Extremely slow video playback in CS6.

Premiere Pro CS6: Video in playback is extremely slow and usually sticks on an image for most of the clip, but sound is good. Is there something in my computer I need to change? eg processor?

More information needed for someone to help... please click these links and provide the
requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406
What are you editing, and does your project match your video?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen
shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Similar Messages

Slow video playback after reinstalling Geforce2 MX card

Ok, reinstalled (took out the 9200 card) my Geforce2Mx card and now everything is in super slow motion - video, scrolling, typing, opening and closing of apps, pull down menus, loading of web pages - everything. It's like being back on an old SE30 and now even that seems fast to what is happening now. What did I do wrong? Tried rebooting a few times and resetting pram with no better results.
G4 Mac OS X (10.3.9)
Posts: 536
From: Vancouver, Canada
Registered: Dec 30, 2005
Re: Slow video playback after upgrading to ati 9200 card
Posted: Apr 10, 2006 11:56 PM
in response to: G J
Press the button near the battery on your logic board, it will reset the PMU, which might help.
Gigabit Ethernet G4 upgraded 1.2Ghz, 120GB HD, 10GB HD, 1GB RAM Mac OS X (10.4.6) ibook G4 1.42Ghz, 80GB HD, 786 MB RAM, 1GB iPod Shuffle
Tried that also with no results. Also repaired permissions. What could have happened to the machine to do that?
G4 Mac OS X (10.3.9)

Installed the modified Radeon ATI 9600 Pro for G5 Edition card and I still have the same slow video playback results. However when I boot up from another internal hard drive I do not have the video problems. Everything works just fine. Both of my hard drives had no video problems before screwing around with the ATI cards and now the one still has the problems with the video playback. This one also has Classic on it and Classic also runs slow. BTW I don't know if this has anything to do with it but when I ran a search result for "ATI" no files are installed on that 2nd hard drive which is playing video and loading pages with no problems. Would trashing all those ATI files on the slow drive do anything to help? Or is this just a coincidence?

Slow video playback after upgrading to ati 9200 card

Just upgraded my graphics card to the PCI ATI 9200 but now I have slower video playback than I had with the OEM Geforce AGP card. Does anyone know why this has happened? I thought I was gonna get better playback by upgrading
G4 Quicksilver 733 896mb ram Mac OS X (10.3.9)

Hi,
Well, you have me scratching my head, that's a real puzzle.
Try an Open Firmware re-set, do the 're-set all' procedure:
http://docs.info.apple.com/article.html?artnum=42642
BTW, ATI (and OWC) has just released this info on their 9600 video card, meaning it's not so good for G4's:
Knowledge Base
ATI Customer Care > Product Information > Specifications, Features, Comparisons >
737-21888: Radeon 9600 PRO PC & MAC Edition list of supported system configurations
The information in this article applies to the following configurations:
Radeon® 9600 PRO PC & MAC Edition
"Quicksilver" Power Mac G4 model
"Quicksilver 2002" Power Mac G4 model
"Digital Audio" Power Mac G4 model
The Radeon 9600 Mac & PC Edition is not compatible with the "Quicksilver", "Quicksilver 2002" or the "Digital Audio" PowerMac G4. If a Radeon 9600 Mac & PC Edition board is installed in one of these systems the result is a blank display.
For assistance in differentiating Power Mac G4 models, please refer to Apple Article 58418.
Regards,
Dave

Slow video playback in Photoshop Elements 11

Playback of videos directly in Photoshop Elements Organizer is very slow. Video is stuttering.
Playing the same video outside of PSE11 with Windows Media Player is much better. Video plays without any stuttering.
Looks like the internal video player of PSE11 is very poor and provides slow performance.
What can I do do have the same video performance with the PSE11 player as I have with WMP.
I use Windows 7 64 Bit (8 GB RAM) with a Intel Core i3 (2330). This CPU has enough power to playback HD or Full-HD videos without any stuttering!!!
Why can't the internal play of PSE11 Organizer play my videos without stuttering - like WMP 12.0.7601.18150 does?
Regards,
Dodson65

