Extreme memory OC... This is normal?? (6600GT)
I am very surprised with the performance of my NX6600GT-TD128E because this video card is able to overclock the memory from 500Mhz (1000Mhz effective) to 650Mhz (1300Mhz effective) with the stock cooler and without any modification...
The video card is running totally stable at 550@1300 with temperatures of 47 IDLE and 79 Full Load...
This is normal or am i a very lucky guy with a 1.8ns memory???
Quote from: fabianzd on 03-July-05, 11:54:10
I am very surprised with the performance of my NX6600GT-TD128E because this video card is able to overclock the memory from 500Mhz (1000Mhz effective) to 650Mhz (1300Mhz effective) with the stock cooler and without any modification...
The video card is running totally stable at 550@1300 with temperatures of 47 IDLE and 79 Full Load...
This is normal or am i a very lucky guy with a 1.8ns memory?
Now just vmod the gpu and replace the hsf with one from a cpu and you`ll have a sweet card.
CPU HSF "ghetto" mod http://www.mvktech.net/component/option,com_simpleboard/Itemid,34/func,view/id,17013/catid,10/
6600GT vmod
http://www.vr-zone.com/?i=1912&s=1
Here`s mine with a 7000 rpm Golden Orb
Running 609/1.15ghz @ 1.58V temps have never gotten past 60c.
Wish I had your mem chips
Similar Messages
-
Extreme Memory Profile & Base Clock - Resolved
Hi,
I am an Eclipse SLI with BIOS v1.4. When I enable the Extreme Memory Profile, the Base Clock option is no longer visable but I do then get a Ratio option. The only was I can oveclock the CPU is to up the Ration from 20 to 21 and then use the Overclocking Centre within Vista.
Is it a case of one or the other? With the XMP enabled, all 12GB of my RAM runs at 1600MHz just fine.
My obejective is to get my CPU to run at 3.2GHz and have my memory running at 1600MHz - is this possible?
System specification as below - Thanks.Hi,
Thank you for your suggestion. In the end I raised the base clock to 161 and changed the memory ratio to 5. This gave me 3.2GHz for the CPU and all 12GB of my memory runs at 1600MHz.
Just for others who might read this, you need to have both the Extreme Memory Profile and the Advanced XMP options enabled, as if you only have XMP enabled the Base Clock option for the CPU is not visible.
One last thing, the Nocutura CPU cooler is amazing. Even under load using Flight Simulator X with the overclocking, my CPU never exceeded 35 deg C, the IOH 63 deg C and the system 26 deg C. -
In new iPad 4g, when sim card is not inserted, I can not find the enable 4g tap in the setting-cellular data tap, can some one please tell me if this is normal and if so, then when it appears, thanks
If the SIM is out of your phone, find my phone needs a data connection, so could use wifi - IF in range of a wifi and one that it can join (ie. a known network or one that is wholly open so no login required). Your phone could also simple be turned off, so not findable, or it may have been restored (plugged into iTunes and restored as new) again, making it permanently unfindable. Honestly, for someone stealing an iPhone, this is likely the first thing they do - restore as new and it is theirs forever.
Find my iPhone is tied to the users iCloud account - the find function is part of the iCloud account's services and it communicates with the iCloud servers over a data connection - either wifi or 3G.
Have you set up your iCloud account on your replacement phone, and is it working properly on that phone? -
I placed an upgrade order for two phones, an iPhone 6 and 6plus.
I was in the Verizon shopping cart at 11:55 and checked out by 12:01 AM pacific time.
I do have my email confirmation for both phones with ship date 9/19
The iPhone 6 has shipped with tracking number and the charge to my card came through for the price of this phone.
There is no other information available - nothing on the status of the 6 Plus. Customer service doesn't know if this is normal or if my order went through, its really bad.
Any further information would be much appreciated.I was just told by a Verizon sales rep that, when her team got in, when she checked the system at 3:03 (midnight+ 3 minutes) all 6Plus had a back order date of October, and now its going into November even though the pre-order system was showing 9/19 - that all verizon iphone 6 plus had an instant sell out.
She had no additional information on my iPhone 6 plus, not even if there was a chance for it to ship out, when the back order date would be - no further information.
(A different rep I talked to said all iphone 6 plus pre orders had a ship date of October, all of them - I asked what Verizon is going to do when they advertised iphone 6 plus for 9/19 delivery and your telling me they never had any available - at this point he transferred me... *****) -
The battery of my macbook died in 2 years and when I call the servise center to inform them cuse i personally am dissapointed but at the same time want to know the reason why something like this has happened ith a product of apple. Mr ****** (sr advisor) gets outrightly rude and tells me sorry but don't think that you can be an exception to it. Extremely shocked at this approach by apple. Then throughout the conversation he chose to mute me and wouldnt answer my queries. And when i asked him whos the serior I could talk to. He tells me "Im the seriormost that you can get upto..there is nobody above me you can talk to".
