Extremely slow internet (WRT150N)

Hi. I just recently purchased a WRT150N Wireless Router for my household and a WMP300N Wireless Network Controller. Both are 802.11n compatible from my understanding. The other 2 computers in my household are both on G ethernet cards, which most likely will not be upgraded soon. As such the Router is set for a Mixed network.
However, the problem lies in the fact that I am, for some odd reason, the only one with extremely slow throughput speeds. Several speed testing sites have put my download throughput at an amount no higher than 1300 Kbits/s (Sometimes as low as 800 Kbits/s) and this is more or less confirmed by actual download speeds on files no faster than ~100-150 KBytes/sec.
I have the router set on Wide (40 MHz) Radio Band w/ Wide Channel set as 6 and Standard Channel set as 8.
Network SSID was already changed from default "linksys" to something unique to our household.
Beacon Interval: 50
DTIM Interval: 2
Fragmentation Threshold: 2306
RTS Threshold: 2307
Beyond those slight tweaks I have no clue what could be wrong. I don't even know if it's a problem with the Router or my Network Controller. Any help would be greatly appreciated.
Message Edited by Etherius on 02-10-2008 01:44 PM

There are few settings you can change on the router .....
Change the Radio Band to Auto ....
Wide Channel & Standard also to Auto ..... click save settings .....
Let me know the Operating System on the wireless computer .... so that i can tell you few steps on the same .....

Similar Messages

Windows 7 Ultimate (64-Bit) fresh install, only WLAN and video driver installed but EXTREMELY slow internet connection...

I recently checked my internet connection on my Asus G53SW and found that it was extremely slow on both the LAN and WLAN connections. I checked with a different laptop (old HP Pavilion) and I get a steady 74mbps+ connection using the same LAN cable and
also with the WLAN connection. My ISP has checked their side and everything is fine.
To try and resolve the issue I tried uninstalling, disabling and tweaking various software and even tried safe mode with networking, all to no avail. I then decided to do a complete fresh install this afternoon. I have installed Windows 7 Ultimate (64 bit)
successfully onto my SSD and everything went smoothly. I have now only installed Nvidia video drivers and the (only) WLAN driver from the Asus support site.
My WLAN connection remains incredibly slow (amost half what it is on the HP and my MacBook Pro). Clearly this is an issue with either the Asus laptop or Windows but I don't know how to proceed in order to eliminate which it could be other than to try a different
o/s to W7-Ult.
Can anyone help who knows more about this than me? Perhaps someone who has had a similar or the same problem because this is giving me a severe headache!
Thanks in advance to all and for any advice.
<script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

Thank you for responding. As I stated in my original post the reason I went through this process was because of an extremely slow internet connection from both the WLAN and LAN connections on my G53SW. At that time I had all of the correct drivers on the
machine. Whilst I would agree that with the machine only having a video and WLAN driver it may well not be working 'optimally', the rationale for doing this was to get the machine working with the minimum of processes to show that it was not anti-virsu software,
Steam or the like causing interference.
I have changed out both of the HDDs this evening (a primary SSD and a secondary 1Tb HDD) for a clean hybrid 1Tb Seagate drive. Once I have installed all of the Asus drivers (and nothing else) I will try the speed test again and report back.
I can now report that with a fresh install of Windows 7 Ultimate SP1 and ONLY Asus drivers as supplied the issue remains. On a connection where I should see around 75mbps I am actually getting around 18mbps, sometimes considerably slower. This only affects
my Asus machine.
<script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

