Extremely Sluggish Performance
After initially having MUCH trouble actually upgrading to Leopard, including the disabling of application enhancement software, I had to re-install using Archive and Install - I've worked with Windows and OSX for years and Leopard has been the most ill-prepared, poor quality upgrade procedure I've ever used.
Not only that, but the performance is awful on my 1.67Ghz PowerBook G4. Instead of being a step up, I've stepped down: It's much slower than Tiger, CPU usage bursting through the roof, meaning my laptop runs MUCH hotter, and much more sluggishly. Repairing permissions takes 20 minutes! What a joke!
Unless Apple can provide a solution, I'm wiping my drive and heading back to Tiger... unbelievable, it really is.
Please don't flame me for this, but I've noticed that bar one, everyone on this thread are mostly using G4's? Tiger was built on PPC architecture so it was optimised for that system. I seem to remember that the G4 powerbooks just before the went Intel had buss speeds of just 167MHz? The newer Core Duo 2 processors are now at speeds of 667MHz- quite a significant hike. So it's hardly surprising that you folks are having performance problems.
The crux of it, is that Apple want (and have) to sell computers (fair game), and I suppose also that they want you to upgrade to their faster chipsets too (and why not?- they really move!). Yes of course a PPC version of Leopard has been made available that will just work with older PPC based Macs so I suppose you can't really blame Apple for optimising Leopard for Intel chips can you?
I upgraded from a G4 500 Ti which for a good 5 or so years was a great computer with OS 9.2.2 running well and had a 'decent', if a little slow at times performance with OS X 10.3.9- but the speed was beginning to show when Tiger appeared and I had to throw away the Dashboard altogether because I then had to wait several minutes to get Dashboard working at all.
My recommendation is just to go back to Tiger for now until you can afford to upgrade to the Intel architecture. But the Intel Mac comes really recommended. These machines really do 'fly'. The screens are also so much better and brighter than those old G4 machines. Everything just works so much better.
Similar Messages
-
Extremely sluggish performance with Mavericks
Hardware Information:
MacBook Pro (13-inch, Mid 2010)
MacBook Pro - model: MacBookPro7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
OS X 10.9 (13A603) - Uptime: 34 days 8:53:54
Disk Information:
ST9500423AS disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (83.55 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information:
Apple Internal Memory Card Reader
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.rim.driver.BlackBerryUSBDriverInt (0.0.67)
com.nvidia.CUDA (1.1.0)
Startup Items:
CUDA: Path: /System/Library/StartupItems/CUDA
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] cn.com.zte.PPPMonitor.plist 3rd-Party support link
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.adobe.SwitchBoard.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.rim.BBDaemon.plist 3rd-Party support link
[System] PPPMonitord.plist 3rd-Party support link
Launch Agents:
[System] cn.com.zte.usbswapper.plist 3rd-Party support link
[System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[System] com.adobe.CS5ServiceManager.plist 3rd-Party support link
[System] com.nvidia.CUDASoftwareUpdate.plist 3rd-Party support link
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] com.rim.BBAlbumArtCacher.plist 3rd-Party support link
[System] com.rim.BBLaunchAgent.plist 3rd-Party support link
[System] Swapper.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
User Login Items:
iTunesHelper
Vodafone Mobile Broadband
VMCStatusMenu
Internet Plug-ins:
JavaAppletPlugin: Version: Java 7 Update 25 Outdated! Update
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
AdobePDFViewer: Version: 10.1.1 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.0.0 3rd-Party support link
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
CUDA Preferences 3rd-Party support link
Flash Player 3rd-Party support link
Growl 3rd-Party support link
Java 3rd-Party support link
Bad Fonts:
None
Old Applications:
Audacity: Version: 2.0.3.0 - SDK 10.4 3rd-Party support link
/Applications/Audacity/Audacity.app
/Applications/iWork '09
dynamiclinkmanager: Version: 6.0.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
SA Color Finesse 3 UI: Version: 3.0.6(275) - SDK 10.5 3rd-Party support link
/Applications/Adobe After Effects CS6/Plug-ins/Effects/Synthetic Aperture/(CF3 Support)/SA Color Finesse 3 UI.app
dynamiclinkmediaserver: Version: 6.0.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Adobe/Common/dynamiclinkmediaserver/1.0/dynamiclinkmediaserver.app
Time Machine:
Time Machine not configured!
