Extremely High Sound Qual

[size="2" color="#333333">Creative Sound Blaster[size="2" color="#333333">Recording on?Mon Nov 3 2006 [color="#333333">?[color="#333333">?[color="#333333">?[color="#333333">24-Bit 96-Khz 9042Kb Demo...[color="#ff3300">Support Windows Media player[size="2" color="#333333">[color="#ff3300">...
http://www.cankoray.com/dsd-demo.zip[color="#333333">[color="#333333">?[color="#333333">(Demo request)<span class="gensmall">

@ the-edmeister
many thanks for the reply.
After reading your post I did upgrade to Firefox 4 Beta 9 and the memory usage gone down substantially but it's still around 200 MB to 370 MBs... even with just one tab opened.
Though much better than 1656 MB :)

Similar Messages

  • XFi Extreme Audio Sound C

    hi ,?I have XFi extreme audio sound card. the problem i am facing is that very high usage of CPU from the day when i installed it. please help me what can i do in this case.

    Can anyone out there please help me? This issue is driving me crazy. I love vista and windows 7 so i don't want to switch back to XP although the XFI card works perfectly on it [email protected]

  • Extremely high memory usage on ideapad u310

    Hi all,
    I've got a problem with my ideapad u310 touch running windows 8.1. When doing completely nothing (just staring at the desktop with no programs running) my laptop uses ~55% of ram. I find this extremely high, when i open a few chrome tabs and listen to some music, maybe open a powerpoint it even rises to 80+%. My Medion erazer laptop(also running 8.1) with 4GB ram uses ~65% with the same usage and ~35% while doing nothing. I deleted almost every lenovo programm except energy management and OneKey recovery and i disabled as much programs as possible on startup but there's almost no difference.
    Now, I don't really care about the high percentages but what I do care about is that it gets extremely slow when 80% of the ram is in use. Does anybody know what i can do about this? I already tried the refresh windows option but that didn't help. Or am I just stuck with a device that has very very very poor multitasking performance.

    hi spromper,
    Welcome to Lenovo Community Forums!
    Opening Task Manager will show you which application utilizes the RAM.
    Also Doing a clean boot will help on freeing up RAM
    http://support.microsoft.com/kb/929135
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Extremely high memory usage after upgrading to Firefox 12

    After I upgraded to Firefox 12, I began frequently experiencing Firefox memory usage ballooning extremely high (2-3GB after a few minutes of light browsing). Sometimes it will drop back down to a more reasonable level (a few hundred MB), sometimes it hangs (presumably while trying to garbage collect everything), and sometimes it crashes. Usually the crashing thread cannot be determined, but when it can be, it is in the garbage collection code ( [https://crash-stats.mozilla.com/report/list?signature=js%3A%3Agc%3A%3AMarkChildren%28JSTracer*%2C+js%3A%3Atypes%3A%3ATypeObject*%29] ).
    I was able to capture an about:memory report when Firefox had gotten to about 1.5 GB and have attached an image.
    A couple of things I've tried. I have lots of tabs open (though the Don't load tabs until selected option is enabled), so I copied my profile, kept all my extensions enabled, but closed all my tabs. I then left a page open to http://news.google.com/ and it ran fine for several days, whereas my original profile crashes multiple times a day.
    I also tried disabling most of my extensions, leaving the following extensions that I refuse to browse without:
    Adblock Plus
    BetterPrivacy
    NoScript
    PasswordMaker
    Perspectives
    Priv3
    However, the problem still happened in that case.
    Don't know if any of this helps or not. I'm looking forward to trying Firefox 13 when it comes out.

    hello, thanks for reporting back with detailed information.
    from a brief look at your extensions i don't recognize any known (to me at least) memory leaking ones. in the last weeks there were also reports about the java plugin causing high memory consumption in combination with firefox 12 - in case you have it installed in firefox > addons > plugins try disabling it for a few days & test how firefox is behaving with many tabs.
    & although probably not related to the memory problems you could update your graphics driver to get better results with hardware acceleration in firefox - this is the latest driver by intel for your model & os:
    [http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21135&lang=eng&OSVersion=Windows%207%20%2864-bit%29*&DownloadType=Drivers]

  • Is it possible to get a refund if i bought an album with extremely bad sound quality?

