Extreme poor quality in full screen preview and exported movie

I have spend evenings and evenings to create the content of a project.
After dealing with error -108 and extreme poor quality in full screen preview and in exported movies (extreme stuttering) I decided to install my iMac new again.
The error -108 disappeared, but the extreme stuttering still remained in full screen preview and in exported movies.
If I make the preview screen in the iMovie browser as big as possible there is nothing to see of any stuttering.
Now I am getting pretty annoyed and have no clue what to do anymore (how to solve this problem) .....
Anyone any suggestion ?
The orginal video was recorded with a Panasonic HD camcorder.
I do have a mid 2011 iMac with 16GB ram and 256GB SSD and 1TB HD with a complete clean installation
of OS X Lion and iLife. This configuration should be enough to create a proper movie :-(

mantralightroom wrote:
why is it this option disabled? do the generate monitor sized previews increase a lot the cache a lot!
Potentially, yes. The standard Preview is 1024 pixels, longest size. Some people (like Omke) have displays 2560 pixels longest side, potentially increasing file size by over 500%.

Similar Messages

  • Bridge cs6 why do the photos have poor quality in full screen preview ?

    Hi
    windows 7 64bit , bridge cs6
    well i load 20mp or 22mp pixel photos , raw and jpg
    i select the images i want to watch and with the spacebar i go in full screen preview
    but in fit to screen they look bad  , i mean with no crips , no details
    but in full screen preview 100% the photos look great
    why ?
    is there an option to watch them in fit to screen , full screen preview with a great quality
    thanks

    mantralightroom wrote:
    why is it this option disabled? do the generate monitor sized previews increase a lot the cache a lot!
    Potentially, yes. The standard Preview is 1024 pixels, longest size. Some people (like Omke) have displays 2560 pixels longest side, potentially increasing file size by over 500%.

  • Full screen preview and slideshow are blurry / fuzzy

    Hi folks-
    I just upgraded from CS2 to CS4, in part to improve efficiency of selecting photos - I wanted the zoom and loupe features. Unfortunately a very basic function has been compromised and I'm hoping there's a solution: In both full-screen preview and slideshow the full-screen image is notably blurry. This is a problem for two reasons: 1. I can't judge pictures accurately by just flipping through them in full-screen mode (without zooming to 100% to see if they are well-focused). 2. I can't use Slideshow for, well, slideshows. I've had to resort to keeping another app (like Windows Picture Viewer) open just to be able to quickly flip through and evaluate images full-screen or to show slideshows.
    I've tried setting all the options related to image quality (they mostly have to do with caching thumbnails and speeding 100% viewing); I've tried purging the cache files. Nothing helps.
    Any ideas?  Thanks!

    It seems to me that there is something wrong with it.
    I am trying Bridge CS4 as a viewer for my JPEG files.
    I also noticed that the previews were fuzzy. I activated the high-quality previews as well as the option to generate the previews at screen size.
    Here's what I noticed. I went to check out a specific photo that is quite sharp with a number of straight lines, angles, details, where it's very easy to detect a lack of sharpness. That photo immediately looked fuzzy to me, which didn't jive with my memory of it. I quickly opened it in other viewers, which displayed it as intended with all the expected sharpness.
    So, I went through the settings to see where the problem could be and I immediately thought of checking the box to get software previews instead of hardware, restarted the app, purged the cache, tried again. There my photo had recovered its sharpness, or at least most of it. I thought I found the culprit, but not quite.
    I went to browse other photos and found one in particular with a lot of fine detail (hair) and that photo also didn't display all the sharpness that it should have (I was still using software mode). The difference was very slight and to make sure of it it required A/B comparison between Bridge and PS, but there was a difference.
    Now I tried the opposite. I went back to hardware rendering mode, restarted, purged the cache, tried again. That second photo looked alright in preview, but the previous photo looked fuzzy again.
    So, it doesn't work the same way for each photo...
    What's the main difference between the first photo, obviously fuzzy in hardware mode, and the second one, alright in hardware mode but slightly fuzzier in software? The ratio. The first one is a vertical photo, the second one is horizontal (close to square).
    I quickly checked other vertical photos and they showed the same behavior...
    Now staying in hardware mode, I noticed something else. When I preview the vertical photo and click on it, or double click, it quickly jumps, switching between 2 versions of the photo: the one displayed originally (fuzzy) and another one, with a very slightly different size, which is sharp. During that manipulation it also briefly displays "100%" at the top of the screen. It doesn't stick when you click and immediately switches back, so it looks like a glitch.
    Now in software mode, I tried the same, this time you can click once on the photo (which is originally displayed *almost* sharp). When you click once, it displays "100%" but also displays a very slightly smaller version that is clearly fuzzy. Clicking again goes back to the other, less fuzzy one, but doesn't display "100%" this time.
    Doing the same test on horizontal photos shows no change that I can see.
    So, it seems to me that in the preview mode, Bridge has trouble displaying some photos (vertical ones?) in their actual resolution (100%)
    and since there is a slight resizing going on, it brings fuzziness. This doesn't explain the very slight fuzziness seen on horizontal photos in software mode.
    Now I'll mention, for those still awake, that I saw no fuzziness on the same vertical photos when I go to Review Mode with *hardware* rendering. Photos there are sharp. Now if I go to the review mode with software rendering enabled, vertical photos are not 100% sharp (akin to the small difference I mentioned earlier while in software mode), while they are sharper in preview.
    To sum up, it seems that the only configuration that gives me consistently 100% sharp (=as they were meant to be after post-processing) photos no matter what their orientation, is when I stay in hardware rendering mode and use the Review Mode, instead of preview.
    This all really smells like a bug.
    For info, I am using Windows 7 and an ATI HD4850 card, and this only about processed JPEG files, not RAW files.
    Perhaps the preview is really meant as a quick preview and not a tool to view final photos at 100% accuracy...