Extremely Slow Internet From Linksys WRTU54G-TM

Hi all,
I'm hoping someone can help me with this issue. I got the Linksys WRTU54G-TM for T-Mobile's @home service. According to the store employees, I should be able to just plug it in and it should work. I got it home, disconnected my old router (a Linksys WRT54G) and plugged it in. After a few minutes, the phone was up and working and sounds good; however, the internet coming off of the router is extremely slow (both wired and wirelessly). So slow that pages won't load. The title bar will tell you where you're trying to go; however the page will not load.
Before calling for help, I contacted my internet provider (Cox Cable in Phoenix) and verified that the network was working and that my modem (Terayon brand) was good. When I hook the modem directly to the computer I get my full connection (around 20 megs down). Then I called T-Mobile and was connected to Linksys since the router was connecting and providing phone service.
I spent an hour on the phone with Linksys. We flashed the firmware to the latest build, reset the modem to factory settings, reset the modem via the button on the back all the while power cycling the whole setup numerous times. The rep had me check some settings on my computer and I was able to ping from the cmd prompt. In the end, she felt that I received a bad router and said I should return it. She never mentioned cloning the MAC address; however, I saw that on the T-Mobile forums and tried it - no luck.
I took the router back to the T-Mobile store and the rep happily exchanged my router for a new one. I got it home, plugged it in and have the same problem. Phone works, internet doesn't pass through the router properly.
I went ahead and flashed the new router and reset it factory settings and that did not help (all the things I did with the Linksys rep with the first router). I'm going to be calling T-Mobile/Linksys again tomorrow but I wanted to see if there was anything anyone in these forums may know what I could try.
With the second router, I did try plugging it into my old router (modem - old router - new router), the phone worked and the internet worked (both wired and wireless); however, the internet is not as quick as going through one router and I do not want to have two routers set up.
Secondly, I looked at the configuration of my old one and set the new one to the same exact settings; however, one setting could not be matched. My old router is set to an operating mode of GATEWAY, the new one is set as ROUTER. The only options on the new one are router and bridge. Could this be the issue?
It was recommend on the T-Mobile forums to run a speed test and post the results, which I can do tonight after I get home from work.
I've searched these forums, Google, the T-Mobile forums, the Cox forums at dslreports.com, and tons of other places and cannot find an answer. Based on the size of Cox, it's hard to believe I'm the only one with this issue. Any help would be appreciated. I have until Sunday to return the router and cancel the service without any termination fees.

Try the following settings on the router...
Change the Wireless Channel to 11-2.462GHz under Wireless tab...Under Advance Wireless Settings,Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304.Under Security tab,uncheck the option "Block Anonymous Internet Requests "...Power Cycle the router and check..

New MBA extremely slow internet after upgrading to 10.6.7

Hey Folks, I have updating my brand new MBA to 10.6.7 and my internet is now extremely slow through the airpot. All of my other macs are running 10.6.6 and are very fast. Im using a new Airport Extreme base station, does anyone have any idea on how to fix this. LIke I mean its extremely slow online.
Thanks
Jason

Good day,
I'd like to confirm a few things:
What action/activity are you performing in Acrobat when it crashes?
Is the crash consistent at the same point?
You stated in the subject '..after upgrading to 10.6.7'
What OS was on your iMac when you purchased it?
Was this problem occuring when using an earlier verion of 10.6.x?
Have you applied to font update Apple released to address some of the problems they introduced with 10.6.7?
Did you perform a clean install of Acrobat on your iMac after you purchased it or was the application transferred in some way?
I hope we can get this resolved for you!
Regards,
David
Acrobat Community Manager
Adobe Systems

Extremely slow internet using wifi.

