Extremely Slow Browsing

I just got my tour last week.  I am with verizon wireless, and so far the phone is great, but I am having some big problems that make me want to smash it on a wall.
My biggest annoyance with this thing is that webpages, even mobile webpages literally take 10 minutes to load, if the ever do.  I compared it's speed to my dad's storm 2 when it came to loading, and his was able to load a page in a split second, while mine, which was sitting next to his, could not load the page. 
Second, apps like facebook also take forever to load comments and streams, sometimes it cannot load them.
In addition to this, sometimes when I go to until or lock the phone, I get the clock ticking thing for over a minute.
Is this normal?  Or should I go back and get another one or upgrade to a storm 2?

Make sure you have the Latest OS version from your Provider ( I think it is 4.7.1.61 for VZ)
Make sure you are not leaving a tone of Applications open in the Background, especially apps that use an active Data Conenction, or GPS to update (had a horrible problem with a Location based app that tracked my location and updated itself all the time, Would Slow my phone to a crawl, turned off the automatic update feature to only when i have the application in the foreground and the issue went away)
hope that helps
Also try a different Browser
I use Bolt, a lot faster than the default browser.
Brownie
Tour 9630
IT Professional

Similar Messages

  • Slow Browsing!

    I've been experiencing extremely slow browsing lately and have no idea why. I've read ALL the other posts concerning this and they don't seem to apply because I don't think it's strictly a Safari issue. I've tried Firefox and IE and get the same problems on certain pages that seem to just pop up very, very quickly on my PC, which is annoying becaues I hate PCs and my MAC is (supossedly ) a lot faster. I've emptied the cache, reset the history, trashed the icons, repaired permissions, etc.
    What do I do now?
    Thanks!

    I'm not sure how to find that, when searching google I found http://tools.pingdom.com/ping/ and the results from that told me
    Hops: 14
    Max resp. time: 184 ms
    Average resp. time: 70 ms
    Is this what you are looking for?

  • I recently cleared my hardrive and reloaded the install software including snow leopard and now the browser is extremely slow. Any ideas

    I recently cleared my hardrive and reloaded the install software including snow leopard and now the browser is extremely slow. Any ideas

    Your profile says OS 10.5.8, Snow Leopard is 10.6.
    After installing Snow Leopard, did you do a software update? Apple menu / Software update ..
    If you have not run it yet, do so. It will give you the highest versions of Snow Leopard and Safari. That might help.

  • Extremely slow download speeds and internet browsing on Macbook pro

    I recently got a 13"" macbook pro. System config - Maverick OS/i7 dual core/8GB RAM/750 GB HDD, Almost 690GB of free space available. I am expriencing extremely slow download and internet browsing speed. I have to wait for almost 10-12 seconds for normal sites to download. The app updates and downloads are painstakingly slow.
    The internet speeds are working perfectly fine on my Windows Laptop, and even on my mobile phones. So, the there's no issue of network. Also, I have cleared safari cache etc, just to be sure. But nothing's really helping.
    Can any one help me here.
    Thanks !
    Chetan

    Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
    Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If the answer is no, do that now and see whether there's any change.
    Quit and relaunch the browser. Any change?
    Log out and log back in. Any change?
    Enable Private Browsing in the Safari menu. Any change?
    Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
    If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
    If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
    Again, if only Safari is involved, open the iCloud preference pane and uncheck the box marked Safari, if it's checked. Any change?
    Are there any other devices on the same network that can browse the Web, and are they affected?
    If you can test Safari on another network, is it the same there?
    If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

  • I use MacBook Air. Firefox 4 is extremely slow with java apps, is it going to be fixed or should I give up this browser ?

    After installinf current version of Firefox I can hardly use it with web pages that heavily use java, like chats on www.polchat.pl. Previous version worked similar to Safari or IE. Newest is extremely slow. Is it goimg to be fixed ?

    After installinf current version of Firefox I can hardly use it with web pages that heavily use java, like chats on www.polchat.pl. Previous version worked similar to Safari or IE. Newest is extremely slow. Is it goimg to be fixed ?

  • My macbook pro (late 2011) is extreme slow, freezing, crashing and lagging too often.