Top Processes by CPU:
26% firefox
3% mds_stores
2% plugin-container
1% Dock
1% hidd
Top Processes by Memory:
467 MB firefox
61 MB Safari
33 MB WindowServer
29 MB System Preferences
29 MB plugin-container
Virtual Memory Information:
26 MB Free RAM
747 MB Active RAM
730 MB Inactive RAM
725 MB Wired RAM
16.74 GB Page-ins
1.61 GB Page-outsLaunch Daemons:
[System] com.rim.BBDaemon.plist 3rd-Party support lin
Launch Agents:
[System] com.rim.BBAlbumArtCacher.plist 3rd-Party support link
[System] com.rim.BBLaunchAgent.plist 3rd-Party support link
There may be other software that is causing your problem, but the Blackberry software regularly crops up as being the cause of slow-downs or unpredictable behaviour. Try uninstalling it using the uninstaller that is hopefully available from Blackberry.
Hopefully others will spot this thread and have some other suggestions. There are a few entries for things I've never heard of (not that that means much ), but there's a chance that they are not compatible with Mavericks and could be contributing to the sluggish performance. -
Extremely slow performance with Radeon HD 7870
Hi,
I am using a number of Adobe programs on my new Windows 8 64 bit system, with 16 gigs of ram, an Intel Core i5 2.67ghz, and AMD Radeon HD 7870 2 gig. All the programs (including After Effects and Illustrator) work very well with the exception of Photoshop CS6 64 bit, which has extremely slow performance with Use Graphics Processor enabled in my preferences (which Photoshop selects by default). If I turn off Use Graphics Processor, the slow performance vanishes. If I change Drawing Mode to Basic, there might be a slightly detectable improvement over Normal and Advanced, but it's still horribly slow. The refresh rate seems to be just a few frames per second. Everything is slow: brushes, zooming, panning, everything.
I've tried changing the settings I've seen suggested elsewhere: I switched Cache levels to 2, history states to 10, and tile size to 128k. No effect. Photoshop is currently at the default of using 60% of available ram. Efficiency has remained at 100% throughout all my tests. Also, this slow performance has affected me from the moment I installed Photoshop; it didn't crop up after previous good performance. The problem exists regardless of the size or number of documents I have open. Performance is still terrible even when I create a 500 x 500 pixel blank new canvas and try a simple task like drawing with the brush.
Photoshop is fully up to date, and so are my graphics drivers (Catalyst version 13.1). Any help would be greatly appreciated; at the moment performance is so bad in Photoshop that it's unusable with graphics acceleration enabled. Thanks in advance for replying.