Hi guys,
First post here so be gentle.
After a week or so of using Arch I started noticing some strange things happening so far:
- Pacman's package list downloading from the repos happens at regular speed (around 700Kb/s), then followed by a 30 secs lag between each package download, which starts at normal speed, but then come down to around 2Kb/s then I get an Address Record error, which terminates the download.
- first ping to google is fine, then any ping after either get a 'host unknown' error or ping takes around 9Kms.
- another strange behavior that happens when pinging is that the wireless connection start at a bit-rate of 1Mb/s (according to iwconfig), then every time I ping google the bit-rate jumps (1Mb/s -> 12Mb/s -> 24Mb/s -> 54Mb/s -> 81Mb/s).
- can't load any websites (google takes around 5min to load, most other sites I just get a timed out error)
So my config is as follows:
- Intel Centerino Ultimate-N 6300
- connected using NetworkManager (but while connected with wicd the problem still occurs).
- running gnome 3.
- the router is Edimax 6524n
So far, I've checked resovle.conf (which only states my router ip address, which is fine because it serves as my DNS server), my hosts file (which is configured according to the tutorial in ArchWiki) and I've disabled the ipv6 module.
I've asked in several forums so far but with not much success, so i'm really hoping someone can solve it for me.
Thanks in advance!
PS: in one of the forums i asked someone asked me to post the output of dmesg | grep -i iwlagn, so here it is:
pastebin.com/Pmhi6swv
PS2: This problem does not occur in any of the Windows machines that are connected to the wireless network nor does it happen when this exact machine runs Windows; so the problem is definitely in Linux
Last edited by gzaidman (2011-06-01 20:18:37)

I'm kind of having a similar problem. Ever since upgrading to 2.6.39 my wifi is extremely slow. It connects in g mode according to iwconfig and other network analyzing programs. I have iwl3945. The problem is. First it connects to wifi network(which takes about 30secs to successfully complete a connection request) it works great and I'm measuring 25Mbit(which is my internet connection speed) on speedtest.net. But after some minutes my speed drops to around 100KB/s and has a slight fluctuation, not quite constant. Even the upload is bigger than the download speed. If I disconnect the wifi, reload the kernel module and reconnect, then it works again for 1-2 minutes at full speed, then the speed drops again.
http://www.speedtest.net/result/1338532978.png
Any suggestions, or ideas would be very helpful. Thank you.
btw. I use NetworkManager and kernel 2.6.39
iwconfig output:
wlan0 IEEE 802.11abg ESSID:"Kozma2"
Mode:Managed Frequency:2.442 GHz Access Point: 00:23:54:14:CE:E6
Bit Rate=54 Mb/s Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=50/70 Signal level=-60 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:37462 Missed beacon:0

Extremely slow Internet over Airport, good speed with Ethernet

I've been using an airport extreme router (802.11n) for a while and recently I've noticed an incredible slow Internet over wifi. When I do a speed test it shows numbers like 200 kbps and I have a 10 mbps cable Internet connection. When I connect the ethernet from the modem it's perfect speed. Obviously Airport is slowing down my Internet connection. I tried resetting the Airport by pressing the reset button at the back, and it worked perfectly for a while. But after a few days it got back to slow Internet. Anybody have any idea?

I don't know if this will help anyone else, but I came across some changes (purely by experimentation) that may help. I hope so, at least...
I opened the Airport Utility and I swapped channels. The default is channel 6, but every other WiFi router defaults to this channel, too. I changed my Airport Extreme to use channel 3 (as well as my Airport Express), and now things are back to what I would have expected for an 802.11g connection.
I will offer the suggestion that those of you with the same Internet slow-down observed on their iMac G5's try swapping channels. If you have an expanded WiFi home network vis-a-vis an Airport Express, be sure to update it first before you update your Airport Extreme.
Best wishes and good luck!
TRB

Extremely slow internet in vista ultimate

been having this problem since i installed windows vista ultimate. i had xp before on my imac 20" 2.4ghz and it worked fine. but since i installed the vista ultimate the internet is extremely slow and it would take an hour to open a webpage, if im lucky.
so far the only solution i have now is to restart the router everytime i switch from osx to vista ultimate. sometimes the internet is so slow i can't even access the router webpage (192.168.0.1). but in the meantime i can access it with my ipod touch no problem.
is anyone else having the same problem?
hope to get some response.
thanks a lot!

