Extremely urgent!! Unrestoring backup. Please help...

Please help! I had made an old backup on my nokia 7310 and i accidently restored it and now my messages and contacts are lost! Please please tell me a way how to undo it! Thnx.

I'm afraid it can't be undone unless you made a backup just before restoring the old backup. If you did then it's just a question of restoring it.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

How to implement drop down list in WDP Abap....very urgent...please help me

Hi Gurus,
I wanted to implement the drop down list button in the WDP Abap interactive form. Once the users clicks on the drop down button, an RFC should be called and display the details under the drop down button. Please give me the logic with code. Its very urgent...please help me. Please note that it is in WDP Abap interactive forms. We are using NW2004S, ECC6.0.

Hello,
you have to use ZCI form to use DDLB in WD-ABA. The content of the DDLB has to be present at rendering time, there is no dinamic call when you click the "dropdown".
The attribut you map to the DDLB has to be an element with a value-set, and the value set has to contain the text / value pairs.
>> this will be displayed when you click the dropdown.
Best regards,
Dezso

I cant use the highlight, underline, or strikethrough function in a specific pdf file. The file isnt locked. I used to highlight texts from that file before the latest update. The problem occurs only with that file. Urgent need. Please help. Thanks!

i cant use the highlight, underline, or strikethrough function in a specific pdf file. The file isnt locked. I used to highlight texts from that file before the latest update. The problem occurs only with that file. Urgent need. Please help. Thanks!

Chester31,
Thank you very much for sharing your file with us! Now that we are able to reproduce the problem at our end, you may stop sharing the file on Acrobat.com.
Do you know when this problem (for not being able to add new highlight/strikeout/underline) has started? Did you update your iOS from 7.x to 8.0 recently?
We will continue investigating the problem and let you know what we find.
Thank you again for your help.

I just got the iphone 4s and my text messages are showing as urgent to others,please help me fix this

i just got the iphone 4s and my text messages are showing as urgent to others,please help me fix this

As ckuan said, there's no way to mark messages as urgent from the phone. So, either your carrier is doing something and you'll need to contact them or it't something on the other end. Is it just one person who's seeing your texts as urgent? Or everyone?

I lost my iphone 4 contacts even i dont have backup please help me.

i lost my iphone 4 contacts even i dont have backup please help me.

think you're in the wrong forum
this is appletv

Iernel panic plus extremely enlarged display screen, Please help urgent

I have verified that I had a kernel panic on this Tiger 10.4 Imac. It said to shut it down but that didn't help.
On top of that the magnification on the screen is about as high as it could go and its impossible to navigate/get bearings to even try to work on this.
Until I get the screen thing figured out I'm dead in the water so to speak. Maybe there is an easy way to reset the magnification but it escapes me what it is and I need help with that and the kernel panic.
I have a ton of research to do and I'm farther behind every day.
Please help thanks.

Were you able to figure the cause of the Kernel Panic and find reference to the activity
involving that problem within the Console logs, or the System Profiler> Software> logs?
Both locations would likely have some information, however cryptic & codified it may be.
Some kernel panics are caused by hardware issues; others can be caused by some
conflicts in software. And there are some which could combine both sources, as cause.
• Resolving Kernel Panics:
http://www.thexlab.com/faqs/kernelpanics.html
• Technical Note TN2063: Understanding and Debugging Kernel Panics
http://developer.apple.com/mac/library/technotes/tn2002/tn2063.html
Good luck & happy computing!

My iTunes continues to say "Security Code Invalid" when I know it is in fact correct. I can't update my apps or purchase anything and it's extremely frustrating. Someone please help with what to do?

Every time I go on my iTunes account via my iPhone or even my computer, I get notified that my security code is invalid. My account did this a while back, but I ignored it for a while and it eventually accepted my security code. It's not doing that now. It's been a week, I need to update my apps and want to be able to purchase whatever I want. It's extremely fruststing that it won't accept my actual card security code. Someone please help?