    I am new to the forum, I hope this is the good topic to post my problem.
    I have a late 2011 Macbook Pro, and it is getting slower and slower. The performance was bad with Mavericks as well, but now, with Yosemite installed, it is much more worse. I have never reinstalled my system (only upgraded the osx), so it is an almost 3 years old setup. In that time I have installed a lot of applications, and also deleted a lot. About a year ago I upgraded the RAM, but didn't help too much. Now with Yosemite my startup time is more than 5 minutes, and sometimes the startup freezes (and I have to push the power button long to retry). Safari with 5-10 tabs is extreme slow, and lagging when I switch tabs or open new ones. To launch a new app, for example skype, i have to wait 1-2 minutes. Everything is slow. Sometimes my finder crashes, and works only if I restart the macbook. Another example: if I open the downloads folder in Finder, I have the spinning loading icon for about 20-30 seconds, and just after this time can I see the content of the folder.
    My console is full of errors, I get new records in every single seconds. I repaired the disk permissions, deleted safari cache, history, etc. but nothing helped.
    Many people here attached an "etrecheck" record for their threads, I downloaded the app, and made one scan, you can see my results here, I hope someone with more technical skills can help me!
    Thank you in advance!
    (and sorry for my english - it is not my mother language)
    EtreCheck version: 2.1.2 (105)
    Report generated 2014. december 11. 12:59:29 CET
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.4 GHz Intel Core i5 CPU: 2-core
      10 GB RAM Upgradeable
      BANK 0/DIMM0
      8 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 512 MB
      Color LCD 1280 x 800
      SyncMaster 1680 x 1050 @ 60 Hz
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:55:58
    Disk Information: ℹ️
      TOSHIBA MK5065GSXF disk0 : (500,11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) / : 498.88 GB (130.97 GB free)
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Computer, Inc. IR Receiver
      Apple Inc. FaceTime HD Camera (Built-in)
      StoreJet Transcend StoreJet Transcend 2 TB
      S.M.A.R.T. Status: Verified
      EFI (disk2s1) <not mounted> : 210 MB
      Transcend 2TB (disk2s2) /Volumes/Transcend 2TB : 2.00 TB (1.91 TB free)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
      /etc/hosts - Count: 67
    Gatekeeper: ℹ️
      Anywhere
    Kernel Extensions: ℹ️
      /Applications/KeyRemap4MacBook.app
      [loaded] org.pqrs.driver.KeyRemap4MacBook (9.3.0 - SDK 10.9) [Support]
      /Applications/PMHMac.app
      [not loaded] com.sony.driver.dsccamFirmwareUpdaterType00 (1 - SDK 10.5) [Support]
      /Applications/Parallels Desktop.app
      [not loaded] com.parallels.kext.hidhook (8.0 18494.886912) [Support]
      [not loaded] com.parallels.kext.hypervisor (8.0 18494.886912) [Support]
      [not loaded] com.parallels.kext.netbridge (8.0 18494.886912) [Support]
      [not loaded] com.parallels.kext.usbconnect (8.0 18494.886912) [Support]
      [not loaded] com.parallels.kext.vnic (8.0 18494.886912) [Support]
      /Applications/Toast 11 Titanium/Spin Doctor.app
      [not loaded] com.hzsystems.terminus.driver (4) [Support]
      /Applications/Toast 11 Titanium/Toast Titanium.app
      [not loaded] com.roxio.BluRaySupport (1.1.6) [Support]
      /Library/Extensions
      [not loaded] com.sony.driver.dsccamDeviceInfo00 (1 - SDK 10.7) [Support]
      /Library/StartupItems/DoubleCommand
      [not loaded] com.baltaks.driver.DoubleCommand (1.7 - SDK 10.8) [Support]
      /System/Library/Extensions
      [loaded] org.dungeon.driver.SATSMARTDriver (0.8 - SDK 10.6) [Support]
      /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
      [not loaded] com.roxio.TDIXController (2.0) [Support]
    Startup Items: ℹ️
      DoubleCommand: Path: /Library/StartupItems/DoubleCommand
      Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
      [failed] com.adobe.CS4ServiceManager.plist [Support] [Details]
      [failed] com.adobe.CS5ServiceManager.plist [Support] [Details]
      [running] com.bjango.istatmenusagent.plist [Support]
      [running] com.bjango.istatmenusnotifications.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [loaded] com.oracle.java.Java-Updater.plist [Support]
      [running] com.sony.SonyAutoLauncher.agent.plist [Support]
      [loaded] org.pqrs.KeyRemap4MacBook.server.plist [Support]
      [failed] XR_3045NI_Startup_Fax.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [invalid?] com.adobe.SwitchBoard.plist [Support]
      [running] com.bjango.istatmenusdaemon.plist [Support]
      [loaded] com.bombich.ccc.plist [Support]
      [loaded] com.cocoatech.pathfinder.SMFHelper6.plist [Support]
      [loaded] com.google.keystone.daemon.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [loaded] com.oracle.java.Helper-Tool.plist [Support]
      [loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist [Support]
      [running] com.spotify.webhelper.plist [Support]
      [running] homebrew.mxcl.mysql.plist [Support]
    User Login Items: ℹ️
      Flux Alkalmazás (/Applications/Flux.app)
      iTunesHelper AlkalmazásHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      GrowlHelperApp Alkalmazás (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
      EvernoteHelper Alkalmazás (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
      Caffeine Alkalmazás (/Applications/Caffeine.app)
      Google Drive Alkalmazás (/Applications/Google Drive.app)
      Dropbox Alkalmazás (/Applications/Dropbox.app)
      DVDAuthorizeHelper Alkalmazás (/Users/[redacted]/Library/Application Support/Helper/DVDAuthorizeHelper.app)
      RescueTime UNKNOWNHidden (missing value)
      Alfred 2 UNKNOWN (missing value)
      SpeechSynthesisServer Alkalmazás (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
      Skype Alkalmazás (/Applications/Skype.app)
      uTorrent Alkalmazás (/Applications/uTorrent.app)
      Xmarks for Safari Alkalmazás (/Applications/Xmarks for Safari.app)
    Internet Plug-ins: ℹ️
      nplastpass: Version: 2.0.11 [Support]
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 2.4.4.2 [Support]
      AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
      Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Support]
      Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      NP_2020Player_IKEA: Version: 5.0.94.0 - SDK 10.6 [Support]
      AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Support]
      GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.0.0 [Support]
      ViewRightWebPlayer: Version: 3.5.0.0 [Support]
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User internet Plug-ins: ℹ️
      CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
      Google Earth Web Plug-in: Version: 7.1 [Support]
    Safari Extensions: ℹ️
      ResponsiveResize
      Save to Pocket
      Awesome Screenshot
      LastPass
      feedly
    3rd Party Preference Panes: ℹ️
      Double Command  [Support]
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
      Growl  [Support]
      Java  [Support]
      MacFUSE (Tuxera)  [Support]
      Perian  [Support]
      Xmarks for Safari  [Support]
    Time Machine: ℹ️
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 498.88 GB Disk used: 367.91 GB
      Destinations:
      Transcend 2TB [Local]
      Total size: 0 B
      Total number of backups: 0
      Oldest backup: -
      Last backup: -
      Size of backup disk: Too small
      Backup size 0 B < (Disk used 367.91 GB X 3)
    Top Processes by CPU: ℹ️
          21% WindowServer
          12% Console
          8% parentalcontrolsd
          6% backupd
          6% Activity Monitor
    Top Processes by Memory: ℹ️
      462 MB mysqld
      290 MB mds_stores
      290 MB Safari
      204 MB Finder
      183 MB WindowServer
    Virtual Memory Information: ℹ️
      2.20 GB Free RAM
      6.06 GB Active RAM
      809 MB Inactive RAM
      1.66 GB Wired RAM
      1.87 GB Page-ins
      0 B Page-outs
    Diagnostics Information: ℹ️
      Dec 11, 2014, 09:38:41 AM iMovie_2014-12-11-093841_[redacted]s-MacBook.hang
      Dec 11, 2014, 12:04:08 PM Self test - passed