The videos I use are created with different devices.
I have HD videos taken with a Pentax DSLR and I have Full-HD videos taken with a Windows Phone 8 device.
Both playback on my Laptop without any stottering with different software. I checked WMP and VLC. Even when using my Laptop with energy-saving profile these videos can be played without stottering.
When I playback the videos in PSE11 Organizer I don't want to edit them - just playback. So why should the internal player behave different? I agree with you - this might be different when I playback the videos in Premiere Elements 11 (as this is a video editing software). But when using Photoshop Elements 11 I want to be able to playback videos in the same performance as I can do with WMP or VLC. If Photoshop Elements 11 can't do that - why? The organizer of PSE11 is not an editor. It should be able to playback videos the same way (with the same performance) as other players on my laptop.
Can you please explain this sentence: "Have you started a Premiere Elements project yet that uses this video's specs? This will often trigger Premiere Elements to download the necessary components for interpretting the video." Is there anything I can do to improve video playback performance?

Slow video playback

Hello,
I previously had no problems playing videos in iTunes. Recently, however, video playback becomes choppy about 10 seconds in, while audio remains fine. This happens both with my own ripped videos and with iTunes Store videos, at 100% view (i.e., not fullscreen or anything). Looking at Activity Monitor, iTunes begins to eat up 90-105% CPU.
I only have a few apps running (e.g., Camino, iChat, Mail), and everything is responsive until iTunes starts chugging away, at which point my whole system slows down. Can anyone help shed some light on what is going on?

I've been having the same problem on my G4. I created a second user account and noticed that videos play perfectly there, just not in my normal account. I'm now trying to troubleshoot from there to see if it's some third party thing or widget or something that is the cause. Maybe someone else could try the same thing - create another account and see if that solves the problem - then go back and try troubleshooting their regular account. This seems like it could be a solvable problem to me at this point. Please post your results.

Flash 10 and PPC - slow video playback

Have an old PowerBook 12" running 10.5. Since upgrading to
Flash v10 the video playback is slow and sluggish to the point
Flash content is unusable. Tried to download a PPC specific version
but Adobe downloads gave me the Universal Binary once again. I
suspect v10 is buggy and is not supporting "Enable Hardware
Acceleration" on PPC so video is being scaled and processed by
software.
Anyone else having this problem? Anyone able to direct me to
good old v9?

Restarting might help temporarily, but for a more permanent solution you'd need a faster computer processor, a better video card, lots more RAM, and a faster hard drive. The sad truth of the matter is that technology advances so quickly that older computer hardware can't keep up with it. It would actually cost less to buy a new computer than it would to try to upgrade an older model. The iMac CRT's are still useful for many tasks, but they can't be expected to handle present-day multimedia.

Slow video playback in very high resolution X11

Hi everyone. I write this msg for ask your eternal knowledgement.
I have a very huge system (i7 3820 LGA2011, 8Gb quad channel, Gigabyte x79-up5-wifi, AMD HD5870 2Gb Eyefinity 6, etc) running Arch on it. The OS is updated. The Arch config is very minimal, using Fluxbox as WM and VLC and Mplayer to playback videos. The video driver is the latest stable Catalyst (13.4) and so on. I got connected six HD screens seted to a resolution of 1366x768. These screens are managed with xrandr, adjusted for considering the bezel compensation, using xrand --output MONITOR --pos X+BEZELxY+BEZEL.
When i play a video with mplayer (using the gl video driver) the movie shows very well and smooth, but when i pan the video all over de virtual screen (4194x1583 aprox), the movie shows very choppy.
The strange fact is the Conky reports shows me an 5% of CPU usage, so the system performance are not the problem.
The mplayer flags that i use to play this video are plenty, being the threads=4, gl:ati-hack and -root the most important.
If anyone can give me a hint to solve this issue, i would be very grateful.
thx in advance.

