Extreme Win 7 Problems

I have been having a host of problems with getting Windows to run on my Machine. I have tried Win 8, Win 8.1 and Win 7. I am seeing hangs on log off, white blank icons (fixable but occurs regular), extremely long installs of programs and even
delays between icon clicks until program GUI is visible of up to a minute.
I have all updated drivers, what Windows Updates will install (Win update hangs too) and I am running on an AMD Bulldozer 8 Core with 32 GB Ram, 2X Nvidia GTX 570, Dual SSD Drives, etc. The Machine used to be stable for over a year even through Windows
8 Beta etc.
I think I have active hackers hacking my home network and I have captured a strange LAN Ethernet Log on my Router called Sacred Morals. Today I found this and I am looking for a professional opinion (credentials would be great in case I need to go
to law enforcement with the information).
Here is a screen grab of my Windows Credentials I noticed today: The VirtualApp/didlogical entry seems strange to me.
Also, this was logged on my ATT Modem / Router. Is their anyway to spoof a router log to say Ethernet lan from offsite? It makes me feel that they were in my home to do this? Any feedback is much appreciated.

Hi,
According to my experience, I thought it could't be achieved to spoof a router log to say Ethernet Lan from offsite.
Roger Lu
TechNet Community Support

Similar Messages

TS1459 Win 7 , itunes store will not accept Apple ID, on the diagnostic program says secure link failed spoke to tec.dept they say Win security problem ,, turned all off problem still the same any ideas please

TRYING TO AUTHORIZE MY COMPUTER>>>>>>>on the diagnostic program says secure link failed spoke to tec.dept they say it's a Win security problem ,, turned all off problem still the same any ideas please Ipad ,
(((Strange thing is Apple want me to purchase assistance to enable me to buy from thier store)))

You should send this to Apple.

AirPort Extreme HD causing problems

I've finally got my hard disk (Maxtor OneTouch 250GB) working with my AirPort Extreme.
The problem is that I have folders with upto 80GB of files in them, which just dont open when I click on them. I'd rather not format the disk because I have way too much required data on it.
Is there any way of making the disk work perfectly without having to wait for 10 mintues for a folder to open (which may/may not open and causes the HD to be disconnected)?

Actually although my hard disk is connected via AirPort Extreme, my iMac is connected to the network on Ethernet. So my iMac isn't using the wireless at all to connect to the hard disk.
My hard disk has stopped going offline randomly, but it doesn't make a difference anymore because I can't even open any of the folders on the hard disk.
I was told that if I formatted the hard disk and created smaller folders then the computers on the network would be able to access files faster.
I'm trying not to format my hard disk, so if anyone has an alternative solution that solves this then I would really appreciate it. Thanks.

Wine : sound problem

i installed the game sof2 by wine.
the problem is that the sound in the game is bad
do u have solution?
thnak u

You can check winecfg -> Graphics to see if Direct3D Vertex Shader Support is set to hardware. If it isn't, switch it. Otherwise it's probably just a bug with emulating that game.
Here's the linux gamer's howto on the game; but it looks like they didn't have much trouble with it so it probably won't be much help.
Also if you don't mind, please don't post the same thread in multiple topics. Thanks.
Last edited by jb (2007-02-21 02:33:09)

Airport Extreme - Win 7 - USB internet dongle...

Using my Apple Airport Extreme, I would like to connect (possibly through a CAT5 cable) to my Win 7 laptop (of which uses an USB dongle for the internet) and stream an internet connection to my iphone 4s to save on some data costs. Is this possible?

Is there a conflict between the Belkin
adapter and the Extreme?
We are using two PCs, one laptop running Windows 2000 and one desktop running XP, and both have Belkin "g" equipment installed. We are having no problem with the desktop. Sometimes we need to remove and re-insert the card on the laptop upon startup when it does not connect. Other than that, they both run great with the new AEBS.
The XP machine is using Windows to manage the wireless connection, but the laptop is using the supplied Belkin control panel.
G4's, G3's, etc. Mac OS X (10.4.8)

My Atv2 is very slow movies and shows take forever to load it plays for a few minutes then pauses again. I thought if was a problem with my wireless router but I replaced it with a new airport extreme and the problem persists. Air play is just as slow.

