Extreme with LaCie 500 GB Silverscreen
Anyone have comments on this? I´m thinking of getting a Silverscreen for my movies. I love the apple-tv for music and pictures, but hate it for lack of storage and that it doesn´t play a hole lot of formats.
Here in Norway there is no movie-rental either... So, get a Silverscreen for my movies, and keep using apple-tv with my itunes.
Any better ideas? (part from moving to another country...
Will the Silverscreen work with my Airport Extreme? (can´t see why not, but..)
Thanks
I´m also getting a time capsule, but have I understood correct: the Silverscreen is NOT wireless?
Similar Messages
-
Extreme with LaCie ED Mini Issues
I have a LaCie Ethernet Drive connected to my new AirPort Extreme. I have to MBP's and an HP Tablet connected to the network. No issues with the HP Tablet recognizing the ED Mini. The MBP's with connect to the ED Mini, but won't recognize any files. I've tried restarting, reinstalling, and nothing is working. This has to be a MBP issue because the HP Tablet has no problem accessing the ED Mini. Any thoughts?
Right see that myself now, strange. You need to connect the drive to your mac and use disk utility.
-
The genius bar sold me a LaCie 500 GB EHD today but I can't get it to work properly. Can I schedule another genius bar appt. to help me with this issue even though the EHD is not an Apple product?
Yes, if you purchased it in an Apple store, they should be able to assist you. Bring your MBP with you as well as the Drive.
Ciao. -
Restricting Time Machine size with LaCie NAS Share
I have a question regarding quotas for my LaCie 2big NAS. I am using Time Machine on my MAC OSX. I had no issues in the Time Machine setup and initial backup so far. I wanted to limit the amount of disk used by Time Machine. I created a separate Share for Backup on the NAS. However, I am not able to set a quota based on the Share. I can only set the quota based on the user. I tried to create a user named "backup" which had a quota but the Time Machine sparse bundle has my own username (i.e., "my_username") as the file owner (it seemed like I needed to have the backup and my_username for the NAS with permissions on the Backup share). Time Machine identifies the disk as "Backup - My_NAS_Name" with the 500 GB limit which I established. This seems like it is working but I am not sure about the best approach.
Why doesn't the 2big NAS support Share quotas? It seems to be supported on other LaCie products. Is this the best way to configure or use the NAS to restrict the TIme Machine available size?Brian Smale wrote:
Thanks, Pondini, you make a good point about using a USB drive with my Airport Extreme. The snag is, the Airport Extreme is in the same room as my computer, so it doesn't get over the co-location/fire problem. I suppose I could plug the Airport Extreme into my ethernet in another room, but this might compromise its coverage.
To protect yourself against fire, flood, theft, and direct lightning strike on your power lines, you need secondary, off-site backups. Get a portable external drive (or a pair, to alternate). Periodically do separate backups to it, and take it to your safe deposit box, workplace, relative's house, etc. CarbonCopyCloner (which I use in addition to TM), SuperDuper!, or the like would be fine for this, although you could use TM by just doing a +Change Disk+ each time.
Frankly, looking back 20 pages through this thread, I am astonished by the number of problems that people seem to be having with Time Machine. It rather looks like a flakey piece of software that's best avoided.
Don't be misled by what you see here. TM works just fine for most people. They only post here when there's a question or problem. Many of the questions wouldn't be necessary if Apple's documentation was better, and most of the problems are either things people did without knowing they shouldn't, or hardware problems. You'll find similar threads on the CCC and SD forums, too. -
Airport Extreme with Gigabit Ethernet - Does it have jumbo frame support?
Please, can I get definite answer to this question? I do not need speculations as I read some reviews already. Can we have Apple finally put complete specification of the product rather than "popular one" with attachement of protocol numbers?
I just need simple answer possibly from Apple engineering team to the following questions:
1. Does current Airport Extreme have support for jumbo frames (everything above 1500bytes per frame)? (if one does not know what that is them perhaps understanding acronym "MTU" can help a bit)
2. If there is support then what is the maximum supported size of jumbo frame? (Some products do not go above 6k and I read some statistics that traffic somwhere is usually 66% at about 4k jumbo frames and above that there is not much...)
