 connected by airport to base station. This has been working for more then a year. This morning I had no internet connection on the G4 or the iMac.
Actions taken:
- resarted base station -> no result
- restarted modem -> no result
- checked connection to Base station -> good wireless connection; I could ping the base station, but nothing beyond
- connected Powerbook directly to modem by cable -> internet works
- checked settings base station -> base station seemed to obtain a normal IP address trough the modem
- hard reset of base station -> no result
- upgraded firmware to 5.7 -> got message "An error occurred while reading the configuration." when using the airport utility
- tried using password 'public' -> same message
- connected by cable to base station -> same message
So things certainly didn't improve since this morning. What else can I try?
regards, Wim
Powerbook G4, iMac Lime   Mac OS X (10.3.9)  

Thank you Will,
Today I upgraded the airport software on my Powerbook and was able again to connect to the Base station and use the airport utility. But I still could not connect to the internet.
Your post made me rethink my troubleshooting. I did restart the modem, but never disconnected it for more then a few seconds. I just tried it again, left it unconnected for over a minute and now it works again.
So thank you very much, your reply was very helpfull.
Regards,
Wim

Similar Messages

  • This really *****,.I just bought a ipod 5th gen,...it was stolen,..i got it back,..but i am now locked out because of icloud lock,.please help

    this really *****,.I just bought a ipod 5th gen,...it was stolen,..i got it back,..but i am now locked out because of icloud lock,.please help

    Take your original proof of purchase from an Apple authorized retailer (or Apple Store) and the police report, make a Genius Bar appointment at your nearest Apple Store and they should be able to help you.

  • Help - Kodak 5300 printer doesn't work w/ Airport Extreme Base Station

    Hi All,
    Running a MacBook on OS 10.4.11 (airport extreme card) and an I-Book on 10.3.9 (airport card) - just bought an airport extreme base station and a Kodak 5300 all-in-one printer. Base station works fantastic with internet and both CPUs. Kodak printer works great when directly connected to laptops by USB. When printer connected to USB port on Base station it recognizes printer but wont print. Set-up printer with Bonjour settings - but printer won't print with WiFi. "Printer not responding" window appears. Have phoned Kodak support. They tell me the printer should work on Wi-fi but I should contact Apple. Have phoned Apple support - they're stumped. Kodak website recommends using a Silex wireless router with this printer and claims it is compatible - so it can handle wireless set-ups.
    Has anyone out there had success with the Kodak 5300 and the Airport Extreme Base Station? It's a great printer that uses very little ink (inexpensive cartridge replacement). I really don't want to fall back on my old Epson.
    Thanks for any thoughts/solutions.

    Hi Ron! Thanks for checking inside Kodak. I agree as a first printer from kodak it's a good one, and I certainly appreciate the attempt to buck the industry-standard of milking the customers on ink.
    However, I'm not willing to go buy a silex device, when I already HAVE a device: the apple airport. I also got a reply from kodak support indicating that they didn't want to comment on future products, etc etc. Maybe I'm misreading this by assuming product == hardware, but I'm certainly not willing to ditch my current printer for a newer model for what I consider to be a DRIVER issue (I could be wrong of course). Maybe a firmware issue, but certainly not a hardware issue.
    What I expect from Kodak is a new driver and/or firmware that would make this work with the apple airport. On the one hand I can understand not wanting to divulge company secrets and upcoming "products", but for a newer driver, I would expect to hear a "we're aware of the problem and are working on a fix". That would go MILES towards making me more patient and less irritated with Kodak. Telling me to wait for newer "products" or go buy a silex is a good way to loose customers.
    So if you have any internal clout (or a message board), be sure to raise cain there for them to do the right thing.
    jan
    P.S. At the current time of writing, the silex website is not operational ("This site is temporarily unavailable. Please notify the System Administrator"). Way to go silex!

  • How to get this Airport Extreme base station to produce a wireless network?

