Extremely long time of boot up, approximately 10 minutes. Need help!
Hello! The case concerns a MacBook Pro 13" A1278 (mid 2010). After a clean installation of OS X Mountain Lion, computer startup time has increased from tens of seconds (Snow Leopard) to approximately 10 minutes (it varies between 8 and 12).
The startup disk is indicated properly in the system. I performed a SMC reset, NVRAM/PRAM reset and it didn't work. Computer passed AHT tests, then the hard drive was scanned for permission errors - all of a few has been repaired. Next I scanned the disk for any bad sectors, which did not reveal any errors in this regard. Finally I used Drive Genius 3 to defragment. All these treatments did not produce any results! To avoid misunderstandings - the computer is fully functional in the sense that after this long, long startup, my Mac is working completely fine. What could be causing this extremely long startup time? Let me add that I live in a country where there are no Apple stores, so I can't go to the Genius Bar. Please help!
Open Disk Utility from the Utilities folder. Select your disk and click on Check Disk. If this reports any problem you will need to insert your original install disk and restart holding the c-key until you see the grey Apple logo. Select language. On the next screen there will be a menu bar. Open Disk Utility from the Utilities menu, select your disk but this time you will be able to select Repair disk. If successful rerun Repair Disk to check that no further repairs are needed, then restart normally.
You could also run Apple hardware test to see whether it's a hardware problem.
Note that other software you might have installed can slow down the startup as can any that you have chosen to have started at login.
There are other things that can be done but report back to this forum after you've followed suggestions offered - either to let us know we helped or to let us know that there's no change.
Neville
Similar Messages
-
User account dock is missing, account freezes after approximately one minute, need help...
Recently a friend used my computer and download JiTouch and BetterTouchTool to my machine without my permission. He may have made additional changes, and I'm not certain this was definitely the cause, but shortly after that - the next time I restarted my computer and signed into that particular account, my dock would not appear, if I attempt to view System Preferences (specifically the "Dock" option) or after approximately one minute, the machine will begin to freeze intermittently until about 30-60 more seconds when it's entirely unresponsive except for mouse movement.
Other accounts on the machine don't seem to have problems. I even removed the contents of ~/Library/Preferences without luck.
However, immediately after this issue occured I uninstalled those tools and removed their files from ~/Library/Preferences and seemed to resolve the issue. Then shortly after I installed JiTouch and uninstalled it to see if the issue re-appeared. It did not. Then I re-installed BetterTouchTool and eventually (after using the machine for an hour or two) the issue reappeared. I followed the same steps I had done before to stop the freezing but the issue persists.
Any ideas? Thanks!
PS I got a new battery a few days ago (around the same time this issue started occurring) and this battery is draining more rapidly then the system is reporting it should. Possibly connected?Looks like I can't change my Keychain Access password without knowing the previous one, which is mysteriously different of course. Nothing left to do but delete it and start all over again. Bummer! I hope none of those have been altered too. I just don't understand how all this happened in the first place though. If my HD drive is encrypted, and Virus Barrier X6 is active and supposedly doing it's thing, how did anyone get into my computer and change all this?
-
P35 Platinum very long time to boot : " initializing " stay for minutes like
PLS help.
I have an q6600 G0 @ 2400
a-data 4 * 1024 ddr 800 @ 800
enermax coolergiant 600W
Stay to much to boot , couple of minutes with " initializing " screen , then boot normaly. What should i do with this loooong boot ??? it is very anoing.
ty , Lucian
hello again !
i resolved the problem
after 5 hours of testing N kits of memory the problem was at the IDE port . it 's NOT compatible with all dvd units , after removing the cable from the phillips dvdrw all gone geast PERFECT , stupid ...i know ...
i was push in mistake by the MSI panel with led's it was stopping at initiliazing memory ( by the book )
ok. ty all -
Extreme render time compressor ProRes (LT) to H.264. need help.
I have a 24 minute project that I'd like to export from FCP7 using Compressor 3.
Currently, the estimated time to completionis 12 hours and 36 minutes and increasing.
and (according to my Activity Monitor) Compressor is using ~375% of the CPU.
i am frustrated.
I shot with a Canon Rebel T2i @ 720p/60
All video files were converted to ProRes422 (LT) before editing.
Using a 27' iMac w/ 2.93 GHz i7
I will be uploading the compressed file to vimeo, whose Compressor settings recommendations i have used and are as follows:
extension: .mov
Audio encoder: AAC, stereo, 44.100 kHz
Video Encoder:
format: QT
W: 1280
H:720
Pixel aspect ratio: square
crop: none
padding: none
Frame rate: (100% of source)
selected: 60
frame controls: off
codec type: H.264
multi-pass: on, frame reorder: on
pixel depth: 24
spatial quality: 75
min. spatial quality: 75
key frame interval: 30
temporal quality: 50
min. temporal quality: 25
average data rate: 5.12 mbps
every time i try to export with these settings, it takes upwards of 12 hours, and the only time a project has completed, the video file is over 5 hours long and more than 5 gb.
i would be delighted if anyone can provide insight and direction in how i can more effectively prepare my video for uploading to the internet.
thanks
andrewHave you tried setting up a cluster using qmaster in system preferences and submitting to the cluster in compressor. That can speed things up enormously. Check out the manual and do some searching here on how to setup. If you can't figure it out, post back and I'll try to help.
