Extreme tearing with FP 10.1

Hello everybody!
I've got extreme tearing when i stream video with Flash player 10.1. It's the same problem in IE8 and Firefox. I have no problem watching 1080p with WMP and also no problem streaming with WMP. But, as I mentioned, when using Flash player the tearing is extreme.
The hardware acceleration is working fine CPU is about 15% when using both Flash and WMP. I have been trying everything I can, but just can't solve the problem. The computer is completely new. I have an older laptop without any problems (Flash player 10.0)
I hope someone here can help!
Windows 7 64-bit
IE8 32-bit/ Mozilla Firefox 3.6.3
Flash player 10.1.53.64
Computer is Nvidia ION with the latest graphics-driver (197.45)
From the beginning I thought that it was the computer, but since I have no problem watching anything but FP I believe that it has something to do with it.

Just to add. I don't know if it really is tearing. Maybe the correct word to use is lagging or jittering. I hope you understand what I mean.

Similar Messages

My Macbook is not working properly, I went to a Genius Bar appointment, they were not helpful at all and just told me to go off and reboot my Mac and then restore via TimeMachine. I dont know how to do this. I am extremely displeased with Apple, help me?

My late 2011 Macbook Pro is not working properly it is very slow and extremely painful to use, I went to a Genius Bar appointment, they were not helpful at all and just told me to go off and reboot my Mac and then restore via TimeMachine. I dont know how to do this. I am extremely displeased with Apple at the moment, can someone please help me?

Your problem description is generalized and non-specific. I would make another appointment at the Apple store and insist they help you execute their suggested fixes.
Incidentally, if you search this site, Apple has excellent articles re: restoring a system.
Barry

HT4972 the apps weve downloaded are not working. please help, extremely frustrated with our ipod 4

the apps we have downloaded are not working, please help, extremely frustrated with our ipod 4

See my previous reply for for the apps closing.
For the wifi problem:
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect OK before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT1145 The airport extreme used with my iMac is not seeing my other devices...anybody, please?

The airport extreme used with my iMac is not seeing my iPhone 5, iPad (third generation) or my windows based PC. When I open the airport utility it shows only the internet and my iMac. It does not identify the others. Any thoughts? Thanks

Hi DaileyT,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
When do Apple wireless devices appear in AirPort Utility?
http://support.apple.com/kb/HT3624
Troubleshooting missing devices
If your Apple wireless device doesn't show up in the wireless device list, try the following:
Check to see that the device is turned on.
Check that the device is connected to the network via Ethernet or in wireless range of your computer.
Make sure the device has had adequate time to start up and become discoverable. In the case of Apple wireless devices that are not connected via Ethernet, AirPort Utility scans for new devices once every 15 seconds. From the time a device becomes discoverable (typically around one minute), it could take up to another 15 seconds before the device is displayed in the list.
If you have just configured a new Apple Wireless device, upgraded the firmware, selected "Restore Default Settings..." or have hard reset and configured an Apple wireless device and it does not show up in AirPort Utility after restarting, you may have an incorrect setting. You may want to hard reset the unit and set it up again.
If you are connected to a specific wireless network, all Apple wireless devices which make up that network will appear. However, if you "Restore Default Settings..." from AirPort Utility, or hard reset a device that is out of physical wireless range of the computer, you will need to move the device closer the computer to configure it again.
Best of luck,
Mario

I have tearing with flash and Youtube videos.

First, my specs.
Windows XP
Quad Core
Nvidia 9600gt DDR3
2GB RAM
Browsers: Firefox 3.6.12 and IE7
I have the newest Nvidia Drivers and Adobe Flash 10.1
Well the problem is that I have tearing with flash and videos in Windowed Mode, if I turn the full screen option there is no sign of tearing BUT only if I have hardware acceleration turn on.
So the problem is, why I have tearing in windowed mode?

Same here. I am not getting 'what tearing' is all about. Can u please explain?

I'm trying to decide between the time capsule & airport extreme. With either option, will i not have air play?