I encountered very slow network performance with Vista and bootcamp and this is what I found.
I have a DLINK DIR-655 router which I upgraded the firware to 1.10 (which supports 802.11n and some other enhancements). I did this for it seems that Vista was handing my DLINK Router. This router seems to work great on my iMac running Leopard in 802.11n mode.
Next I noted that the Microsoft Broadcom 802.11n wireless driver was being loaded in Vista/Bootcamp. I believe during some of the Windows Update that the older Broadcom driver was loaded.
I reloaded the driver located on the Leopard Install DVD and in the "Drivers" folder and installed the "BroadcomInstaller". This installed the Broadcom driver ver 4.8.75.0 date 1/8/07.
Then in the Driver properties in the Advanced Settings, I did the following
IBSS Mode set to "802.11a/b/g/n Auto"
Rate (802.11b/g) set to "54" vs "Use Best Rate"
This did not set my network to 802.11n but my network performance went from dismal to excellent. I tried playing with the Rate settings but it appeared that the IBSS mode did the trick. Now I can not wait until I can get 802.11n working.
Hope this helps

Extremely slow internet conection.

Alright. I returned from holiday yesterday and found that the internet was extremely slow.
In an attempt to correct the problem I have tried a whole host of things, including speaking to a bt technical engineer via online live chat as well as consulting someone on the phone.
Nothing has worked.
After speaking with my dad who was home, he told me that it has been like this for a week now and he had resetted the routuer once in an attempt to fix the problem. Personally I have reset the router maybe about 5 times today, including trying two other routers, and the problem remains. I've only recently learnt (by reading through these forum pages) that resetting the router is probably the worse thing you can do. That being said, the problem arose before the resets and not after.
After doing a speed test this is the result.
I've read something about waiting 3/5 days for the profile to automatically get up to speed, but that is simply unacceptable. Is there no way for bt to reset the profile at their end?
Solved!
Go to Solution.

your profile has dropped due to problems with your connection. It may have had numerous resets by the hub itself while you were away and unless the stats are checked on a regular basis you would probably never know it had happened. however then you started to try and get the speed back by resetting the router and changing for another and each time causing another reset.
this was seen by the exchange as a connection problem and the result was that your noise margin gets increased and you speed drops as the exchange tries to stabilise your connection. the profile ends up set by the lowest speed during all these resets.
before the profile rises to match your new speed the exchange equipment waits 3/5 days to make sure your line is stable otherwise if your profile rose and there was still a problem it would drop almost immediately.
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Extremely slow internet pages take 1 min to load

hola,
my internet on my new MBA 11 is extremely slow both on safari and firefox.....I installed the latest software and it is not the internet provider either...I'm lost and frustrated
help me
xxx

I have the same problem. Seemed to work okay initially, but after a few months my 11" MBA craws like a PC with a very bad virus or something. It is currently taking FOREVER to download a software update (just hoping probably unrealistically that may do something). Also my trackpad has stopped scrolling up/down or does so only intermittently. Single clicks are unreliable. I have to use an external mouse. I was having the slow speeds before the trackpad died though. Pretty disappointing for a machine a few months old and really only moderately used. My MacBook that's about 4-5 years older is still working great and so much faster on same internet router (a Mac router). Anyone????

Extremely slow internet and staying connected

I got Verizon internet almost 2 weeks ago. Ever since then it has been nothing but one problem after another. It cuts out so many times a day. I have to reset the modem 20+ times a day. Its very frustrating. I tried talking to customer service about it and they dont do anything, all they say is to go to the troubleshooting page and look around on there. I am ready to cancel because it is getting ridiculous. My modem is the Actiontec GT784 and it has built in Wifi, which cuts out as well. And the speed of the internet and the Wifi is extremely slow when it is connected. SOMEONE HELPPPPP!!!