Photoshop System Info:
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:14, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 2665 MHz
Built-in memory: 16379 MB
Free memory: 13443 MB
Memory available to Photoshop: 14697 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 2
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.2 AMD-APP (1084.4)
OpenGL Version: 3.0
Video Rect Texture Size: 16384
OpenGL Memory: 2048 MB
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: AMD Radeon HD 7800 Series
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Video Card Number: 2
Video Card: AMD Radeon HD 7800 Series
Driver Version:
Driver Date:
Video Card Driver: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: AMD Radeon HD 7800 Series
Video Card Memory: 2048 MB
Video Card Number: 1
Video Card: Microsoft Basic Render Driver
Driver Version: 9.12.0.0
Driver Date: 20121219000000.000000-000
Video Card Driver:
Video Mode:
Video Card Caption: Microsoft Basic Render Driver
Video Card Memory: 0 MB
Serial number: 90970078453021833509
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\RAFFAE~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 931.5G, 534.8G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
ACE.dll ACE 2012/06/05-15:16:32 66.507768 66.507768
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/09/10-12:31:21 5.0.4 79.517869
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 7.0.0.1686
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/06/05-15:16:32 66.507768 66.507768
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/06/05-15:16:32 66.507768 66.507768
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/06/05-15:16:32 66.507768 66.507768
BIBUtils.dll BIBUtils 2012/06/05-15:16:32 66.507768 66.507768
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.1.0.20577 2.1.0.20577
CoolType.dll CoolType 2012/06/05-15:16:32 66.507768 66.507768
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 2.1.2.1681
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
Required plug-ins:
3D Studio 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
Angled Strokes 13.0
Average 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.3
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Collada 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Embed Watermark 4.0
Entropy 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Extrude 13.0
FastCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Maximum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Mean 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Measurement Core 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Median 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Mezzotint 13.0
Minimum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
MMXCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Picture Package Filter 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Pinch 13.0
Pixar 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Range 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.1.2
Shear 13.0
Skewness 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
STL 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Sumi-e 13.0
Summation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
Underpainting 13.0
Vanishing Point 13.0
Variance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Variations 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
WIA Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Wind 13.0
Wireless Bitmap 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
ZigZag 13.0
Optional and third party plug-ins:
DAZ Studio 3D Bridge 12.0
DazUpdateScene 12.0
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONEGreat news!
I followed your suggestion, Noel, and uninstalled my drivers with the Catalyst Uninstall Utility (which I hadn't used before), rebooted, reinstalled Catalyst 13.2 Beta 7, rebooted, deleted the PS Prefs, started PS, and now the performance is radically improved!
It baffles me why I would need to do a clean driver uninstall in a new system environment that has only ever had this video card, and is only a few months old, but that action seems to be what's improved the situation. Note that because I deleted the PS preferences, the good performance now occurs with the default Use Graphics Processor enabled, and Drawing Mode set to Advanced (with every feature in the Advanced dialog checked except 30bit display).
Having no reference point, I can't tell for sure if performance is as good as it theoretically ought to be for my system specs, but using the standard 13px brush is only slightly laggy behind the cursor, even if I become reckless and squiggle on the canvas violently. It wasn't just sluggish response before: Photoshop seemed to be in pain trying to draw the line segments as it laboured to catch up to the cursor. That is pretty much gone now.
Much more tellingly, zooming and panning the canvas is like it ought to be, responsive and clean, more or less like it was for me in CS4 with my old Nvidia 9600GT. The poor performance with zooming and panning was the most worrying aspect of the issue. It's a great relief to see these working more properly now.
I have to confess I'm a little embarrassed to have drug you through all this hassle only to discover that something as rudimentary as properly cleaning out the drivers would be the apparent solution. I never would have imagined that doing that, with such a new and stable system, would make any difference, since I don't have a legacy of older drivers dotting my hard drive. In any event, I'm really grateful that you guys took the time to try to help me.
In the interest of completeness, here's the relevant portion of my system info after doing the reinstall steps I mentioned above:
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:14, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 2665 MHz
Built-in memory: 16379 MB
Free memory: 13680 MB
Memory available to Photoshop: 14695 MB
Memory used by Photoshop: 60 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 3.0
OpenGL Version: 3.0
Video Rect Texture Size: 16384
OpenGL Memory: 2048 MB
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: AMD Radeon HD 7800 Series
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Video Card Number: 2
Video Card: AMD Radeon HD 7800 Series
Driver Version:
Driver Date:
Video Card Driver: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: AMD Radeon HD 7800 Series
Video Card Memory: 2048 MB
Video Card Number: 1
Video Card: Microsoft Basic Render Driver
Driver Version: 12.100.17.0
Driver Date: 20130226000000.000000-000
Video Card Driver:
Video Mode:
Video Card Caption: Microsoft Basic Render Driver
Video Card Memory: 0 MB
As you can see, the Microsoft Basic Render Driver still appears as a Video Card in the list. This presumably has something to do with Windows 8, and I really don't know if its presence here is still a sign that my card is not being used to its optimal capability. I have a hunch that the slight lag that I am still experiencing with the brush when Use Graphics Processor is on -- totally absent with the acceleration turned off -- implies that Photoshop is still unable to take maximum advantage of my card. I would assume that the brush tool should be more responsive with acceleration on than off, in a rig without any issues, but that's just assumption on my part. If you turn off Use Graphics Processor on your systems, is the brush tool more or less responsive?
