Extremely long song load time

Hi all,
I have a couple files I'm currently working on that take very long to load, one of them over an hour. I'm using 5 or 6 audio instruments, some have the "Play" plugin, which may contain a few patches on different midi channels. Also, I have an Ivory Piano plug on one of the channels and 3 or 4 audio tracks. There are no frozen tracks.
Any ideas why it would take so long to load these files? I don't feel I'm using many plugs since I will need to use more for more complex projects.
Thanks,
Cobb

Hi,
Thanks for responding. Yes, I have no choice but to wait. I have to get the song loaded so I can work on it.
I have a lot of drives, but all the files related to the project are on a fast internal drive. The next step is to disconnect all my drives to see if that helps. Maybe one of the plug-ins is causing the problem. I can load the file without plugs and maybe try turning some off to see if the file loads.
I force quit Logic and tried again. It's been 50 min so far and the arrange window still hasn't loaded. It will load eventually... I hope. When it does, I'm going to bounce all the software instruments to audio and start a new file.

Similar Messages

Long Image Loading Times From LR to CS6?

Hello Folks,
I seem to be experiencing very long image loading times when loading an image into CS6 from LR4.
When I right click an image in LR4 and select edit-in CS6, CS6 immediately starts up, and loads. But after CS6 is fully up on my screen, I get
a spinning ball first, then spinning white/grey circles, until my selected image appears within CS6.
I am operatinng with an iMac 27 2.8G with 8G of memory and using SL 10.6.8 I have about 300G of free space on my HDD.
Any ideas or suggestion or settings in CS6 I might need to look at would be appreciated.
I never experienced this issue as I recall in CS5.
Jim

Curt,
Thanks, yes I do have the latest version of Snow Leopard, which is 10.6,8 and it is updated with all of the latest updates in drivers.
Jim

Long bios load time with gtx970 - maybe need gpu bios update?

I just installed my gtx 970 and it all runs fine. However I get a very long bios load time on boot up. Normally it only takes a second or two with a single beep. With the 970 though I get the single beep and the bios load screen, but it sits at that screen for a long time, then another beep, waiting, eventually another beep, and after some more waiting windows will start to load.
My problem is that now I can also no longer get in to the bios. I have tried even plugging in a ps/2 keyboard to see if maybe that could get me in. The farthest I get after hitting delete to enter is I just end up at a black screen. My mobo has no onboard gpu output, so its not like its trying to go to a monitor I cant see.
So would any gpu bios updates fix this? I am currently at the latest bios for my board which updated it to a uefi bios.
cpu: i7-2600k (yes Im aware I will only have pcie2)
mobo: gigabyte z68 d3-b3
ram: 16gb
gpu: MSI gtx 970 Gaming (previous was an evga gtx 660)
SN:602-V316-050B1412042805

Quote from: lucianobessa on 02-January-15, 10:48:08
Under bios features, is there a option called boot mode select?
Try to switch to "legacy only", save and reboot.
Are you using HDMI connector? Try to use DVI.
Sorry for my english!
I dont remember seeing any boot mode select. As far as connections I am using all DVI for my monitors. I have also tried only having a single one connected in case there were issues with multiple monitors
Quote from: Svet on 02-January-15, 10:56:46
with those old boards, you need ME8 to works with modern cards
ask gigabyte support about it
Thanks Ill try emailing them. Is ME8 some other bios? Just never heard of it before
-edit
After reading up it looks like it was just a revision to allow ivy bridge devices, which happened a long long time ago on a bios update:
Support Intel 3rd generation 22nm E1 stepping CPU (Ivy bridge)
Improve power on issue
Update ME / CPU code
Unless theres something else Im missing about ME8

Any reason for the long sporadic loading times during reboot

Hi guys,
Just wanna find out more abt my experiences of encountering long loading times during a restart (up to 5mins). I do see the apple logo and the spinning wheel and it spins for like 2 mins, moves on the an all blue screen and fixed there for another 1 min and then the loading OS X meter. I suspect that the long loading time could be the cause of new softwares that I've installed or that I didn't reboot for days. Anyone care to share their experience and views on this? Is this normal? I feel that its long because usually restarting only take 1min or so to reach my log in screen.

15 seconds for a restart here ... something's not right with 2-5 minutes.
- If you login as another user does it take as long?
- Have you run Disc Utility and Repaired Permissions lately?
- What about running the Daily and Weekly 'chron' jobs? (OnyX or MacJanitor etc)
- Have you got haxies or similar extras in your StartUp folder?