  • When safari is in full screen mode and I move the mouse to the top of the screen to bring up the menu bar and the bookmark bar, it does nothing.  Is anyone else having this issue?

    When safari is in full screen mode and I move the mouse to the top of the screen to bring up the menu bar and the bookmark bar, it does nothing.  Is anyone else having this issue?
    Thanks

    I just tested that since I hardly ever use full screen mode, this was the first time since I upgraded to Mountain Lion, and it worked fine for me.
    Try shutting Safari down and see if that changes anything.
    If that doesn't change anything, try shutting down and then rebooting.
    Allan

  • Extremely slow navigation in full screen mode and other erratic behavior

    Hi,
    Is it me or every new release of PSE feels heavier and more bloated than the previous?
    I have PSE9 running on a dual core, one year old dell PC with W7 with 4GB of RAM. I have the maximum amount of recommended memory alloted to the program (set in preferences).
    Ever since I upgraded, moving forward (or backward) to the next pic (via pagedown, or up) through the filmstrip in fullscreen mode has become very, very sluggish. Sometimes it just will not move to the next image even when thi image is in the same directory as the previous one.
    Is this sluggish navigation normal? Or is there something that I can do to improve performance??
    I look at images in fullscreen mode to decide which ones to edit and which ones to delete so I use this feature a lot. Another example of sluggish-- or in this case erratic-- behavior happens when looking at an image in full screen and then I decide to edit the image. I load the image to the edito by clicking the editor icon on the left options pane. Even if the editor is already open, sometimes it brings the editor to the ferground with the image ready to be edited and sometimes it does not; I have to cycle with alt-tab to make the editor active. Why this erratic behavior? Then, after saving an image and selecting the close button, you are supposed to be returned to the organizer... well this happens sometimes, other times I have to manually swithc using alt-tab.
    Please help, this is very annoying.

    Pabloelchico wrote:
    ...I then import these as managed reference files into Aperture.
    I don't understand whether you have a Referenced-Masters Library or a Managed-Masters Library. Drives slow as they fill and with a Managed-Masters Library sooner or later the internal drive will become overfilled. I recommend a Referenced-Masters Library with Masters on an external drive and the Aperture Library on the internal drive.
    iMacs, laptops and Minis are by definition limiting to heavy Aperture usage, so work carefully to optimize setup and workflow.
    First is to max the RAM and make sure the hard drive stays less than 70% full. Restart the iMac prior to a major Aperture session and only have Aperture open. You should also investigate to see if a substantially more powerful video card is available at reasonable price.
    Set Preview size to be exactly screen size and build Previews manually when the box is otherwise not being aggressively used.
    HTH
    -Allen Wicks

  • Full screen preview image quality?