If you need to do this regularly, I think Matrox makes a hardware solution that speeds up h264 exports.
http://www.matrox.com/video/en/home/ -
Extremely long time when executing an export transaction data package link
Hi,
I am working in a packagelink to export transaction data to the application server. The package which I am currently using is /CPMB/EXPORT_TD_TO_APPL. I use it to generate an output file which I later use in a different appliation to register modifications applied in BPC.
It has been working correctly without problems for a time. The problem is that suddenly it stopped working. Maybe because of some changes in the dimension library (is it feasible?) . I defined and scheduled again the packagelink and it began working correctly again, but the time it takes to execute the process is really long. Approximately it takes above 10 hours, which is an extremely long time for the process. In the beginning, the packagelink was executed in an hour and a half. Could anybody tell me any idea about what can be the reason of this problem?
Any help will b much appreciated.> Database error text........: "POS(1) System error: BD Index not accessible"
> Database error code........: "-602"
> Triggering SQL statement...: "INSERT INTO "/BIC/SZD_PROD" ( "/BIC/ZD_PROD",
> "SID", "CHCKFL", "DATAFL", "INCFL" ) VALUES ( ? , ? , ? , ? , ? )"
Hi Hari,
looks like you are hitting a BAD index.
Check the [DB50|http://help.sap.com/saphelp_nw04s/helpdata/en/9c/ca5bb3d729034aaf6f4cea2627c2f2/frameset.htm] or the DBMGUI - there should be warnings about this.
To fix this issue, either use the DBMGUI -> Recover -> [Indexes|http://maxdb.sap.com/doc/7_6/30/5ada38596211d4aa83006094b92fad/frameset.htm] function or logon to dbmcli, get an SQL session ([sql_connect|http://maxdb.sap.com/doc/7_6/11/8af4411cf5c417e10000000a155106/content.htm]) and use the [sql_recreateindex|http://maxdb.sap.com/doc/7_6/30/f7c7f25be311d4aa1500a0c9430730/content.htm] command.
Regards,
Lars -
Computer still taking a long time to boot
I have a late 2013 21.5” iMac (Model: ME087LL/A) with a 1TB hard drive (5400 rpm). I just switch from Windows to Mac, so I tried to keep everything as simple as possible on the transfer of files. I had only added Kaspersky Antivirus and Western Digital Tools.
Boot times and operation seemed normal so I transferred my music, pictures, and some files. My computer started running slow with just one user and started taking a long time to boot. I found that since I added about 24,000 pictures to iPhoto, the Mac was trying to send all these pictures to iCloud in the background. I stopped using iCloud for iPhoto and that seemed to speed up the normal operation once the computer is booted.
The computer still seemed to take a very long time to boot. It would now take 3 minutes to get from turning it on to being able to use Safari. I uninstalled Kaspersky Antivirus and Western Digital Tools using each company’s uninstallers so I know they are completely off the computer.
Any ideas on how to get back to the fast boot time? I am only using about 150 GBs of the 1 T drive so I don’t think that is causing the issue. What should I expect for a boot time on a brand new Late 2013 iMac? Or should I try to re-install Maverick and try to get a fresh start?
Any advice would be appreciated so I don’t feel like I made the wrong choice going to Mac. I'm kicking myself because the computer was so fast when I just got it.Seventy one thanks for trying to help me out. I really appreciate it. Log is below. You are absolutely right. Kaspersky and WD look like they still have something (as well as google??). Is there anything else that stands out? How would I go about getting rid of them? Re-Install? Clean Re-Install?
EtreCheck version: 1.9.12 (48)
Report generated June 16, 2014 at 6:19:51 PM EDT
Hardware Information:
iMac (21.5-inch, Late 2013) (Verified)
iMac - model: iMac14,3
1 2.9 GHz Intel Core i5 CPU: 4 cores
8 GB RAM
Video Information:
NVIDIA GeForce GT 750M - VRAM: 1024 MB
iMac 1920 x 1080
System Software:
OS X 10.9.3 (13D65) - Uptime: 0 days 0:8:41
Disk Information:
APPLE HDD HTS541010A9E662 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (847.45 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[loaded] com.kaspersky.kext.klif (3.0.3a40) Support
[loaded] com.kaspersky.nke (1.6.3a13) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.westerndigital.ErasePrivilegedHelper.plist Support
User Launch Agents:
[loaded] com.google.keystone.agent.plist Support
User Login Items:
None
Internet Plug-ins:
SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.125 - SDK 10.6 Support
Flash Player: Version: 14.0.0.125 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 930.71 GB Disk used: 141.47 GB
Destinations:
Mac Backup [Local] (Last used)
Total size: 2
Total number of backups: 5
Oldest backup: 2014-06-08 00:03:53 +0000
Last backup: 2014-06-16 03:07:06 +0000
Size of backup disk: Adequate
Backup size 2 > (Disk used 141.47 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
2% WindowServer
1% fontd
0% hidd
0% dpd
Top Processes by Memory:
98 MB Finder
74 MB WindowServer
66 MB ocspd
66 MB mds_stores
66 MB Dock
Virtual Memory Information:
5.37 GB Free RAM
1.69 GB Active RAM
233 MB Inactive RAM
731 MB Wired RAM
233 MB Page-ins
0 B Page-outs -
Using Table.Join formula takes extremly long time to get results.(Why Query Folding doesn't work?)