Now what do i do???
<Edited by Host>By doing so, you are violating the terms of use of this support forum
"Post constructive comments and questions. Unless otherwise noted, your Submission should either be a technical support question or a technical support answer. Constructive feedback about product features is welcome as well. If your Submission contains the phrase “I’m sorry for the rant, but…” you are likely in violation of this policy."
"Breach of the Agreement
If you fail to abide by these terms Apple may remove your submission. Apple may also send an e-mail that informs you that your Submission has been deleted or edited. Repeated inappropriate Submissions may result in your relevant account or accounts being placed into temporary or permanent suspension of your ability to participate in any or all of the areas on the Site."
https://discussions.apple.com/static/apple/tutorial/tou.html -
Hi,
I am working on SSRS 2008 R2. On Preview report in report builder itself, i am getting an error "Attempted to read or write protected memory. This is often an indication that other memory is corrupt".
See my below screen shoot.
Any Suggestions please to resolve it?
thank you in advance !
best regards,
Venkat,
[email protected]Hi Venkat,
According to the error message, I guess that the error occurred when you previewed the report in Business Intelligence Development Studio (BIDS).
Based on my research, I think it may be a Window Layout issue of Visual Studio. Please try the steps below:
Click “Window” button from the toolbar ribbon.
Click “Reset Windows Layout” option.
Click “Yes” to finish the operation.
The following thread is for your reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/90949d68-a611-467c-b438-be97b8ab250b/attempted-to-read-or-write-protected-memory-this-is-often-an-indication-that-other-memory-is
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
I just bought an AirPort Extreme system over this weekend and I am having problem with setting it up. I plugged the cable as explained in the manual but there is no way I can get a steady green light. I all see is flashing amber light. Can anyone help me,
Think you need to provide some more details about what you are connecting
-
Question is in the title. I animate in a traditional style (frame-by-frame) and draw a lot. When I animated in photoshop, the only annoyance was that the interface was terrible in terms of animation flexibility, but performed so much better in terms of actually drawing the frames. I invested in flash because I've heard that it really speeds up the animation workflow, but I'm getting quite irritated by this bug. I never read about it in reviews, and it's not something that I've gotten results for by googling, so I'd really like to know. Is this a normal issue in flash? Or is this something that I can fix? I've been trying to deal with it for a few weeks now but it's reaching a point where I just can't tolerate it anymore. I know I'm posting this in the CC community but I'd really really appreciate it if someone had a fix for this that I wasn't aware of, because otherwise I've wasted a lot of money.
Question is in the title. I animate in a traditional style (frame-by-frame) and draw a lot. When I animated in photoshop, the only annoyance was that the interface was terrible in terms of animation flexibility, but performed so much better in terms of actually drawing the frames. I invested in flash because I've heard that it really speeds up the animation workflow, but I'm getting quite irritated by this bug. I never read about it in reviews, and it's not something that I've gotten results for by googling, so I'd really like to know. Is this a normal issue in flash? Or is this something that I can fix? I've been trying to deal with it for a few weeks now but it's reaching a point where I just can't tolerate it anymore. I know I'm posting this in the CC community but I'd really really appreciate it if someone had a fix for this that I wasn't aware of, because otherwise I've wasted a lot of money.
-
Firefox has extreme memory leak
After using Firefox for several hours, it begins consuming more than 500mb of memory.
== This happened ==
Every time Firefox opened
== I began using Firefox 3.3.6Hello everyone.
This problems are not, in 99,9% of the cases, Firefox's fault. Rather, they are caused by problematic add-ons or third party software. But you do need to diagnose what your exact problem is. Do this:
#run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe-mode] to disable all extensions, themes and plugins. If this fixes your issues, be them with RAM or CPU usage, then you know it's a problem with plugins, themes or extensions. Proceed to number 2. If safe-mode doesn't fix the issues, then read bellow, after this list;
#update all extensions, themes and plugins in your Firefox. If this doesn't solve the issues, proceed to the following number;
#disable all extensions, themes and plugins in your Firefox (not running safe-mode). Being certain that, as in safe-mode, the problems you're having have gone away, enable one plugin at a time. You should be certain that you WANT that plugin to be enabled, so keep your overall number of plugins as low as possible. When you encounter the problems, you know you've found a problematic plugin, so disable it for good. Keep enabling all plugins (except problematic ones) until you've gone through them all.
