Extreme Close-up: I can't reset the zoomed display

My laptop monitor is now in extreme zoom mode, and the screen moves in accordance with my mouse. It's just like grabbing a screen with the hand icon, but I just can't drop it. The resolution settings in my system preferences do not help, nor does the restart. I must of turned on some option for the visually impaired - can someone help return the display back to normal?

I found it - universal settings 'zoom' on/off. Wheew .. now I'll go look for the asprin.

Similar Messages

Can you reset the zoom position?

Hi,
I have a series of images taken with different settings and I want to quickly compare them at 1:1 in different areas of the image, center and corners. I have discovered that if I select the series I want to examine and then go to the first image and zoom that image to the position that I wish to when I use the arrow keys to move to each subsequent image will be shown zoomed into the same position. This is great and has been a big help with some testing of lenses.
If I don't ever go to any of the other images and zoom anywhere this works just fine. The zoom location is remembered just for the first image. However, if i accidentally or deliberately zoom on one of the other images it will remember that zoom location forever which breaks the technique described above.
So I am wondering if anyone has discovered a way to remove the remembered zoom location from an image like it is when you first import it into LR?
tks, louie

The zoom position is a sticky between images as you describe. It can be quickly changed using the navigator panel and this will then become the sticky position. I don't think you can presently change this behaviour. If you want to suggest Adobe create an alternate mechanism post on the feature request board, you never know Adobe people may actually look in on it!!!.

Can I reset the default IP address of Airport Extreme?

My old Linksys router is showing it's age and needs replacing (2 of 4 ports no longer work and router requires frequent resets). I want to use an Airport Extreme base station to replace it so that I can then use my Airport Express to extend my network. Can I reset the default ip of the AEBS to match what I was using with the Linksys so that I won't have to change several static ip addresses in devices that don't play well with DHCP?

The AEBS is limited in its ability to use different IP address ranges for connected clients.
The internal or local DHCP range can be set to utilize......
10.0.x.2 to 200
192.168.x.2 to 200
172.16.x.2 to 200
The AirPort Extreme itself would always have a local IP address that would look like....
10.0.x.1
192.168.x.1
172.16.x.1
In other words, the AEBS would always have a .1 desigator by default. This cannnot be changed.

I am having a Startup problem. Someone comes on the screen with Open Firmware to Startup. How can I reset the PRAM myself to solve this problem?

I am having a Startup problem. Someone comes on the screen with Open Firmware to Startup. How can I reset the PRAM myself to solve this problem?

Read these.
http://support.apple.com/kb/HT1431
http://reviews.cnet.com/8301-13727_7-10330118-263.html

A friend created 3 accounts on his iPhone 5 but forgot the passwords. He can't reset the password as yahoo address is no longer valid. Erasing the phone doesn't solve the issue. How to register the phone with Apple?

A computer illiterate friend created 3 accounts on his iPhone 5 but forgot the passwords. He can't reset the password as his yahoo address is no longer valid. Erasing the phone doesn't solve the issue as the Apple server identifies the hardware as registered. How to register the phone with Apple?
I helped him create a new email address and new iCloud account on my Mac but when we try to register the phone with Apple it says: Maximim accounts limit reached for this device. How can he register the phone? I read different threads and found out that only Apple care can do that. We're in Romania and don't know where to call. Any suggestions on how we fix this?

When I checked the support site for Romania, you apparently don't have an Apple Care contact center. You "may" try calling the US Apple care number to verify the account and have the password reset sent to a different email address. 800-694-7466

How can I reset the settings for my Ipod Video on the Ipod source list.

I accidentally choose the 3rd option (do not update video) on the Ipod option button >>> video <<< and for that reason I can't download or play video. How can I reset the setting in order for me to enable to update my Ipod for the videos manualy.
I open itunes and select the Ipod in the source list, then click on the option button and click video. But from there, I can't select the options... please advice ASAP, Thanks...<br>
Pentium iii Windows XP Desktop

Read this and see if it helps:"Syncing videos to your iPod" http://docs.info.apple.com/article.html?artnum=302509

How can I reset the number authorized Macs in my account?

How can I reset the number authorized Macs in my account? Two old Macs that I no longer have are still authorized, which leaves me with three working macs at home.

Hello Joe
You will find your answer on this page. In summary you have to deauthorize each of the 2 Macs on the Mac thenself. If it's no longer possible, then you have to deauthorize all five Macs and then reauthorize each 3 remaining
http://support.apple.com/kb/HT1420
Bye

I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?

I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

My imad 'lol' mini say i set up an icloud account when i first got it and its been disabled everytime i try to reset it it prompts me to a different email how can i reset the origanal

my imad 'lol' mini say i set up an icloud account when i first got it and its been disabled everytime i try to reset it it prompts me to a different email how can i reset the origanal

Hi JackEDupdog,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your Apple ID:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
- Judy

I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do?

I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do? Also, I can not get start up chimes unless I have the factory startup disk in. Can the PRAM be reset with the factory startup disk in or must the mac boot from the hard drive? Need help.

Help for forgotten passcode > iOS: Forgotten passcode or device disabled after entering wrong passcode
When you have access to your iPhone again, FaceTime is a pre installed app that cannot be removed.
Try a search > iOS: Understanding Spotlight Search

How can I reset the CTI for each clip to 00:00?