Hi,
I built a query with 4 tables inside (load from Oracle DB and two of them are quite big, more than millions of rows). After filtering, I tried to build relationships between tables using Table.Join formula. However, the process took extremly long time to
bring out results (I ended the process after 15 mins' processing). There's a status bar kept updating while the query was processing, which is showed as . I suppose
this is because the query folding didn't working, so PQ had to load all the data to local memory first then do the opertion, instead of doing all the work on the source system side. Am I right? If yes, is there any ways to solve this issue?
Thanks.
Regards,
QilongHi Curt,
Here's the query that I'm refering,
let
Source = Oracle.Database("reporting"),
AOLOT_HISTS = Source{[Schema="GEN",Item="MVIEW$_AOLOT_HISTS"]}[Data],
WORK_WEEK = Source{[Schema="GEN",Item="WORK_WEEK"]}[Data],
DEVICES = Source{[Schema="GEN",Item="MVIEW$_DEVICES"]}[Data],
AO_LOTS = Source{[Schema="GEN",Item="MVIEW$_AO_LOTS"]}[Data],
Filter_WorkWeek = Table.SelectRows(WORK_WEEK, each ([WRWK_YEAR] = 2015) and (([WORK_WEEK] = 1) or ([WORK_WEEK] = 2) or ([WORK_WEEK] = 3))),
Filter_AlotHists = Table.SelectRows(AOLOT_HISTS, each ([STEP_NAME] = "BAKE" or [STEP_NAME] = "COLD TEST-IFLEX" or [STEP_NAME] = "COLD TEST-MFLEX") and ([OUT_QUANTITY] <> 0)),
#"Added Custom" = Table.AddColumn(Filter_AlotHists, "Custom", each Table.SelectRows(Filter_WorkWeek, (table2Row) => [PROCESS_END_TIME] >= table2Row[WRWK_START_DATE] and [PROCESS_END_TIME] <= table2Row[WRWK_END_DATE])),
#"Expand Custom" = Table.ExpandTableColumn(#"Added Custom", "Custom", {"WRWK_YEAR", "WORK_WEEK", "WRWK_START_DATE", "WRWK_END_DATE"}, {"WRWK_YEAR", "WORK_WEEK",
"WRWK_START_DATE", "WRWK_END_DATE"}),
Filter_AolotHists_byWeek = Table.SelectRows(#"Expand Custom", each ([WORK_WEEK] <> null)),
SelectColumns_AolotHists = Table.SelectColumns(Filter_AolotHists_byWeek,{"ALOT_NUMBER", "STEP_NAME", "PROCESS_START_TIME", "PROCESS_END_TIME", "START_QUANTITY", "OUT_QUANTITY", "REJECT_QUANTITY",
"WRWK_FISCAL_YEAR", "WRWK_WORK_WEEK_NO"}),
Filter_Devices= Table.SelectRows(DEVICES, each ([DEPARTMENT] = "TEST1")),
SelectColumns_Devices = Table.SelectColumns(Filter_Devices,{"DEVC_NUMBER", "PCKG_CODE"}),
Filter_AoLots = Table.SelectRows(AO_LOTS, each Text.Contains([DEVC_NUMBER], "MC09XS3400AFK") or Text.Contains([DEVC_NUMBER], "MC09XS3400AFKR2") or Text.Contains([DEVC_NUMBER], "MC10XS3412CHFK") or Text.Contains([DEVC_NUMBER],
"MC10XS3412CHFKR2")),
SelectColumns_AoLots = Table.SelectColumns(Filter_AoLots,{"ALOT_NUMBER", "DEVC_NUMBER", "TRACECODE", "WAFERLOTNUMBER"}),
TableJoin = Table.Join(SelectColumns_AolotHists, "ALOT_NUMBER", Table.PrefixColumns(SelectColumns_AoLots, "AoLots"), "AoLots.ALOT_NUMBER"),
TableJoin1 = Table.Join(TableJoin, "AoLots.DEVC_NUMBER", Table.PrefixColumns(SelectColumns_Devices, "Devices"), "Devices.DEVC_NUMBER")
in
TableJoin1
Could you please give me some hints why it needs so long to process?