But again, panning the canvas with the hand tool is now extremely responsive, without any screen tearing or visible lag, and that's a massive improvement over the total meltdown of performance I was suffering from before.
Thanks again very much for your help. I'm grateful to all of you who took the time to chime in. -
Hello friends
My PC config is as follows:
OS: Win 7 64bit
CPU: Intel Core2Duo E4300 1.8GHz
RAM: 5GB DDR2
Graphics Card: ATi Radeon 4700 512MB DDR5
HDDs: 160GB, 250GB, 500GB (all SATA) and 80GB (IDE aka PATA)
AV: Avast
Firewall: Comodo
Lr installation: in a separate partition than the default "C:\" of 160GB one (but on the same physical HDD).
I am trying this version of Lr, but I find the performance is extremely sluggish. Mainly the problem occurs whenever a real time rendering is required, for example showing the mask overlay, or the noise and sharpening preview (which can be viewed by pressing Alt key while changing the respective slider). I do not use any other software while working with Lr. Compared to the minimum system requirement of Lr, I believe my PC's config (though old) is quite adequate, still why do I get so sluggish performance? Is there any settings that I should change in Lr to get better performance?
Please help me out.
Thank you.Hi SRoyC,
Well, I'm somewhat outside my area of expertise at this point, since what I'm saying is based on:
* reading
* adding 2 (from what I've gathered in forums), + 2 (related experience).
In otherwords I have no direct experience with i7 processors m'self.
But,
* I've seen a lot of posts of cpu utilization showing <50% cpu utilization (running Lightroom I mean) on souped up systems, and so far none showing >50% - not for more than a "microsecond" anyway.
and
I've read that even in gaming systems users are getting less bang from bucks out of money spent for cpus, past a certain point, these days..
In the old days, it was easy: operations were either bound by cpu or disk. Such is no longer the case, and I haven't kept up with modern CPU architecture well enough to understand or explain details, but you can't get much faster Lr performance by faster disk nor beefier cpus these days - there's some other bottle-neck(s)... - maybe somebody else understands better, but beware a lot of people talk like they know when they don't - they just know they know more than you do and have a good story line ...
So, my guess: i7 won't serve so much better than an i5 (or similarly priced AMD chip) that it would be worth sinking your money there even if it's tight, and so if i7 really expensive where you are, maybe money would be better spent elsewhere (or put in the bank..).. - just my guess... - may not even perform better at all, but as I said: I really dunno for sure...
To be clear: abnormally slow performance is almost always caused be some element in your system that is tripping up Lr (and when I say system: I mean it could be a byte in a data file too, as well as hardware/software..), and NOT due to system spec.
Often Adobe remedies by software changes, but still - until then you gotta trouble-shoot your system/files if you want it to run fast.
PS - I run an AMD Phenom II X4 965 (and SSDs for critical drives), and I get full core utilization (i.e. 100% utilization of all 4 cores, for short intervals anyway - most of the time <100%) and good performance - I've heard claims of faster performance, but I've also heard claims of a lot slower performance by people with beefier systems.
PPS - I just reviewed your current system and it is indeed under powered. I recommend at least 4 cores (6 would be better, dunno 'bout 8, for Lr purposes I mean), at least 3GHz (faster is generally better, but again: past a certain point the cpu will just be idle so no gain), at least 8GB RAM (12-16G if you can afford it, usually more ram than that won't help much if at all). If Lr not working optimally on such a system, then it's time to break out the trouble-shooting handbook...