Bad timing to get FIOS, There's an outage and Verizon doesn't seem to be doing anything.
http://www.dslreports.com/forum/r27957080-Problem-with-Fios

Extremely slow internet on brand new all in one pc

bought a brand new hp all in one pc 20-2200a. general use is good but internet is extremely slow. my 8 year old apple laptop is atleast 5 times the speed on the same server.
any help would be much appreciated

Hello @dean74,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your brand new desktop computer is experiencing slow Internet. Are you other wireless devices experiencing a similar issue? Does this occur with more than one browser?
In the meantime, I recommend following the steps in this document on Windows 8 stops responding or becomes very slow after connecting to the Internet. This should help improve the speed of your computer's browsing capabilities.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Extremely slow internet data downloading

I have 2 other older Macs connected to my LAN both of which access the internet at normal speed. My new Mac mini pings addresses at the same rate as the other Macs but data download speed is extremely slow. Has anybody had this problem?

Define extremely slow.
Start with the basics:
1. System Preferences -> Network -> Network Port Configurations.
Uncheck all the boxes except the method you use to connect to the network (airport checked if you are wireless, or Built-in ethernet if you are wired)
2. System Preferences - Network -> Airport (or Built-in Ethernet depending on step 1.) -> TCP/IP -> Configure IPv6
Change selection to OFF
Under DNS (Optional Box) you may wish to manually enter in the IP addresses of your Service Providers DNS servers.
3. Because you have older Macs with an older selection of LAN hardware to access the internet you may want to see what the speed and duplex settings are on your box (access switch, broadband router, hub) and match those settings on your Built-in Ethernet if you are using that instead of Airport.
4. If you are wired, switch cables with one of the older Macs.
That should be a start.
Jan J.

Airport Extreme Slowing Internet Connection

Hope someone can provide some direction for me!
A few weeks ago I started noticing slowed internet speeds,but thought nothing of it, and attributed the slow down to peak periods. About a week ago was the first time I ran a speed test due to a noticeable depreciation in connection speed. Then, and still today, I’m averaging about 3.4 mbps down / 6 mbps up both wireless and wired with Ethernet cable through the airport extreme. I have Comcast Blast which, until the slowdown, was averaging 20 mbps down / 6 mbps up.
My setup:
Macbook (mid-2010), OS X 10.7
Mac mini (early-2009), OS X 10.7
Motorola SB5100 Modem
Airport Extreme 802.11n (3rd Generation)
Here’s the kicker: when my macbook is directly connected tothe modem (removing the airport extreme), I get amazingly fast internet (26mbps down / 6 mbps up).
I’ve been browsing around here looking for solutions since my warranty’s expired and have tried the following:
thanks to this previous discussion
-Changed Frequency Channel to less populated channels
-Changed Fireware Versions (was 7.5.2, tried 7.4.2, 7.4.1,and 7.4)
-Moved the router’s location
-Moved the
-Reset the modem
-Reset the Airport Extreme
-Factory reset the Airport Extreme
-Made sure “Ethernet WAN Port” was set to “Automatic(Default)”
-Changed/Temporarily Removed Security
Some users have found success (as discussed in the discussion linked above) by swapping out their cable modem. I own mine, so it would be a matter of purchasing a new one (though I'd rather not buy a new one if it's actually my Airport that's failing)
Could my Airport Extreme be dying and it’s time for a new one?
Any suggestions or thoughts of things to try?
Thanks, Everybody!

Well, I'll see if you can explain this one:
As suggested, I used Airport Utility to switch the Radio Mode from "Automatic" to "802.11a/n - 802b/g." I was unable to find the option to select "802.11n (5) only - 802.11n only (2.4)."
I ran the test again with the following results:
     Client Side: [ 4] 0.0-60.0 sec 497408 KBytes 67909 Kbits/sec
     Server Side: 0.0-59.7 sec 497408 KBytes 68253 Kbits/sec
No Change.
I then discovered that under "Wireless Network Options..." my checked "5GHz Network" had become unchecked. I re-checked this box and connected both server and client computers to this new network and re-ran the test:
     Client: [ 4] 0.0-60.1 sec 392192 KBytes 53496 Kbits/sec
     Server: 0.0-60.1 sec 392192 KBytes 53476 Kbits/sec
Seemingly slower.
HOWEVER, now when I run an internet speed test, I'm consistently getting ~28mbps down/~6mbps up across all devices (mac mini, macbook). I'm sort of unclear as to what's causing this change, but it appears, at least for the time being, that the issue has resolved.
Should I be concerned that the AEBSn is not transfering data near the 300 Mbps on the 5GHz channel? What else could be playing into this issue?