Very long portal load time in IE

Hi,
I have few users who reported that our portal was running really slow. Using HttpWatch (http trace tool), I learned that their browsers were taking three to four times longer to load portal pages than it should take. HttpWatch also showed that more than half of transaction time was spent on waiting to get response after sending a request to load innerpage inside the framework page.
Now, it gets confusing.
Only these few users are having this problem. They have the same problem even when they logon to someone else's computer and visit the portal. Others who log on to these users' computer and visit the portal do not have this problem. I think this eliminates problem on the clients' computers, network, portal server, and portal configuration.
I don't know where to look to trouble shoot this. Did anyone have a similar problem? Does anyone have suggestions on where to look to troubleshoot this?
Thank you.
Joon,

Hi,
It could be that these users have different Portal Desktops.
Normally Light Desktops loads faster than Default Desktops.
So look into Portal rules to check if these users are assigned different desktops.
http://help.sap.com/saphelp_nw70/helpdata/EN/4b/29cf122f414721964269e1b675d62c/frameset.htm
Regards,
Praveen Gudapati

Extremely long log on time using Time Capsule and Airport

i'm really confused as to why when I start up my macbook, connecting wirelessly via time capsule and airport that it takes an extremely long time to log in and the internet connection seems unusually slow. is there a setting that's off? when i log on at work to a different router and wireless connection it starts up right away. any advice appreciated.

1. no idea.
2. I get the same issue. Set the brightness at a certain low level - and most often when i performa a full restart of the computer - the brightness is usually at full blast.... I've had this happen for about 5 months now and have never bothered to call in about it - if it hasn't been fixed yet - I'll just deal with it as it only takes a second to correct... but yes - annoying....
3. Same as you - and this is the funny thing...... Mine used to start pulsing immediately when the lid was closed. IT changed for me in the last 2 months or so. That - and also - when performing a shutdown of the computer - it just get a grey sinning circle on the middle of the screen for about 10 or 15 seconds..... very similar to the wait for the pulsing light....
I reinstall OSX every month or so for various testing purposes - and I usually just put all the updates on immediately. next time - i will run the vanilla OSX that came with my re-install cd and check out condition 3 to see if it is an update that has caused that delay.
So - you're not alone/

Extremely long data xfer times for table ETXDCH

Hi;
Table ETXDCH takes an extremely long time to transfer. It is infact one of the smallest tables, with very few indexes.
Any Idea why it may be so? I tried changing the read and write behavior but still stuck in progress.
Thanks
Harmeet

Hi Harmeet,
Check from SM50 transaction on what maximum time is being spent. Have you used any scrambling rules here? Is there repeated hits to table CNVMBTRENAME seen from transaction SM50,
Regards
Raghuram

Slow song load times

Hey guys, I just got the shuffle, and i loaded it up for the first time (I checked hte option to convert high bitrate songs to 128k AAC so i can fit more songs on it) and it took 5 hours to load the 512 mb shuffle! Why is it so slow? My computer has USB 2.0, and all other storage devices take minutes to fill, why does it take so long for the shuffle to fill up? Is it because of the AAC option? will unchecking it speed it up a good 4 hours? thanks

Hey there!
I've got exactly the same problem.
Could you fix it in the meantime?
Thanks for answering,
John

Adobe flash takes extremely long to load

Hello all,
My adobe seems to be having some major issues. I just bought the parts for this computer (Specs listed below) and put it together. Its very top of the line everything is smooth and runs EXTREMELY fast. I dont understand why I cant seem to get flash to work right. Initially I thought it was just because I had an old version but I upgraded to the newest version and its still the same. I finally downloaded firefox and chrome to see the difference and they both work alot better then IE but not perfect. Still kinda choppy. IE is by far the worst though giving me sometimes a blank page, only way to view it then is to highlight the page and magically the flash document appears. Other times its just extremely slow and doesnt always load the entire page or object. I am currently updated to the newest releases of IE ( i think its 10 but it was still doing the same thing in ie8 or whatever it was before i updated that aswell i think), Mozilla Firefox and google chrome. As I said much better but not 100% on firefox and chrome but I much prefer IE and its barely if it all working there. Any suggestions? (newest flash installed aswell) Check out my specs below see what you think?
Mobo: MSI 970a-ga46 (latest bios update i think 2.1)
Processor: AMD FX-8350 4.0ghz (Slightly OCd to 4.3ghz never above 50degrees)
OS: Windows 7 Pro 64bit (updated to latest updates with all .net framework installed/updated if thats relevant)
Graphics Card: Currently using Zotac Geforce GTS 250, but my gf literally just now went to go pick up my new Sparkle GTX 560ti from the post office. I will post if the change effects flash at all but I dont imagine flash takes much power as the GTS250 already ran every game on max and never had issues before (only part from old system)
Storage: Corsair Force Series 3 90gb SSD
I think most everything else is fairly irrelevant if half of that wasnt anyways and as I mentioned I dont have the versions but i updated flash to the newest and it worked the same before as after. I am not sure if I updated explorer before or after I checked if flash worked though but I have the latest explorer version. I think its mainly IE but I still dont like the performance of the chrome/firefox either (might just be my somewhat slow internet on those though but IE is jacked). Thanks for your time please let me know if any suggestions or questions.
-David
Post edit: flash version: 11.7.700.202
IE version :10.0.9200.16576
firefox: 21.0
chrome: 27.0.1453.93 m
not sure if they are updated as of today was like a week ago but i pulled the versions from each