My Atv2 is very slow with both AirPlay and rented and purchased content I spoke to apple rep and tried the things he suggested but the problem persists. Now it requires more lead time then the lenght of material being viewed. I haves broadband internet connection and airport extreme router so I don't think this should be a problem. Lately every time the unit goes to the screen saver an error message come up saying there was an error while loading content please try again later and you have to all over again. It is extremely frustrating. Any suggestions? What speed of transfer should I expect using AirPlay ?

I'm having the same issue. Ay fixes? Bought ATV today, music streams but videos don't and mirroring doesn't work either. Start mirror and severe lag then just drops. Been trying for couple hours. About ready to return it.

Airport extreme/hard drive problems

Any advice appreciated...
Our airport extreme only intermittently recognizes our Lace hard drive and it's driving us crazy. We bought macbook, the airport, and hard drive at the same time (yes we abandoned the PC world) and had a friend hook it up. For two months everything worked fine and we even hooked our printer to the airport and printed wirelessly.
Then for no particular reason, the harddrive disappeared and we can no longer access it wirelessly. We can, however, plug the harddrive USB into the Macbook and we can use the harddrive perfectly. Also, interesting, if we open airport utility and click on "disks", the harddrive is there, but it doesn't show up on the desktop or Finder and we can't access it.
I've called Apple tech support numerous times (We bought the extra service, but sadly that didn't keep us from having to spend an extremely obnoxious time on hold. We thought Apples were supposed to easy. but that's another story..). So far, we did get the airport and Macbook to recognize the hard drive by simultaneously renaming the harddrive and unplugging the hard drive and Airport. That worked for exactly 18 hours. Then the harddrive disappeared again. I called tech support twice but after 45 minutes on hold each time, I lost my patience. (They make us hold for the first step, then hold again for the product specialists. Gee we sure are glad we spent extra for the extended service!)
Other interesting tidbits: We've never had a problem with wireless internet service and have always been able to wireless send jobs to the printer.
Any ideas?
Signed and thank you,
Not so sure switching to Apple was a good move.

This is the most acceptable solution I have come up with:
Either go to the DHCP tab under internet settings on the router and "reserve" IP numbers for any hardware that interacts with the drive or manually set IP numbers in your network instead of using DHCP. The problem occurs when an IP number to any computer connected to the drive changes unexpectedly. This would be whenever the DHCP lease renews if your computer is asleep when this happens. I have not had a single drive issue since I set this up.
If you need to access your drive from a remote location where you don't have control over how the network there operates, then avoid letting your computer sleep while it is connected to the drive.
I chose to manually assign an IP number to my desktop and also to remote base stations, however this is not so convenient for my laptop because it then wants to use the manual settings everywhere unless I set up another "location" which has to be manually changed. This is where reserving IP numbers under the DHCP tab was really useful. The laptops on my network are still getting their numbers from the DHCP server but the server knows to give each one the same number based on their MAC addresses.
If you take a look at the default settings for DHCP, you will notice that not all the available numbers are being assigned through the DHCP server. You can use numbers outside this range (other than x.x.x.255) for your manually assigned IP numbers and still have DHCP running for when guests come over to use your network.
Message was edited by: Tom Alperin

Win XP : problems for itune to connect the airport remote speakers

Hi there,
My config is iTunes installed on my PC, a Tecom wifi router and two airport express base stations connected to speakers in different rooms of my flat.
At first, iTunes has no problem for seeing the airport stations and the music goes well through the wifi.
After two or three days, the PC doesn't see the stations anymore in iTunes (they actually still show, but in gray) .
If I want them to be seen again, I need to close iTunes, go to "connexions", disconnect my PC from the network, connect again, run iTunes again, and then... it works !
That's a bit boring. As strange as it could be, the act of shuting down my PC every night and running it "fresh" every morning doesn't help.
Has any one any suggestion on how it could work better ?

Hello Deb Parks. Welcome to the Apple Discussions!
I'm not sure if, by product key, you mean the encryption password for your 802.11n AirPort Extreme Base Station's (AEBSn) wireless network. Is your AEBSn's wireless network currently running encryption (WEP or WPA)? If so, temporarily disable it, and then, see if the PC can connect.

Dual Boot Win 7 & win 10 Problems?

I am dual booting this, (Win 10 on my 2TB HDD and Win 7 on my SSD.) and now when i try to boot back to Win 7 my mouse switches off. The thing works fine in 10, and had been workign for years on 7... Anyone else seen a problem like this?
I have tried reinstalling the mouse drivers and it isnt helping on Win 7. Unplugging and pluggung in, the mouse lights up for a split second, but then dies again. switch back to Win 10 and it works as usual. No problem at all...