I have extremely slow internet on battery power

When i unplug my MBP the wireless internet gets extremely slow - sites is loading very slow. There is nothing when i use a cable. I connect to a airport extreme.
Message was edited by: jmmm

Tried with no success.
Seriously, when a PC sat next to me can download Windows 7 SP1 faster than I can download Facetime on the Mac, Apple have seriously screwed up and I am not happy
Mac:
http://www.speedtest.net/result/1178259379.png
PC:
http://www.speedtest.net/result/1178266715.png
I know the difference is neligable at the moment but it shows what I mean. At times the PC can be hitting 3.5Mbps yet the Mac cant even hit 1Mbps
Message was edited by: Evostance
Message was edited by: Evostance

[SOLVED] Extremely slow internet

Hello.
I'm having a problem with really slow internet on Arch, but it's working really fast and smooth on Windows. This started to happen once i moved my old HDD to a new built computer, so i wouldn't have to reformat etc. (Now i have reformatted and also tried Debian, same thing there and now)
Any ideas?
rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged.
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
# VERBOSE: Verbose level (from 1 to 8). man 3 syslog for level info
LOCALE="sv_SE.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Stockholm"
KEYMAP="se-lat6"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
VERBOSE="3"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
MOD_AUTOLOAD="yes"
MODULES=()
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="Cerberus"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock syslog-ng @network dbus netfs @rtorrent @crond alsa)
resolv.conf
nameserver 8.8.8.8
nameserver 8.8.4.4
hosts
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost Cerberus
# End of file
This is my dmesg:
http://pastie.org/2359904
errors.log
http://pastie.org/2359912
messages.log
http://pastebin.com/EUUhWayF
lspci -vv
http://pastie.org/2359917
ICSI Netalyzr
http://n3.netalyzr.icsi.berkeley.edu/su … -44fb-bd2d
Also tried using the DNS assigned to me by the ISP, no difference in speed.
Everything is correct as far as i can see
Last edited by Median (2011-08-13 14:11:34)

Aug 12 09:06:44 localhost kernel: [ 2119.377962] BUG: scheduling while atomic: X/13058/0x00000002
Aug 12 09:06:44 localhost kernel: [ 2119.378345] BUG: scheduling while atomic: X/13058/0x00000002
Aug 12 09:06:44 localhost kernel: [ 2119.378752] BUG: scheduling while atomic: X/13058/0x00000002
Dunno how much of an adverse effect *that* bug is having.
Aug 12 09:06:44 localhost kernel: [ 2119.378069] [<ffffffff813e9ed3>] __schedule_bug+0x5f/0x64
Aug 12 09:06:44 localhost kernel: [ 2119.378071] [<ffffffff813f0381>] schedule+0x831/0x9f0
Aug 12 09:06:44 localhost kernel: [ 2119.378095] [<ffffffffa02262e2>] ? firegl_trace+0x72/0x1e0 [fglrx]
Aug 12 09:06:44 localhost kernel: [ 2119.378098] [<ffffffff81045128>] ? __wake_up_common+0x58/0x90
Aug 12 09:06:44 localhost kernel: [ 2119.378116] [<ffffffffa02262e2>] ? firegl_trace+0x72/0x1e0 [fglrx]
Aug 12 09:06:44 localhost kernel: [ 2119.378118] [<ffffffff81046e13>] ? __wake_up+0x53/0x70
Aug 12 09:06:44 localhost kernel: [ 2119.378121] [<ffffffff8107f470>] ? prepare_to_wait+0x60/0x90
And that. You need to investigate these. Hopefully it's just one bug.

Extremely slow internet (WRT150N)

Similar Messages

Maybe you are looking for