    As asked in the title, is it possible to get a refund if i bought an album with extremely bad sound quality?
    I am very unsatisfied with my latest purchase of the album "Never take ffriendship personal" by "Anberlin" ...
    I can find all the songs in much better quality, even on YouTube ...
    I bought two other albums by Anberlin at the same time, on which the sound quality is much much better and perfectly clear.
    is it possible to get some sort of refund ???

    http://support.apple.com/kb/HT1933
    Regards.

  • My MacBook (late 2009 Mac OS X Lion 10.7.5 (11G63) often runs VERY slow...beach ball of death frequently.  My page ins (5.29GB), page outs (5.64BG), and swap files (10GB) seem extremely high in comparison to most other discussions in here.  HELP!!??

    My MacBook (late 2009 Mac OS X Lion 10.7.5 (11G63) often runs VERY slow...beach ball of death frequently.  My page ins (3.29GB), page outs (5.64BG), and swap files (10GB) seem extremely high in comparison to most other discussions in here.   I don't know how to copy the pie chart so it shows on here but here's what it says right now:
    Free - 176 MB
    Wired - 592MB
    Active - 843MB
    Inactive - 432MB
    Used - 1.82 GB
    VM size - 198GB
    The page ins and page outs have 0 bytes/sec in the parenthesis even though the numbers are so high. 
    Any help anyone could provide would be greatly appreciated!!!

    You difinately need more ram. 2gb is the bare minimum to run just the Lion OS, anything extra will slow your Mac to a crawl. Upgrade to 8gb from either Crucial http://www.crucial.com/ or OWC http://eshop.macsales.com/
    And you will be a happy camper!

  • EXTREMELY HIGH URGENT!!!

    Hi! SAP GURUS!
    We've got the following trouble:
    Event Type: Error
    Event Source: SAPDB:T11
    Event Category: Fast
    Event ID: 18606
    Date:  24.03.2008
    Time:  17:18:47
    User:  NT AUTHORITY\SYSTEM
    Computer: SAP-1
    Description:
    The description for Event ID ( 18606 ) in Source ( SAPDB:T11 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: SAPDB - T11; :
    - ERROR   TID: 0xE0  PID: 0xEC8  MsgID: 18606
      ; Could not find account name, Location: 1, rc = 1789.
    What is the problem and what the solution can be?

    Hi Anton,
    as forums cannot guarantee quick answers please don't shout words like "extremely high urgent" and abuse the exclamation marks...
    Instead (if you're are SAP customer): open a support message. If it is really an emergency, set the priority to very High - the message will be answered.
    About your technical problem: well the returncode (rc = 1789) points to some network authentication issues.
    Perhabs you should check MS technet [here|http://support.microsoft.com/?scid=kb%3Ben-us%3B823659&x=11&y=9] (scroll down or search for 'error 1789').
    KR Lars

  • File size extremely high for .avi after render PE 9

    I'm very new to PE and have tried to learn quick to redact info (faces etc) in .avi files for a government agency. I was able to open the file (in the trial version) and make the track matte by dragging the original file to the timeline then dragging it again to the video 2 timeline for the top layer, Question 1) is this the same as copy and paste or am I doubling the size already? Anyway, I was able to get the matte and everything done. Now, to Render and save... I choose computer/avi again (I need to keep it the same) and it took 1 hr 45 min to render it, that seemed long to me but maybe not... but mainly the file size was then 100,883 kb! Starting with a 29.7 kb file. This is what my question is about....could this be right? I can't use it if this is what I get. So, here are the particulars as I got G-spot and looked it up, as per serveral suggestions I saw here. I'm trying to understand the CODEC info but I fear I have a ways to go before I can figure out what I did wrong. (This is my test computer, the future work would be done on a newer, better computer).  The videos I would be working with come from various sources and will vary in length but will probably all be a kind of avi.
    Intel Pentium processor 1600 mhz
    221 mhz, 2.00 gb ram
    Microsoft windows xp sp3
    video:
    length: 0:27.261
    frms:  817
    Kbps: 28770
    pic:  720x480
    codec: dvsd dvc/dy
    I appreciate any help you can give