Hi RobGamez,
Are you using USB mouse?
If so, how about another USB port?
If this is a USB mouse, I suggest you uninstall the USB controller in Windows 7 system and restart to check if you can get it work.
1.Open Device Manager.
2.Expand Universal Serial Bus controllers.
3.Right-click every device under the Universal Serial Bus controllers node, and then click Uninstall to remove them one at a time.
4.Restart the computer, and then reinstall the USB controllers.
Alex Zhao
TechNet Community Support

IQ524 Upgrade to win 7 problems

Still unresolved problems with win7 upgrade and after 5 weeks of attempting to get through on the help line showing on the instructions still no results. Now when you call the help line it says it is a private number. What is that all about. This stinks. This win 7 upgrade program is a bust. Also note that alot of vendors still do not support win 7 with updated drivers for devices including the newer HP office network printers. Beware of the upgrade windows beast.
I guess my last post was dropped for the message board for some reason.
Message Edited by jimbjr on 11-21-2009 02:44 PM

Hot off the press. The 1-888-447-0150 is supposeldy not a good number that was printer on the win 7 upgrade package instruction sheet. I used another number from off the HP.com web site. They could not offer a solution either and will get back with me when they may have an answer to the problem by e-mail. Okay.

[Win/CS3] Problem with tree view nodes display In Release Version of InDesign

b [Win/CS3]
Hi All,
I am Facing a problem from last few days.I have a dialog on which i have a treeview ListBox.I am filling this listBox dynamically.On a Button click Event.
My requirement is to show Some text value on the node and Index value on the back end.So When i select String1 the index1 should be Selected.
b This Listbox is working fine ON Debug Version. But Crashing On Release Version.That seems Strange to me..........?????????
b in DialogObserver::Update on button click event
NodeID node = IDCGridNodeID::Create(IndexX);
treeMgr->NodeAdded(node);
b and in TreeviewMgr::ApplyDataToWidget
TreeNodePtr<IDCGridNodeID> nodeID(node);
PMString IndexNo= nodeID->GetName();
I am going to database and retrieving string value according to that
IndexNo.
WCHAR Buf[200];// this contains value retrieve from database
Then i am converting WCHAR[] to CHAR[] BY using
size_t origsize = wcslen(Buf) + 1 ;
const size_t newsize = 100;
size_t convertedChars = 0;
char nstring[newsize];
wcstombs_s (&convertedChars, nstring, origsize, buf, _TRUNCATE);
PMString StringToDisplay(nstring);
//Till here its working fine
But when i am setting this value as Node name
style.Translate();
setNodeName( widgetList, StringToDisplay, kIDCTVTextWidgetID );
and function return kTrue; statement executed The application is crashing.
With error showing
b INdesign Encountered a problem Needs to close.
I Am not able to find out why this is not working on Release while it is working fine on debug version..???????????????????
Is I am missing or Made some changes For release version..????
Thanks,

Hi Michael,
Thanks for your reply.
The lines
NodeID node = IDCGridNodeID::Create(IndexX);
treeMgr->NodeAdded(node);
are working fine for Both Debug N Release version.The Application Is crashing In tree view manager class as i explained.
while it works fine without having even a single warning in debug version.
I read the document and i find out if i want to add node in treeview i have to call
treeMgr->NodeAdded(node);
which will call manager
b and in TreeviewMgr::ApplyDataToWidget
i am getting my node name as
TreeNodePtr<IDCGridNodeID> nodeID(node);
PMString IndexNo= nodeID->GetName();
I don't think that something is wrong in this but i am not sure becoz i am new in indesign development.
for adding nodes i referred the SDK examples.I found the same code for adding.