    I had this Airport Extreme base station working fine at the house that I moved from a couple of days ago.
    After my house move, however, it seems that the AE base station isn't producing a wireless network. My wireless laptop isn't detecting a wireless network. Also, the left hand side light on the AE base station is not lit.
    The AE base station was softly cushioned during house the move.
    Regarding configuration:
    My non-wireless iMac (running 10.3.9) connects to the AE base station via an ethernet cable.
    Before my house-move, I regularly connected wirelessly via the AE base station from a couple of wireless-equipped laptop computers.
    I was using AE software version 5.6. (In desperation, I have just updated to version 5.7 - but that hasn't improved or changed situation.)
    At the new house, I found that I had to reset the AE base station back to factory settings before I could successfully connect to the internet through the AE base station from the (non-wireless) iMac.
    Since resetting the AE base station at the new house, I can also print via a USB printer that's plugged into the AE base station.
    I just cannot pick up any sign of a wireless network from the AE base station.
    G4 Powerbook   Mac OS X (10.3.9)   Problem started while I had Airport Extreme software v5.6. No improvement/change after v5.7 update.

    Sorry for my delay in closing this issue.
    I got the wireless network running again - though I'm not sure which of a "litany" of separate actions (which I gleaned from dialogs in several similar postings for similar issues to mine) was the solution. I suspect it was one of the following two actions, which have stuck in memory:
    1) I relocated a nearby cordless phone cradle/charger/base-station from alongside the Airport Extreme base station to about seven feet (two meters) away. However, the cordless phone is about eight years old, and I believe its radio frequency is far out of the range that I have read (in similar postings) can interfere with the Airport Extreme base station.
    2) I re-set the Airport Extreme base station, (a) by depressing the tiny reset button at the rear of the base station for more than 5 seconds (until the led started blinking), (b) from Utilities/AirPort Admin Utility/Configure/Restart. However, I had reset the Airport Extreme base station those ways previously without that restoring the wireless network. Also, I didn't record the sequence of the multiple resets and the configurations at the times of the resets.

  • Airport Extreme Base Station and Playstation 3 with MediaHome

    I have tried setting up Nero 8 MediaHome with my ps3 and my dell with apple airport extreme. The playstation sees the media server but the files are empty. I think it has something to do with the airport not being able to so uPnP. Has anyone got this to work?
    All the support I have found is for mac os x or for a diff router. I have been trying to get this to work forever and it always shows blank folders. I have also tried TVersity Media Server and the same thing happens. Please Help!

    My experience with TalkTalk -
    My original TalkTalk set-up was using a Netgear DG834G (in modem/router mode), this provided a very stable direct broadband connection but the wireless distribution around my house was weak.
    Initially I tried to extend the wireless distribution by adding a Netgear RangeMax WPN824, and although I got a much better wireless signal I started to observe frequent dropping of the broadband connection. In the end I gave up and decided to go the Apple way and use the Extreme Base Station.
    Now the Extreme Base Station is connected via the DG834G (operating in modem only mode).
    The Extreme Base Station works well and is a joy to set up (of course) and is being used as WDS together with an Airport Express that I also have.
    This works well, most of the time, but I still get frequent dropping of the broadband connection.
    I think that this is more likely to be the Netgear modem and/or phone line than the Apple Base Station - but frustratingly I still haven't got to the bottom of the problem yet.

  • Airport Utility cant connect to Airport Extreme Base Station, Error code -4

    I am unable to use my Apple-product. Earlier it worked, with these settings: The Airport Extreme Base Station worked as a Gigabit switch and an Access Point. It was not supposed to work as a router, since I have a server "on the far side" of the AEBS.
    In any case, it worked for a while. Then it started to act strangely, so I tried to check its settings. I was unable, so I did a factory reset. And haven´t been able to connect (for configuring) since. (It still works as a router and access point, but with the default settings, and with a blinking yellow led.)
    When I use the Airport Utility (5.5.1) connected with a cable it finds nothing. Should I be able to configure it wired? When I connect wireless to the default "Apple Network XXXXXX" it finds the Airport Extreme "with default settings". I click "continue" or "Manual setting", and it says "Detecting wireless Apple Devices" (bear in mind that I translate the messages from swedish, It might get wrong), and then after a minute:
    An error occurred while trying to access the base station. Make sure your network connection is valid and try again. Error Code: -4
    I have shut off the firewall in both Windows and Panda Cloud Office Protection. I have tried to make lots of factory resets.