#enable one extension at a time. Again, be certain that you WANT that extension to be enabled, so keep your overall number of extensions as low as possible. Also, try the theme you want to have installed so see if that is what's causing the problem. When you encounter the problems, you know you've found a problematic extension/theme, so disable it for good. Keep enabling all your extensions (except problematic ones) until you've gone through them all;
#you're done! You've fixed your problems with problematic add-ons. If you want to keep using those problematic add-ons, please contant their author for support.
Ok, if disabling all extensions and plugins through safe-mode didn't work to bring Firefox's CPU and RAM usage to good levels, then you have different issue. The most likely scenario is that you have a third party software running on your computer that is messing with Firefox. Do as follows:
#try reinstally Firefox. No data will be lost. You can get the latest version for free at [http://www.getfirefox.com/ getfirefox.com]. If that doesn't fix the problem, proceed;
#do a virus/malware check on your computer. If this doesn't fix it, proceed;
#disable all software running in the background that you don't want to have running in the background (in windows, this is done by pressing WINDOWS+R in your keyboard, typing "msconfig" (without the commas) and pressing enter. Now, under the "Startup" tab, you can uncheck the software you don't want, and reboot your system for changes to take effect. If you're unsure of what software you want running, ask someone with more experience). If this doesn't fix your issues with Firefox, proceed;
#check your firewall/antivirus/security suite for enabled functions/features that you don't want and/or may be conflicting with Firefox. You'll find that these features are most likely tied to Internet Security features, such as link scanners or URL checkers and the like. If you're not sure they are conflicting with Firefox, simply try to disable them to see whether or not that's true. As long as you don't browse the web with your antivirus completely off and your firewall completely turned off, there should be no problems. If this doesn't solve the issues, proceed to the following number;
#check your operating system security options, mainly advanced options that are not configured by default. While it's very unlikely that this may be the cause of the problem (after all, it's the last item on the list), it's remotely possible. If this doesn't work, proceed to the following point;
#clean up your OS registry, using appropriate software. If this doesn't do it, I'm out of ideas. Except make sure you've followed my instructions correctly. -
Hi i received the nano 7th gen for Christmas and I only seem to get 5 hours of battery life. I use the Bluetooth and Nike app so I expect more drain on the battery. But I got more time out of running with my iPhone. Does this sound normal? I thought I should get close to 30 hrs of just play time alone.
ALso, my wife got me the Belkin armband to run with the nano but I sweat through the band resulting in the back of the iPod to get wet. Surely this is not good. Anyone have a recommendation for an armband that keeps moisture away from the pod?iPod Nano are small and they don't use Wi-Fi access so you get less power time on a Nano. As for iPhone, since you got apps, Wi-Fi + 3G access, and everything else, they give you more time so you can keep using. Nanos are ment to listen to music, listen to radio, view your photos, watch videos (without Wi-Fi) and since you got BlueTooth on the nano, it counts as wireless access so it drains your battery faster.
-
While networking with labview 8.5 it gives error"not enough memory for this operation" ??
hi
i m working with the labview networking for the first time, when i ran my code it worked well 4 sometime . but after some days, it started giving error " not enoug memory for this operation" when the data reaches at 'typecast' tool (refer my code). my OS is winXP and RAM is 496MB. how to solve this problem?please reply soon .Hi JAhmed,
Looking at your code, there may be a memory issue with the way you are type casting the string output from your TCP Reads. Since you are type casting a string to a number or array, you are not giving an indication of how much memory to allocate for this data, and I would suggest instead using an Unflatten From String VI. Use this VI the same way as your Type Casts, but for the input that reads "data includes array or string size?" create a false constant value because your data does not include this information.
Regards,
Stephen S.
National Instruments
Applications Engineering -
Dear All,
While adding customization addon, the below error shows.
The below credentials ,
SAP B1 -- 9.0 Version
Patch level -- PL 06
DIAPI -- 32 bit (x86)
"Attempted to read or write protected memory. This is often an indication that other memory is corrupt".
Please fix this issue ASAP.
Thanks & Regards,
Bowya S SHi,
Please check SAP note:
1988581 - Unable to update UDT
Thanks & Regards,
Nagarajan -
Attempted to read or write protected memory. This is often an indication...
I receive the following error when debugging, but not when running the release version of my .NET 2.0 program:
"Attempted to read or write protected memory. This is often an indication that other memory is corrupt"
It's quite bizarre! I dont really know what else would be needed, but I can provide DLL versions etc if someone asks. Ive posted this in Ora/MTS forum because it only seems to happen when using a transaction on the client sideHi I have similar issue. Like others, it seems that the error returned by oracle make ASP.NET (w3wp.exe) to have runtime error.
In my case, it occurs about once every day, consistently. The ASP still work even after runtime error but start to take up high cpu usage after 2nd and 3rd time of error, and totally crash (no reponse to the client request) after 3 or 4 times of errors. It recovers back after the server is restarted.