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • IMac CPU3.06 GHz Intel Core 2 Duo, 8GB, Extremely slow and repeatedly "out of Memory" since migration from Mountain Lion to Mavericks

    Dear Apple Support Community.
    As mentioned by a number of users reporting the same problem, my 2009 iMac CPU3.06 GHz Intel Core 2 Duo, 8GB RAM, has become extremely slow and repeatedly "out of Memory" since it was migrated from Mountain Lion to Mavericks (OS 10.9 then OS 10.9.1).
    I have already run CleanMyMac, deleted 5GB of useless stuffs, which did not translate into any improvement. Following the advices collected in other Apple Support Community threads, I have applied EtreCheck the outcome of which is provided below.
    For information, I have also upgraded my 2011 MacBook CPU2.3 GHz Core i7, 8GB which became only a bit slower than before, sometimes freezing which it almost never did before. However, I am used to the fact that Mac get usually slower and more prompt fo freeze after upgrading to a more recent OS.
    Both my 2009 iMac and my 2011 MacBook have F-Secure installed. So the problem with the 2009 IMac is unlikly to be due to the presence of F-Secure. Interestingly, the few abnormalities found by Etrecheck were exacly identical before I ran CleanMyMac. There are two more findings (mentioned below) since I ran CleanMyMac on the 2009 iMac, which again didn't improve the problem.
    So please find below the details of the EtreCheck experience and some additional measurements made with iStat while running EtreCheck:
    Hardware Information:
    iMac (24-inch, Early 2009)
    iMac - model: iMac9,1
    1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
    8 GB RAM
    Video Information:
    ATI Radeon HD 4850 - VRAM: 512 MB
    Audio Plug-ins:
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 1.9 - SDK 10.9
    AppleAVBAudio: Version: 2.0.0 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
    System Software:
    OS X 10.9.1 (13B42) - Uptime: 0 days 2:40:57
    Disk Information:
    WDC WD1001FALS-40K1B0 disk0 : (1 TB)
    EFI (disk0s1) <not mounted>: 209.7 MB
    XooS5 HD (disk0s2) /: 999.35 GB (189.85 GB free)
    Recovery HD (disk0s3) <not mounted>: 650 MB
    OPTIARC DVD RW AD-5670S 
    USB Information:
    Apple Inc. Built-in iSight
    Canon CanoScan
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
    Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    WD My Passport 071D 800mbit - 800mbit max
    EFI (disk1s1) <not mounted>: 209.7 MB
    disk1s2 (disk1s2) <not mounted>: 2 TB
    Boot OS X (disk1s3) <not mounted>: 134.2 MB
    Thunderbolt Information:
    Kernel Extensions:
    com.f-secure.kext.fsauth          (1.0.0d1)
    Problem System Launch Daemons:
    [failed] com.apple.wdhelper.plist [REMARK: this abnormality appeared only after running CleanMyMac. It does not appear on my 2011 MacBook]
    Problem System Launch Agents:
    Launch Daemons:
    [loaded] com.adobe.fpsaud.plist
    [invalid] com.bjango.istatlocaldaemon.plist [REMARK: this abnormality pre-existed to running CleanMyMac. It appears also on my 2011 MacBook]
    [loaded] com.f-secure.fsavd.dbhelper.plist
    [loaded] com.f-secure.fsavd.plist
    [loaded] com.f-secure.fsmac.firewall.plist
    [loaded] com.f-secure.fsmac.fsupdated_guts2.plist
    [loaded] com.f-secure.fsmac.licensetool.plist
    [loaded] com.macpaw.CleanMyMac2.Agent.plist
    Launch Agents:
    [loaded] com.babylon.activation.plist
    [loaded] com.bjango.istatlocal.plist
    [loaded] com.f-secure.relauncher.plist
    [loaded] com.f-secure.trasher.plist
    User Launch Agents:
    [loaded] com.adobe.ARM.[...].plist
    [loaded] com.google.keystone.agent.plist
    [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist
    [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
    [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
    User Login Items:
    iTunesHelper
    Dropbox
    F-Secure Anti-Virus for MAC
    3rd Party Preference Panes:
    Flash Player
    Internet Plug-ins::
    FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
    Default Browser: Version: 537 - SDK 10.9
    AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6
    AdobePDFViewer: Version: 11.0.04 - SDK 10.6
    DivXBrowserPlugin: Version: 2.1
    Flash Player: Version: 11.9.900.170 - SDK 10.6
    OfficeLiveBrowserPlugin: Version: 12.2.8
    Google Earth Web Plug-in: Version: 6.1
    QuickTime Plugin: Version: 7.7.3
    iPhotoPhotocast: Version: 7.0
    User Internet Plug-ins::
    Picasa: Version: 1.0
    Bad Fonts:
    None
    Old applications:
    None
    Time Machine:
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: YES
    Volumes being backed up:
    XooS5 HD: Disk size: 930.71 GB Disk used: 753.90 GB