To reiterate: I'm not sure if a 12-core, 5GHz system with 32GB ram would be significantly faster than a 6-core, 3.5GHz system with 12GB ram, maybe not any.
Also: most operations when Lr is lagging are not stressing the disk much (e.g. the time it takes Lr to read an entire raw file and/or catalog photo record is generally not the problem, so SSDs will help a little, but only a little - surprisingly little..). Granted, it depends on the operation - whole-catalog metadata consolidation: yes, but when editing a single photo in develop module - disk speed makes little difference (except a skosh when initially loading).
~R. -
Macbook Pro 2012 extremely sluggish and unresponsive
I have a 2012 MBP that I purchased new earlier this year that has been a real pain to use.
Spec:
2.3ghz quad core i7
4GB RAM
500GB HD
OSX 10.8.4
Activity monitor always looks like there is tons of CPU and memory available, but I get constant beach balling just switching folders in Finder or opening a new tab in Chrome. Waking the thing up after opening the lid sometimes takes 3-4 minutes.
Here is a screenshot of my Activity Monitor from a few minutes ago when it was acting extremely sluggish. I'm concerned that the page outs might be high? Any advice? Is it normal for these machines to act like this? My 2009 MBP that I replaced with this machine was never this bad...You need more RAM. You're swapping far too much to the hard drive so that you've so little 'free' RAM that I'm surprised that you can do much at all.
The two best RAM distributors are Crucial and OWC. OWC tends to be a bit more expensive, so I usually go with Crucial. Visit the Crucial website and click on the System Scanner tab - a small app will download. Run it and Crucial will give you the recommended upgrades for your model (which can hold up to 16GB of RAM).
Also see the X-Lab's Tuning Mac OS X Performance as well as Thomas Reed's Mac Performance Guide.
Good luck,
Clinton -
Sluggish performance in Windows 8.1
I'm observing very sluggish performance in Firefox on my Surface Pro using Windows 8.1 RTM. I can't quite track down what's going on, but some startups take as much as 10-12 seconds. Additionally, the overall browser performance is sluggish.
I've tried running in Safe Mode and it's still quite slow.Ok, tried running Nightly. Still seeing VERY poor performance.
-
Since upgrading to Leopard (on my MacBook Pro) Safari shows a very sluggish performance, page take over 10 seconds to load. I cleared the cache but the problem persists. Any ideas?
Have you guys ran REPAIR DISK PERMISSIONS? and Cleaned out the disk cache?
Have you tried to startup the computer and holding SHIFT down (old extensions off trick)?
See if problems persist after these things. Sometimes it's a 3rd party app or extension. I've seen these issues from all the freeware shareware stuff over the various versions of Mac OS X. -
Macbook Pro extremely sluggish with new Wi-Fi service on Lion
I just got new Charter wi-fi service, and my Macbook Pro with Lion is extremely sluggish when loading webpages. The speedtest is fine. Other Windows computers in the area seem to work fine.
Hello there, miwaford.