    I've recently taken up the 'Creative Cloud plan for Photoshop customers' and am getting to grips with Lightroom for the first time; previously I've used CS6 and Elements 9 & 11.
    However, I have a problem with the quality of full screen previews of images on my secondary monitor, similar to the problem I encountered with Elements 11, discussed in another thread here: http://forums.adobe.com/message/5358611#5358611   (the full screen preview whilst OK was not as sharp with PSE 11 as with PSE 9 due to a different algorhythm used the produce the preview quicker)
    I also use FastStone viewer & that too renders the full screen previews much sharper. It seems that with Lightroom too, full screen previews are just not that sharp - OK but not bitingly sharp. I've even noticed that when opening an image for editing in LR, it doesn't look as sharp as if openined in Photoshop CS6 or CC.
    Any thoughts folks? Is there a way to make full screen previews sharper? Of course it could be argued i suppose that PSE 9, FastStone & CS over-sharpen... or even that the 'problem' may not be so apparent on another monitor ( I have my full screen previews on a Dell Ultrasharp 20" 1600 x 1200).

    Hi,
    The way full screen slideshow is currently implemented Muse is resampling the hero images to the size they are in Design view. For most cases that will work fine, but there's no easy way to force a higher resolution image to be output. The only workaround that comes to mind would be to replace the image after publish/upload/export.
    Hope this helps.
    Regards,
    Aish

  • Why does my brand new HP Officejet 5740 have extremely poor quality scan results?

    My brand new HP Officejet 5740 has extremely poor quality scan results!  
    Excessive and unacceptable amounts of white specs appear in the resulting  jpegs, of what are  perfectly clean, orignal, dark,  documents, pages and  photos,  when placed into the scanner.  Why is this happening???
    Has anyone else experienced this problem?  If so, how did you resolve it?

    Hi @mpstone1,
    Welcome to the HP Support Forums! I see you are not happy with the scan quality on your new HP Officejet 5740, when you scan something you are getting alot of white specs.
    I would like you to first perform a Hard Reset on the OJ 5740:
    1. Unplug all cables and memory cards from the printer. Unplug the power cord, directly from the back of the printer while the printer is still turned on.
    2. Unplug the other end of the cord from the power source.
    3. If there is a power module on the power cord, disconnect one end and reconnect it.
    4. After 60 seconds, plug the cord directly into a wall outlet (not a surge protector or battery backup as they can cause the printer to lose basic functionality over time).
    5. Plug the power cord into the back of the printer.
    6. The printer should automatically power back up. If it doesn't, turn it on with the power button.
    7. Try making a photocopy (if your printer is an all-in-on printer) before connecting any other cables to the printer.
    8. Connect any other needed cables to the printer.
    Please continue here: Vertical Bands, Lines, or Streaks in Copies, Faxes, or Scans, complete the steps listed, make sure the scanner lid is fully down when powering on, do not lift the lid until the printer is fully initialzied.
    If after the troubleshooting has been done the copy quality has not improved, contact our technical support at 800-474-6836 as it may be the hardware and you would still be in warranty. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Jpeg editing and problem full screen preview

    Hello,
    I am editting some jpegs together to music and in order for my photos to stay sharp, in sequence settings i have kept the compressor and pixel aspect ratio the same as the images when i look at them in item properties.
    So they are compressed by photo jpeg, square and none field dominance.
    The problem is that when i drop new photos into the timeline, they now need to be rendered and im not sure why?
    Also, when i full screen preview on my imac monitor, you can hear the audio but cant see any images until you pause the movie and then the place where you have paused is shown.
    Can anyone please help???
    Regards,
    Michael

    michael gibson wrote:
    Hello, i change the compressor from photo jpeg to dv pal as didnt have prores lt.   All frame rates and dimensions are the same but i dont really understand field dominance and what progressive means?
    No ProRes? What version are you using? Anyways, using DV might get you some slight problems as it's not exactly square pixels ... but it should be negligible.
    Field dominance tells you which field (a "half frame") is displayed first when playing back interlaced media. Interlaced video does not have full frames but each frame is composed of two fields, each of which has half of the horizontal lines of the full frame. DV's field dominance is upper, all the other interlaced formats are lower field first. If you set the field dominance to "none" in FCP you get a progressive sequence, meaning you'll have full frames.
    You're saying that you changed to DV PAL ... are you in PAL Land? Also you didn't say what your final output will be ... File based? DVD? Web? If there is only one output you should adjust your sequence settings for that.
    mish

