Extremely slow PP Export with Dynamic Links

I have very slow exports from Premiere Pro that are entirely made with Dynamic Links to AE (green screen footage).
It's taking about 4+ hours to export a 12 minute video!
I'm on an iMac late 2012
3.2 GHz Intel Core i5
24 GB 1600 MHz DDR3
NVIDIA GeForce GTX 675MX 1024 MB
OS Yosemite
Footage is on an external HD
Project file is on main HD
Writing exported file to external HD
I've followed several troubleshooting tips including:
Uninstall and re-install CC 2014
Clean adobe media files
Check permissions on all folders
Switch Open CL to Software Only
Unchecked "Display out of sync indicators for unlinked clips"
Disabled "Show Duplicate Frame Markers"
Disabled "Show FX Badges"
I've also tried changing the location of where the final file is written to.
I've also tried this on my MBP with 2.3 GHz Intel Core i7, 8 GB RAM and AMD 6750M
Same results.
Any ideas? Am I missing something obvious here?
Thanks.

Wrong forum. This is the hardware forum for hardware related posts.

Similar Messages

Slow PPr Export with all Dynamic Links

I have very slow exports from Premiere Pro that are entirely made with Dynamic Links to AE (green screen footage).
It's taking about 4+ hours to export a 12 minute video! Without the dynamic links, it takes about 20 minutes.
I'm on an iMac late 2012
3.2 GHz Intel Core i5
24 GB 1600 MHz DDR3
NVIDIA GeForce GTX 675MX 1024 MB
OS Yosemite
Footage is 1920x1080 .MOV with H.264 Codec, Linear PCM
Footage is on an external HD
Project file is on main HD
Writing exported file to external HD
I've followed several troubleshooting tips including:
Uninstall and re-install CC 2014
Clean adobe media files
Check permissions on all folders
Switch Open CL to Software Only
Unchecked "Display out of sync indicators for unlinked clips"
Disabled "Show Duplicate Frame Markers"
Disabled "Show FX Badges"
I've also tried changing the location of where the final file is written to.
I've also tried this on my MBP with 2.3 GHz Intel Core i7, 8 GB RAM and AMD 6750M
Same results.
Any ideas? Am I missing something obvious here?
Thank you

Hi Matt,
Try this: close After Effects when rendering in Premiere Pro.
Thanks,
Kevin

Issue with Dynamic Link with Premiere CC and After Effects

I'm having a strange and annoying issue with Dynamic linked clips in Premiere CC:
When I render or export my timeline the progress will stall when it hits a dynamic linked clip. It will stay stalled until I click the After Effects application and make it the active window. Once that happens the render/export resumes at normal speed.
This is annoying as I can't start a render and walk away or work on different windows, I have to babysit all the renders to make sure they go through.
Has anybody experienced this and know of any solutions?
I'm running the latest version of Premiere (7.2.1) and After Effects 12.2.0.52 on Mavericks 10.9.1 with a GTX 770 Video Card.

Does it still pause if AE is closed completely? I often experience slower AME renders from Premiere over dynamic link material when AE is open. Closing AE speeds things up. Go figure.

Time Ramping with Dynamic Link

I tried to dynamic link to after effects and make a time ramp in AE however the audio is still not ramping with the footage. Is this possible or do I have to export out of AE to do a Time Ramp (which would be pointless in regards to dynamic linking).
Thank you,

You have already been provided with step by step explanation:
- when you replace a clip in PrPro timeline with dynamically linked AE composition, that dynamically linked composition appears as an asset in PrPro Project panel. If you have difficulties with understanding what Project panel is, start with Premiere Pro basics;
- dynamically linked composition in the Project panel is an ordinary reusable asset like any other asset imported into the project, and it contains 2 channel stereo. If you drag this asset from the Project panel and drop it into the timeline, that 2 channel stereo, which represents the result of your manipulations with the audio inside dynamically linked composition in respective AE project, will also be brought into PrPro timeline.
If you still do not understand all the above, provide step by step description of what you are doing exactly, because I can't read your mind and have no the slightest idea what can be unclear and therefore cause any issue with bringing audio from dynamically linked composition into PrPro timeline.

Hello I have a CS5 Master Collection with Dynamic Link problems

Hello Adobe,
I had no problems with CS5 Master Colection, but after 1 week Encore dont work, the problem is, Dynamic lInk is not wordking.
I deinstall all Adobe products and use the adobe creative suite cleaner tool and after that I make a register cleanup.
Then I Start up windows 7 Pro 64 Bit Agan and install de CS5 Suite, but after that the same problems with Dynamic link apear
I hope anyone have an solution!!

Refer to this:
http://myleniumerrors.com/?s=25+%3A%3A+101
Different program, but similar causes...
Mylenium

Reinstalling AE and PP due to an error with dynamic link. Where do i find the program install? And tips on how to reinstall without messing things up? last question is, does my recent files and saves work after the reinstall?