Thanks. -
Why outlook2011 mac version* takes long time to boot with OSX
why outlook2011 mac version* takes long time to boot with OSX
Okay, so after doing all of the above, the computer still takes between 40 seconds and 1 minute or so to boot up, and the VersionCue messages still appear. However I discovered that the "kdcmond cannot retrieve..." messages disappeared after I disabled my ethernet connections. So at least I know that that had nothing to do with the extended boot-up time.
I have heard that the more RAM you have, the longer it takes to boot due to the RAM count. Since I have 10 GB, maybe this is why?
I've included the most recent Console messages below:
22/4/08 9:56:16 AM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
22/4/08 9:56:16 AM com.apple.launchd[1] (com.adobe.versioncueCS3) Unknown key: ServiceDescription
22/4/08 9:56:16 AM com.apple.launchd[1] (org.cups.cups-lpd) Unknown key: SHAuthorizationRight
22/4/08 9:56:16 AM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
22/4/08 9:56:16 AM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
22/4/08 9:56:39 AM com.apple.SystemStarter[28] Starting Aladdin USB daemon
22/4/08 9:56:39 AM org.ntp.ntpd[25] Error : nodename nor servname provided, or not known
22/4/08 9:56:39 AM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[74]) Exited: Terminated
22/4/08 9:56:39 AM com.apple.launchctl.Aqua[90] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/com.adobe.versioncueCS3.monitor.plist
22/4/08 9:56:42 AM com.apple.launchd[82] (0x1011e0.VersionCueCS3monitor) Failed to check-in! -
[SOLVED] pacman -Syu took an extremely long time today
Hey,
this is the first time I've encountered such an issue:
today I upgraded as usual (pacman -Syu) but the process took an extremely long time
(~20 minutes). The last time I upgraded was three days ago.
The culprits seem to have been the libreoffice-still and texlive packages.
Has anyone else had this problem? What could have caused this?
Last edited by Aton (2014-08-31 09:40:25)hoschi wrote:Note to myself: Texlive is huge, really huge.
Unless you've installed https://www.archlinux.org/groups/any/texlive-lang/ and https://www.archlinux.org/packages/extr … ontsextra/ too, texlive is not that big. -
MBP Taking a long time to boot up
Recently, My MBP started taking a long time to boot up starting at the Mac OS X boot screen and since it is set on auto login through the whole longin process(briging up the dock and finder windows) i've tried safe booting but it didnt make much of a difference what should I do?
Try creating a new user account and see if the boot/login process takes the same time with the new account.
-
MacBook Air 13" is taking a very long time to boot up
My daughter purchased a MacBook Air 13" last 1.7 GH Intel Core i5, 4GB Memory. A couple of weeks ago, my daughter noticed that her computer was taking a long time to boot up. Apparently the bootup time has progressively lengthened to 3 - 5 minutes to get to her desktop. What happens is the boot-up process seems to stall on a grey screen and beach-balls until the desktop eventually appears. Does anyone have any idea of what could be causing this issue? Any tips, tricks, suggestion would be helpful.
Thanks!!I would consider doing the following:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
I updated my ipad to 7.1 this weekend. I am using the same wireless network, etc.....nothing else has changed but it takes an extremely long time to load itunes on the ipad. Everything from the store itself and the items I have purchased take anything rom 3 to 5 minutes to load.
I have reset the ipad, reset the "network" from the router to the option on the ipad.
Any other suggestions?Check App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the country/region where you are located.
9. Tap "Done".
Note: If the change doesn't take effect, sign out of account and sign in again. -
Revision: 14143
Revision: 14143
Author: [email protected]
Date: 2010-02-12 05:30:48 -0800 (Fri, 12 Feb 2010)
Log Message:
Should have happened long time ago but deprecated idle-timeout-minutes in Servlet-based streaming channels and introduced connection-idle-timeout-minutes. This way both Servlet-based and NIO-based channels have consistent timeout config.
QA: No - I already tested.
Doc: Yes - If we have references to idle-timeout-minutes in the doc, should be changed to connection-idle-timeout-minutes.
Checkintests: Pass
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseStreamingHTTPEndpoint.java
blazeds/trunk/resources/config/services-config.xmlls -l /var/run/lighttpd/
And how are you spawning the php instances? I don't see that in the daemons array anywhere.
EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
You will note that with pre-spawned information, the config looks different[1].
You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
[1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change" -
My Airport Extreme cannot be discovered by my macbook pro. Need help.
New, out of the box, the AirPort Extreme is broadcasting a wireless signal with a name like Apple Network xxxxxx.
If you want to configure the AirPort Extreme using wireless, you must log on to this network first from your Mac.
Click the AirPort icon at the top of the screen, click Join Other Network, click Show Networks, select the Apple Network xxxxxx and log on. No password is required. Then open AirPort Utility.