Is the address on your iTunes account exactly the same as on your credit card bill : http://support.apple.com/kb/TS1646 ?

Very Urgent...Please Help..Invoking Windows Applications

I capture the Windows Desktop screen and saved it as a .jpg file. I then display the .jpg file on frame ( whose size is that of the screen ). Now if i click on the frame, the corresponding Window's application should be invoked ( i.e if I click on the frame where the Start Menu is shown, then the Start Menu should be opened ). Please help me with the code for this. I will be forever indebted to the person who can help me. Iam in very urgent need of this help

Not so easy.A JPG file is a compressed map of a "picture",nothing more. So , You have to get a reference to an object of this map - You can't save to a simple file (JPG) and expect to do what you want to do.Think something else , not a simple snapshot.In Win98 you have a directory "Desktop" where are all of your icons , in Win2000 you have to search in "Documents and settings\User_name\" or something like this to find the same directory and get all icons.Therefrom look for "Properties" and find the path to execute the exe file.It must be something like this I think.Hope have been helpfull.

I can't delete my icloud backup, please help

i want to delete my 4s backup on icloud, because it occupied too many storage
but a message which said "this backup cannot be deleted because it is being used to restore another device, or a backup is currently in progress" always pop out and stop me from deleting it. i' ve been tring to delete it for the whole week, but can't figure out a way to solve this. i never use icloud to restore my devices, and i tried log out my account from my 4s, still couldn't work. please help!!

There is no way out.
Restart the restore procedure and make sure you are connected to the wall power adapter and have Internet connection.
Settings > General > Reset > Erase All Content and Settings.
At the end it will ask whether you want to restore, choose iCloud backup.

IPhone5 won`t restore backup. please help

Hello everybody. I just got my iphone5 replaced by apple a couple of days ago due to a few issues I had with my phoone and I have backed it up on my hp laptop before going to Apple and then I tried restoring the back-up to the new phone but it will not restore the backup, I just get this message after the back-up restoration " The settings for your Iphone have been restored.Please leave your iPhone connected.It will appear in the iTunes window after it restarts." and then a countdown from 10 begins and the message dissapears and my iPhone is basically set up as a new phone. Can somebody please help me and explain to me what am i doing wrong? I have restored a backup many times before successfully but this time it doesnt seem to be working. Thank you in advance for your help!

You won't be able to. Here's why:
Since both your phones are new, they likely had the newest iOS version installed. For AT&T it's 4.3.3; for Verizon it's 4.2.8.
Since the Verizon phone has a LOWER firmware number than AT&T phone, you cannot restore a Verizon phone (older firmware) from an AT&T (newer firmware) backup. You could, however, restore an AT&T phone from a Verizon backup since the AT&T phone has the same, or more recent firmware update.
No way around this. If you search this forum, you'll see many similar posts.
If you used your phone as intended, you shouldn't lose much data at all, other than perhaps some application data. Photos are stored on your computer in iPhoto (unless you didn't do as recommended and upload photos taken by the iPhone into iPhoto), contacts should be synched with Address Book so they should be on your computer. Your iTunes media (videos, music, podcasts, apps) should still be in iTunes ready to be synched onto your new phone.

Supplier Sites Interface errors out -- URGENT!! please help.

Hi All,
The log file has the following message when executing the supplier sites interface import program that errored out:
REP-1419: 'beforereport': PL/SQL program aborted.
I have searched Metalink where they said the Batch Size should be 1000 by default. I did the same but still did not work.
I have made sure that teh vendor_id, vendor_site_code, org_id combination is unique.
I am not sure why I am getting this record. I have to process around 300000 records. When I ran the import progam the first time, it errored out after processing 171000 records. Then when I ran the program again for new records(that were not imported) it errored out after processing 42000 records. I dod not know how to resolve this issue.
Please help!!
Swati