I have allready bought the programs, but need to reinstall AE and PP due to an error with dynamic link.
Where do i find the program install?
And tips on how to reinstall without messing things up?
last question is, does my recent files and saves work after the reinstall?
Thank you

karianne wrote:
I have allready bought the programs, but need to reinstall AE and PP due to an error with dynamic link.
Where do i find the program install?
Which versions? Which operating system?
Try Download and Installation Help

After Effects won't close/Problems with dynamic links

When I quit After Effects the icon still shows up and it says that it is still open, even force quit will not work. Also having problems with dynamically linked files between after effects and Premiere pro. Rendering in Premiere doesn't work unless I go to AE, save the project, then go back to Premiere. I have OSX Mavericks 10.9.2, a late 2012 mac pro, and AE CC 12.2.1.5

Kevin: would appreciate further thoughts on this.
I am using Pr2014, version 8.0.0 I am using AE2014, version 13.0.2.3. When I was on earlier versions of each, I had no problem importing AE comps into Pr. I'd choose import in Pr, then select the AE project, then select the comp. But with my new and improved versions of AE and Pr, I keep getting "importer reported a generic error."
I also tried to go the other way. I selected in Pr the clips I wanted to work on in AE, and then tried "replace with AE comp" but got the "generic error" message again..
Finally, I attempted to create a Dynamic Link from Pr via the File menu, but with each of the options from there, I got "failed to connect to AE Dynamic Link"
Any advice you can share, would be most welcome.

Unstable After Effects CC with dynamic link

Hi all,
I just bought a new iMac for editing etc. (Before the iMac I used my MacBook Pro). Everything works just fine but there is one issue with After Effects CC.
When I have Premiere Pro CC open in the background and there is a dynamic link sequence in AE. My iMac is taking a long time to load video previews when scrolling through the timeline. Also the RAM Preview will hang after a couple of seconds for 5-10 seconds and than continues. I also noticed that MB Looks will take a long time to load too.
So is there a conflict between the two applications or is it because of the sharing RAM or graphics card memory? What are the best settings for the Adobe applications for using RAM and graphics?
System specs:
iMac 3,5 GHz i7 (Late 2013)
32 GB RAM
256 GB flash storage
NVIDIA GTX 780M 4 GB
Kind regards,
Teun

With the new 12.2 update installed there is no difference. Still very slow playback from PP footage in AE. It takes a long time to load the preview when scrolling through the timeline in AE. I noticed that when I close PP the lag is gone, or when I switch from AE to PPro and back. But then after a few seconds the lag is back when PP is active in the background.
Any ideas?

Can't exort from Premiere pro to Encore CS3 with Dynamic Link

Hi,
I have finnished a projekt in Premiere Pro CS3 and when I want to export it to Encore with danamic link I don't have this option in the menu. I only have the option to use dynamic link to After effect.
I have Production Premiem and use Vista 32 bit.
I'm thankfull for any help
/Chris

No I have the same option as i Premiere, to import from After effects.
I have searched several forums and never heard anyone having this problem.
Chris

Adobe Premiere Pro and After Effects CS5.5 Lagging Horribly with Dynamic Link

I just bought a brand new computer. It is a beast
Windows 7 64-bit
Intel i7-980 6 cores with HT = 12 CPU cores
Nvidia GTX 570HD 1280mb 328 bit
120gb SSD sata 3
600 gb Velociraptor drive 10000rpm
8gb DDR3 1866MHZ ram
So you would think I would get no lag. But for some reason, when I edit in premier pro or after effects, especially when I use dynamic link with premiere and after effects. It lags realllllly badly. I am talking about 5fps and I have to pause and wait like 20 secs then hit play again to get 5 secs of smoothness and then the laggyness returns. I am not even using heavy footage. It is footage off of a Canon 5D Mark II h.264. I tried messing around with all the settings but I cannot get anywhere. Anyone know what the problem might be? I don't have any other programs running since I just installed these. This lag is really holding me back and I cannot edit properly because of it.

Your memory is ill configured, since you are using it in dual channel mode instead of triple channel mode and 8 MB is about bare minimum. You would be better off if you were to increase memory to 24 GB. Secondly, your disk configuration is the absolute minimum requirement, so adding a couple of disks will help performance as well.
I am not even using heavy footage. It is footage off of a Canon 5D Mark II h.264
Mistake. It is one of the most demanding codecs on the market. Look here: Adobe Forums: System requirements for CS5
You could try the PPBM5 Benchmark to see how well your setup performs.

