Extreme & Express (hopefully) simple question

Hi
I've got an AEBS that I'm trying to connect to an Express to play iTunes on my stereo. Do I also need a PCI Airport card in my G4 to enable this feature?
I thought the AEBS just plugged into the ethernet socket and acted like an external version of an internal Airport card. The Airport icon doesn't show up in the network connection or menu bar.
Bit of a first timer in the whole wireless connection area, does it show? I guess there's a simple answer, help me people.
Gaz

I've got an AEBS that I'm trying to connect to an
Express to play iTunes on my stereo. Do I also need a
PCI Airport card in my G4 to enable this feature?
No.
I thought the AEBS just plugged into the ethernet
socket and acted like an external version of an
internal Airport card.
You're perfectly right.
Here is how your chain should be connected:<pre>
Ethernet AirPort stereo cable
Mac ======== AEBS ~~~~~~~ AX ------------ stereo</pre>
The Airport icon doesn't show
up in the network connection or menu bar.
That's normal. You don't need an AirPort connection from
your Mac to your AEBS. You may use the Ethernet connection.
Your will have to configure your AEBS through your Ethernet
connection.
I advise you to carefully read your documentation about
the way to make such a configuration.
dan

Similar Messages

Dynamic select --hopefully simple question

I have read alot of threads on doing a dynamic select. I am have no knowledge of AJAX so this is tough for me. I have looked at Denes and Carl's examples. I have one question and I hope its a simple one. I have two select lists. The second field is dependent on the input from the first box. I know we put a query that should bringin the on demand process but is this query the result for the second box or do I need to put the same query in the LOV box for the second field?
For example, the first select list contains module names, based on the module name the user picks, the names in the module should populate the second select list. In the lov for the first select list, I have a query for the modules. In the on demand process, I have a query that takes uses the module name to look for the users, and in the the second select list, I have the query that does the same thing as the query in the on demand process. What do I put in the lov for the second select list.

Nevermind, I downloaded firefox and was able to see what variable wasn't working...

Hopefully simple question. Event ID 2 Task Category (2) Lenovo Message Center Plus Admin

Hey group,
Wanted to ask you guys what I was missing. In my event log as the title implies I have a Event ID 2 Task Category (2) error in Lenovo Message Center Plus Admin coming as a result of a 404 error. Issue is I don't know what page it is looking for when it is tossing me the 404 error. Is this a result of Lenvo Updater goofing up using the ADM templates for GPO or is this something else? Would be helpful if it registred the non working link it was trying to obtain so we could isolate it better. Thoughts on this? Thanks!

try this when you download the file save it to your download folder then right click it and run as admin. it says there is no Lenovo Digital Signature I tried to install it didn't work but I did it this way and it worked
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

(Hopefully Simple) Question - Launching Apps.

So, this is probably an incredibly simple thing, but I have to ask...
At some point, while using OmniGraffle, I did something that is now causing my initial "Create a Template" / "Open Existing File" to pop up on my 2nd monitor. This is driving me a little crazy and is interrupting my workflow.
Any idea where I configure this preference so these types of menus start popping-up on my main monitor again?
Thanks in advance.

Close the app and check the Preferences folder in your user account. Toss whichever .plist file is obviously named for OmniGraffle. Don't delete the old .plist quite yet. If the issue doesn't change when you restart the app, then you can put the old file back instead of having to redo all of the application preferences to your liking.

Hopefully simple question on keywords.

When I do a keyword search thru the drop down list and I have for example 6 words checked off, how can I clear the checkmarks in one shot. I have a lot of keywords and sometimes forget to uncheck one . Thanks

Un-checking then rechecking the checkbox to the left of the rule doesn't clear the selections made from among the keywords (as the OP puts it "clear the checkmarks in one shot") for me (3.4.5 on 10.8.5). Did this change in Mavericks?
No, it did not change.
It disables the keywords temporarily and I add a second rule. I do it sometimes, if I want to switch quickly between two sets of keyword selections and want to save the old selection.
The option-click method is cool

Few questions about Airport Extreme/Express

I have a few questions about Airport extreme/express:
1 Can you access hard drive trough express?
2 I have cable NOT wireless modem. What would be the best option (speed-wise) to connect to internet- connect modem to Extreme and access internet wirelessly from it? To connect modem to Extreme and imac?
3 How fast is read/ write from hard drive connected to Extreme?
4 How many hard drives can you connect to Extreme (or Express if that is possible)?
5 Can you remotely sync Ipod nano/ shuffle using Extreme?
I really hate wire clutter around my desk. What I intend to do is to connect hard drives and printer to Airport Extreme and access them remotely. That would leave empty desk:).
Thanks