  • Elements 10 organizer Full Screen Previews

    Hello, i have a question to ask about the full screen previews of very big photos in size (2mb and above 3000k + res or maybe even smaller) on 15.6 Inch laptop (not quite sure if it is related to my own screen size 1366x768 - i think it's not)
    You see, if i go normaly into a folder and start a full screen preview of those same pictures i get them in what i think is a process of puting some AA to the picture so that even on a small screen i don't get the jaggies on the edges and overall bad quality. Quite the irony since the picture is in extremely good quality but viewed on a small res screen. Now i might be wrong about the AA but never mind i think you get the point what im talking about.
    The problem is in elements organizer if i enter  the full screen preview big photos have those jaggies and are not applied with the AA i talked about earlier. A Funny thing is that when im not in the full preview the very same photos are in very good quality. Can i transfer that process to the full preview ? I really don't want to view my photos in windows default preview. Also if in full screen i try to zoom those pictures i get some nice choopy slowdowns on my i3-370M 2,4GHz, 4GB ram DDR3 and AMD 6550M HD in Win7 64 bit. Strange since i don't have those in windows default but maybe that related to all the processing you can apply to the picture when viewing it in organizer so it's not a big deal.
    To put it simple is there any option so that i can view my albums in organizer (full screen) with the quality of a normal preview. Thanks very much.

    Thanks for a quick answer but that doesn't work for me. I see the actual shortcut to the full screen view and edit is F11. I used mouse or a button earlier. If i use F11 on one photo or more it's still the same image quality. I did a little comparision and even in the normal preview there is a difference with the windows normal preview. Let me show you i did 2 screenshoots:
    This is the Elements Organizer 10 Preview :
    http://img37.imageshack.us/img37/1997/elementspreview.png
    This is the Windows Preview:
    http://img855.imageshack.us/img855/5016/windowspreview.png
    You see how the second picture is more blured than the first one. Now i know that for editing the actual pixels and sharper more crisp image is better, but for viewing (showing albums to my family ) is more better if blured and the picture looks great no matter it's size. Can this be made possible within the Elements Organizer preferences. I did set preview size to maximum which for me is 1280x960 (max allowed). Don't know what else i can do. If at the end it can't be made different, il need to use the default windows
    EDIT: i can't embed the images on the forum so up are direct links.

  • AE CC - Timeline expands to project length after full screen preview

    This seems to have only started happening recently, and it's a pain. After you preview an effect in full screen, the time navigator brackets are pulled to the very start and end of the video. You return from a fullscreen video preview to see your timeline extended over the whole duration of the project.
    Is there some way to turn this off? I frequently work on small sections of a project, regularly watching full-screen previews to check how various changes look, and after the tenth or so time what starts as a minor irritation becomes completely infuriating. It seems like something easily fixed, but I've had no luck finding out how.
    Thanks in advance.

    Ah, okay, this is a more interesting problem than I thought. Sorry I didn't put that info in before; my assumption was this was a poorly-considered feature which could be easily turned off and I was just too dumb to figure out how.
    I'm on Windows 7 x64, running AE version 12.2.1.5 (as far as I'm aware this is the latest version). I haven't done anything dramatic with my PC lately or with AE settings. If it helps, I'm running with: an Intel Core i7-2600 CPU @ 3.4GHz, 16GB RAM, using an Nvidia GeForce GT530.

  • Can't check photos to import in full screen preview

    Hi All,
    Bit of a frusting bug, unless I misunderstand it,  but when I import photos using Aperture from a SD card, I can only do so in the tiled view (max 9 photos to a screen on my 21" Mac)
    I'd much prefer to select the files to import in the much larger single photo view so I can see them better before deciding to import.
    As in the screenshot above, there is a check box in the single photo preview, to the bottom left, but it doesn't seem to do anything. Only photos checked in the list or tiled view are added to the photos to be imported.
    Any ideas why this doesn't work (or what the check box in the single photo preview is for if not this??)
    Thanks in advance.

    Just to be clear, it might be easier to screenshot!
    I tick the checkbox in the large import preview - notice the import checked remains greyed out - it doesn't recognise it:
    If I then go back to the grid view. The photo is still checked, but Aperture still doesn't recognise that it is to be imported:
    However, if I stay in the grid view, remove the tick and add it again, Aperture import does recognise it and adds it to the import list. I can now use the import button.
    Not the end of the world obviously, but when going through hundreds of photos, it would be very handy to scroll through full screen previews with the arrow keys so I can see them better and check them to be imported as I go.