    See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

  • External hard drive on Airport Extreme Base Station - need some help!!

    Can you suggest an external drive make and model that works with the extreme? Need around 300 gb?
    What format should the drive be in so my Windows Vista and Windows 7 and my mac will be able to backup to it?
    What backup software do you recommend that I run on my Windows Vista and Windows 7 PC to it?
    Thanks

    Can you suggest an external drive make and model that works with the extreme? Need around 300 gb?
    There are literally dozens of external USB hard drives that will work with the 802.11n AirPort Extreme Base Station (AEBSn), but of course, not all. Please check out the following iFelix site to see some that are not recommended. FWIW, I currently use both a Newertech miniStack v3 (750 GB) & a Western Digital MyPassport (500 GB) with my AEBSn without any issues.
    What format should the drive be in so my Windows Vista and Windows 7 and my mac will be able to backup to it?
    HFS+ for the most efficiency between the AEBSn & the drive(s). Note that the AEBSn's file server will support both AFP & SMB when communicating between Mac & PCs (respectively) for file services. If you don't have a Mac, you can always format the drive in FAT32. Only NTFS (or any of the Linux partition formats) will not be supported by the AEBSn file service.
    What backup software do you recommend that I run on my Windows Vista and Windows 7 PC to it?
    I use Genie - soft's Genie Backup Manager, but just about any backup software that supports network-attached drives for backups should be fine.

  • Airport Extreme Base Station Portscanning my System?

    Bought the AEBS today and got it set-up in about five minutes; very nice. I then moved on to another (and completely different) problem, which involved opening system.log. What I discovered thousands of messages that read along the lines of:
    "Aug 3 17:13:13 My-Computer kernel[0]: Stealth Mode connection attempt to UDP xx.xx.xx.3:51539 from xx.xx.xx.1:192"
    where xx.xx.xx.3 is my G5 and xx.xx.xx.1 is the AEBS. I don't know which port number the AEBS started with (hopefully not 1), but it is clearly incrementing by one.
    I was able to learn that 192 is used by the base station for PPP status or discovery, but could not find anything more. (If it is of help, I'm connected to the net via Verizon and a DSL modem. I set up the AEBS using the wizard, which defaulted to PPP over Ethernet.) My questions are:
    - What exactly is it doing?
    - Will it stop once it gets through the full range of port numbers?
    - Can I make it stop? (I realize it's not really hurting anything, but it certainly seems like bad behavior to me.)
    - Will it do this each time I boot my system?
    Any other information is appreciated.
    Thanks,
    David
    iMac G5 Mac OS X (10.4.7)

    Will the airport extreme base station work with WD my cloud 3 tb drive?
    Yes it should work with your AirPort Extreme base station.
    Would I connect it to the airport extreme or could I connect it to my imac ethernet connection.
    You'll want to connect it to one of the available LAN (opposing arrows) ports on the AirPort Extreme.

  • My internet works fine with my wired cable modem, but when i connect to my extreme base station and setup my wireless network the internet no longer works and my apple tv by default

    my cable modem works fine, but when I hook it up to my extreme base station and run through the prompts and set up my wireless network it doesnt work and neither does my apple tv by default. I am unsure how to correct this problem. It will come up saying that I dont have an IP address when I have it set to DCHP so I dont know what the problem is.