The following is from event log of my server.
Event Type: Error
Event Source: ASP.NET 2.0.50727.0
Event Category: None
Event ID: 1334
Date: 1/15/2009
Time: 10:10:02 AM
User: N/A
Computer: AXMAN
Description:
An unhandled exception occurred and the process was terminated.
Application ID: /LM/W3SVC/1/Root/rais
Process ID: 5984
Exception: System.AccessViolationException
Message: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
StackTrace: at System.Data.Common.UnsafeNativeMethods.OCIServerAttach(OciHandle srvhp, OciHandle errhp, Byte[] dblink, Int32 dblink_len, MODE mode)
at System.Data.OracleClient.TracedNativeMethods.OCIServerAttach(OciHandle srvhp, OciHandle errhp, String dblink, Int32 dblink_len, MODE mode)
at System.Data.OracleClient.OracleInternalConnection.OpenOnLocalTransaction(String userName, String password, String serverName, Boolean integratedSecurity, Boolean unicode, Boolean omitOracleConnectionName)
at System.Data.OracleClient.OracleInternalConnection..ctor(OracleConnectionString connectionOptions)
at System.Data.OracleClient.OracleConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.PoolCreateRequest(Object state)
at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
------------------------------------------------------------------------------- -
Hi there, I'm having a weird issue when I try to connect to my DB server from the machine in which is located.
I am using SSMS to connect to the DB. When i use the name of the sql server, I can connect without issues, but when I replace the name with an IP address and a port, i always get this error:
===================================
Cannot connect to 192.168.1.215,1433.
===================================
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Data)
Program Location:
at SNINativeMethodWrapper.SNIClose(IntPtr pConn)
at System.Data.SqlClient.SNIHandle.ReleaseHandle()
at System.Runtime.InteropServices.SafeHandle.InternalDispose()
at System.Runtime.InteropServices.SafeHandle.Dispose(Boolean disposing)
at System.Runtime.InteropServices.SafeHandle.Dispose()
at System.Data.SqlClient.TdsParserStateObject.Dispose()
at System.Data.SqlClient.TdsParser.Disconnect()
at System.Data.SqlClient.SqlInternalConnectionTds.LoginFailure()
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
But this only happens when I try to connect from the PC in which the sql server is, when I try to connect by TCP/IP from another machine on the same network, I can login without problems.
Any help will be appreciated.Hello,
Lot of similar issues related to your post please check if any one is of any help
Attempt to read write protected memory
Similar issue answered here
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
My TechNet Wiki Articles -
Unknow error message: Attempted to read or write protected memory. This is
Hi,
I am using 2007B PL08. The following are my coding:
Dim oCompanyService As SAPbobsCOM.CompanyService
Dim oCompanyAdminInfo As SAPbobsCOM.AdminInfo
Pub.User.Company.NameEng=oCompany.CompanyName
I can run the above coding properly yesterday but there is no reason that i got the following message suddenly today
Interop.SAPbobsCOM:Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
1. I try to re-boot the machine
2. I try to connect the program to another testing database
3. I try to re-install the DIAPI
I did all the above steps but the message still coming out. Anyone can help??
Regards,
AnnaI have experienced this same error, and also found that reinstalling the DIAPI or deleting the temporary folder did not work.
However, I was eventually able to fix the problem by removing removing the reference to the DIAPI from my .NET project, removing the associated Interop file, and adding the reference again, thereby forcing .NET to re-create the COM wrapper. This fixed the problem, and I suspect that my code was calling a method that, although it existed in the Interop file, did not map correctly to the actual DIAPI COM object that was installed on the machine.
Hope this helps someone - I know I was happy to find a solution to this very frustrating problem!
Maybe you are looking for
-
OnMouseOver displays Tooltip from hidden column of classic report
What: The Goal: Make easily available more information than fits on one line of the screen without using multiple fixed lines. Background: Classic report with 18 data items (columns) visible. Has Search box and user can choose number of rows displaye
-
Views dropdown on list view web part doesn't work
Thank you very much beforehand for any help with this issue, I really can't figure out what is going on. So, I have big list (36125 items and about 25 public views there) and view selector on list view web part just stopped respond there couple of da
-
Laserjet p2055dn is slow printing pdf files using mac
My Mac is very slow printing pdf files on my hp laserjet p2055dn. I have noticed fixes for this problem for people using Windows. Is there a Mac solution?
-
My dreamweaver cs5 site not displaying correctly
Having a css issue on this site http://mianbusinesslink.com/newsite/ When I add the two banners on the sides the content in the middle goes down. I have tried floating and clearing still no success. The banners are in an outerwrapper div and the rest
-
I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility? Most of the dis