3. If there is no support then does Apple plan on update for this (firmware or hardware) in the future?
Please, do not tell me that someoene ran something with jumbo frame and it worked as I tried yesterday LaCie Ethernet drive with supposedly setup (I set it myself) of jumbo frame 4k and on soft reboot of the drive it worked when connected to Airp[ort Extreme, but after hard reboot the disk is not visible anymore. I will recover the disk, but I need to understand if I have chance of using jumbo frames that tremendously improve performance with large files (e.g. try movies stored for AppleTV on network drive) when using Airport Extreme with its gigabit Ethernet... or that is just Gigabit Ethernet for product marketing purposes only.
I just need reliable answer by product specification that should be on paper at Apple, but it is not so I hope that one of guys here has access to some engineering team.
Thank you,
Maciek SamselThe spec. on the chip used by Apple support your conclusion.
BCM5395 Features
Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab standards
5 10/100/1000Mbps Auto-Sense RJ45 ports supporting Auto-MDI/MDIX
All ports Support Full/Half Duplex transfer mode for 10/100Mbps and Full Duplex transfer mode for 1000Mbps
Port-based and MAC-based VLAN
IEEE 802.1Q-based VLAN with 4K entries
Port-based rate control
Port mirroring
Compact field processor (CFP)
512 rules
Filtering, classifications, remarking, and priority actions.
Priority modification on egress
DOS Attack Prevention
Loop detection for unmanaged configurations with Broadcom’s patented LoopDTech™ technology
CableChecker™ with unmanaged mode support
Double tagging
IEEE 802.3x programmable per-port flow control and back pressure, with IEEE 802.1x support for secure user authentication
4K entry MAC address table with automatic learning and aging
128-KB packet buffer
128 multicast group support
Jumbo Frame support up to 9728 byte -
Problem with LaCie external HD
Have been using a LaCie 500 GB external HD hooked up to my iMac (OS X 10.8.2) via USB port for the past 4 months. Use it with Time Machine.
Lately it has been disconnecting by itself ... and just a few days ago the backups started to fail too. Using disk utility to check the LaCie says it needs to be repaired ... then says it can't be repaired, needs to be reformatted.
Tried changing it to another USB port (without doing anything else ot it) and now disk utility says it is ok and backups are working again.
Is this a problem with the USB port or with the external HD? Any suggestions?Thanks maurits ... I'll play around with it and try to figure it out.
-
AirPort Extreme with USB hard drive
Hi...I have an AirPort Extreme with a Maxtor OneTouch 250MB hard drive attached (via USB port). I have two computers which access the internet and the hard drive through the AirPort.
The first computer is a 1.8 GHz PowerPC G5 (with 3GB of SDRAM). The second is a 2 GHz Intel Core2 Duo IMac (with 4GB of SDRAM).
Both computers have full signal strength via AirPort and both computers have no connection/speed issues with the internet. It's when trying to copy to/from the USB disk that there are problems. The older Mac, the G5, has no problems at all. Great copy speeds in both directions, I can even work off of files on the USB disk without a problem.
The iMac, though, has a problem writing to/from the external hard disk. It connects without a problem, but after that, things come to a standstill.
For example, I can copy a 25MB file from the AirDisk to the G5 in about 15 seconds. If I try to copy the same file to the iMac, it takes as long as 5 minutes. I've tried every setting I can in AirPort Utility, including trying each of the channels individually, and nothing helps. I've disconnected the G5 from the network and that didn't make a difference, either.
Other info...the AirPort firmware is updated to version 7.3.2 and both Macs are updated to System 10.5.4.
If anybody has any advice, I will be eternally grateful.I have a very similar problem. I have a 2.8 GHz iMac with 2GB RAM and am using OS X v10.5.4, and an Airport Extreme (v7.3.2), both updated to latest firmware. I have a 500 GB TrekStor external HD connected to the AEBS via USB. The TrekStor HD was pre-formatted in FAT32 and is visible on my iMac's desktop and in Finder but I cannot transfer files to it or see files on it. When I drag and drop a file on the TrekStor, it sometimes seems to go well but then the file is not visible via Finder, and sometimes I get an "insufficient privileges" message. I repair permissions on the iMac's internal HD without any change. I am logged in as the admin. All assistance is much appreciated!
-
How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?
How do I add an Airport Extreme with Time Capsule to an existing non-Apple network? I have an ISP provided wireless Router that has to remain as the base station. I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.
One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.
