Extremely slow internet connections

My internet connections are slow, freezing, or not functioning at all.  Any ideas as to what might be causing the problem and how I can fix it?

Hello kimldu
Check out the first article below to troubleshoot the connection on your MacBook Pro and check out the section Symptom: The Wi-Fi network seems slow. You may also want to check out the second article to make sure that the router is setup properly to ensure a proper connection.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Regards,
-Norm G.

Similar Messages

  • Windows 7 Ultimate (64-Bit) fresh install, only WLAN and video driver installed but EXTREMELY slow internet connection...

    I recently checked my internet connection on my Asus G53SW and found that it was extremely slow on both the LAN and WLAN connections. I checked with a different laptop (old HP Pavilion) and I get a steady 74mbps+ connection using the same LAN cable and
    also with the WLAN connection. My ISP has checked their side and everything is fine.
    To try and resolve the issue I tried uninstalling, disabling and tweaking various software and even tried safe mode with networking, all to no avail. I then decided to do a complete fresh install this afternoon. I have installed Windows 7 Ultimate (64 bit)
    successfully onto my SSD and everything went smoothly. I have now only installed Nvidia video drivers and the (only) WLAN driver from the Asus support site.
    My WLAN connection remains incredibly slow (amost half what it is on the HP and my MacBook Pro). Clearly this is an issue with either the Asus laptop or Windows but I don't know how to proceed in order to eliminate which it could be other than to try a different
    o/s to W7-Ult.
    Can anyone help who knows more about this than me? Perhaps someone who has had a similar or the same problem because this is giving me a severe headache!
    Thanks in advance to all and for any advice.
    <script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
    tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
    isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
    if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

    Thank you for responding. As I stated in my original post the reason I went through this process was because of an extremely slow internet connection from both the WLAN and LAN connections on my G53SW. At that time I had all of the correct drivers on the
    machine. Whilst I would agree that with the machine only having a video and WLAN driver it may well not be working 'optimally', the rationale for doing this was to get the machine working with the minimum of processes to show that it was not anti-virsu software,
    Steam or the like causing interference.
    I have changed out both of the HDDs this evening (a primary SSD and a secondary 1Tb HDD) for a clean hybrid 1Tb Seagate drive. Once I have installed all of the Asus drivers (and nothing else) I will try the speed test again and report back.
    I can now report that with a fresh install of Windows 7 Ultimate SP1 and ONLY Asus drivers as supplied the issue remains. On a connection where I should see around 75mbps I am actually getting around 18mbps, sometimes considerably slower. This only affects
    my Asus machine.
    <script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
    tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
    isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
    if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

  • Airport Extreme Slowing Internet Connection

    Hope someone can provide some direction for me!
    A few weeks ago I started noticing slowed internet speeds,but thought nothing of it, and attributed the slow down to peak periods. About a week ago was the first time I ran a speed test due to a noticeable depreciation in connection speed. Then, and still today, I’m averaging about 3.4 mbps down / 6 mbps up both wireless and wired with Ethernet cable through the airport extreme. I have Comcast Blast which, until the slowdown, was averaging 20 mbps down / 6 mbps up.
    My setup:
    Macbook (mid-2010), OS X 10.7
    Mac mini (early-2009), OS X 10.7
    Motorola SB5100 Modem
    Airport Extreme 802.11n (3rd Generation)
    Here’s the kicker: when my macbook is directly connected tothe modem (removing the airport extreme), I get amazingly fast internet (26mbps down / 6 mbps up).
    I’ve been browsing around here looking for solutions since my warranty’s expired and have tried the following:
    thanks to this previous discussion
    -Changed Frequency Channel to less populated channels
    -Changed Fireware Versions (was 7.5.2, tried 7.4.2, 7.4.1,and 7.4)
    -Moved the router’s location
    -Moved the
    -Reset the modem
    -Reset the Airport Extreme
    -Factory reset the Airport Extreme
    -Made sure “Ethernet WAN Port” was set to “Automatic(Default)”
    -Changed/Temporarily Removed Security
    Some users have found success (as discussed in the discussion linked above) by swapping out their cable modem. I own mine, so it would be a matter of purchasing a new one (though I'd rather not buy a new one if it's actually my Airport that's failing)
    Could my Airport Extreme be dying and it’s time for a new one?
    Any suggestions or thoughts of things to try?
    Thanks, Everybody!