Or
If you have a spare Ethernet cable handy, connect it from your Mac to one of the LAN <-> ports on the AirPort Extreme to establish a direct connection. Then open AirPort Utility. -
Applying Software Installation Policy Is Taking Long Time During Boot Process
1 of my servers is having slow boot up issue. I have enabled user environment debugging and the gpsvc.log file has been generated. I have also used the Windows Performance Analyzer to capture logs and results came back that the GP Client is taking a long
time in the boot process. So, I reckoned the slow boot is due to GPO but I am not sure where to look from this log file.
I have only paste part of the gpsvc.log file here due to limitation in the number of characters allowed to be posted. Would appreciate some good advise on this issue that I am facing.
GPSVC(34c.408) 04:03:30:109 ReadExtStatus: Reading Previous Status for extension {FB2CA36D-0B40-4307-821B-A13B252DE56C}
GPSVC(34c.408) 04:03:30:109 ReadExtStatus: Reading Previous Status for extension {fbf687e6-f063-4d9f-9f4f-fd9a26acdd5f}
GPSVC(34c.408) 04:03:30:109 GetMachineToken: Looping for authentication again.
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: Logging Data for Target <SW01E772>.
GPSVC(34c.408) 04:03:30:109 GPLockPolicySection: Sid = (null), dwTimeout= 30000, dwFlags= 0
GPSVC(34c.408) 04:03:30:109 LockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:109 Sync Lock Called
GPSVC(34c.408) 04:03:30:109 Writer Lock got immediately.
GPSVC(34c.408) 04:03:30:109 Lock taken successfully
GPSVC(34c.408) 04:03:30:109 UnLockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:109 UnLockedsuccessfully
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: OpenThreadTokenfailed with error 1008, assuming thread is not impersonating
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: Processing extension Registry
GPSVC(34c.408) 04:03:30:125 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes and nosecurity group membership change and extension Registry has NoGPOChangesset.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Wireless Group Policy
GPSVC(34c.408) 04:03:30:125CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes but couldn't read extension Wireless Group Policy's status or policy time.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Extension Wireless Group Policy skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Group Policy Environment
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes but couldn't read extension Group Policy Environment's status or policy time.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Extension Group Policy Environment skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Group Policy Local Users and Groups
GPSVC(34c.408) 04:03:30:125 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:156 GPLockPolicySection: Sid = (null), dwTimeout= 30000, dwFlags= 0
GPSVC(34c.408) 04:03:30:156 LockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:156 Sync Lock Called
GPSVC(34c.408)04:03:30:156 Writer Lock got immediately.
GPSVC(34c.408) 04:03:30:156 Lock taken successfully
GPSVC(34c.408) 04:03:30:156 ProcessGPOList: Entering for extension Group Policy Local Users and Groups
GPSVC(34c.408) 04:03:30:156 MachinePolicyCallback: Settingstatus UI to Applying Group Policy Local Users and Groups policy...
GPSVC(34c.408) 04:03:30:156 ProcessGPOList: No changes. CSEwill not be passed in the IwbemServicesintfptr
GPSVC(34c.364)04:03:30:156 Message Status = <Applying Group Policy Local Users and Groups policy...>
GPSVC(34c.364) 04:03:30:156 Setting GPsessionstate = 1
GPSVC(34c.408) 04:03:31:796 ProcessGroupPolicyCompletedExInternal: Entering. Extension = {17D89FEC-5C44-4972-B12D-241CAEF74509}, dwStatus= 0x0
GPSVC(34c.408) 04:03:31:953 GetWbemServices: CoCreateInstancesucceeded
GPSVC(34c.408) 04:03:36:031 ConnectToNameSpace: ConnectServerreturned 0x0
GPSVC(34c.408) 04:03:36:140 ProcessGroupPolicyCompletedExInternal: Extension {17D89FEC-5C44-4972-B12D-241CAEF74509} was able to log data. Error = 0x0, dwRet= 0. Clearing the dirty bit
GPSVC(34c.408) 04:03:36:500 ProcessGroupPolicyCompletedExInternal: Finished processing extension <Group Policy Local Users and Groups> at 44203 ticks (ms)
GPSVC(34c.408) 04:03:36:500 ProcessGroupPolicyCompletedExInternal: Leaving. Extension = {17D89FEC-5C44-4972-B12D-241CAEF74509}, Return status dwRet= 0x0
GPSVC(34c.408) 04:03:36:500 ProcessGPOList: Extension Group Policy Local Users and Groups returned 0x0.