Please check if the following notes are applicable to the issue:
Note: 369443.1 - Supplier Sites Open Interface Import Errs With Rep-1419 Rep-1419
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=369443.1
Note: 369913.1 - Supplier Open Interface Import (APXSUIMP) Errors: Rep-1419
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=369913.1

!!!Very Urgent-Production Issue -Please help

Hello IDMers,
We are facing an issue in production, we updated the AD Process form yesterday. Two fields- Employee Type and Employee ID field in AD User Process form got refreshed for all existing users. Those two fields are empty now for all users.
But these fields have appropriate value in the Xellerate User Table for all users. Now I need to some how populate the Employee Type and Employee ID field for all employees from User Table to AD Process form.
for example: Consider an Employee called Peter- His emp type is Full Time and Emp ID is 100; which i have it in OIM User Table, but this user is provisioned with AD and now i will have to update his AD Process form so that these two fields are populated. I need to do this for all users in OIM. I guess the prepop adapter triggers only when the form is created for the first time. Please suggest me some ideas.
Is there a easy way to do this task?
What my thinking is, I need to have a scheduled task that basically loops through all users and updates their employee type and id field in AD User Form from Xellerate User Table.
Please help me with this as it is highly important.
Thanks again every one for your support all the while.
Regards,
~VSN

hey,
i was doing lots of migration from one OIM box to another during our last release. I guess something would have gone wrong while doing an import/export from one OIM system to another.
What I learned was while doing an import the vulnerable object is AD USER (or any resource of OIM) Object (both Process form and process definition), because those are the two objects which you need to import fully no matter how big a change you have done.
So when you do an import watch out for USER DEFINED FIELDS in the process form because for me the two fields which disappeared were user defined/custom created by me. So make sure you export the latest version;even if you didnt make any changes to them better create a new version copy of the form and then export it.
Hope that helps.
~VSN

I forgot the security question and e-mail backup Please help

I forgot the security question and e-mail backup Please help

If you don't know your rescue email address (you won't be able to view/change/add a rescue email address until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to view/change/add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Urgent...please help...lost my bbm icon when upgraded to bbm 7

hey,
i lost ill not showing my bbm icon when i upgraded the bbm to the 7 version..i tried hard resets and also teh show all option, but its still not showing. i also tried to download it from the app world, but its showing reinstall..and when i reinstall it..it shows reinstall failure..
i don't know what to do..please help me..asap..!!

DONT WORRY ,
GO TO OPTIONS > DEVICE > APPLICATION MANAGEMENT > DELETE BBM 7 > THEN REINSTALL IT AGAIN .
IF NOT WORKING ! LET ME KNW ON MA PIN . HAVE A GRT DAY .

Urgent!! Please help me burn to dual layer dvd!!

I've done a wedding video and I need to burn it to a dual dvd, using DVD Studio Pro!!
I've purchased Verbatim +R DL 2.4X
I've never had a problem burning signle layer dvds.
When I look at my system profile it says that I can burn dual dvds...
HL-DT-ST DVDRW GWA4080MA:
Firmware Revision: AE39
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: Insert media and refresh to show available burn speeds
When I try to burn my DVD I get an error that says:
"The recording device reported the hardware error: Unknown device error. (0x44, 0x90.)"
Please Help!!

I'm not familiar with that specific error but I would recommend using Toast to burn your disc if you have it. I have found much more success using that over DVDSP.
Another option would be to use Finder. Put in your blank disc, in Finder choose New Burn Folder, put your files in that window and burn.
Third, you could use Disk Utility to burn as well.
I hope this helps.

Urgent!! Please Help! Security Question!

I have forgotten the answers to my security questions (all three). As i made my Apple ID over 3 years ago, it did not ask me for a recovery e-mail adress. Is there any way i can reset the answers without the e-mail? Please Help!!

Welcome to the Apple Community.
ou should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

Extremely urgent!! Unrestoring backup. Please help...

Similar Messages

Maybe you are looking for