Thank you for your prompt answer Pat. The weirdest thing I install the new graphics card, No issues in IE with flash. I tested that same page you linked (find version page) with the other video card and it was very choppy but loaded fairly fast. Now its mostly smooth but the ball still gets choppy which I assume it should be smooth. I was using camel.com as a test as they seem to use alot of flash based content. I seem to have no issues now (other then the ball getting choppy randomly). I dont know what could have possibly been wrong with the other card. I do know that my computer boots up differently with this new card. When I installed it initially my computer started showed the bios splash and instantly turned off (scared me). So I push power again and theres a black screen with a few words about some driver being loaded or something and something about nvidia corporation (dont get long time to look at it really). Then it dissappears goes to bios splash then windows. I tried to fresh install the driver (same driver from previous card auto-installed when i got into windows i then uninstalled and installed fresh newest version) and this issue continues to happen. Slows my boot time significantly. Also now when I restart my computer it doesnt power down at all it just continues to run (used to reset, the lights would flash off for a moment then back on, fans would turn off etc.). I dont know if this is a problem or a feature or what but its a little worry-some.
Anyways I suppose the new issue (if it is a issue) is un-related to adobe. I guess maybe there was something wrong with the GTS250? I really am confused as to what it could have been. But all seems well with flash now. Again thanks for your prompt response and sorry for the waste of time. If you have any knowledge in the graphics card department any suggestions would be appreciated. Thanks again
speed test: http://www.speedtest.net/result/2726090663.png

Very long applet load time with JRE 1.5 - HELP!!

My applet is taking forever to load and init using JRE 1.5.
With JRE 1.4.2_06 it takes a matter of seconds to load and init. The same 1.4.2_06 compiled code running on JRE 1.5 takes ~ 17 minutes!!! Is anyone having a similar experience? I've seen other similar posts related to past plug-in versions, but nothing related to 1.5. The same problem occurs if I compile the code with JDK 1.5 and run with JRE 1.5.
This extreme example happens on a 533 MHz Win2000 pc with 524 MB RAM.
A desktop with 3 GHz P4, 1 GB RAM running WinXP SP2 doesn't have an appeciable delay (a couple seconds).
A laptop with 2.21 GHz AMD Athlon 64, 512 MB RAM running WinXP SP1 takes about 8 seconds to load the applet.
I don't believe it's running yet in the init method during this long wait time. I don't see any print statements, but the basic layout of it is the following:
     public void init()
          applet = this;
          // Setup Look and Feel
          try
               UIManager.setLookAndFeel (UIManager.getSystemLookAndFeelClassName());
          catch (java.lang.ClassNotFoundException e) {System.err.println("Error setting Look and Feel.");}
          catch (javax.swing.UnsupportedLookAndFeelException e) {System.err.println("Error setting Look and Feel.");}
          catch (java.lang.IllegalAccessException e) {System.err.println("Error setting Look and Feel.");}
          catch (java.lang.InstantiationException e) {System.err.println("Error setting Look and Feel.");}
          // Setup background coloring
          HeaderFile.bgcolor5 = UIManager.getColor("Panel.background"); //new Color(212,208,200);
          HeaderFile.bgcolor6 = UIManager.getColor("desktop");
          applet.getContentPane().setBackground(HeaderFile.bgcolor6);
          // Splash screens
          urlSplash = getURL("AesGuiLarge.jpg");
          ImageIcon_Splash = new ImageIcon(getURL("OmniViewSplash_noWords.jpg"));
          ImageIcon_OmniView = new ImageIcon(getURL("OmniView_wordOnly.gif"));
          // Setup Intitialization panel
          final InitializationPanel initPanel = new InitializationPanel();
          contentPane = getContentPane();
          if (preRelease == true)
            Label label = new Label("PRE-RELEASE");
            label.setFont(new Font("SansSerif", Font.BOLD|Font.ITALIC, 11));
             JPanel panel = new JPanel();
               panel.setBackground(Color.yellow);
               panel.add(label);
               contentPane.add(panel, BorderLayout.SOUTH);
          contentPane.add(initPanel, BorderLayout.CENTER);
          Thread initialize = new Thread ()
               public void run()
                        System.out.println("\n***** Initialize thread start *****\n");
          initialize.start();
     }Any help would be appeciated.