    Push the reset button on the modem and power the modem off
    Power off everything else....all devices....order is not important
    Wait 15-20 minutes or longer
    Connect the Ethernet cable from the modem to the WAN port (circle of dots icon) on the AirPort Extreme
    Power up the modem and let it run for 5 minutes by itself
    Power up the AirPort Extreme and let it run for 5 minutes
    Power up each other device one at a time a few minutes apart
    Check the network

  • HT1218 Airport Extreme base station is working, but not visible on network?

    My Airport Extreme base station is working:  all devices are able to connect to the internet, but Airport Utility shows no connection.  Only one computer even shows the device-- greyed out-- saying "Device not Found."  The airport utility shows version 6.2;  OS X version 10.8.3.  How do I update the base station to version 7 if the device can't be found?  And how do the devices connect to the internet without "seeing" the device? 

    Thanks for checking. This model should be visible in AirPort Utility in Mountain Lion.
    If you have not already done so, I suggest that you perform a complete power cycle on the entire network as folllows:
    Power off every network device....in any order you want
    Wait a minute or two
    Start the modem first, and let it run a few minutes by itself
    Start the AirPort Extreme next, the same way
    Continue starting devices one at a time about a minute apart until everything is powered back up
    Check the network again using AirPort Utility
    You can also temporarily connect an Ethernet cable from your Mac to one of the LAN <-> ports on the AirPort Extreme to see if a connection is established that way.
    If still no luck, try another Mac if you one handy. After that, all that I can suggest is that you perform a Factory Default Reset on the AirPort Extreme and configure it again.

  • I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

    I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

    apikoros wrote:
    The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
    1)  I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access.  But do I have to  change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
    Resetting the password you will need to do for each device... the utility cannot even see those old units.
    So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
    2)  Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
    N.Korean hackers.
    [Edit] Whoops-- one more question:  I want to partition the TC's disk, but Disk Utility doesn't see it.  What do I need to do?
    You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
    Look at Q3 here.
    http://pondini.org/TM/Time_Capsule.html
    Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

  • I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

    I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

    When you can, take a look at the old AirPort Express and locate the model number in the faint print on the side of the device.
    If you see A1084 or A1088, this is an older Express version that is no longer supported by the current version of AirPort Utility that you are using with the new AirPort Extreme.
    If that is the case, your Express is at least 6 years old...probably older...so it is about time to treat yourself to a new version with much faster speeds and more features.

  • Mac Book pro can't connect to Internet through Apple airport extreme base station

    I had problems connecting to the internet in the past with my macbook pro.  One day it suddenly started working again but then I bought a second apple TV I lost connectivity.  I have tried changing the IP address manually and while it shows me connected to the wifi I am still with out internet.  When I hooked up the new Apple TV that I bought it booted my computer from it's ip address.  The apple TV though wouldn't work and now nor would my computer.  I ended up setting the Apple TV's ip address manually and now it works fine. My computer on the other hand does not no matter if I set it manually or not.  Even if I plug in the ethernet cable from the base station it doesn't work.  It show that it has a self assigned IP address.  After I set it manually it shows that I am connected both via wifi and the ethernet cable but I can't connect to the internet.  If I plug the modem directly into the computer bypassing the base station I get internet and it is using the IP address that worked originally.
    It has something to do with the connection from the base station to my computer but this is odd considering every other device I have: iPhone 4, apple tv, apple tv, apple mini with retina display all work perfectly via wifi (newest apple tv had to be set manually as I stated above but now works fine).  When I check the ip of the base station itself it seems to be different from the ip of the computer when the computer was connected directly to the router.  I don't understand why my computer now can't connect to the internet via the base station whether it be wifi or by ethernet.  Can you please help me trouble shoot this?
    I have an AirPort Extreme base station which allows up to 50 users and a 30 meg connection speed.
    I have a MacBook Pro (17-inch Early 2009), OS X Mavericks (10.9.2)

    It has something to do with the connection from the base station to my computer
    I don't think so..
    I just posted a reply which totally vanished.. strange strange website now.
    Please post some screenshots of your AE setup from the airport utility.. I want to see the summary page, then the network and internet tab.
    Please tell us what modem you use.. is it a router??
    If you have satellite or 3G wimax etc service they often are limited to 5 IP addresses... the AE takes one and then 4 more devices can join .. no more.
    You need to also give us the screenshot of the IP you are getting in a computer that works.
    EDIT
    Sorry this is half double post.. the previous page refused to display.. now it has returned..