I'm trying to decide between the time capsule & airport extreme. With either option, will i not have air play? I have an IMAC, MACBOOK, 2 Apple TVs, 3 iPhones...

AIrplay to digital or analogue devices like speakers or hifi system is only available in Express. Or Apple TV.
The TC or Extreme will pass airplay protocol just fine to your ATV.
The Extreme and TC and now identical apart from the TC having an internal hard disk.

I have an imac g4 purchased Dec 2003 runnung OS 10.5.8. It runs fine with airport off, but when I turn airport on it freezes with the black page, "restart by holding power key . . ." I swapped the airport extreme card with the one in my ibook G4 (purch

i have an imac g4 purchased Dec 2003 runnung OS 10.5.8. It runs fine with airport off, but when I turn airport on it freezes with the black page, "restart by holding power key . . ." I swapped the airport extreme card with the one in my ibook G4 (purchased same date and running same OS). No change in operation.
I am running wifi from verizon. Recently changed from mifi2200 to jetpak 4620 in a 3G location. Ibook running fine, desktop freezes. If I can boot desktop in safe mode and get airport turned off in time. then I can reboot regularly and imac runs flawlessly with no wireless.Have run disk utilities and TechTool Pro rebuild etc, but nothing has worked. How do I fine the culprit?

the power logix thing was really sad. apple changed so much after 10.4.8 that there wasn't a viable way to patch the software.
That statement is precisely why I don't believe in blindly updating the OS, especially in a non-standard machine.
We can't expect third parties to support us forever, and it is shameful to break something that works fine, except that we updated the OS....
I think that any upgrade or modification to a machine or the OS greatly increases the risk of trouble or incompatibility with current configuration and "new" system files.
After all, the component or software could only be tested as far as the current OS version when the component or software was released.
Beyond that, we are all "beta testing".
Following a beta tester protocol, and applying updates to a cloned system drive first, is a prudent way to approach updates, and not only for older, heavily modified machines.
After 10.4.8 and moreso with Leopard, the focus is primarily on Intel architecture, not PPC architecture.
Like it or not, we are all updating to the abyss of the extinction of our machines, unless we can be satisfied with the last stable version of OS that works well with our hardware and software.
I wish they would include the latest pkgs at least with software update.
Yes, having individual packages, rather than lump "OS X 10.x.x" updates would be nice.
This way, one could update as one sees fit. That is to say, for example, fix the Quicktime, but leave my Network alone, etc., etc.
In all fairness, Apple does provide for some breakdown of updates, but I believe there is much room for improvement, especially, as you point out, with regard to the core services portion of the OS.
Until then, I'll leave Software Update disabled.......

Will the airport extreme work with Iphone 4 and Ipod 3 gen without a pc or mac.

will the airport extreme work with Iphone 4 and Ipod 3 gen without a pc or mac.

You can setup an Airport device using the Apple Airport Utility for iPhone
Download it for free in the App Store on your iPhone...
It's under "Utilities" and the "Top Free" utilities.

My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?

My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?

That sounds horrible. There are a number of reasons it could occur.
The first thing to do is ensure you have adequate backups, because what you describe can be a symptom of impending disk failure.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting. There are four separate parts to it; read everything first.
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Read about it here. It contains a link to download EtreCheck. Don't download it from anywhere else (such as may be found by following the results of an Internet search).
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.

My phone doesnt show incoming call and it doesnt ring. Further the iphone4 is extremely slow with opening whats app, camera and photos or while in the program it just closets. Who can advice me what to do??? Otherwise this phone will be changed soon

My phone doest ring with incoming calls, but it also doesnt show someone is calling. I only see it, when i get the txt of missed calls.
Further the phone is extremely slow with opening whats app, emails, photos, camera and it closets the programs while using it.
I have many people around me with iPhone having the same complaints, but nothing has changed yet.
Please Apple solve this quickly otherwise the iPhone i enjoyed so much will be remplaceren with a Samsung

esme43 wrote:
... the phone is extremely slow with opening whats app, emails, photos, camera and it closets the programs while using it.
See this discussion...
https://discussions.apple.com/message/23731048#23731048

Compositing causes screen tearing with Nvidia, is ATI a better choice?