I've discovered where the bulk of the delay is coming from.
I have 23 default *.properties files in my project. These files contain the English translation of all displayable strings for Internationalization (I18N). The default naming convention is "text.properties".
For those who don't know I18N, here's a brief synopsis of what happens. ResourceBundles are used to get the strings that are displayed. if your local computer's language/regional settings are English/US, then when the ResourceBundle searches for the file that contains the strings it first looks for a file named text_en_US.properties. If that file is not present or the string is not located, it then looks for a file named text_en.properties. If that file is not present or the string is not located, it then looks for the default file named text.properties. My properties files are all default named.
I used the Java Console tracing capability to see what was happening and this is what I saw. This is happening for every .properties file:
Using JRE 1.4.2_06:
Connecting http://dummy.com/demos/AES/1_4_2_06/fax.class with no proxy
Connecting http://dummy.com/demos/AES/1_4_2_06/fax_en.class with no proxy
Connecting http://dummy.com/demos/AES/1_4_2_06/fax_en.properties with no proxy
Connecting http://dummy.com/demos/AES/1_4_2_06/fax_en_US.class with no proxy
Connecting http://dummy.com/demos/AES/1_4_2_06/fax_en_US.properties with no proxy
Using JRE 1.5:
network: Connecting http://dummy.com/demos/AES/1_4_2_06/fax.class with proxy=DIRECT
network: Connecting http://dummy.com/demos/AES/1_4_2_06/fax.class with cookie "PHPSESSID=e4aad164588f860e495812ec5c52326c"
network: Server http://dummy.com/demos/AES/1_4_2_06/fax.class requesting to set-cookie with "PHPSESSID=e4aad164588f860e495812ec5c52326c; path=/"
network: Connecting http://dummy.com/demos/AES/1_4_2_06/fax_en.class with proxy=DIRECT
network: Connecting http://dummy.com/demos/AES/1_4_2_06/fax_en.class with cookie "PHPSESSID=e4aad164588f860e495812ec5c52326c"
network: Server http://dummy.com/demos/AES/1_4_2_06/fax_en.class requesting to set-cookie with "PHPSESSID=e4aad164588f860e495812ec5c52326c; path=/"
network: Connecting http://dummy.com/demos/AES/1_4_2_06/fax_en.properties with proxy=DIRECT
network: Connecting http://dummy.com/demos/AES/1_4_2_06/fax_en.properties with cookie "PHPSESSID=e4aad164588f860e495812ec5c52326c"
network: Server http://dummy.com/demos/AES/1_4_2_06/fax_en.properties requesting to set-cookie with "PHPSESSID=e4aad164588f860e495812ec5c52326c; path=/"
network: Connecting http://dummy.com/demos/AES/1_4_2_06/fax_en_US.class with proxy=DIRECT
network: Connecting http://dummy.com/demos/AES/1_4_2_06/fax_en_US.class with cookie "PHPSESSID=e4aad164588f860e495812ec5c52326c"
network: Server http://dummy.com/demos/AES/1_4_2_06/fax_en_US.class requesting to set-cookie with "PHPSESSID=e4aad164588f860e495812ec5c52326c; path=/"
network: Connecting http://dummy.com/demos/AES/1_4_2_06/fax_en_US.properties with proxy=DIRECT
network: Connecting http://dummy.com/demos/AES/1_4_2_06/fax_en_US.properties with cookie "PHPSESSID=e4aad164588f860e495812ec5c52326c"
network: Server http://dummy.com/demos/AES/1_4_2_06/fax_en_US.properties requesting to set-cookie with "PHPSESSID=e4aad164588f860e495812ec5c52326c; path=/"
None of the files in these traces exist. JRE 1.5 is attempting to set cookies on each of these non-existent files. There is approximately a 5-8 second delay that occurs before each attempt times out. So for each of my 23 properties files this translates to 575-920 total seconds (or 9-15 minutes).
I tried turning off cookies, but the timeout still occurs.
Can anyone explain why this is happening and how to fix it?