  • 2 airport extreme base stations later and still no internet connection-

    Sorry - yet another beginner with internet connection troubles! (I have read all the posts I could find relating, but without any help).
    I have had a Demon broadband account now for about a month (I’m in the UK) and in that time I have purchased a D-Link DSL-300T Ethernet modem and an Airport Extreme Base Station. I got wireless internet working relatively easily – with a powerful range over the whole house and garden, but then one Sunday night, the internet connection via the base station suddenly ‘died’.
    I spent the following 3 days scrutinising all of my settings of both the Modem and the Base station, re-setting both, and bought new Ethernet cables / micro filters etc but with no luck. (I’ll point out at this stage that my broadband account is still active, and if I connect the Ethernet modem directly to my iBook [wired] I can still get my broadband connection. Alternatively, I tried daisy chaining the modem to the base station and then via an Ethernet cable to an iBook, but no connection could be made).
    When wireless, Airport Admin recognises there is a modem there, and under preferences > network under Airport it states I am connected to the internet – but I’m not.
    I then phoned D-Link and they confirmed my firmware was up-to-date for use with Apple products and talked me through all of the modem settings and tweaked a few things, but there was still no connection to the base station. I then phoned Apple. They were incredibly helpful (as ever) and after 35 min. came to the conclusion the base station might not be re-setting itself properly. The replacement one came yesterday, and again I spent a number of hours trying to get it connected to the internet, but there is still no internet connection via airport and I can confirm this from both my eMac and iBook.
    Reading through the forums on here, I understand that my particular modem is problematic with the base station, but I can’t work out why it use to work and now it doesn’t! One theory I have investigated is that the firmware of the base station is two advance for the modem following an update, but after reinstalling the original firmware I started with, I still have no luck.
    - The eMac is running 10.3.9 / iBook is running 10.4.3. The base station is reinstalled with the latest firmware via system update. The first base station and the modem were delivered to me 31/10/05.
    Any help or suggestions would be really appreciated if anyone has any ideas
    Thanks for your time
    Will.
    UK.

    http://discussions.apple.com/thread.jspa?threadID=2316
    78&tstart=0
    I think if you follow the instructions I gave in this
    link you will be fine.
    Remember, If you for any reason loose your
    connection, it is normally always a Power Issue..Your
    ISP is down for service ..or some other anomoly, If
    you were good before your settings will still be
    good...Good Luck...Don
    Hi Don,
    Thanks for you quick response. I printed off the instructions you posted on the support forum before, and ran through your procedue exactly, (twice) but I'm sorry to inform you that I haven't been able to re-establish my wireless internet connection. Would it be safe for me to assume at this stage that my modem is indeed fualty? It contines to work fine independantly, (I'm using it right now) but it can't seem to make contact with the basestation.
    Will.

  • Unable to access internet via my airport extreme base station

      I have an AirPort Extreme Base Station which is hard wired to a Mac and which communicates wirelessly to a Mac in another room.  My internet access is via comcast.  Direct connection from this computer to my modem works fine, but not if I go through the AirPort.  The LED lights of the AirPort indicate normal network activity, (flashing/on/flashing).  I have tried disconnecting and reconnecting everything and rebooting the computer.  The system has been working normally through the AirPort until today.

    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    (OPTIONAL) Disconnect the AirPort base station from the Internet broadband modem.
    (OPTIONAL) While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    (OPTIONAL) After the base station resets, go ahead and power it back down.
    (OPTIONAL) Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Maybe you are looking for