-
Setting up airport extremes with mobile netbook cart
I work in a school environment, running windows. We have four mobile carts in the high school. We have an airport extreme for each of the carts. In our situation, the airport extremes are mobile. They do not stay in one location all the time. The teachers connect the airports to a wired connection in their classrooms. We have the netbooks set up to automatically connect to an airport when in range. I have each of the airports setup the same way; create a wireless network, each has it's own network name, radio mode is automatic, channel selection is automatic. Internet options are connect using ethernet, connection sharing is off (bridge mode) and tcp/ip is static. There are a couple of issues we seem to be having. One is that the airport with the stronger signal is not always the one the netbook connects to. I could have one classroom of netbooks connecting to an airport that is located two classrooms down the hall when there is airport in the classroom that has a stronger signal. What could be causing this? We push out settings to the netbooks via group policy, such as redirected desktop and network shares. When a user logs in they don't seem to get the whole policy all of the time. If you restart or logoff then login, the netbook gets the policy correctly. Could this be a problem when multiple airports are in range of the netbook trying to access the network? Is having the airports mobile, moving from one room to the next, a bad idea? Thanks for the help.
tried this but it didnt work that well, the distance between the main airport and the extenders is too long. Also, when choosing extending, it came bugging me with incorrect dhcp settings. Couldn't solve that.
So i configured allt he extremes with creating a wireless network, same ssid and same wpa settings. Als bridgedsetting is disabled.
That seems to work. Anyone with an opinion about this configuration? -
I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. Suddenly, the "timeout" is not allowing me to connect to my wireless network.
It could be that there's a new source of interference.
Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees:
http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
By the way, you've been misled by the poor field labeling into trying to type your entire message into the subject field, instead of putting a one-line topic description there. -
Bought Airport Extreme with Time Capsule version 7.7.2 with 2 Terabytes Feb 2014. It was probably an expensive mistake, but after searching for weeks for a external hard drive, it seemed reasonably priced to just use the capsule as my external hard drive for the price I paid. Spend an hour with Apple Care to get it working-had to use ethernet cord to my iMac OS 10.8.5 processor 2.5 GHz Intel Core i5. I did not "need" the airport as we have a Winstream SAGEMCOM modem/router (Sagemfast 1704) But, I was desperate and about to lose my old external hard drive with literally had 3 computers worth of information on it. It had already "died" once, but got it back, so once I got the airport/capsule and was told I just paid for an expensive HD, I had no time to take it back to get something else-I had to transfer my info right then. We (Apple Care) could not get it to work as a HD wirelessly. It may be because it was being set up for the first time; I don't know. I was hoping I would get a transcript of all done so I could do it myself if needed later on, but when I looked at my email-they didn't do that. (Don't know if that is normal, I was used to other "techs" sending the email.) So now I really want to try to move my airport and "extend" our wifi as it said on the "box" that you could do...
Our Windstream router had to be placed in the lower level at the bottom of our stairs. The stairway is "open" (no door going down the steps). I want to place the Extreme at the top of the stairs so that we can use some things in our offices or not have Netflix on our TV lose connectivity when we all are on our computers.
I know I need an ethernet cord to connect directly with the modem/router to the Airport Extreme. I don't know what I will need to do after I connect it as it was so goofy when we set it up the first time (With the app it would disappear and not show up..) But my biggest concern is will I be able to still use the capsule as my hard drive and will I be able to do it wirelessly? (Even with it connected by ethernet, every day I have to re-connect to it before I can click on anything on the hard drive. It never shows up on it's own as my old HD did. That drives me nuts.) I do back up using the Time Capsule feature as well. I appreciate any help.I am still willing to plug in the ethernet cord to the modem/router and try it IF I was able to get a step by step instructions..
Connecting the Time Capsule (TC) to the existing Winstream by Ethernet would be the basis for a roaming type network. This type of network allows you to basically "roam" with a wireless client and connect to either router. This, in essence, would provide you with an "extended" wireless network. The Apple routers can work with just about any manufacturers' routers in this fashion.
The keys to having a successful roaming network are as follows:
The routers must be interconnected by Ethernet.
Both routers will broadcast their own Wi-Fi network, but MUST use the same Network Name (or SSID), wireless security type (WPA or WPA2), and wireless password.
The TC MUST be reconfigured as a bridge.
Connect a single Ethernet cable between one of the Winstream's LAN ports and the WAN (circle of dots) port on the TC.
The basic steps are:
Power-down the Winstream.
Perform a "factory default" reset on the TC. Leave the TC powered-down after the reset has completed.
Connect the TC to the Winstream using an Ethernet cable.