The videos I use are created with different devices.
I have HD videos taken with a Pentax DSLR and I have Full-HD videos taken with a Windows Phone 8 device.
Both playback on my Laptop without any stottering with different software. I checked WMP and VLC. Even when using my Laptop with energy-saving profile these videos can be played without stottering.
When I playback the videos in PSE11 Organizer I don't want to edit them - just playback. So why should the internal player behave different? I agree with you - this might be different when I playback the videos in Premiere Elements 11 (as this is a video editing software). But when using Photoshop Elements 11 I want to be able to playback videos in the same performance as I can do with WMP or VLC. If Photoshop Elements 11 can't do that - why? The organizer of PSE11 is not an editor. It should be able to playback videos the same way (with the same performance) as other players on my laptop.
Can you please explain this sentence: "Have you started a Premiere Elements project yet that uses this video's specs? This will often trigger Premiere Elements to download the necessary components for interpretting the video." Is there anything I can do to improve video playback performance?

Qosmio G20-139 slow video playback sound ok

Hi,
I no longer seem to be able to play video files, play DVDs, or watch TV as the playback is in slow motion but sound is ok except on the TV.
Have tried to uninstall Graphics driver but it won't let me saying something to the effect of unable to uninstall as required to boot.
Also looking into uninstalling /reinstalling Video driver but can't find what it is. Is it the same as the Graphics driver (NVIDIA Go Geforce 6600)?
This all started (i think) when i tried to use a netgear router insatllation CD but stopped it half way even though it said not to... Then whole system went incredibly slow and crashed a lot for a while (even Word, Excel and Powerpoint) but think some updates have sorted that out.. but it still doesn't seem to be able to handle too much going on at once like before... plus some site heavily using javascript have also gone ridiculously slow.
Besides using product restore CD as not to hand as moved to diff country... Any suggestions please????
OS: Window XP MCE
Regards,
Angela

Hi
> Also looking into uninstalling /reinstalling Video driver but can't find what it is. Is it the same as the Graphics driver (NVIDIA Go Geforce 6600)?
The display driver and the graphic driver is the same ;) some people call it display driver and some people say graphic driver
Im not quite sure why you are not able to watch movie files properly but possibly you would need some kind of codex.
The codec can be downloaded from different pages and many packages contains different codex.
Personally Im using N K-Lite Mega Codec Pack because it contains most necessary codecs.
I think its worth a try to install it!
Furthermore I recommend cleaning the OS using the CCLeaner its free tool and I had a good experience with it

Slow video playback with 2 sound tracks

Hi,
I've just been playing around with quicktime files with 2 sound tracks with different languages. When I copy these files to the ipod they playback, but in slow motion. Are there any guidelines for making ipod compatible 2 sound track files?
I know there are movies in the itunes store with two sound tracks with different languages and these are supposed to work OK with the ipod nano.
Any experiences? Thanks,
Robintosh

What software are you using to convert the videos to iPod format?
If you are using Quicktime Pro, or iTunes 6 to do the conversion... then that is most likely where your problem lies.
Your source video file is probably muxed.
Neither QT Pro or iTunes has the ability to successfully encode a muxed video file with audio. You'll end up with video and no audio.
http://docs.info.apple.com/article.html?artnum=302588
You'll need to use some other third-party software to do the conversion. There's a handful of software available. Just search the forums and you'll find many titles mentioned.
Try MPEG Streamclip.

Slow video playback - jerky video

Hi all. I'm having a problem with my Macbook. Its struggling to play Hi def videos either 720p or 1080p. This was never the case until very recently.The video are jerky and slow. I am aware that the majority of the issue is from the processor but like I said I never had this problem before.
I'm wondering if anyone else is experiencing similar problems and if they have solved it.

Hi Lyssa.
Unfortunately i don't have the original RAM Modules anymore. How would the additional RAM affect the playback speed? In addition to all this I am now in the Apple shop because my Mac won't go further than the pre login screen so I think the HD is gone. : (. The laptop has been relatively slow the last few weeks and this I think is the icing on the cake. I will let you know the outcome but appreciate the help.