    Thanks for you response and the information was very helpful. I was able to choose and output that gave me a good file size and I do want DV-AVI (I don't remember what I chose but it worked) but, I don't see an option for DV-AVI - is that a general DV output selection, because there seem to be numerous (AVCHD, NTSC, DV STANDARD) acronyms (I have tried to understand what each is) which do I want?
    From: Bill Hunt <[email protected]>
    To: Mid Century Modern <[email protected]>
    Sent: Wednesday, September 28, 2011 6:07 PM
    Subject: File size extremely high for .avi after render PE 9
    Re: File size extremely high for .avi after render PE 9 created by Bill Hunt in Premiere Elements - View the full discussion
    For the use of Track Matte Keying, with say a Gaussian Blur, or maybe Moasic Effect, if you have not altered the In & Out Points, then just dragging the Asset to both Video 1 and Video 2 will work fine. If you HAVE adjusted the In & Out Points, you can just click-drag from the Source Monitor, where you set those In & Out Points, and all is good. The Copy/Paste is just another way to do it.
    As you are doing an "overlay," the output File Size will not be affected in any way. You are also limiting the Blur, or Effect on Video 2 to just the area "exposed" by the Track Matte, so the pixel count will not be altered.
    As Steve points out, the output CODEC in the AVI will determine the output File Size. File Size is basically determined by the Timeline's Duration and by the Bit-Rate of the output file. With DV-AVI, that Bit-Rate is pretty well set, and your Timeline determines the Duration. At ~ 13GB/hour, a DV-AVI will be pretty large, but that is the nature of the beast. Also, and as Steve points out, if you are going to do additional editing, and will be Importing that file into a New Project, DV-AVI is about as good, as it gets.
    Good luck,
    Hunt
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3943683#3943683
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3943683#3943683. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Premiere Elements by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Extremely High Temperatures

    I have a new 2011 Macbook Pro 17".
    With the i7-2760QM processor.
    Anyway my CPU idle temp sits at around 65C, to me this is crazy.  No idea why it should be this high.
    In addition while gaming I am seeing temps as high as 100C. 
    What can I do to decrease this???
    P.S.
    Running bootcamp

    It would appear that it's not really "idle". My MBA when it is not doing anything out of the ordinary indicates a CPU temperature of 35°.
    65° is not normal but it is far from "extremely high".
    Gaming, Flash video, any processor-intensive activity is going to make it warm in a hurry, but playing HTML5 video in YouTube typically brings mine no higher than 45° or so.
    It is possible an SMC reset might fix the problem, also read the following to identify a particular process that may be taxing your Air's resources:
    Runaway applications can shorten battery runtime
    Edit: I don't know why you posted this in the MacBook Air forum, I was about to verify the temps on my MBP but Mrs. Galt is busy with it

  • Extremely high latency from 4am - 12pm in Baltimore, MD

    Lately for the past month I have been getting extremely high latency 1500ms+.  I am directly wired to the Actiontec router using a new cable on a confirmed working lan card.  I believe the problem maybe at the POD card.  How would I go about proving to Verizon without going through numerous transfers of people that don't have a clue?