    Well, I'll see if you can explain this one:
    As suggested, I used Airport Utility to switch the Radio Mode from "Automatic" to "802.11a/n - 802b/g." I was unable to find the option to select "802.11n (5) only - 802.11n only (2.4)."
    I ran the test again with the following results:
         Client Side: [  4]  0.0-60.0 sec  497408 KBytes  67909 Kbits/sec
         Server Side: 0.0-59.7 sec  497408 KBytes  68253 Kbits/sec
    No Change.
    I then discovered that under "Wireless Network Options..." my checked "5GHz Network" had become unchecked. I re-checked this box and connected both server and client computers to this new network and re-ran the test:
         Client: [  4]  0.0-60.1 sec  392192 KBytes  53496 Kbits/sec
         Server: 0.0-60.1 sec 392192 KBytes  53476 Kbits/sec
    Seemingly slower.
    HOWEVER, now when I run an internet speed test, I'm consistently getting ~28mbps down/~6mbps up across all devices (mac mini, macbook).  I'm sort of unclear as to what's causing this change, but it appears, at least for the time being, that the issue has resolved.
    Should I be concerned that the AEBSn is not transfering data near the 300 Mbps on the 5GHz channel? What else could be playing into this issue?

  • RV325: EXTREMELY slow internet connection

    (I apologise in advance for posting this as a separate topic while I initially replied in a similar one but this has since started to affect my business)
    I have an internet connection that does 200mbps. My ISP has an internal speedtest (to guarantee that "nothing internet" comes in between and you are testing the "LAN" connection). With my laptop connected directly to the modem I get 185mbps. With my old router (100mbps port) I get 80mbps. 
    Hoping for awesome results - since I specifically bought it for its gigabit wan ports - I ran the test again with the RV325 in between. The download speed stalled at 25mbps! (So for clarity: 1/8th of the max speed and 3 times slower than my previous router).
    In bandwidth management I've changed both up and downstream numbers to 1.000.000 (it won't go higher) and I do not have any rules, so it should be disabled and hopefully deliver full bandwidth to any device. Unfortunately this does not help a bit. 
    The port is connected @ 1gbps to my modem, my laptop is connected  @ 1gbps to the router and I'm running firmware 1.1.1.06
    I really hope there is something I missed here, because I'm greatly disappointed so far. 

    respect to the effect on business.  same here with my wrvs4400n that proudly displays gb wan/lan connections.  so frustrating.  make sure ips is disabled as mine can evaluate (if elected) http, ftp, telnet and rpc data which can have a dramatic effect on flow.  you said bandwidth is disabled, so that's out of the way.  are you blocking any cookies, java or activex?  how about the L2 switch/port settings, i tell it what i want and eliminate the auto-negotiation (maybe no effect but, i do it) because i view it as unnecessary chit-chat!  try flashing the latest firmware again, reset to factory defaults and reboot to see if that helps... it can't hurt.  if it improves, leave it alone until the next issue.  if you must, add back any changes you made previously from the defaults one at a time, to determine functionality, until you change something to create your bottleneck again.  just ideas.
    it's the standard security features of the router, even at the minimal settings it has to converse with everything (almost).  someone knocks on the door, it has to think, make decisions, find it's weapon of choice and examine your request for the guest.  no ticky no laundry.  maybe it needs new eye wear so it's not so fuzzy looking through the peephole!  just like humans, some days they perform better than others.   heaven help us all with the advancement of technology.  wish i'd be around for the star trek era, when technology flattens out, can't get any faster and runs perfect?  the humor helps me live through it.