Long file Load time

I have a Captivate video that is about 171 slides long. It
has an audio commentary on each slide.
I did a lot of editing on the video to sync the audio up to
the slides perfectly. I saved the file and closed Captivate.
Now when I try and load the file, Captivate is stuck on the
"Loading project" progress bar. The bar is full but Captivate won't
finish loading. I have tried this several times, letting is run for
a few hours each time.
I cannot load the file. Is there anything that I can do to
recover my work?

This is not exactly "on point" but word is that if the entire
path exceeds 128 characters, Captivate blows. The "path"
description is the full path beginning with root of the drive on
which it is saved (C:\ normally) and ending with the extension (CP)
in the filename.
Just thought I'd throw that out for what it's worth.
The long and short is that Lynn is probably right on about
the filesize being just too large. "ziv" - in the thread Lynn
pointed to had a CP (project) file that was 380 MB. "Redune" in
this thread has stated his project is 171 slides long, which could
be too large, or perhaps *really* too large, depending on what is
in the project and its physical size in pixels.
Sorry I'm not more help - just throwing in a "me too" to
Lynn's observations . . .

Song load times?

Maybe it's just my crappy computer (see below or in my profile for more info), but iTunes takes about .8 seconds to load each song. It is especially noticeable on Tracks that transition into the next one. I changed the crossfade to 1 second, but it's not perfect.
I'm a prospective buyer, so I was wondering- does the iPod have this same problem? (PLEASE say no!)
2005 Gayass brand (aka dell) Windows XP Pretty f'in gay. Only 80 friggin gigs. 512 Megs of RAM. Utter crap by today's standards. Etc...

If you are planning to arbitrarily browse through songs, I would not go with a hard drive based iPod, or any hard drive based mp3 player. Hard drives suck up a ton of battery power, so the iPod software shuts the hard drive off as often as possible. As such, if you frequently skip back and forth through playlists, or switch playlists a lot, it's going to be spinning up and down a lot, and it does take about 1-3 seconds for it to spin up and load something. It's not really a big deal if you are just going to pick a playlist and listen to it.
If you don't want that latency, get a flash memory based iPod.
Hope this helps!
-Aaron
PS you might want to consider changing your computer profile. I know it's all true, but Apple can be pretty anal about language in the forums (it used to not even let you use the word "suck" in posts, even in the context "the laptop ***** the battery dry."). I'm not really trying to complain or anything though, just wanted to let you know!

Photoshop CC 2014 unusual long initial loading time.

Never had this problem with Photoshop CS6.
OSX Yosemite
Macbook Pro Retina 2013
Just bought CC last night, every time I open Photoshop CC, the app works fine for a few second (before the welcome screen popup) then goes into a 45sec - 1min loading, the mouse pointer changes to the rainbow spinner during the period of time and Photoshop isnt responding to any input. After the loading is done, the welcome screen pops open and everything is fine again...its very strange and frustrating.
This is all happening without opening any image files, just trying to run PS itself.
Any ideas?

As you can see from the crash details, your AMD video card driver is crashing.
You need to update your video card driver from AMD's website (not Microsoft or a system builder).

Long reboot/load time after update installation... help!

I just bought a new iMac tonight and I installed the updates and my computer rebooted and has been on this blue screen with the circle loading symbol spinning... I don't know if its just stuck there or if its actually loading... its been nearly 2 hours!
Any ideas?
Thanks!

Nevermind =)

Youtube loading times are crawling

Hello, ever since I purchased my 13" aluminium Macbook Pro I have encountered extremely long YouTube load times. No matter what the quality of the video is, it usually a few minutes to buffer. This does not seem to be an ISP problem due to the fact that I have Verizon Fios. Anybody out there that has been having the same issue or knows of a solution to it.
Thank you, Sincerely Logically Undeniable.

Adobe Flash player is 3rd party software. YouTube is a flash/FLV site which Quicktime does not support. With the help of Adobe Flash player and Perian, you should have no problems playing YouTube videos.
Adobe Flash Player Software
Perian
After the installations don't forget to repair permissions and restart your computer.
Message was edited by: CMCSK

Extremely long song load time

Similar Messages

Maybe you are looking for