    I had the same problem since Mid-June. Seems like it's anywhere in North Eastern United States. I myself is located about 20 Minutes from Washington DC. I get the latency right around 12~50 ms on first hop to Google or verizon.net on a good day with trace route test. The people in Verizon tells me that's normal but I don't buy that because my neighbor gets around less than 20 ms, never higher. It gets progressively bad around prime time and onward. Around 12 AM it can reach from 100~400 ms on latency to Google or verizon.net server.
    I am a late night gamer and need that low latency badly. Seems like most of the people I have talk to from FSC (Fios solution Center) had no idea what is the difference between Bandwidth to Latency. They just call it "Speed". I have spoken with these people for almost every night for a month and a half, when I get a hint that they have no idea what they're talking about, I just hang up and call another one up or just request a supervisor to speak with.
    Here is my trace route result, I have highlight the part that are unacceptable.
    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.
      1    <1 ms    <1 ms    <1 ms  Wireless_Broadband_Router.home [192.168.1.1]
      2    61 ms    54 ms    23 ms  L100.WASHDC-VFTTP-62.verizon-gni.net [96.231.212.1]
      3    25 ms    15 ms    19 ms  G11-3-662.WASHDC-LCR-06.verizon-gni.net [130.81.104.182]
      4    36 ms    17 ms    33 ms  so-4-2-0-0.RES-BB-RTR2.verizon-gni.net [130.81.28.146]
      5    57 ms    65 ms    58 ms  po1.ctn-border1.vzlink.com [206.46.225.85]
      6    56 ms    67 ms    54 ms  po121.ctn-core1.vzlink.com [206.46.225.18]
      7    60 ms    71 ms    68 ms  206.46.228.130
      8    76 ms   102 ms   141 ms  206.46.232.39
    Trace complete
    I'm going to list the things I have done so that perhaps if you are having the same issue, maybe you can anticipate or maybe save you time with this issue.
    Replaced Router
    This will be my 3rd Router in my possession. The odds of having 3 bad routers are astronomical but yet FSC will try to keep sending you more.
    Replaced coax cable (twice), ONT, and splitter.
    Once again, the problem still persist. To get these fix, I had total of 4 dispatchers. From the word of their mouth, they stated it's beyond their level and when it comes to latency the tech at verizon server will be the best people to help you.
    Reset ONT by unplugging it for 5 minutes or more to pull up a new Gateway IP.
    Appearently, someone were able to fix their latency issue this way but the results are mixed. Either it's a permanent fix or temporary fix or it made the problem even worse.
    Optimizing connection/wired connections
    I have a gaming PC, when they ask to clear the cache to solve my problem, it's an insult. Not only it's irralavent, in order for the computer to bog down because of cache overload, I must possess a computer that is less than of Pentium 2 back from 1995.
    Anti-virus and FireWall
    If these were actually the source of my problem then the high latency should be constantly bad.
    Potentially hacked or other connection to your router.
    While this problem can be an issue, I can see who uses the internet and even turned off the wireless. There's no way an uninvited person can slow down my connections.
    The server that I am connecting to such as website and gaming server is not guaranteed by the verizon.
    Yes, that is true but what are the odds of having google, verizon.net, altavista, gaming server from Steam, etc are having the latency issue all at the same time? It is as if they are blaming traffic problem on I-95 for having bad congestion on I-66. It's not relevant at all!
    Verizon in-home Agent
    Must I continue?
    I will now list the solutions that others have found. Please keep in mind that these problems may not be relevant to you.
    1) Bad PON card
    Good luck convincing the verizon that this is the issue. For this to be the issue, people from your neighborhood must experience the same problem. Sadly, the problem is the latency and most people will be completely unaware of the problem as long as they are "online". There were cases where group of people resolved the problem but unfortunately the problem came back again the next day because the network tech at Verizon decided to switch them back to the old one.
    2) Faulty hardware on rack
    As far as I have been told, couple claimed that this has been the issue and was permitted to move their line into another rack.
    3) Switching Gateway IP
    One have claimed that certain Gateway IP they have been assigned are bad. For example, the house you're trying to drive away from has a huge pothole so you have to go around it by taking a detour.
    4) Resetting the ONT by unplugging the battery
    There has been claim that doing this for 5 mintues clears it up. What this actually does is it allows you to get a new Gateway IP and re-establish connections.
    5) They blocked my IP
    Yes, this can happen. I have been blocked once or more perhaps because sometimes I like to purchase and download games from Steam. When I do download, it does so for about an hour to 3 hours depending on the size of the game. Whilst this is going on, my room mate watches movie on Netflex and perhaps download music on the side. Also I watch On-Demand (requires internet). Also not to mention sometimes torrent and other P2P downloads. Check to see if you are blocked.
    6) Last but not least, Verizon is purposely gimping our latency to squeeze budget.
    There has been talks and speculations that since many primary account holders are not advance users. In otherwords, many would settle for just being "online". This supports the claims for having such a low standard for latency management in verizon. If so, Verizon must stop advertising their "fast" gaming gimmick that they display on their commercial.