The following Knowledge Base article provides some great steps for troubleshooting Wi-Fi:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
MacBook Pro 13" Retina running 10.9.5 sluggish performance
My 13" Retina MBP 512GB/8GB RAM running 10.9.5 has been running very sluggish recently. Doesn't appear to be any obvious problems other than Adobe Flash crashes almost hourly while web browsing. Here is my EtreCheck report:
Problem description:
Sluggish performance
EtreCheck version: 2.1.8 (121)
Report generated February 27, 2015 at 10:32:28 AM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (Retina, 13-inch, Late 2013) (Technical Specifications)
MacBook Pro - model: MacBookPro11,1
1 2.8 GHz Intel Core i7 CPU: 2-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Battery Health: Normal - Cycle count 81
Video Information: ℹ️
Intel Iris
Color LCD 2560 x 1600
System Software: ℹ️
OS X 10.9.5 (13F34) - Time since boot: 1:28:24
Disk Information: ℹ️
APPLE SSD SM0512F disk0 : (500.28 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.42 GB (99.61 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 44
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/VirtualBox
[loaded] org.virtualbox.kext.VBoxDrv (4.3.12) [Click for support]
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.12) [Click for support]
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.12) [Click for support]
[loaded] org.virtualbox.kext.VBoxUSB (4.3.12) [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS5ServiceManager.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.zeroonetwenty.BlueHarvestHelper.plist [Click for support]
[not loaded] org.virtualbox.startup.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist [Click for support]
[not loaded] org.virtualbox.vboxwebsrv.plist [Click for support]
User Login Items: ℹ️
Flux UNKNOWN (missing value)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
BlueHarvest Application (/Applications/BlueHarvest.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.305 - SDK 10.6 Cannot contact Adobe
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30317.0 - SDK 10.6 [Click for support]
MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Growl [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
4% firefox
2% hidd
1% WindowServer
1% plugin-container
1% mdworker
Top Processes by Memory: ℹ️
593 MB firefox
163 MB ocspd
155 MB mds_stores
137 MB plugin-container
120 MB Microsoft Outlook
Virtual Memory Information: ℹ️
4.24 GB Free RAM
2.50 GB Active RAM
985 MB Inactive RAM
870 MB Wired RAM
787 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 27, 2015, 09:03:52 AM Self test - passed
Feb 26, 2015, 01:26:25 PM /Users/[redacted]/Library/Logs/DiagnosticReports/plugin-container_2015-02-26-13 2625_[redacted].crash
Feb 26, 2015, 01:11:03 PM /Users/[redacted]/Library/Logs/DiagnosticReports/plugin-container_2015-02-26-13 1103_[redacted].crash
Feb 26, 2015, 12:34:59 PM /Library/Logs/DiagnosticReports/firefox_2015-02-26-123459_[redacted].hang
Feb 26, 2015, 12:34:57 PM /Users/[redacted]/Library/Logs/DiagnosticReports/plugin-container_2015-02-26-12 3457_[redacted].crash
Feb 24, 2015, 06:46:27 PM /Library/Logs/DiagnosticReports/firefox_2015-02-24-184627_[redacted].hang
Feb 24, 2015, 06:46:22 PM /Users/[redacted]/Library/Logs/DiagnosticReports/plugin-container_2015-02-24-18 4622_[redacted].crash1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1266 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1 250 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n ...and %s more line(s)\n' '\nContents of %s\n '"${k[22]}"'mod date: %s\n '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n "$5" => "$3" (UID "$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<13;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') nextfile;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"9\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"10\f%@d\f%s\f%d\f%d\n\",@d);printa(\"11\f%@d\f%s\f%d\f%d\n\",@e);printa(\"12\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'G -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |fmfd|Goog|ksho|ndum|obso|realp|rned f|sandbox ex|/root" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,user/$UID} -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {Daemons,Agents}\ {load,disabl}ed {Admin,Root}\ access Stylesheet Library\ paths{,' ('{shell,launchd}\)} Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 31 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 32;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 83 114;j=$?;for i in 0 1;do ((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74;B7 11;B4 0 0 11;C3 23+2*i;D4 24+2*i 14 66+i 92+i;done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 29 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 84 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 67;A1 24 75 74;B3 23;A2 39 57 30;B3 24;B6 23 24 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Just wanted to throw in my vote for sluggish performance since installing OS X Lion in case any Apple engineers are reading. No problems with the fans or temperatures, but EVERYTHING is running so much slower. From Photoshop to Mail to opening my System Preferences. I’m even experiencing a slight delay typing this note.
Quad-core 3 GHz Mac Pro with 10GB 667 DDR2.Ha! Thanks for your candor and offer to help, Allan. I'll happily do whatever I can on my end. As I said, MP quad-core 3GHz, with 10GB 667MHz DDR2 ram. Hard drive is 1.5TB SATA (680 GB free, don't know speed). Graphics: NVIDIA GeForce 7300 GT with 256MB.