GPSVC(34c.408) 04:03:36:500 ProcessGPOList: Extension Group Policy Local Users and Groups status was not updated because there was no changes and no transition or rsopwasn't enabled
GPSVC(34c.408) 04:03:36:500 UnLockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:36:500 UnLockedsuccessfully
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Group Policy Device Settings
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Group Policy Device Settings'sstatus or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Group Policy Device Settings skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Folder Redirection
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Folder Redirection's status or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Folder Redirection skipped with flags 0x7.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Microsoft Disk Quota
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Microsoft Disk Quota's status or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Microsoft Disk Quota skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Group Policy Network Options
GPSVC(34c.408) 04:03:36:531CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension Group Policy Network Options'sstatus or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension Group Policy Network Options skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension QoSPacket Scheduler
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension QoSPacket Scheduler's status or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension QoSPacket Scheduler skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Scripts
GPSVC(34c.408) 04:03:36:546 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes and no security group membership change and extension Scripts has NoGPOChangesset.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Remote Desktop USB Redirection
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension Remote Desktop USB Redirection's status or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension Remote Desktop USB Redirection skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Internet Explorer Zonemapping
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Zonemapping'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Internet Explorer Zonemappingskipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Drive Maps
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Drive Maps'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Drive Maps skipped withflags 0x7.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processingextension Group Policy Folders
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Folders'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Folders skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Network Shares
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Network Shares's status or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Network Shares skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Files
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't readextension Group Policy Files's status or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Files skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Data Sources
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs:No GPO changes but couldn't read extension Group Policy Data Sources's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Group Policy Data Sources skipped because bothdeleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Group Policy Ini Files
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't read extension Group Policy Ini Files's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension GroupPolicy Ini Files skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Internet Explorer User Accelerators
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't readextension Internet Explorer User Accelerators's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Internet Explorer User Accelerators skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Security
GPSVC(34c.408) 04:03:36:578ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes and no security group membership change and extension Security has NoGPOChanges set.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Deployed Printer Connections
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't read extension Deployed Printer Connections's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Deployed Printer Connections skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Services
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Services's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Services skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Internet Explorer Branding
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Branding's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Internet Explorer Branding skipped with flags 0x7.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group PolicyFolder Options
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Folder Options's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Folder Options skipped because bothdeleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Scheduled Tasks
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Scheduled Tasks's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Scheduled Tasks skipped because both deletedand changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Registry
GPSVC(34c.408) 04:03:36:593 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:625 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 0
GPSVC(34c.408)04:03:36:625 LockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:625 Sync Lock Called
GPSVC(34c.408) 04:03:36:625 Writer Lock got immediately.
GPSVC(34c.408) 04:03:36:625 Locktaken successfully
GPSVC(34c.408) 04:03:36:625 ProcessGPOList: Entering for extension Group Policy Registry
GPSVC(34c.408) 04:03:36:625 MachinePolicyCallback: Setting status UI to Applying Group Policy Registry policy...
GPSVC(34c.408) 04:03:36:625 ProcessGPOList: No changes. CSE will not be passed in the IwbemServices intf ptr
GPSVC(34c.364) 04:03:36:625 Setting GPsession state =1
GPSVC(34c.408) 04:03:36:765 ProcessGroupPolicyCompletedExInternal: Entering. Extension = {B087BE9D-ED37-454F-AF9C-04291E351182}, dwStatus = 0x0
GPSVC(34c.408) 04:03:36:796 GetWbemServices: CoCreateInstance succeeded
GPSVC(34c.408) 04:03:36:812 ConnectToNameSpace: ConnectServer returned 0x0
GPSVC(34c.408) 04:03:36:812 ProcessGroupPolicyCompletedExInternal: Extension {B087BE9D-ED37-454F-AF9C-04291E351182} was able to log data. Error = 0x0, dwRet = 0. Clearing the dirty bit
GPSVC(34c.408) 04:03:36:843 ProcessGroupPolicyCompletedExInternal: Finished processing extension <Group Policy Registry> at 44546 ticks (ms)
GPSVC(34c.408) 04:03:36:843 ProcessGroupPolicyCompletedExInternal: Leaving. Extension = {B087BE9D-ED37-454F-AF9C-04291E351182}, Return status dwRet = 0x0
GPSVC(34c.408) 04:03:36:843 ProcessGPOList: Extension Group Policy Registry returned 0x0.
GPSVC(34c.408) 04:03:36:843 ProcessGPOList: Extension Group Policy Registry status was not updated because there was no changes and no transition or rsop wasn'tenabled
GPSVC(34c.408) 04:03:36:843 UnLockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:843 UnLocked successfully
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension 802.3 Group Policy
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension 802.3 Group Policy's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension 802.3 Group Policy skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension Group Policy Printers
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension Group Policy Printers's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension Group Policy Printers skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension Group Policy Shortcuts
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension Group Policy Shortcuts's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension Group Policy Shortcuts skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:890 ProcessGPOs: Processing extension Software Installation
GPSVC(34c.408) 04:03:36:890 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:890 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:890 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 0
GPSVC(34c.408) 04:03:36:890 LockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:890 Sync Lock Called
GPSVC(34c.408) 04:03:36:890 Writer Lock got immediately.
GPSVC(34c.408) 04:03:36:890 Lock taken successfully
GPSVC(34c.408) 04:03:36:890 ProcessGPOList: Entering for extension Software Installation
GPSVC(34c.408) 04:03:36:890 MachinePolicyCallback: Setting status UI to Applying Software Installation policy...