I'm brand new to this - got Premier Elements 12 yesterday, so please bear with me.
I have clips from a soccer game, each of which starts with 00:00. I have written notes about key scenes in each clip using the time that scene occurs in each clip. But when I add clips to the timeline, each clip's CTI begins at the point where the last clip's left off. So, say I wanted to get to a scene in clip 2 at 0:44. But clip 1, with a duration of 4:30, precedes clip 2 in the timeline . To get to the scene I was looking for in clip 2, I'd have to add the 4:30 from clip 1 to the 0:44 in clip 2 to find my scene in the timeline at 5:14 . Obviously, the problem only gets worse with each additional clip. And near impossible when I trim clips.
One "workaround" I can use is to make a copy of the original clip in project assets, adjust the in and out points in the copy to get the scene I want, save/rename that scene and add it to the timeline instead of the original clip. Each scene would then be renamed and would show it's specific duration in the timeline. But that seems like a lot of work, to have to make copies of original clips in assets, trim them there and take them to the timeline. Back and forth, back and forth.
Is there a way to keep the start and end times of each original clip when I add it to the timeline, so I can isolate each scene in that clip and trim out the unwanted portions without having to do math or spend time making and trimming copies? To be more succinct, Can I reset the CTI at the start of each clip to 00:00 within the timeline?
I hope I've described my issue in a clear way that doesn't cause confusion. If not, please let me know what other questions you have or additional info you need to understand the issue I'm describing. Thanks, and sorry for the long post.

mascott2300
Please take a look at the blog post that I wrote about the gathering, assembling, organizing, and management of clips in a large project.
ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
See if any of the details work for you in your planned Premiere Elements projects.
Also, from the point of view of leaving informational notes in the program, consider the "Comments" opportunities of the unnumbered markers when you place unnumbered markers in the Timeline.
ATR Premiere Elements Troubleshooting: PE11: Forget Me Not Clip Details and Timeline Unnumbered Markers
Please do not hesitate to ask questions or to ask for clarification on anything written.
Thank you.
ATR

How can I reset the DEFAULT zoom view in Firefox at 125%, like IE, so I don't have to reset it every time ?

How can I reset the DEFAULT zoom view in Firefox at 125%, like IE, so I don't have to reset it every time ?
I have seen this question asked previously and it seems there is no answer.
I know that one can change each individual web page (that reset defaults back to 100%) and, alternatively and apparently one can load an add-on to fix the default size at Full Zoom.
... But any hints on how to achieve a DEFAULT 125% zoom would be much appreciated.

Press CTRL + 0
Have you tried Firefox's zoom feature? Font size and zoom - increase the size of web pages
You can "zoom" all sites using this add-on: [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]. After setting your global zoom level, you can still fine-tune the zoom on individual sites.
After installing NoSquint, click the % on the Add-on Bar to call up site preferences, then click the Global Settings button, then the Zooming tab.
If you don't have the Add-on Bar displayed, you can right-click the new tab button ("+") or a blank area of the tab bar to the right of it and choose Add-on Bar from the shortcut menu.
You can experiment with sizes larger than 125%, but I wouldn't go much higher than 150% unless you have a large high-resolution monitor.
If there are particular sites that still present a problem, feel free to post their URLs.
You can find more information about the zoom features Firefox offers in these articles:
[[Text zoom]] - For zooming text only
[[Page zoom]] - For zooming the whole page (including images etc.)

How can I reset the screen colors/resolution on an old white macbook?

My screen shows neon colors and a zigzag shapes. How can I reset the color resolution? This laptop was supposedly fixed but when returned all my data had been "lost". The certified mac tech said he reinstalled the OS but lost all my desktop files and HD and couldn't recover. ODDLY, when I started the machine and started fresh, my old hard drive was still there! Although he'd wiped out my current desktop files- gone. But, the screen colors went wonky all of the sudden and I don't know how to resert or correct the resolution. Can any one share a suggestion?

With that kind of issue after returning from a repair where a tech was inside the computer, it should be returned to the same place for an evaluation of the problem, a diagnosis, and perhaps they need to check their work to see if something came loose while they had it apart.
The System Preferences> Displays has a panel to select settings.
You may have to try & see about a reset of System Management Controller http://support.apple.com/kb/HT3964 Or, if reset of NVRAM http://support.apple.com/kb/HT1379 may help. Not sure if these would do anything if there is hardware damage.
Good luck & happy computing!

How can I reset the value of an array?

How can I reset the value of an array at the beginning of my program?

There is a option in LV,
"Edit --> Make current value defult"
Every time you reopen your VI, it will set to your custom default value.
There are many ways of doing this.
Another way of doing this is, You can use "sequence structure and property node". Make the property node of your array and choose "value". Then mark it to write. See attach.
When you feel sad, laugh
Attachments:
x.GIF ‏4 KB

How can I reset the settings of one Yosemite Account?

Hello. How can I reset the dock, preferences, etc. of only ONE Yosemite Account instead of the whole computer. Yes, I know that I can just make a new account, but I don't really want to do that. Please help.

iOS: Forgotten passcode or device disabled

Extreme Close-up: I can't reset the zoomed display

Similar Messages

Maybe you are looking for