    Destinations:
    XooS5 TM [Local] (Last used)
    Total size: 2 
    Total number of backups: 32
    Oldest backup: 2013-09-15 01:11:39 +0000
    Last backup: 2013-12-07 12:48:45 +0000
    Size of backup disk: Too small. Backup size 2  < (Disk used 753.90 GB X 3)
    Time Machine details may not be accurate. All volumes being backed up may not be listed.
    REMARK: The above finding is unlikely to be accurate. In fact, my Time Machine is supported by a 2TB WD My Passport Studio external HD connected with a Firewire 800. As mentionned, only 754GB of the 2000GB are used.
    Top Processes by CPU:
    5%          backupd
    5%          Mail
    5%          WindowServer
    3%          Finder
    3%          Dropbox
    Top Processes by Memory:
    1.60 GB          mds_stores REMARK: this item was marked in red in the outcome of EtreCheck, so I assume there is something wrong there
    82 MB          Finder
    74 MB          Mail
    49 MB          softwareupdated
    49 MB          Dropbox
    Virtual Memory Statistics:
    97 MB          Free RAM
    1.21 GB          Active RAM
    1.19 GB          Inactive RAM
    1.21 GB          Wired RAM
    1.83 GB          Page-ins
    36 MB          Page-outs
    Please find now some additional measurements collected with iStat while running EtreCheck:
    Practically:
    The iMac can work slowly with only one software e.g. either Mail or Safari or Firefox, but still the below "out of Memory" message occurs about every 3 minutes.
    Aperture has becomre to slow to be useable
    If trying to write a mail (with Mail) while Safari or Firefox is open, then the "out of Memory" message occurs about every 20 seconds so I need to check on "Resume" several times per minute.
    Conclusions
    From the above, unless anyone in the Apple Support Community proves to be able to identify a specific problem leading to a way to find a cure, I tend to conclude that Mavericks is not suitable for computers operating with a Core 2 Duo CPU even with a 8GB of RAM.
    Unless I missed something, I did not see any warning from Apple Computer Inc. informing their customers they should refrain from upgrading Core 2 Duo Computers.
    The only solution I see so far is to downgrade from Mavericks to Mountain Lion. And the Apple Support Community would confirm that it is the only solution, I would appreciate to get your guidance on how to proceed.
    Intended action plan
    Migrate the above 2009 iMac to a 2014 Mac Mini Server operating on Mavericks to ensure that no data may be lost while downgrading to Montain Lion.
    Provided the above downgrading operation is successful, assign this 2009 iMac to partial retirement e.g. Mail, Skype, iTunes  and DVD player.
    In advance, I would like to thank the Apple Community for helping me either i) finding a cure to the problem, ii) or confirming that Mavericks cannot operate properly on Core 2 Duo computers, iii) and in such a case, guiding me on how to downgrade to Mountain Lion.
    Yours sincerely
    Core

    ... what anti-virus would you recommend using?
    Use what is already included with OS X. It already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple.
    A much better question is "how should I protect my Mac":
    Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
    Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
    Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
    Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
    Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
    Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
    Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
    Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
    Don’t install Java unless you are certain that you need it:
    Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
    Disable Java in Safari > Preferences > Security.
    Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
    Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
    Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
    Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
    If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
    Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
    The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
    OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
    Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
    If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
    Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
    Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
    Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

  • My mini Mac with a i5 processor is extremely slow to open documents and programs. Is there a solution to this??