So far, every Nvidia card I've used with Ubuntu, Debian and Arch has had intolerable screen tearing with a compositing manager running, while watching any video. I've installed the proprietary driver from Nvidia on a Debian machine but the screen tearing is still there. The cards I've been using are an 8600GT and a 9600GT.
I've tried xcompmgr, Xfce compositing and Gnome compositing all of which seem to cause the same symptoms.
It seems like I read somewhere that there's a problem with the Nvidia compositing extension or something like that...
Two questions...
1) Do ATI cards tear video with compositing enabled? (I'm hoping they don't...)
2) Is there any way to cure screen tearing with an nvidia card and compositing enabled?
Last edited by captainmurphie (2010-02-22 07:30:57)

ATI Radeon 4670 user here, KDE w/ Arch Linux. While I can't speak for other video cards, this particular card runs absolutely fine using xf86-video-ati and some xorg.conf tweaks. Though I don't play many games, I can tell you Alice runs fine via WINE. As far as OpenGL goes, the screen savers that are supposedly OpenGL work fine, too.
The only performance difference between this card and the 7600GS I was using beforehand that I can tell (minus the speed improvement) is being forced to view videos using the Xvideo driver in KMPlayer. If I view said videos via OpenGL, they display, however widgets on the desktop tend to offer display glitches while the video is ongoing.
I understand there's a good deal of reason for the commenting, and yes, ATI drivers aren't nearly up to par with their Nvidia counterparts, however this doesn't mean some folks aren't having success with the available driver(s) using little effort on their parts. As an ATI user, it'd be nice to see some fellow reports of success with ATI drivers, open source or not.

Extreme heating with safari 5.1

1. any updates to corret the extreme heating with use of safari 5.1? running same webpages on this vs 5.0.8 gets the computer >2x hotter! any way to correct it?

If you have Private Browsing enabled, that's why you aren't staying logged into websites. Same with Google maps.
Private Browsing doesn't "remember" AutoFill information.
Click History in the menu bar then click: Clear History

I have IPod classic that I have been extremely happy with. I now have purchased ipod nano and Iphone. the older version and the new 2.2 are not compatiable. I want to use all my IPods and Iphone,

have IPod classic that I have been extremely happy with. I now have purchased ipod nano and Iphone. the older version and the new 2.2 are not compatiable. I want to use all my IPods and Iphone, but I only have my one computer, how can I update all of my Apple products. I want to use them all.

Hello graingers45,
graingers45 wrote:
have IPod classic that I have been extremely happy with. I now have purchased ipod nano and Iphone. the older version and the new 2.2 are not compatiable. I want to use all my IPods and Iphone, but I only have my one computer, how can I update all of my Apple products. I want to use them all.
What do you mean it isn't' compatible? What isn't compatible?
There is no limit to the number of iPods you can sync to one computer, iTunes library, or iTunes account. Simply connect each separate iPod/iPhone to your computer and configure each to sync whatever content you wish to.
B-rock

Can't join the airport extreme network with my iphone~~please help

Can't join the airport extreme network with my iphone

What radio mode do you have the 802.11n AirPort Extreme Base Station (AEBSn) configured for? (ref: AirPort Utility > Select the AEBSn > Manual Setup > AirPort > Wireless > Radio Mode = ?)

Dreamweaver has been running extremely slow with reflow.css.

Dreamweaver has been running extremely slow with reflow.css. Wondering if anyone else is encountering this issue? If so, any fixes or known variable that causes this to happen?

I haven't see this. Can you describe a little more about what you are doing and what parts are slow? If there are specifc steps you can also file a bug with the Dreamweaver team:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=12

Extreme tearing with FP 10.1

Similar Messages

Maybe you are looking for