1. You cannot connect a hard drive to the Airport Express USB port.
2. The speed of wireless networking is faster than the speed of most cable internet services. Therefore, you won't notice any difference in your internet connection speed between (a) a cabled connection directly between Mac and modem or (b) a wireless connection between Mac and base station and modem.
3. Apple has not published any specs on the speed of hard drive access for the Airport Extreme N Base Station. Several people have posted their own measurements (do a search in this discussion forum), and generally those results are not very good.
4. Apple has not placed a limit on the number of drives you can attach to the Airport Extreme N Base Station (with use of a hub). How many do you want to connect?
5. You cannot remotely sync an iPod using the Extreme Base Station.

A very very very simple question

Hi guys,
I have a very simple question and standard but I cant find anywhere...
I have two dateTime variables, i need to calculate difference between this dates in days, thats it.
I tried all functions and tried without success a Java Embed task but I couldnt retrieve this objects as java.util.Date so I couldnt calculate exactly the difference in days like this pure java code:
(dataVencimento.getTime() - dataReferencia.getTime()) / 86400000L)
can you help me this?

Hi Jose
Just see if these alternate approaches works. I know there may be lot like this and you may be lucky to find out simple out of box solution itself. If you want to solve this issue and move ahead, gives these approaches a shot.
1. Create a very simple standalone WebService that takes 2 input date elements (can be of Date type or String type. If string type, convert to date in your java code). Create a simple operation like getDaysBetween(firstDate, secondDate). In the generated webservice impl class, use the java code apis (refer earlier link for usage), and get the difference. Return this value. NOW, invoke this WebService in your BPEL Process, and pass your 2 inputs (if the bpel payload elemetns are date object or string objects of date), and get output, and then use this output in your continuing bpel process.
2. This approach, I did a long back. When we insert any expression using XPath, in that editor window on bottom right side, we see many categories and for each category we see list of functions we can use, like for String, we can use concat etc. I vaguely remember reading somewhere, that we can add our own custom functions also in this section. So explore this direction and see if you can add your own function and then use that fucntion with your 2 input dates.
I have not given solution to your problem, but may be these directions can help you move ahead. Or something along these lines.
Thanks
Ravi Jegga

Hopefully easy question...

I am new to TestStand and have a couple of (hopefully) easy questions. I am using TestStand 3.5.
1) I have written a couple of sub-sequences in another file that we use for common tasks. Some of the parameters we pass will always be the same variable name. Is there a way I can get that default parameter name to show up when I write the program to call this sub-sequence so I wont have to enter it each time?
2) When I run a program that calls a sub-sequence in the above file, the first time I run it, I get an error saying the resource already exists... If I open the sub-sequence file in TestStand, and then close it, it is fine after that.
Thanks for your help!

With TestStand the answer is usually 'yes' it is just a matter of which way is best for you.
1)
TestStand has a full application interface so that you can pragmatically read parameter names and types, and populate calling programs with the right stuff. This takes some learning. There may be an easier way depending on what you are doing.
I'm not sure what you mean when you say you write a program to call the subsequence. In TestStand 4.0 ( don't have 3.5 installed) you can create a Sequence Call template step that can be used in new sequences that you program. That is, I can open a new sequence, drop a generic Sequence Call step and rename it, configure it to call your subsequence by choosing the right path, sequence file, values/expressions to be passed to the subsequence, and then I can save this step as a template (drag to the Step section of the template window). Then, when I have a brand new sequence, I can drop an instance of this template step into my sequence, with the parameter values preconfigured. Assuming all the expressions are valid, you're ready to go.
2)
Without more information I can't help with this one. Perhaps the sequence file that contains the called subsequence is not in one of your search directories (see Configure>>Search Directories) and therefore it can't be found until you open, identify and save the calling sequence file. What error code are you getting?

A simple question about performance!

Hi! I have a simple question about performance. Suppouse that you have a servlet or a class with DB access, and you need to use a value several times in that page. What is best, to assign the value from say, a resultset or a request.getParameter() to a variable or to call the resultset or the request every time you need to retrieve that value? Which option uses less memory, which is faster, etc.?
Hoping the best fou u
Raul

If you need more values from a db, the best is to open some connections (connection pool) and use the for accessing the db.
To get the data only once, open the connection, get the data, store the data whereever you want: variable (class), hidden control (if you want to send from one page to another by request) and close the connection as quicky as possible.
The advantage of the first method is that the most time consuming activity (connections opening) is done only once.