  • Extremely high 3g traffic since updating my iPhone 4 to iOS 5

    Hi!
    Since I updated my iPhone 4 to iOS 5.0 I recogniced that my device is generating extreme high amounts of traffic on 3G.
    Sometimes 60MB each day (= 1,8 GB traffic per month, but only 1GB data option, could get expensive)!!! Before updating I had this traffic in about a week or so.
    I have already shut down ALL sync services, I am not logged in to GameCenter or other services.
    Before updating to iOS 5.0 I also used Twitter & FANCY and so on, these apps generates a lot of traffic when using them several times each day.
    Now I have already deleted Twitter and FANCY and some other apps and anyway the traffic generated by the OS itself is really huge!!!
    Anyone has the same problem or anyone can help me finding the reason for this high traffic in iOS 5.0??
    Also some location services are permanently running and are killing the battery within a day... Why are they always turned on?
    Now I turned off all location services and the battery life is still bad - only 1,5 days with low usage (former 3 or 4 days)...
    Please help!!
    Thanks in advance,
    Wolfgang

    Hi Urs
    I searched a lot and maybe found a part of the reason for this high data traffic.
    I'm synchronizing my contacts, calendar & reminder with iCloud & my mail with Hotmail.
    When push is activated for Hotmail, that doesn't matter, but when push is activated for iCloud, the amount of data nearly explodes. So I turned iCloud to manual and let Hotmail on push.
    Contacts, calendar & reminder are synchronizing when opened (I think this is enough).
    Also I do a backup on iCloud and than I deactivate the function (I do not delete the last backup, I only deactivate the option for automatic backup).
    It seems, that the backup functionality also generates traffic when not on WiFi - especially at night!!
    The battery life has been getting better, when I deactivated the support for automatic time zone changes (location services were always on).
    The battery finaly got MUCH BETTER since the update on iOS 5.0.1.
    My traffic is actually higher than on iOS 4 but not so high as before I deactivated some services...
    I hope this info is a little help for you!!
    Let me know if this works for you, ok?
    Best regards,
    Wolfgang

  • Kernal_Task Running extremely high

    I have had an ongoing issue for well over 6 months.
    The kernal_task will periodically run extremely high on my 17" MBP, early 2011
    I have run a EtreCheck on the machine.
    The report is below. Any help would be greatly appreciated.
    Thanks,
    Doug
    Report:
    Hardware Information:
              MacBook Pro (17-inch, Early 2011)
              MacBook Pro - model: MacBookPro8,3
              1 2.3 GHz Intel Core i7 CPU: 4 cores
              16 GB RAM
    Video Information:
              Intel HD Graphics 3000 - VRAM: 512 MB
              AMD Radeon HD 6750M - VRAM: 1024 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 0:8:1
    Disk Information:
              ST95005620AS disk0 : (500.11 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 499.25 GB (131.48 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-898 
    USB Information:
              Apple Inc. FaceTime HD Camera (Built-in)
              Logitech Logitech USB Keyboard
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. Apple Internal Keyboard / Trackpad
              Logitech USB Trackball
              Apple Computer, Inc. IR Receiver
              Apple Inc. iPhone
              Apple Inc. FaceTime HD Camera (Display)
              Apple Inc. Display Audio
              Apple Inc. Apple Thunderbolt Display
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
                        Apple Inc. Thunderbolt Display
    Kernel Extensions:
              com.Logitech.Control Center.HID Driver          (3.9.1 - SDK 10.8)
              com.bresink.driver.BRESINKx86Monitoring          (9.0)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
    Launch Agents:
              [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [System] com.adobe.AdobeCreativeCloud.plist 3rd-Party support link
              [System] com.brother.LOGINserver.plist 3rd-Party support link
              [System] com.canon.MFManager.plist 3rd-Party support link
              [System] com.Logitech.Control Center.Daemon.plist 3rd-Party support link
              [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
              [not loaded] com.google.Chrome.framework.plist 3rd-Party support link
              [not loaded] com.leadertech.PowerRegister.LGT2.c59807af95d106639fca8f10676ced62.plist 3rd-Party support link
    User Login Items:
              smcFanControl
    Internet Plug-ins:
              Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 3rd-Party support link
              FlashPlayer-10.6: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              Flash Player: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
              AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    User Internet Plug-ins:
              WebEx64: Version: 1.0 - SDK 10.6 3rd-Party support link
    3rd Party Preference Panes:
              Flash Player  3rd-Party support link
              Flip4Mac WMV  3rd-Party support link
              Java  3rd-Party support link
              Logitech Control Center  3rd-Party support link
    Bad Fonts:
              None
    Old Applications:
              None
    Time Machine:
              Skip System Files: NO
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 464.96 GB Disk used: 342.52 GB
              Destinations:
                        Newertech miniStack V3 [Local] (Last used)
                        Total size: 465.64 GB
                        Total number of backups: 45
                        Oldest backup: 2013-04-27 03:23:32 +0000
                        Last backup: 2014-02-10 16:02:57 +0000
                        Size of backup disk: Too small
                                  Backup size 465.64 GB < (Disk used 342.52 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
              /sbin excluded from backup!
              /usr excluded from backup!
              /System excluded from backup!
              /bin excluded from backup!
              /private excluded from backup!
              /Library excluded from backup!
              /Applications excluded from backup!
    Top Processes by CPU:
                  21%          Mail
                  16%          WindowServer
                   5%          mds
                   4%          recentsd
                   2%          NotificationCenter
    Top Processes by Memory:
              475 MB          mds_stores
              311 MB          Mail
              164 MB          com.apple.IconServicesAgent
              115 MB          WindowServer
              115 MB          Safari
    Virtual Memory Information:
              11.49 GB          Free RAM
              2.51 GB          Active RAM
              470 MB          Inactive RAM
              1.53 GB          Wired RAM
              331 MB          Page-ins
              0 B          Page-outs