GPSVC(34c.408) 04:03:36:890ProcessGPOList: No changes. CSE will not be passed in the IwbemServices intf ptr
GPSVC(34c.364) 04:03:36:890 Message Status = <Applying Software Installation policy...>
GPSVC(34c.364) 04:03:36:890 Setting GPsession state = 1
GPSVC(34c.408) 04:03:37:312 ProcessGPOList: Extension Software Installation returned 0x0.
GPSVC(34c.408) 04:03:37:312 ProcessGPOList: Extension Software Installation status was not updated because there was no changes and no transition or rsop wasn't enabled
GPSVC(34c.408) 04:03:37:312UnLockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:37:312 UnLocked successfully
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension TCPIP
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension TCPIP's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension TCPIP skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension Internet Explorer Machine Accelerators
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Machine Accelerators's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension Internet Explorer Machine Accelerators skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension IP Security
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension IP Security's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension IP Security skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension Group Policy Internet Settings
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Internet Settings's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Internet Settings skipped with flags 0x7.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Start Menu Settings
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Start Menu Settings's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Start Menu Settings skipped because both deleted and changed GPO listsare empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processingextension Group Policy Regional Options
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extensionGroup Policy Regional Options's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy RegionalOptions skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Power Options
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Power Options's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Power Options skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Audit Policy Configuration
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Audit Policy Configuration's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Audit Policy Configuration skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Applications
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension Group Policy Applications's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension Group Policy Applications skipped with flags 0x7.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Processing extension Enterprise QoS
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension Enterprise QoS's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension Enterprise QoS skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Processing extensionCP
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension CP's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension CP skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:359 gpGetFgPolicyRefreshInfo: Mode: 1, Reason: 7
GPSVC(34c.408) 04:03:37:359 SetFgRefreshInfo: Previous Machine Fg policy Synchronous, Reason: SKU.
GPSVC(34c.408) 04:03:37:359 SetFgRefreshInfo: Next Machine Fg policy Synchronous, Reason: SKU.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: No WMI logging done in this policy cycle.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Boot/Logon Policy processing - checking if UBPM trigger events need to be fired
GPSVC(34c.408) 04:03:37:375 CheckAndFireGPTriggerEvent: FiredPolicy present UBPM trigger event for Machine.
GPSVC(34c.408) 04:03:37:375 Application complete with bConnectivityFailure = 0.
GPSVC(34c.79c) 04:03:40:546 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xc8c
GPSVC(34c.79c) 04:03:40:546 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3a0) 04:03:40:546 Target = Machine
GPSVC(34c.79c) 04:03:40:546 Client_RegisterForNotification: User =machine, changenumber = 0
GPSVC(34c.79c) 04:03:40:546 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(3bc.ac8) 04:03:59:296 CGPNotify::RegisterForNotification: Entering withtarget Machine and event 0x1ac
GPSVC(3bc.ac8) 04:03:59:296 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.748) 04:03:59:296 Target = Machine
GPSVC(3bc.ac8) 04:03:59:296 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(3bc.ac8) 04:03:59:296 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.748) 04:03:59:343 Target = Machine
GPSVC(34c.748) 04:03:59:343 Target = Machine,ChangeNumber 0
GPSVC(34c.3ac) 04:03:59:515 Target = Machine
GPSVC(34c.3ac) 04:03:59:531 Target = Machine, ChangeNumber 0
GPSVC(34c.3ac) 04:03:59:531 Sid = (null), dwTimeout = 600000, dwFlags = 268435456
GPSVC(34c.3ac) 04:03:59:531 LockPolicySection calledfor user <Machine>
GPSVC(34c.3ac) 04:03:59:546 Async Lock called
GPSVC(34c.3ac) 04:03:59:546 Reader Lock got immediately. m_cReadersInLock : 1
GPSVC(34c.3ac) 04:03:59:546 Sid = (null)
GPSVC(34c.3ac) 04:03:59:546 UnLockPolicySection called for user <Machine>
GPSVC(34c.3ac) 04:03:59:546 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(34c.3ac) 04:03:59:546 Settinglock state as notLocked
GPSVC(34c.3ac) 04:03:59:546 UnLocked successfully
GPSVC(34c.bdc) 04:04:00:000 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xd04
GPSVC(34c.bdc) 04:04:00:000 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:04:00:000 Target =Machine