  • Extremely slow internet connection for past few mo...

    Hello,
    I am on a BT Total Broadband connection 'Option 3' (unlimited bandwidth). Router is connected to phone extension socket via ADSL micro filter.Been going strong for 3 years since setup. Since early October 2010, my connection speed suddenly dropped to an extreme low. There was no change at all around the home, nothing new, nothing removed. Prior to the sudden drop, the downstream was roughly around 9000 kbps according to HomeHub stats back then, which was good. But since early October and for the past few months the connection has not improved at all. Downstream has been staying constant at 462 kbs
    I have also just tested against the test socket in the master socket, same result, no improvement.
    Signal/Noise Margin is rather high from the average 6db I have read around the forums after looking into HomeHub stats (see below).
    ADSL Line Stats
    I have posted my extensive HomeHub ADSL line details below:
    Modulation:
    G.992.5 annex A
    Bandwidth (Up/Down) [kbps/kbps]:
    888 / 462
    Data Transferred (Sent/Received) [KB/MB]:
    440.00 / 1.03
    Output Power (Up/Down) [dBm]:
    12.0 / 0.0
    Line Attenuation (Up/Down) [dB]:
    12.0 / 24.0
    SN Margin (Up/Down) [dB]:
    15.0 / 31.5
    Vendor ID (Local/Remote):
    TMMB / IFTN
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    2 / 0
    Loss of Power (Local/Remote):
    0 / 0
    Loss of Link (Remote):
    0
    Error Seconds (Local/Remote):
    2 / 0
    FEC Errors (Up/Down):
    0 / 0
    CRC Errors (Up/Down):
    0 / 0
    HEC Errors (Up/Down):
    0 / 0
    Line Profile:
    Fast
    BT Speedtester results
    Below is the BT speedtester results I have just carried out from http://speedtester.bt.com/:
    Summary
    So my connection has dropped from around 9000 kbps to an extreme and sudden low of 462 kbps since October 2010. I have a feeling my line was automatically throttled for unknown reasons, but i'm unsure. Or it could be the high signal/noise? Can anyone shed some light, advice, assistance?
    Thanks in advance,

    I've just carried out the 'Test Socket' test with my current phone (Phone A, a corded digital base phone) and router connected to the test socket via an ADSL micro filter. There was neither any improvement or degradation to the connection after 4 days. You can see the stats at the end of this post.
    However, I have got hold of another corded phone (Phone B, corded only) and plugged this directly into the test socket and carried out the 'Quiet Line' test on 17070, and this time I can barely hear any noise, the noise I hear is very very faint, continuous and almost silent. Whereas when the test was carried out with Phone A under the same circumstances, the noise was truly noticeable and continuous with slight pulses.
    In light of the above findings, i will soon carry out the same 'Test Socket' test this time with Phone B plugged into the test socket via the micro filter along with the router also connected for a few days to notice any changes in the speeds and report back.
    This leads me to a question. How likely is it that a phone can introduce noise into the line and affect the broadband connection? Has anyone else experienced this (or heard of)?
    Also, since my connection has been constantly slow for a few months now, will it take longer than usual for my broadband speed to reach normality due to IP profiling (from what I have read around)?
    Latest ADSL router statistics:
    Uptime:
    0 days, 5:37:55
    Modulation:
    G.992.5 annex A
    Bandwidth (Up/Down) [kbps/kbps]:
    888 / 462
    Data Transferred (Sent/Received) [MB/MB]:
    15.88 / 60.02
    Output Power (Up/Down) [dBm]:
    11.5 / 0.0
    Line Attenuation (Up/Down) [dB]:
    11.0 / 22.0
    SN Margin (Up/Down) [dB]:
    16.5 / 32.5
    Vendor ID (Local/Remote):
    TMMB / IFTN
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    2 / 0
    Loss of Power (Local/Remote):
    0 / 0
    Loss of Link (Remote):
    0
    Error Seconds (Local/Remote):
    2 / 0
    FEC Errors (Up/Down):
    0 / 0
    CRC Errors (Up/Down):
    0 / 0
    HEC Errors (Up/Down):
    0 / 0
    Line Profile:
    Fast
    Hope you had a great Christmas, and have a Happy New Year!