    For those that have looked at this post... I may have found the remedy to my issue.
    I spoke with Apple Support and we went through the normal proceedure:
    1) Run Disk Utilities...check
    2) Delete cache files, reboot
    The machine was still running high unless I disconected the ThunderBolt Monitor... it would then run normal. If I plugged it back in, eventually the kernal_task would go extremely high.
    So, a thought came to mind,
    I had recently purchased a 27" iMac with a second 27" monitor,
    So in talking with Apple we decided that changing out the monitor to the "new" 27" one would at lease confirm that the monitor is not the issue.
    When I changed it out... my MBP worked perfectly!
    Here is where it gets interesting...
    I ran the MBP with the "new" monitor for enough time that it should have spiked the Kernal_Task. It didn't.
    I then, because of the set up, disconected the "new" monitor and reconected the "original" monitor,
    It has been over 24 hours now and the MBP has NOT had any Kernal_task spikes at all!!
    So, at lease for me, the issue seems to be solved.
    Now, I would like to know why.
    Could connecting the "new" monitor have changed a setting that was corrupt within the MBP?
    Anyone with any ideas?
    Doug

  • Sequence preset H.264 Extreme High Quality (XHQ) 50Mbps for JVC GY-HM 850e

    Hi there,
    I'm wondering if there is ( or coming soon)  a sequence preset for the new JVC GY-HM850e for editing in the H.264 Extreme High Quality (XHQ) 50Mbps mode.
    I'm using Adobe premiere CS 6
    Regards,
    Martin Beeren

    It's not that CS6 isn't 'supported'.  You can still get help for it, it will still receive bug fixes and whatever updates are needed to work with new Operating Systems.  But CC is the latest version, and it's pretty common practice for companies to put new features only in the newest version.
    It's common for hardware, too.  How often do you see the dealer adding new features to the car you bought last year?  Normally you need to buy this year's model to get the new features.  The only difference is that you can no longer buy, you have to lease.  Some don't like that and will do without the new features.  But the warranty on last year's model is still good.
    Once again, you can get the needed sequence by right clicking on a clip in the bin and selecting New Sequence from Clip.

  • Extreme high consumtion without knowledge 4G

    extreme high consumtion without knowledge 4G

    Just mb, 5Gb is used before end of these last month even if wifi is mostly used. Just think it may perhaps be adjustment on the pad or iphone that's eating capacity in background or similar,are using twin cards.

  • Xorg causes extrem high cpu load

    Hello,
    from time to time xorg causes a extrem high cpu load on my system.
    http://imageshack.us/f/38/xorgload.png
    After a reboot it should looks like that
    http://imageshack.us/f/16/xorgnormal.png/
    Is there any possibility the figure out why this happens sometimes?
    Thanks for your help!

    cerbie wrote:And, do I know you from somewhere--a little more Windows-centric--or are there many ElkMonsters, out here?
    Hehe, I'm also wondering how many Cerbies are out there...
    Really funny. The internet is a small place, obviously. Us meeting in a Linux forum also explains why nobody writes to the LSML anymore.

Maybe you are looking for