I'm a professional designer and spend most of my time in Adobe's CS5 suite. If I had to guess, I'd say simple operations like opening a large PSD file or a complex illustration take about 30-40% longer. Bridge takes probably 3X longer to render previews. Outside of CS5, the new animations that happen throughout (such as on OS dialog boxes and mail replies) are choppy and delayed. Opening Dashboard and System Prefs takes 5-10 seconds (previously was instant). And overall, I see a lot more of the beach ball when switching applications. An unexpected and unexplained 20-30 second wait when switching from Finder to Keynote, for example.
It's very frustrating and memories are surfacing of so many Apple-sponsored derisions of Windows users switching back to XP when Vista didn't cut the mustard.
Any help would be most appreciated. -
Airport Express and USB Hard drive and extremely slow performance
HI Guys,
I seem to having a lot of trouble with an Airport express and a Lacie 1TB drive. While I have solved several problems by updating firmware and enabling journalling on the Lacie, I am still having problems with extremely slow performance with my macbook, particularly using itunes and Firefox.
Any ideas and any further information needed?
Regards
BJDprivateBjdPrivate wrote:
HI,
I formatted it using the Lacie setup program for Mac and later enabled it for journalling using Disk utility. This seemed to solve a lot of the recognition problems I was having, however the I-Tunes and firefox performance is still atrocious. If I do Need to completely reformat it using Disk Utility, will I lose my files on the disk now?
not if you move them to a temporary location before you start.
yes, you are better of formatting the drive with DU. -
We are also experiencing extremely slow performance for RoboHelp projects under version control. We are using RoboHelp 11, PushOk and a Tortoise SVN repository on a Linux server. We are using a Linux server on our IT guys advice because we found SVN version control under Windows was unstable.
When placing a Robohelp project under version control, and yes the project is on my local machine, it can take up to two hours to complete. We are using the RoboHelp sample projects to test.
We have tried to put the project under version control from Robohelp, and also tried first putting the project under version control from Tortoise SVN, and then trying to open the project from version control in Robohelp. In both cases, the project takes a ridiculous amount of time to open. The Robohelp status bar displays Querying Version Control Status for about an hour before it starts to download from the repository, which then takes more than an hour to complete. In many cases Robohelp becomes unresponsive and we have to start the whole process again.
If adding the project to source control completes successfully, and the the project is opened from version control, performing any function also takes a very long time, such as creating a topic. When I generated a printed documentation layout it took an astonishing 218 minutes and 17 seconds to complete. Interestingly, when I generated the printed documentation layout again, it took 1 min and 34 seconds. However when I closed the project, opened from version control, and tried to generate a printed documentation layout, it again took several hours to complete. The IT guys are at a loss, and say it is not a network issue and I am starting to agree that this is a RoboHelp issue.
I see there are a few other discussions here related to this kind of poor performance, none of which seem to been answered satisfactorily. For example:
Why does it take so long when adding a new topic in RH10 with PushOK SVN
Does anybody have any ideas on what we can do or what we can investigate? I know that there are options for version control, but am reluctant to pursue them until I am satisfied that our current issues cannot be resolved.
Thanks MarkDo other applications work fine with the source control repository? The reason I'm asking is because you must first rule out that there are external factors causing this behaviour. It seems that your it guys have already looked at it, but it's better to be safe than sorry.
I have used both VSS and TFS and I haven't encountered such a performance issue. I would suggest filing it as a bug if you rule out that the problem is not related to external influences: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
Kind regards,
Willam -
Sluggish performance - Mac Mini and MBP?
I'm experiencing sluggish performance on my Mac Mini with Leopard (upgrade installation) when using the genie effect, expose, spaces, gadgets, 3d dock, etc. It's jerky, as if the animation is missing frames. Is it related to the graphics card? I also find my finder painfully slow opening folders.... Any other people experiencing this? Are there any solutions available?