    Anyone can asset me please. My mini Mac is a 2.3 GHZ i5 Core. 8 GB Ram 13333 MHz with OS 10.7.5.
    Pretty much since day one this computer is very..extremely slow to respond to any command. Opening documents or programs the system spin for ever.
    Any idea what could be causing this???  I was told that to many pictures slow down the system, I have only 700 pic on file

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS5ServiceManager com.adobe.fpsaud com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.Java-Updater com.oracle.java.JavaUpdateHelper ' ' 879294308 1083382502 1274181950 464843899 1233118628 3301885676 891055588 998894468 695903914 1106243579 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' '/\./p' '/\.appex\/Contents\/Info\.plist$/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • My MacPro is extremely slow after upgrading to Yosemite 10.10, even while reading my newspaper on PDF

    Problem description:
    My Mac Pro is extremely slow after upgrading to Yosemite 10.10, even while reading my newspaper on PDF
    This is my EtreCheck print
    EtreCheck version: 2.0.11 (98)
    Report generated 17. november 2014 kl. 10.49.28 CET
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2012) (Verified)
      MacBook Pro - model: MacBookPro9,2
      1 2.5 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000 -
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: one day 15:45:13
    Disk Information: ℹ️
      TOSHIBA MK5065GSXF disk0 : (500,11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 498.88 GB (290.89 GB free)
      Encrypted AES-XTS UnlockedConverting
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Extensions
      [loaded] net.telestream.driver.TelestreamAudio (1.1.1 - SDK 10.8) Support
      /System/Library/Extensions
      [not loaded] com.devguru.driver.SamsungComposite (1.4.20 - SDK 10.6) Support
      /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
      [not loaded] com.devguru.driver.SamsungACMControl (1.4.20 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungACMData (1.4.20 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungMTP (1.4.20 - SDK 10.5) Support
      [not loaded] com.devguru.driver.SamsungSerial (1.4.20 - SDK 10.6) Support
    Launch Agents: ℹ️
      [loaded] com.divx.dms.agent.plist Support
      [loaded] com.divx.update.agent.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
    Launch Daemons: ℹ️
      [failed] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [invalid?] com.torch.update.agent.plist Support
    User Launch Agents: ℹ️
      [loaded] com.genieo.completer.download.plist Support
      [loaded] com.genieo.completer.ltvbit.plist Support
      [loaded] com.genieo.completer.update.plist Support
      [loaded] com.google.keystone.agent.plist Support
    User Login Items: ℹ️
      None
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      DivX Web Player: Version: 3.2.3.1164 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
      OVSHelper: Version: 1.1 Support
      Default Browser: Version: 600 - SDK 10.10
      SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
      Unity Web Player: Version: UnityPlayer version 4.5.5f1 - SDK 10.6 Support
      Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 8 Update 25 Check version
    User Internet Plug-ins: ℹ️
      NPRoblox: Version: 1, 2, 8, 25 - SDK 10.10 Support
      Google Earth Web Plug-in: Version: 7.1 Support
    Safari Extensions: ℹ️
      Omnibar
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Java  Support
      Perian  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 498.88 GB Disk used: 207.99 GB
      Destinations:
      Elements [Local]
      Total size: 1.00 TB
      Total number of backups: 0
      Oldest backup: -
      Last backup: -
      Size of backup disk: Adequate
      Backup size 1.00 TB > (Disk used 207.99 GB X 3)
    Top Processes by CPU: ℹ️
          89% lsregister
          3% WindowServer
          1% mds
          1% sysmond
          0% mtmd
    Top Processes by Memory: ℹ️
      142 MB Preview
      125 MB com.apple.WebKit.WebContent
      125 MB Finder
      86 MB ocspd
      77 MB com.apple.WebKit.Plugin.64
    Virtual Memory Information: ℹ️
      335 MB Free RAM
      1.63 GB Active RAM
      1.32 GB Inactive RAM
      776 MB Wired RAM
      17.27 GB Page-ins
      345 MB Page-outs

    Check out this thread:  https://discussions.apple.com/thread/6466590?start=0&tstart=0.
    For many users, the Folder Action Dispatcher is the culprit that eats almost all available memory if it is enabled on ~/Library/LaunchAgents.

  • My mac is running extremely slow. More often than not when I try to click something or type something it gives me the "thinking" pointer icon.  I ran the etre check program and got this:

    Problem description:
    Mac is running extremely slow.  Get the scrolling pointer icon every time I click something.
    EtreCheck version: 2.1.8 (121)
    Report generated February 5, 2015 at 7:43:19 AM EST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 442
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 384 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: one day 9:39:51
    Disk Information: ℹ️
        Hitachi HTS545032B9A302 disk0 : (320.07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 318.84 GB (177.71 GB free) - 112 errors
                Core Storage: disk0s2 319.21 GB Online
        MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
        Apple Computer, Inc. IR Receiver
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Launch Agents: ℹ️
        [running]    com.Affinegy.InstaLANa.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    User Launch Agents: ℹ️
        [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
        [failed]    com.facebook.videochat.[redacted].plist [Click for support] [Click for details]
    User Login Items: ℹ️
        iTunesHelper    UNKNOWN Hidden (missing value)
        GrowlHelperApp    Application  (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
        Belkin Router Monitor    Application  (/Applications/Belkin/Belkin Router Monitor.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
        Silverlight: Version: 4.0.60531.0 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.7
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Growl  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 318.84 GB Disk used: 141.13 GB
        Destinations:
            Back up [Local]
            Total size: 250.06 GB
            Total number of backups: 7
            Oldest backup: 2012-08-25 14:58:25 +0000
            Last backup: 2015-02-04 23:30:59 +0000
            Size of backup disk: Too small
                Backup size 250.06 GB < (Disk used 141.13 GB X 3)
    Top Processes by CPU: ℹ️
            14%    mds
             6%    WindowServer
             0%    fontd
             0%    AppleSpell
             0%    notifyd
    Top Processes by Memory: ℹ️
        391 MB    softwareupdated
        185 MB    mds_stores
        137 MB    com.apple.WebKit.WebContent
        129 MB    Finder
        99 MB    Safari
    Virtual Memory Information: ℹ️
        244 MB    Free RAM
        1.88 GB    Active RAM
        974 MB    Inactive RAM
        1.08 GB    Wired RAM
        34.01 GB    Page-ins
        130 MB    Page-outs
    Diagnostics Information: ℹ️
        Feb 3, 2015, 09:59:28 PM    Self test - passed

    Perform SMC and NVRAM resets:
    http://support.apple.com/en-us/HT201295
    http://support.apple.com/en-us/HT204063
    The try a safe boot:
    http://support.apple.com/en-us/HT201262
    Any change?
    Ciao.

  • How can I resolve slow browsing in finder when connected to a share point on a linux box?

    Hi,
    I am having huge difficulties when browsing a share point that is on a Linux box. I am connecting to it with a Macbook Pro running Lion 10.7.5.
    Initially there was an SMB share point setup on the server which was extremely slow to browse. I then setup an AFP sharepoint thinking that would help with the issue but it hasn't made a difference at all. The issue is that files take forever to load when browsing using Finder. Moving between folders on the sharepoint takes extremely long since files are slow to load.
    There are very few options available on line to help with this and so far none of them have worked. I think the problem is with Finder and the way it indexes the files but I could be wrong.
    Please help!
    Nabeel

    Hey Brenda, this isn't 'Safari' I believe this is your Modem/Router to solve this issue please look on the bottom/side of your internet box, and find the codes. But I also believe, when starting up your modem/ Internet box when you first actually received it you had to sign up, this is the only way in order for you to receive this message. Please contact your Internet providers.
    Try Uninstalling Safari!
    Have you tried to press cancel to see if that helps?
    See if this happens on any other browser
    CorrellBest

  • MBP 5.1 I have a recent problem with airport connectivity. ethernet connection is working fine, but wifi has become extremely slow and bad functioning. signal is received, no problem with the wlan (my husband 's wifi with MBP is perfect) please help

    I have a MBP 5.1 with snow leopard 10.6.8. It has been working fine until few days ago, when it started to have different problems:
    1) airport is not working well. it is extremely slow, has difficulties in fully loading pages, looses connectivity, It is not browser related, behaves thesame in safari or firefox; it is not the router/wlan; my husband mbp wifi works fine (as it was mine...) and iphone wifi is also working fine. it sees the signal and different networks. , it is also very very slow in opening skype (after that, it is working ok) if  I connect via ethernet cable to the same router, everything works perfectly and with the correct speed.could it be a damaged airport card? a software problem/corruption? logic board? (I hope not, the computer is out of apple care now....)
    2) after a certain time (more than hours) of use, the trackpad is behaving strangly, increase sensitivity to touch, unwanted selection of folders, files and text or images in web pages when i move the cursor, the cursor jumping all over the places while writing, ecc I have the impression it starts doing that when I use heavily the CPU ( and the temperature goes up). Is this again a problem of the mother/logic board?
    I had recently serviced it since it was not booting properly, but except some permissions repaired, they did noit find anything wrong in the hard drive (which I have  now substituted with a SSD) or other hardware.
    thanks in advance for any help/suggestions
    alessandra

    I think I solved the wifi connection problem, just by switching off completely the router! sounds trivial, but in this case it worked!!!
    the funny behaviour of the trackpad/cursor still persists. any suggestion???
    thanks again

  • Macbook Pro Extremely Slow All Of A Sudden, Wiped Completely and Problem Persists