Extremely slow wireless printing with HP Photosmart Premium C309g-m

I'm seeing extremely slow print speeds when printing wirelessly from a Mac or a Windows XP system to a new HP Photosmart Premium C309g-m printer. The printer begins printing immediately when I request a print, but it only prints one line. It will then take about 15 minutes to print the rest of the page, printing each line after a very long pause. Demo page printing doesn't exhibit this problem, only documents from programs like Word 2008, Safari and Firefox (tried firefox on PC and Mac) are affected.
If I connect to the printer through a USB connection it prints fine, so this problem appears to be with wireless printing only.
Printer: HP Photosmart Premium C309g-m
Computer: Mac mini (Late 2009 model) (also tried a Windows XP laptop as a comparison, using latest drivers from HP's website)
OS: Mac OS X 10.6.2 with all available updates installed
Computer connection method: Wired Ethernet connection to wireless router
Printer drivers: version 2.2.1 (Apple supplied, HP drivers never installed as system shipped with 10.6)
Wireless router: Apple TimeCapsule (Early 2009) 1TB, running in a/n and b/g modes on 2.4 and 5GHz. TimeCapsule is in bridging mode as the DSL modem handles DHCP service
Encryption: WPA2 Personal, no MAC filtering or hiding of the SSID.
IP addressing scheme: All addresses are handed out by DHCP server with no reservations of any kind
The TimeCapsule is sitting three inches from the printer and the printer indicates full signal. Connection of the printer to the wireless network and setup of the printer on the Mac went without a hitch. Only when printing a test document did we discover the problem. The wireless network is behaving as expected when accessing the Internet from both Mac and Windows devices (tested with a Dell laptop running XP and a MacBook running OS X 10.6.2), so I don't see any overall problems with the wireless network.
Attempted remedies:
1. Rebooting and powering off, waiting, powering on computer
2. Resetting the print subsystem, turning the printer off and on again and reinstalling the printer
3. Unplugging power from the printer and letting it sit for several minutes before trying to print wirelessly.
None of these worked.
This question was solved.
View Solution.

I don't think there is anything wrong with the DSL modem HW. There might be an issue with how print data is being routed though.
Please try the second experiment where you blank-out the default gateway and DNS entries from the printer's internal web configuration page. Open the printer's internal web page by browsing to its IP address. Select Networking and then Wireless (802.11). Under the IPv4 Configuration tab, select Manual IP:
For Manual IP Address, use the existing printer IP address.
For Manual Subnet Mask, use 255.255.255.0
For Manual Default Gateway, leave blank. This is important.
Select Manual DNS Server:
Leave both the Manual Preferred DNS Server and Manual Alternate DNS Server fields empty. This is important.
Press Apply.
Turn off the DSL modem, the printer and all computers connected to your network. Wait 60 seconds then turn on the DSL modem and then turn on the printer. Then turn on the computers. See if this corrects the printing speed.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Create and link to After Effects compositions with Dynamic Link (Production Premium or Master Collection only)

i have adobe creative suite master collection cs5... i'm currently editing my project in advertising in premiere pro and tried to replace my clip with an AE, then this window appeared saying "adobe dynamic link needs production premium." but your post says that it works on master collection too. can you tell me a fix that does not require uninstalling or deactivating coz i need to finish my project by tom and my time is running out thanks

If you're under time constraints, just render the clip out of AE and import it into Premiere. You can worry about getting Dynamic Link straightened out later.
If you're unwilling to do a total uninstall, run the Adobe Cleaner application and then reinstall, you really have very little choice in the matter. Get busy.

Export with dynamic file name

Hi everyone.
I want to know how export oracle tables with dynamic file name on windows XP platform.
bye.

You'd have to generate the export command-line or par file using a script -- Windows or SQL !
It would be easy to use SQL to generate the script.
So you could have a BATch file that
a. Calls the SQL to generate the export command-line or parfile
b. Executes the export
even possibly run in a loop.
Hemant K Chitale

No Audio with Dynamic Link

I've got a clip from After Effects CS3 that is dynamically linked to my Premiere Pro project. The clip has audio in After Effects and it's turned on, but the audio shows up blank in Premiere Pro. Just wondering if there is something special I need to do to get the clip's audio to work in Premiere Pro.
Thanks

>As a work around, you could always just overwrite the DL Comp's audio in the sequence with the original audio file.
I thought about that, but I was hoping to find an answer to the issue so I didn't have to do that every time.
>Additionally, what is the audio file in AE? Does that file conform to
your project settings in Premiere? Or have you dropped an MP3 file on a
into the layer window in AE?
It's just an SD DV video clip of an interview that was captured into Premiere Pro from a miniDV tape and I took it into AE to cover up something in the background. The audio plays fine in the original clip. The audio works fine in AE when I do a RAM Preview or use the num pad "." to play it back.
Harm, what additional information did you want? I thought I explained my issue pretty well, but let me know what else I should have included so that I can make sure and include it next time.

Encore - Memory Allocation Error - With Dynamic Link

CS4 using Vista
The process (AdobeEncore.exe *32) gets stuck at 959,736K while 6GB is available.
In the past I have built many DVDs using a Dynamic Link from Encore to Premiere Pro.
Now they all end in errors: Memory Allocation Error & Unable to Create Image Buffer.
I monitored the process in the Windows Task Manager.
The memory use for the (AdobeEncore.exe *32) process grows until it reaches 959,736K.
The memory use stops there but the process continues for a while and then Encore stops with the errors.
I guess is that (AdobeEncore.exe *32) has become limited to 1GB but the is plenty of memory available.
I can Import a file and make a DVD without using the Dynamic Link.
Thanks

Was probably a hardware issue.

Extremely slow PP Export with Dynamic Links

Similar Messages

Maybe you are looking for