Exactely the same here. I had to disable the 3D dock alltogether, admittedly not a big loss. Sluggishness seems to worsen with a 'complex' desktop picture (graphics card - texture issue?). Also, and most annoyingly, I find that text rendering seems to be much worse, e.g. look at the system menu with an all black or white desktop background. Or a SoulseeX window on top of some other (Carbon app with opacity set to 90% per default). This is a litte better if I set the display to a '2.2 Television gamma' (I have a 23" Cinema display). One thing that i will try is to boot back into 10.4 and see if it's just my imagination but I am pretty sure it's not.
-
Magic Mouse extremely sluggish when Time Capsule starts
Why is my Magic Mouse becoming extremely sluggish when Time Capsule is backing up my data? This is really frustrating, I even stopped backing up my computer because the mouse is becoming almost impossible to use as soon as Time Capsule starts...
I've heard stories of interferences between Bluetooth and Wi-Fi, can anyone confirm that and provide me with a way to solve the problem? Thanks in advance.UPDATE:
I think I've found a solution.... Though I'm a bit reluctant to post it already because I'd really like to see if it works over time... Anyway, here is the interesting post I found by Mr. Caliostro:
... sure, go into your Airport Utility application, inside Utilities inside Applications. Click on Manual Setup when your TC appears in the window. Click on the Wireless tab. You will find a pulldown menu there called Channel. Select your channel & Update your TC settings. I set mine to channel 1 to try it, & it made a tiny improvement. How close is your TC to your mac? Does the interference reduce if you ove further away? Perhaps swapping from 802.11g/n to 802.11n or vice-versa, may help? (depending if your setup can work on 11n-only). Perhaps switching from 2.5ghz to 5ghz or vice-versa may help? both 11n & 11g can work at 5ghz as well as 2.5ghz... Let me know how you go!
I set the 5GHz channel to 48 and the 2.4GHz to 1. Of course I changed these settings completely randomly since I don't know anything about these things but it actually seems to work pretty fine! No more sluggish mouse during Time Capsule back ups! -
Sluggish performance- hardware test?
How can I run a Hardware/performance test on my Mac pro 2008(early).
2X3 GHz Quad-Core Xeon.
I am getting very sluggish performance from Motion and Avid programs.
Honestly I saw very little performance increase compared to my old Quad PPC.
I installed 16 gigs RAM from OWC.
ATI Radeon HD 4870 and a eSATA video RAID.
By all accounts this machine should be cooking- but it doesn't.
I ran DW on the Boot drive- but I still have issues.
I have read so much praise for the 2008's as great machines- so I just don't understand why I get so many hang ups.Clone your drive (SuperDuper) so you have an exact backup image.
Question: did you migrate your apps from G5? It sounds like you did.
The nice thing about SuperDuper is it skips all the clutter (cache, temp, logs etc) and optimizes folder and free space.
Are you using drives from G5 that have not been reformatted?
I'm sure there are other things to look for under the hood.
Maybe you are looking for
-
Need to include Structures in SAP Query
Hi, I need to extract data of material master from a 3.1 System, where there is a Structure which contains my required information. How can i include the fields of the Strucutre into my query? thanks, Chintan
-
That covers it. t
-
Not allow to change PO price if an open GR exit.
Hi, In the standard system, the price can be changed after a GR is posted. In our process, we want to make sure that the GR has to be reversed first before changing PO price. Is there a way to disallow changing PO price if the open GR is existing? T
-
Multi counter plan schduling start date
Dear Experts, Anyone can clarify the following points to provide proper support to client. 1. we have created multi counter plan with cycle set contains of different target counter readings with logical condition OR. 2. Now users are recording the co
-
Windows 7 64bit Photosmart All-in-one C6380 Solution Center Issue
Finally stumbled on re-installing printer SW so I was able to bring up the Solution Center page after a week of effort. The problem is it errors out after clicking on the scan buttons for either pictures or documents with the following dialog box po