GPSVC(34c.bdc) 04:04:00:000 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.bdc) 04:04:00:000 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.3ac) 04:04:00:000 Target = Machine, ChangeNumber 0
GPSVC(34c.748) 04:04:01:140 Target = Machine
GPSVC(34c.748) 04:04:01:140 Target = Machine, ChangeNumber 0
GPSVC(154.41c) 04:05:25:509CGPNotify::RegisterForNotification: Entering with target Machine and event 0x458
GPSVC(154.41c) 04:05:25:509 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:509 Target = Machine
GPSVC(154.41c) 04:05:25:525 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:525 Target = Machine, ChangeNumber 0
GPSVC(154.41c) 04:05:25:525 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(154.41c) 04:05:25:759 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x4e8
GPSVC(154.41c) 04:05:25:759 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:759 Target = Machine
GPSVC(154.41c) 04:05:25:775 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(154.41c) 04:05:25:775 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.3ac) 04:05:25:775 Target = Machine, ChangeNumber 0
GPSVC(34c.3ac) 04:05:59:217 Target = Machine
GPSVC(34c.3ac)04:05:59:233 Target = Machine, ChangeNumber 0
GPSVC(3bc.3cc) 04:05:59:389 CGPNotify::UnregisterNotification: Entering with event 0x1ac
GPSVC(3bc.3cc) 04:05:59:389 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(3bc.3cc) 04:05:59:405 CGPNotify::UnregisterNotification: Canceling pending calls
GPSVC(3bc.3cc) 04:05:59:420 Client_CompleteNotificationCall: failed with 0x4c7
GPSVC(3bc.3cc) 04:05:59:420 CGPNotify::UnregisterNotification: Cancelled pending calls
GPSVC(3bc.3cc) 04:05:59:420 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
GPSVC(34c.360) 04:06:00:827 Target = Machine
GPSVC(34c.360) 04:06:00:827 Target = Machine, ChangeNumber 0
GPSVC(34c.360) 04:06:01:155 Target = Machine
GPSVC(34c.360) 04:06:01:171 Target = Machine, ChangeNumber 0
GPSVC(34c.fe8) 04:06:02:124 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x218
GPSVC(34c.fe8) 04:06:02:140 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.360) 04:06:02:155 Target = Machine
GPSVC(34c.fe8) 04:06:02:155 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.fe8) 04:06:02:171 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.da4) 05:06:16:856 Target = Machine
GPSVC(34c.da4) 05:06:16:856 Target = Machine, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:856 Target = S-1-5-20
GPSVC(34c.da4) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:856 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:16:856 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:856 Target = S-1-5-20
GPSVC(34c.de8) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:872 Callerrequesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:872 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.de8) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:872 Caller requesting for usernotification/lock is from session 0
GPSVC(34c.da4) 05:06:16:872Target = S-1-5-20
GPSVC(34c.da4) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:872 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:16:872 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:872 Caller requesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:887 Target = S-1-5-20
GPSVC(34c.de8) 05:06:16:887 Could notfind user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:887 Caller requesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:887 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.de8) 05:06:16:887 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:887 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:26:981 Setting GPsession state = 1
GPSVC(34c.de8) 05:06:32:341 SID = S-1-5-21-206128196-3657029889-627342018-7757
GPSVC(34c.de8) 05:06:32:356 bMachine = 0
GPSVC(34c.de8) 05:06:32:356 Setting GPsession state = 1
GPSVC(34c.de8) 05:06:32:356 Message Status = <Applying user settings...>
GPSVC(34c.778) 05:06:32:356 StartTime For network wait: 32140ms
GPSVC(34c.778) 05:06:32:356 Current Time: 3819953ms
GPSVC(34c.de8) 05:06:32:356 Setting GPsession state = 1
GPSVC(34c.778) 05:06:32:356 MaxTimeToWaitForNetwork: 5212ms
GPSVC(34c.778) 05:06:32:356 TimeRemainingToWaitForNetwork: 0ms
GPSVC(34c.778) 05:06:32:356 UserPolicy: Waiting for machine policy wait for network event with timeout 0 ms
GPSVC(34c.778) 05:06:32:388 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 65538
GPSVC(34c.778) 05:06:32:388 LockPolicySection called for user <Machine>Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support
Maybe you are looking for
-
I have multiple copies of phantom books in ibooks on my ipad. By phantom I mean, that they appear to be partially downloaded. They will not resume downloading or allow deletion. None of these books are on my mac, they have been deleted. These are boo
-
Using Runtime.exec( "regedit") does not prompt Vista to display UAC dialog
When I run the following code in Vista (with User Access Control turned on) from within my IDE (IntelliJ 5.x) under Java 1.5.0_11: Runtime.getRuntime().exec( "regedit ..." ) Vista appropriately displays the UAC confirmation box to verify that it is o
-
HZ_CUST_ACCOUNT_SITE_V2PUB.update_cust_site_use fails with no customer
Hoping someone can help me here. I'm using theHZ_CUST_ACCOUNT_SITE_V2PUB.get_cust_site_use_rec to successfully retrieve a cust_site_use record from the database. I then update one column and use HZ_CUST_ACCOUNT_SITE_V2PUB.update_cust_site_use to try
-
Open and write to multiple files in labview 6i
I want to open multiple files in a single application in labview and write the data I retrive via gpib in the files
-
hi . why was this message whate to software upate - err - none of the selected updates could be installed ? Why was this error message or you don't have permission ?