Slow video Playback IMOVIE HD 5

I have been editing some of my videos on my IMOVIE HD 5.0.2 and lately the playback has been slow. I mean the audio will play fine and the visual has some catching up to do. And this only happens to some of the latest videos i have edited. Any cure for this?

Hi
+So how can i clean up the Start-up Hard Disk.+
To do this You can:
• Drop material that You'll never need any more into the trash basket
• Copy over other material to an external hard disk
If You need it for Video You Must and Should:
• Must format this hd as Mac OS Extended. UBIX/DOS/FAT32/Mac OS Exchange WILL NOT WORK
• Should be a FireWire hard disk - USB/USB2 performs badly
• When safely copied - delet from internal (start-up) hard disk
Empty trash basket - space is retrieved.
+What do i do next once i created a new user account? Log into where?+
Top left corner there is an Apple
• Go down this menu to Log-out and do that
• Log into the new account
• Have a re-try eg do a new project
Yours Bengt W

Aiport Extreme (N) & Video Playback

Hi there,
I have an external HD hooked up to my Airport Extreme base station. I have my iTunes library as well as some movies. When playing songs in iTunes wirelessly from the base station I do not have a problem, no loss, music plays smooth. However, when I play the movies in VLC media player, I get alot of lag with video & audio. It kind of pauses and drops for a second every now and then while watching. Is there something I can do in my configuration to make the movies play smooth like the music?

Does anyone have a solution to this problem?

ATI driver issues and slow video playback

I just reinstalled Arch and I installed the ATI drivers, at first I couldn't get them working but when I did, video in full screen was amazingly slow, so I tried installing ati-drivers-arch, as someone in the boards suggested but after that each time I start X, it would crash my computer, so right now I am using the standard vesa driver to even start X.
Also when trying to resize mplayer (while using -vo gl) it says my computer is too slow. And VLC has no speed issues but the quality of the picture is very poor.
I am running:
AMD Athlon 64 3200+
ATI Radeon X800 GTO
1.5 gb of DDR RAM
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "dell101"
Option "XkbLayout" "us"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2" # PS/2 Mouse
Option "Device" "/dev/psaux"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "ati"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 48.5
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-70
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "ati1"
Driver "vesa"
# unsupported card
VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "ati1"
Monitor "ati"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
A big thank you to anyone who can help!

It doesn't look like xorg 7 has been installed. The latest kernel 2.6.15 needs xorg 7, udev, and initrd .
I may be wrong but my xorg is much smaller in size and fonts are handled differently in the latest kernels.
Please see the blogs concerning the upgrades to the xorg 7 changes.

Slow Video playback on external monitor

I'm having a problem with video on an external monitor drifting out of sync. The video plays back slow on the monitor but the sound come through fine and the video is playing at a normal speed in FCP. This is only happening with video from FCP, I can play a clip in Color and there's no drift. I've opened the project on another mac and there's no problem. Also, if I set the external video play back to 10 bit the drift is worse than if it is set to 8 bit, as in a 15 sec clip takes 19 secs to play back on the external monitor at 10 bit and 18 secs in 8 bit (not exact times). I've reinstalled AJA LHe control panel and drivers, but seeing as this isn't happening in Color it seems like it must be a FCP issue. I've trashed the FCP prefs (along with AJA and quicktime), what could this be?!?

what video capture card are you using??
have you set render all to FULL, and have you rendered??

Slow video playback in iMovie 06

i can import video from my DV camera into iMovie 06 fine but when i try to watch it back it's very slow/jumpy but the sound remains normal. It almost looks as though only 2 or 3 frames are being played every second. I even formatted my mac to see if that would solve the issue but it hasn't. same problem!
please help!!
Jamie

I am having the same FREEEKN problem!!!!
My hard drive is 30% free. I used to make movies all the time. All of a sudden, in the middle of editing one, all this choppyness crap started.
Everyone keeps saying check your hard drive space or your RAM. Both are sufficient.
Mac wants us to use their products, but with this ****** reliablity, they are no better than Microsoft.
Someone help!!!

Extremely slow video playback in CS6.

Similar Messages

Maybe you are looking for