  • If you have an Airport Extreme router and a slow Internet connection ...

    I know that Internet connection speeds are extremely variable, but I wanted to share this post for anyone having performance problems (very slow Internet connection speeds) while using an Airport Extreme router. This may or may not help you, but it might help someone.
    I have a RoadRunner Turbo account, and I was experiencing consistently slow Internet download speeds (an average of only about 300KB/sec). However, when I bypassed my router and connected my Mac directly to the Time Warner modem my download speeds were 6 to 8 times faster (up to about 2MB/sec).
    After weeks of tinkering and reading Apple documents I discovered that my Airport Extreme router had an improper setting. That setting is found under: Manual Setup -> Internet -> Internet Connection -> Ethernet WAN Port. When I was experiencing the very slow speeds, my Ethernet WAN Port setting was: '100 Mbps/Full Duplex.' To fix the problem I simply changed this to 'Automatic (Default).'
    This one change resulted in a huge, positive performance boost for me. I hope this post helps other people.

    You use an App like Filebrowser.  Details here:
    http://www.stratospherix.com/products/filebrowser/

  • Unbearably slow Internet connection using WDS network

    We have an old Airport Extreme (saucer, 802.11b/g) and an Airport Express (802.11n, b/g compatible). We're using the Extreme as a WDS main, and the Express as WDS relay. Wireless devices that connect to the Internet in our house include a MacBook Pro, a couple of iPhones, an iPod Touch, an XBox 360, and a PS3.
    None of these wireless devices are in direct line of sight to the main base station. Typically, our connection to the Internet is decent for the XBox, which has almost a clear line of sight to the relay (Express) base station. On the other hand, the connection for the MacBook Pro, iPhones, and iPod, is extremely slow. Maybe the actual connection speeds are the same for all devices, but at least for the XBox online gaming works. (Haven't tried online gaming with the PS3 yet.)
    The problem that compelled me to post this thread is the slow Internet connection to our MacBook. When our MacBook Pro is moved from its usual location to a place just a few feet away from the Extreme, download speeds are satisfactory (e.g. 10,000+ kbps measured using Speakeasy.net). However, when we sit farther away from the Extreme and are only a few feet from the Express, download speeds are dismal (200-300 kbps). The Internet connection is noticeably slow; web pages load like molasses, and watching streaming video is almost impossible. Upload speeds are usually about 7-10x faster, which is kind of strange.
    Airtunes is off. We've tried setting up the Express base station as a WDS remote instead of relay, no difference. Allow wireless clients is turned on for both main and relay. Channel 1, WPA2 personal security.
    Part of the problem may be due to the fact that our house is steel framed so, depending on location, the frame of the house may get in the way of our wireless network. But even if the MacBook is within 2 feet of the Express with NO walls or obstacles in between, the speed remains dismal. The line of sight from the Extreme (main) to the Express (relay) is impeded by a few obstacles but little in the way of walls.
    However, if the MacBook is close to the Extreme, with good speeds, then I walk away and sit near the Express, I still get good download speeds. This lasts only a short time. Also, if I turn off Airport on my MacBook Pro and turn it back on again, speeds are back down right away.
    I understand WDS cuts the bandwidth down substantially, so I decided to unplug the Express and just use the Extreme station, set to create a wireless network instead of participate as main in a WDS network. When I do this I get satisfactory speeds on the MacBook Pro, even sitting at a location where I used to get the slow speeds.
    So at first I thought forgetting about WDS completely would seem to be the solution to the problem. That seems to be true for the MacBook, but when the Express is offline and the Extreme is the only base station, the XBox and PS3 now are the devices with a very poor connection to the Internet, as there are 3+ steel framed walls between the base station and the devices. When the WDS network is up, the XBox and PS3 are almost in direct line of sight to the relay station (but then I lose speed on the MacBook and other devices.)
    I'm trying to find a solution that allows a good speed connection for all these devices. Right now I have to choose between a regular network with a good connection for my MacBook, or a WDS network that allows gaming but appears to be worthless for the MacBook.
    Your assistance is most welcome.