    My 2012 Macbook Pro has slowed down to nearly a crawl in just about everything I try to do, espescially with anything that utilizes the internet.  Activity Moniter initially revealed the issue to be the Kernal_Task proccess using too much memory as well as com.apple.finder. Also, Spotlight was indexing constantly until I disabled my disk from being accesed by it within the privacy tab of Spotlight Preference. The spinning beach ball of death has appeared more times in the past few days then I have ever seen in the entire year I've had my Macbook Pro.
    I literally tried everything that I could find. I've done everything from resetting the Pram and the other thing (I forgot the name but when you hold down four keys at once during start up). I've tried killing proccesses, rebooting my mac several times, closing out programs, deleting all applications, just about eveything you can think of. Safari, Google Chrome, and Firefox were all extremely slow. Attemping to verify disk permissions or repair failed because of the sheer amount of time it was taking. I let the computer sit for an entire day and it seemed to make little to no progress in repairing the disk. I even booted the computer in Safe Mode and it was stil performing poorly.
    The issue is NOT Hard Drive space on my Macbook. I know this because it was working perfectly fine and then all of sudden started behaving like this. All of these issues ultimately led to me doing something many others wouldn't, WIPING MY ENTIRE MAC AND RESTORING FROM FACTORY SETTINGS.
    The issue STILL persists although not as severe. Internet browing is bearable but nowhere near perfomring as it should. Even simple task such as opening up a new tab or switching tabs results in a spinning beach ball for about 5-10 seconds. Opening an application such as Pages or Twitter results in a spinning beach ball for 5-10 seconds before working slowly. Simply right clicking results in spinning beach ball.
    I have no idea what the issue could be at this point. I am now about to attempt to verify the disk again to see if it fixes any issues but a year old Apple product should NOT be behaving like this.
    Any advice is appreciated!
    My Specs:
      Model Name:          MacBook Pro
      Processor Name:          Intel Core i5
      Processor Speed:          2.5 GHz
      Memory:          4 GB

    Melophage,
    I've been scouring the community for help, and hoping you might be able and willing to look at my etrecheck results and share any wisdom and feedback, problem causers you see! I updated to OS Mavericks through apple updates without really realizing I was installinga  whole new system. I have been experiencing the lag issues that many others have, and have a Kernel_Task for which the CPU skyrockets at random and consistently slows things down. I've run disk repair in recovery mode, repaired permission, PRAM, a few 'basics', but have not really had success in addressing the issue (I guess because I don't really understand the issue!)
    Thanks in advance for any time and suggestions!!
    Hardware Information:
              MacBook Pro (13-inch, Mid 2010)
              MacBook Pro - model: MacBookPro7,1
              1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Video Information:
              NVIDIA GeForce 320M - VRAM: 256 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 16:40:46
    Disk Information:
              Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 319.21 GB (200.7 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-898
    USB Information:
              Apple Inc. Built-in iSight
              Apple Internal Memory Card Reader
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Computer, Inc. IR Receiver
              Apple Inc. Apple Internal Keyboard / Trackpad
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
    Startup Items:
              HP IO: Path: /Library/StartupItems/HP IO
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist 3rd-Party support link
              [loaded] com.adobe.SwitchBoard.plist 3rd-Party support link
              [loaded] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [loaded] com.oracle.java.Helper-Tool.plist 3rd-Party support link
    Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [loaded] com.adobe.CS5ServiceManager.plist 3rd-Party support link
              [loaded] com.oracle.java.Java-Updater.plist 3rd-Party support link
    User Launch Agents:
              [loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [loaded] com.adobe.ARM.[...].plist 3rd-Party support link
              [loaded] com.google.keystone.agent.plist 3rd-Party support link
    User Login Items:
              iTunesHelper
              WDQuickView
              HPEventHandler
              HP Scheduler
    Internet Plug-ins:
              MacCouponPrinter3: Version: (null)
              Google Earth Web Plug-in: Version: 6.1 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              Flip4Mac WMV Plugin: Version: 2.1.2.72 3rd-Party support link
              RealPlayer Plugin: Version: (null) 3rd-Party support link
              Silverlight: Version: 4.0.60129.0 3rd-Party support link
              FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
              DivXBrowserPlugin: Version: 1.1 3rd-Party support link
              Flash Player: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              iPhotoPhotocast: Version: 7.0 - SDK 10.8
              SharePointBrowserPlugin: Version: 14.3.8 - SDK 10.6 3rd-Party support link
              AdobePDFViewer: Version: 9.5.5 3rd-Party support link
              ContentUploaderPlugin: Version: 1.0 3rd-Party support link
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    User Internet Plug-ins:
              Move_Media_Player: Version: npmnqmp 07076003 3rd-Party support link
              fbplugin_1_0_3: Version: (null) 3rd-Party support link
    3rd Party Preference Panes:
              DivX  3rd-Party support link
              Flash Player  3rd-Party support link
              Flip4Mac WMV  3rd-Party support link
              Growl  3rd-Party support link
              Java  3rd-Party support link
              Perian  3rd-Party support link
    Bad Fonts:
              None
    Old Applications:
              /Library/Application Support/Microsoft/MERP2.0
                        Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                        Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
              Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
              /Applications/Microsoft Office 2011/Office
                        Microsoft Graph:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Database Utility:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Office Reminders:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Upload Center:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        My Day:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        SyncServicesAgent:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Open XML for Excel:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Alerts Daemon:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Database Daemon:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Chart Converter:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Clip Gallery:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
              /Applications/Microsoft Office 2011
                        Microsoft PowerPoint:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Excel:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Outlook:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Word:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        Microsoft Document Connection:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
              Microsoft Language Register:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
              /Applications/iWork '09
    Time Machine:
              Skip System Files: NO
              Mobile backups: ON
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 297.29 GB Disk used: 110.38 GB
              Destinations:
                        My Passport [Local] (Last used)
                        Total size: 464.98 GB
                        Total number of backups: 39
                        Oldest backup: 2010-02-01 20:31:56 +0000
                        Last backup: 2014-01-02 04:25:58 +0000
                        Size of backup disk: Adequate
                                  Backup size 464.98 GB > (Disk used 110.38 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   4%          WindowServer
                   3%          EtreCheck
                   1%          Activity Monitor
                   0%          sysmond
                   0%          configd
    Top Processes by Memory:
              152 MB          com.apple.IconServicesAgent
              131 MB          softwareupdated
              115 MB          Finder
              111 MB          Google Chrome
              61 MB          mds_stores
    Virtual Memory Information:
              42 MB          Free RAM
              1.65 GB          Active RAM
              1.63 GB          Inactive RAM
              440 MB          Wired RAM
              822 MB          Page-ins
              0 B          Page-outs