WINE audio problem

I recently migrated from ubuntu to arch (with Gnome as desktop environment), and I had a problem with wine. I run an application called dolby axon under wine which is basically a voice chat application and I have skype. The problem is that wine access the devices through ALSA and skype through pulseaudio. So if I run dolby axon under wine and then skype, skype has no audio, if I exit dolby axon skype gets the audio immediately and the same vice versa. I did not have this problem in ubuntu so I believe that there is a solution for this that I am not aware of since I am new to arch.
My conclusion for the problem is that for some reason wine locks the audio devices used through ALSA so pulseaudio is unable to use it.
** EDIT **
The problem was fixed by installing lib32-alsa-plugins
Last edited by hmedhat (2015-03-30 22:57:04)

an update on the issue, it is not only skype, any sound the system use "like playing music on chrome" is not working as long as wine is operating. and when I close wine everything works fine

Airport Extreme + airport express - problem outputting to multiple speakers

Hello,
I have set up my airport express by joining my existing Airport Extreme base station wireless network. When I play my music in iTunes, I am able to select either the Computer or Airtunes for the output in the drop down box in the lower right of iTunes. When I select Airtunes, the music streams no problem to my remote speakers connected to Airport Express. However, when I try to select Multiple Speakers in the drop down menu in iTunes, a pop up Remote Speakers box opens - when I select both the Computer and Airtunes in this box, I get an error message - "An errror occurred while connecting to the remote speaker "Airtunes". An unknown error occurred (-3256)." Since the error occurs only when I try to selct both the computer internal speakers and the remote speakers, but I am able to connect to the remote speakers by themselves, I am really confused. Any thoughts?
Charly

Just to clarify, the goal is to play iTunes on both the computer's internal speakers and my remote speakers at the same time.
Charly

Crazy Guild Wars/WINE/Graphics Problem

Recently I've gotten back into Guild Wars (and subsequently dropped off the forums like a stone), but I have a very bizarre issue with it. Every so often, and I have no idea why because error reports haven't turned up anything, I get a graphics failure, the monitor turns off as if it isn't receiving a signal or one of the sync rates is too high, and a fan in my computer, presumably on the graphics card, becomes audibly louder and faster. This only happens with Guild Wars on WINE, nothing else will cause it to occur. Also, it doesn't happen at precise intervals or after a certain number of hours, it seems to be completely random. I've had it happen on load, 5 minutes in, a few hours in, and on a day off where I was just being lazy, I had ten straight hours of gameplay and no problems whatsoever. I've gone over all of my logs, and absolutely nothing is turning up to clue me into the problem.
My computer is quite new, I purchased it this April. It has an Nvidia 9600GT graphics card, the drivers for which have been out of beta for a while now and have acted quite well with everything else, including Quake 4, ET:QW, Prey on WINE, and Mount&Blade on WINE. Previously I was using the Nvidia installer to handle the driver, but both it and the Arch package have the same problem, in case there was any doubt there.
Any help is very much appreciated, and while the problem may not best be suited to these forums, even getting the slightest hint as to what could be going on would be great help, as I'm completely in the dark on this one.

Launching the game with WINEDEBUG=+all wine Gw.exe causes so much debugging information to pass that it slows the entire process to a crawl. It took two full minutes to even display the GW "connecting to ArenaNet" window to appear, much less connect and complete, something which usually takes 1-3 seconds max. It would be impossible to test the game itself properly, if at all, with that option set.
I can also confirm now that using the xorg.conf fix won't solve the problem, as 10 minutes in I had another blackout. That fix seems to be for a much older 5200 card on a CRT though, the solution for which is not going to mesh as well with a 9600 running a 22" LCD.
It could also be an issue with the monitor now that I think of it, which is an LG 226WTY @1680x1050, but I have my doubts that it lies at the bottom of all this, as I've heard MPD stop playing when I've had it on and this problem has occured, so I think it has something to do with the system itself, be it kernel or internal hardware, more than the monitor.
Thanks for the ideas though, too bad they didn't solve the issue.
P.S. The more I think about it this might very well be a kernel+WINE issue, as I'm also unable to ctrl+alt+backspace out of X to the command line when the blackout occurs, which could mean the keyboard is being disabled by a kernel panic of some kind, thus causing the problem with the graphics card. Nothing has appeared in the logs though, which is odd.

Win 8 problem

I have not beern able to authorize my laptop since I put Win 8 on it in February 2012.,

You are not the only one with this problem. We have 2 X1 Carbons that were upgraded from Win 7 to Win 8 on delivery. Result is 1 has working H5321 and the other has the same symptoms as you. Lenovo support have changed the module, and then changed the complete motherboard to try and fix the problem. Neither fixed it, so they said that as the X1 Carbon was factory shipped with Win7, then the supported solution is to return it to Win7.
Not a good outcome as a supplied Win8 ready PC, upgraded using the Lenovo Win8 upgrade programme.
Lenovo have a problem - acknowledge it and fix it!

Extreme Win 7 Problems

Similar Messages

Maybe you are looking for