    I'm trying to find a solution that allows a good speed connection for all these devices.
    The solution is to run an Ethernet cable from the LAN port on the AirPort Extreme base station (AEBS) to the AirPort Express (AX). Then you won't need to use WDS and you won't suffer the bandwidth penalty of WDS. Then you would configure both the AEBS and AX to create a wireless network using the same SSID (network name) and wireless encryption type/level/password. The AX should be configured to act as a bridge (not sharing a single IP address).

  • My 2007 mac pro has a slow internet connection with lion

    Hi:
    I've been dealing with a severely slow internet connection with my 2007 mac pro - dual quad core.  I have os 10.7.3.  I use wifi. 
    Typically, I'll experience difficulty loading websites completely.  Certain sites have a 90% failure rate to load most elements.  Other sites operate quickly from time to time.  Often, a site will simply fail to load at all.  My cable company cannot find anything wrong with my connection and other, newer devices don't have a problem loading sites.  It seems the issue is most likely related to my computer.
    Interestingly, I can usually "jump-start" the connection by turning my wifi connection off and on and this will (temporarily) allow me to get an image or video to download.
    Any ideas?
    Thank you for your time.

    Hi:
    I've been dealing with a severely slow internet connection with my 2007 mac pro - dual quad core.  I have os 10.7.3.  I use wifi. 
    Typically, I'll experience difficulty loading websites completely.  Certain sites have a 90% failure rate to load most elements.  Other sites operate quickly from time to time.  Often, a site will simply fail to load at all.  My cable company cannot find anything wrong with my connection and other, newer devices don't have a problem loading sites.  It seems the issue is most likely related to my computer.
    Interestingly, I can usually "jump-start" the connection by turning my wifi connection off and on and this will (temporarily) allow me to get an image or video to download.
    Any ideas?
    Thank you for your time.

  • Slower internet connection when connection wireless network

    Currently using a Linksys WRT54GL wireless broadband (firmware v4.30.5) router in conjunction with a Thomson Speedtouch 546i ADSL router (ISP provided).
    My problem is that when I connect to the internet over the wireless network I experience a much slower internet connection in comparison with when I use a tp-cable.
    Tested with various online "speed-tests" (I know they are not to be trusted, but they do give a basis for comparison):
    Over wireless network : ca.6000kbits/sec.
    Direct cable from pc to router (tested on both routers):12-13000kbits/sec.
    Hope anyone has any idea what the problem may be, and any help is greatly appreciated.

    Change the beacon to 50 ....and reduce the RTS and the fragmentation by 40 each.....these options are found under the advanced wireless settings...
    Also make sure that u have the latest drivers installed for the Wireless NIC.

  • How to install Lion on Mac with slow internet connection.

    My father's Mac mini has a slow internet connection.  I always update it by taking the update packages that I download on my iMac to his machine.  Will I be able to do that with 10.7 (Lion) when it is purchased/downloaded from the Mac App Store?

    It seems that Apple's license terms will allow that across Macs that share the same App Store ID, but I doubt that's the case with you and your father.  Physically the update package for Lion could be moved, but the licensing issues will have to be worked out.  You're not the only person who's concerned with the issue of how to download a 4 GB file for Lion.

  • How to download adobe products without adobe download manager. I am on the slow internet connection

    how to download adobe products(e.g lightroom) without adobe download manager. I am on the slow internet connection. The adobe download manager ask me that download will finish after 24 hours.