I am unable to see my Airport Extreme/Express on my MacBook via Airport Utility

I have two issues:
1. I am unable to see my Airport Extreme and my Airport Express via my MacBook Air's Airport Utility when I scan for Base Stations. However, the computer is happily connected to the wireless network of my Extreme (the Express is used to extend range)
2. I am unable to see a HDD that is connected via USB cable to the Airport Extreme.
Any suggestions welcome.
Thanks

Further info:
Setup
MacBook Air running OS X 10.5.8
AirPort Extreme Base Station
AirPort Express used to extend range
AirPort Utility v5.5.3
The MacBook Air is actually connected to the wireless network provided by the two AirPorts!
Oddly, I see both AirPorts just fine when using my older PowerBook G4 with an older version of the AirPort Utility.
In addition, I cannot see the external HDD connected to the AirPort Extreme Base Station, and my wireless printer (HP D410a) suddenly stopped working via the MacBook Air. However, it works just fine from my iPhone, which is connected to the same AirPort Extreme/Express wireless network.
Recently, at the request of Sky Broadband, I switched to fixed IP addresses instead of DHCP, as I was having issues with the DHCP set-up.

I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4. Question 1: Does this model have a PCI Express slot? Question 2: Can I upgrade my USB2 port in this laptop to a USB3 port? Appreciate your help & advice..

I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4.
Question 1: Does this model have a PCI Express slot?
Question 2: Can I upgrade my USB2 port in this laptop to a USB3 port?
Appreciate your help & advice..

No & no.

Current Year and current month?simple question

How can i get four Digit current Year and two digit current month. So if is march it should get me as 03 and the Year as 2002. Please do help me, is a simple question isn't it ?. Thanks for your earliest response.
Thank you.

i have a directory structre of the format
REPTS2000209/E200209-98000001
in which 2002 is current YEAR
09 is current month
and 9800001 is the code i would submit(list box) from a form
so what i need is a program that can generate the above path and open that particular PDF file
so basically E200209-98000001.pdf is the PDF file.
i am submitting it from JSP page. PLEASE HELP ME how can i program.

This might be a simple question. On those sites that do not differentiate between models when on the internet I.e. Facebook when after your comment and you cannot hit "enter" on an iPad for examp. And speed is slow to connect. What is = to post?

This might be a simple question. On those sites that do not differentiate between CRT, laptop, tablet etc. such as an iPad Mini and using the Facebook site fir example when going to post a comment and you do not have a enter button on the IPad and the speed is slow how do you get your comments to post if we do not have a enter button?
<Email Edited By Host>

I don't have facebook so I cannot answer but for your personal security, I have asked the hosts to remove your e-mail address. It is very unwise to publish this.

A simple question on random number generation?

Hi,
This is a rather simple question and shows my newbieness quite blatantly!
I'm trying to generate a random number in a part of a test I have.
So, I have a little method which looks like this:
public int getRandomNumber(int number){
        Random random = new Random(number);
        return random.nextInt(number);
    }And in my code I do int random = getRandomNumber(blah)...where blah is always the same number.
My problem is it always returns the same number. What am I missing here. I was under the impression that nextint(int n) was supposed to generate the number randomly!! Obviously I'm doing something wrong or not using the correct thing. Someone please point out my stupidity and point me in the right direction? Ta

I think the idea is that Random will generate the same pseudo-random sequence over and over if you don't supply a seed value. (The better to debug with, my dear.) When you're ready to put an app into production, the seed value should be the current system time in milliseconds to guarantee a new sequence with each run.
Do indeed move Random outside the loop. Think of it like a number factory - instantiate it once and let it pump out the random values for you as needed.

A simple Question about % in CR Chart!

Hi, I have another simple question.
When i use SQL to storage data and wanna Crystal Report to display the data in chart using %
which data type should i use?
float or string?
and I found when i use 0.12 as 12% in database , It could not display in Crystal Report line chart normally.
What should I do??
Please Help!!!
Thank you VERY MUCH!!!

If you have the datatype as string from your database then try adding the string field as a summary field in chart and select maximum instead of count and if you have them in number format then you can directly select the percentage in chart.
Regards,
Raghavendra

Extreme & Express (hopefully) simple question

Similar Messages

Maybe you are looking for