  • Tabs won't appear, extremely slow, does not save settings.

    For the past few months I've been experiencing a host of difficulties with Firefox. When I open a new window, the appearance is totally different from what the original window was, with the "Open a new tab" button on the left instead of the right, and the current tab that opens is not visible in the bar. When I try to change this in the settings, it just doesn't seem to take. This same problem is true for any window, secondary or otherwise. If I close everything, open a new session, change the settings to how I like them (which I have to do every time) and then close that window, nothing stays the way I set it.
    Also, the browser runs extremely slow. And when I say extreme, I mean it can take 20 minutes to open a new session. And once I start using it, it likes to periodically speed up to a normal pace for a few minutes, hours, days - it's not predictable - and then come to a crashing halt again.
    The final problem is less irritating, but equally perplexing. I have a few folders in my bookmarks toolbar that contain anywhere from 10-50 websites each, and they like to spontaneously auto-scroll to the top of the list, despite my attempts to scroll down. This problem just goes on and on until it suddenly stops for unknown reasons.
    I would really, REALLY appreciate some help clearing up these problems. Thanks!

    I see such issues my self.<br />
    It usually helps to close and restore that tab (History > Recently Closed Tabs; Cmd+Shift+T) to make the others appear.

  • Extremely slow wireless printing with HP Photosmart Premium C309g-m

    I'm seeing extremely slow print speeds when printing wirelessly from a Mac or a Windows XP system to a new HP Photosmart Premium C309g-m printer. The printer begins printing immediately when I request a print, but it only prints one line. It will then take about 15 minutes to print the rest of the page, printing each line after a very long pause. Demo page printing doesn't exhibit this problem, only documents from programs like Word 2008, Safari and Firefox (tried firefox on PC and Mac) are affected.
    If I connect to the printer through a USB connection it prints fine, so this problem appears to be with wireless printing only.
    Printer: HP Photosmart Premium C309g-m
    Computer: Mac mini (Late 2009 model) (also tried a Windows XP laptop as a comparison, using latest drivers from HP's website)
    OS: Mac OS X 10.6.2 with all available updates installed
    Computer connection method: Wired Ethernet connection to wireless router
    Printer drivers: version 2.2.1 (Apple supplied, HP drivers never installed as system shipped with 10.6)
    Wireless router: Apple TimeCapsule (Early 2009) 1TB, running in a/n and b/g modes on 2.4 and 5GHz. TimeCapsule is in bridging mode as the DSL modem handles DHCP service
    Encryption: WPA2 Personal, no MAC filtering or hiding of the SSID.
    IP addressing scheme: All addresses are handed out by DHCP server with no reservations of any kind
    The TimeCapsule is sitting three inches from the printer and the printer indicates full signal. Connection of the printer to the wireless network and setup of the printer on the Mac went without a hitch. Only when printing a test document did we discover the problem. The wireless network is behaving as expected when accessing the Internet from both Mac and Windows devices (tested with a Dell laptop running XP and a MacBook running OS X 10.6.2), so I don't see any overall problems with the wireless network.
    Attempted remedies:
    1. Rebooting and powering off, waiting, powering on computer
    2. Resetting the print subsystem, turning the printer off and on again and reinstalling the printer
    3. Unplugging power from the printer and letting it sit for several minutes before trying to print wirelessly.
    None of these worked.
    This question was solved.
    View Solution.

    I don't think there is anything wrong with the DSL modem HW.  There might be an issue with how print data is being routed though.
    Please try the second experiment where you blank-out the default gateway and DNS entries from the printer's internal web configuration page.  Open the printer's internal web page by browsing to its IP address.  Select Networking and then Wireless (802.11).  Under the IPv4 Configuration tab, select Manual IP:
    For Manual IP Address, use the existing printer IP address.
    For Manual Subnet Mask, use 255.255.255.0
    For Manual Default Gateway, leave blank.  This is important.
    Select Manual DNS Server:
    Leave both the Manual Preferred DNS Server and Manual Alternate DNS Server fields empty.  This is important.
    Press Apply.
    Turn off the DSL modem, the printer and all computers connected to your network.  Wait 60 seconds then turn on the DSL modem and then turn on the printer.  Then turn on the computers.  See if this corrects the printing speed.
    Regards / Jim B / Wireless Enthusiasts
    ( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
    + Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Maybe you are looking for