    You can get all the download links to software updates back many years by going to:
    www.adobe.com/downloads/updates/ and choosing your software product in the dropdown list at the top and clicking Go.  This should lead to a page of updates going back in time.  It doesn’t have the .0 versions because those require payment, but the .1-.n free updates to the .0 version s are there.
    You can also get beta software downloads by going to:
    http://labs.adobe.com/

  • IMail 5.2: How do I optimize it for use on a slow internet connection?

    Hi there,
    I recently upgraded to Lion OS X v 10.7.3, and i like iMail 5.2 when I work from my office or home.
    BUT, when I am working in the field I often have access to only glacially slow internet via an internet modem, and iMail takes FOREVER to download my messages. Way longer than my pre Lion version of iMail.
    Is there a way to optimize iMail 5.2 in order to optimize for slow internet connections? For instance, to partially retrieve large messages? Or to somehow deactivate all the synchronizing and other Activity that goes on in the background?
    Many thanks,
    Hoyt

    Use a web based email account like GMail or HushMail, because they are a website and people access their emails from many different machines (phones, computers, slow or fast connections) the site can optimize things better than a dumb mail server.
    It's possible to auto-forward a copy of your present email accounts to have them on the web based accounts too, don't know exactly how to go about it, but many people elsewhere also have the same desire so it's obvious something like that is being used.
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • HT1222 i want to update my ipod softwere but i have slow internet connection how can i will update my softwere esayliy from india.....

    I have apple ipod touch 4th genration here new softwear avalable but in India I have slow internet connection how can update my softwear esay way........
    here I have also my father's Iphone 4s...
    then Can I copy softwear of iphone 4s and intall in ipod touch....

    Each model device requires it's own download of the new iOS version as the update files are specific to each model.

  • HT201263 I am unable to download the restore file for ipod touch due to slow internet connection. is there any other source to download the file to my windows7 computer?

    I am unable to download the restore file for ipod touch due to slow internet connection. is there any other source to download the file to my windows7 computer?

    Try this link or this place
    After the download, hold down the Shift key when you click Update in iTunes, and you'll be prompted to locate the downloaded firmware file.

  • Due to slow internet connection, I cannot update my iphoe to new version 5. Is there any shortcut

    Due to slow internet connection, I cannot update my iphoe to new version 5. Is there any shortcut where I can update my iphone to new version quickly

    If your computer's connection is slow then you can update your iOS from your phone.
    Find a free, strong Wi-Fi network.
    Go to Settings>General>Software Update>choose option "Download and Install"
    Benefit: if you update phone through this method the actual download size will be only 30 to 50 MB only! and it works fine! if you try to download iOS from iTunes it will goes around 800MB.

Maybe you are looking for

  • How do I use a recording deck with Logic?

    Hey Guys, I bought Logic Express with my mac at the end of 2008 and have since been using it with the built in mic on the mac. Recently though I have bought some song backing tracks and want to record higher quality. I bought a small mixing deck, 6 m

  • Error while saving communication channel

    Hi, build up the sample Adapter out of the book "Mastering XI Programming". After deploying it on server, I try to create a communication channel with this adapter. All other PCK objects are saveable, but when I try to save or delete the channel with

  • HT1476 My iPhone 4S quits

    My iPHONE 4S quits on me and says the battery needs to be recharged (it is in the "red zone"). As soon as I plug it in, it shows it is at least 60% charged. The software automatically updates and now I have IOS 6.1.3. Any suggestions?

  • What is After Effects and Magic Lantern?

    Hi.  I'm new to all of this, so I am asking at least twenty questions today. I'm curious if Adobe After Effects is used independantly of Premier or if it can be used as a plug in? Also, just wondering what Magic Lantern is.  I believe this is somethi

  • Loading data from multiple files to multiple tables

    How should I approach on creating SSIS package to load data from multiple files to multiple tables. Also, Files will have data which might overlap so I might have to create stored procedure for it. Ex. 1st day file -data from au.1 - aug 10 and 2nd da