  • Full screen preview drops frames

    Hi all,
    A continuation of the thread I opened here (with hardware specs for information):
    http://forums.adobe.com/thread/657008?tstart=0
    Whilst I resolved the tearing issue secribed in the previous thread I still can't get smooth playback on the third full screen preview display and I'd like some basic advice as to what I could do:
    A couple of things I have tried - firstly I tried a basic sequence with a spinning graphic (in order to rule out any issues with disk/network access), and then also tried two screens rather than three (so only one graphic card was in operation), a 60p/30p project with screens set to 60Hz and a 50p/25p project with screens set to 50Hz.
    All to no avail - the full screen preview drops frames, especially with 50p content - 25p is better but every 20 seconds or so frames are dropped. Audio is always fine, regardless of the source, BTW.
    As a reminder, this is a 12 core i7 with 2 x Quadro FX3800, all unnecessary services disabled, 12Gb RAM, CS5 5.0.3, latest WHQL Nvidia drivers.
    Not sure if 5.5 improves this in any regard as I'm still waiting for my licence key.
    Video playback outside of premiere is perfect, 1080p50 plays fine full screen on any display through windows media player/VLC.
    Any suggestions please - again I wonder if a Blackmagic Intensity or similar would help?
    Has anyone else seen this behaviour? Could anybody have a go a reproducing the issue (a simple spinning or sliding jpg demonstates the issue easily and simply)
    Thanks all
    Sacha Goodwin.

    There exist no 12 core i7's. The max is hexa-core, but in your previous thread you said Xeon X5670. So what is it?
    Well spotted, my bad - it is indeed 2 x hexa-core X5670's - which of course is 12 cores in total.
    I still suspect your Editshare NAS.
    I'd say unlikely since - we've replaced it with something else, also:
    I tried a basic sequence with a spinning graphic (in order to rule out any issues with disk/network access)
    and at any rate I tried it as a local project on local disks and it made no difference.
    For graphic read plain color matte and basic SD res JPG (same results with either)
    What happens when you increase memory to 24 GB?
    No idea as I don't have access to any - strikes me as odd though to think anyone would need 24Gb or RAM just to display a rotating still smoothly.
    Premiere is showing 300Mb of RAM, total RAM in use when everything is loaded and running is 3Gb, 9Gb free sitting there twiddling it's virtual thumbs.
    BTW I should also mention that this happens even on SD projects, not just HD ones. Also watching the task manager shows virtually CPU usage, no disk and no network access during playback (as I would expect). No peaks in any graphs correllating with the dropped frames. Also enabling/disabling MPE Hardware assist makes no difference.
    Sacha.

  • Exposing the Image Filename in Bridge Full Screen Preview?

    While in the "Full Screen Preview" if I enter "5" on the numeric keypad the filename and five stars appear in the lower-left hand portion of the screen.
    Is there any way to make the filename appear without entering a label value?  (if the image was already rated, entering a "5" would overwrite the original image rating)
    Thanks!
      brian

    Thanks Yammer, but the same issue holds.  The picture appears, but no filename (or rating) until you assign a rating (by hitting the numeric "9", for instance), and then the filename and rating remain as you view other pictures.
    I am simply looking for a way to have the filename be present without having to apply a rating (which would have the adverse affect of overwriting the existing rating).
    THANKS!
      Brian

  • Full screen preview in AE CS6

    Hi everyone,
    I'm testing the CS6 trial right now before to purchase, and I'm wondering how can I get Full Screen preview on a monitor.
    I just swithed to Lion on a Mac Pro, with 2 graphic cards. I have 2 monitors for my user interface, and I have a great third monitor with Color Space management feature. This configuration was working last week with Snow Leopard and CS5.5, but not anymore with Lion and CS6.
    Why?
    What I was doing: I was diging into Preferences/Video Preview, I was selecting Computer Monitor Only, and from there, in the Output Mode I was able to select my monitor.
    Now when I come here, in CS6, it's grey and I can't select anything there...
    Any idea?
    Thanks in advance

    May simply be a compatibility issue with whatever graphics card you are using and/or Apple's Cinema Desktop stuff in a more general sense... pöerhaps Dave and Rick can shed some light on this. I'm not a Mac guy, after all...
    Mylenium

  • Adobe Bridge full screen previews look horrible??? Any ideas???

    OSX finder previews and ViewNX look tac sharp????? I have scoured through other forums and have found this is a known issue but none of the tips are working. Full screen previews still look horrible!!!

    Have already played with all the Preference settings as recomended by other forums with the same issue.....

Maybe you are looking for