Power-up the Winstream. Wait at least 10-15 minutes to allow it to initialize.
Power-up the TC. Wait at least 5 minutes to allow it to initialize. (Note: Since we just reset the TC it will be performing as a wireless router that will be broadcasting an unsecured Wi-Fi network with a Network Name of something like: Apple Network NNNNNN)
Connect your computer to the Winstream's Wi-Fi network.
Run the AirPort Utility. select the TC, and then, select Edit.
Go to the Network tab.
Change the Router Mode option to: Off (Bridge Mode)
Select the Wireless tab.
Verify that the Network Mode option is set to: Create a wireless network
For Wireless Network Name, enter the Wi-Fi network name used by the Winstream.
For Wireless Security, select the equivalent security type that is used by the Winstream. (Note: Use "WPA/WPA2 Personal" if the Winstream is using WPA/TKIP. Use "WPA2 Personal" is the Winstream is using WPA2/AES.
For Wireless Password, enter the same password used by the Winstream.
Select Update and allow the TC to restart.
As far as your external HD, yes you should still be able to use it as before. -
How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO. -
I can not join my Apple extreme with the Apple express. I shows a conflict in the network! I've tried everything. How can they join on the same network?
It says that my DHCP has to be changed! How? to what?
It is 802.11g.express. but is set to default by the computer (Macbook Air).
The other is 802.11n. (express)
Extreme is 802.11.g. Is the Main Airport.
It is on ethernet & wep 128 security. -
i am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??
You do not need the Setup Assistant; in fact, you do not need any software on an external hard drive. I have two LaCie's; I erased the drive as soon as I plugged it in. You will need to format it anyway because most hard drives come Windows formatted. So, if you only want to use it with the Mac, highlight it in Disk Utility and choose Mac OS Extended (Journaled) as the format and the GUID Partition scheme under Options. While doing that, it will erase the drive (and get rid of the LaCie software) - once finished, your drive is ready to use for Time Machine or any other backup plans you have for it.
-
AirPort Extreme with 3T time capsule file security question
Right now I am using a MacMini with an external HD as a file server. I'm thinking g of using the new AirPort Extreme with 3T time capsule to do the same tho g (while also extended my wifi reach).
With the Mac mini I have fine control over who gets to see and do what to which folders and files. It seems that with the AirPort Extreme thee is no notion of permissions or access control -- if you can get on the wireless you can access the files. That is extremely insecure.
Is my understanding correct? Is there no way to secure files hosted on an AirPort Extreme so only certain users can access them??
- johnAre there any instructions for how to format and set HFS+ user permissions on the AP Extreme's HDD?
For the formatting part, you will need to temporarily connect the drive to your Mac, and then, use the Disk Utility (a part of the OS X operating system) to partition and format the drive. You should find this utility in the \Applications\Utilities folder. For HFS+, choose "Mac OS Extended (Journaled)" for the Format option.
For assigning user permissions using accounts, you will need to use the AirPort Utility.
Run the AirPort Utility
Select the Extreme, and then, click on Edit.
Select the Disks tab.
Select the HDD in the Partitions window.
Choose "With accounts" as the Secure Shared Disks option.
Click on the "+" button to add user accounts.
For each account desired, enter the Account Name, Password, and File Sharing Access type.
Click Save.
Click Update to write the new configuration information to the base station and wait for the station to restart.
Maybe you are looking for
-
Help please to Upload a file from my PC to server's KM
Hello: I can't Upload correctly a file from my local PC to a KM of the server. My problem is after that I've uploaded any file from my PC to KM, sometimes when I open or download it from the KM appears blank, and when I try another way to write the f
-
When I read a pdf document using Safari on my IPad I'm unable to read more than one page of a file. A padlock icon is locked on the tab. Please help.
-
Arabic characters issue in smtp email csv attachment
Hi all, the below email extracts the output of a query and sends it as an attachment in csv format. but the arabic characters are coming as question marks in the attachment, can someone kindly help, below is hte code procedure test is smtp
-
Hi, I have noticed that fonts in my web browsers are bolder then they should be (comparing to my friend's computer with the same OS X but different monitor). I have launched System Preferences, but everything seems OK - anti-aliasting is ON and turn
-
I want to create a website where half of the homepage has a slideshow of photographs running, but I can't find a simple tutorial that doesn't require code. Any ideas? Obviously, I'm incredibly new to Flash Catalyst.