Extrememusic for input (optical) and Onboard audio for output (HDMI). Can this be do

I have a MB with onboard SPDIF for HDMI. When I install my extrememusic card it takes over and doesn't allow HDMI audio output anymore. But I want the extrememusic card for digital audio input (video capture) And the onboard audio for the SPDIFoutput (HDMI). Is there a way to use both the card and the onboard audio for these purposes?

It's quite hard to advice without having the equal system in hands.
Which one you have set to be as the preferred playback device and preferred recording device in system audio settings? Maybe onboard for playback and X-Fi for recording is maybe the way to go but, I can't say if this changes anything there?
X-Fi also has Audio Creation Mode which is maybe the best for this type input connection ... use bit-matched mode if possible and ASIO.
Depends on what you want to do there but, there are also some software you could use for to route signal from one card into other if this would be a sort of resolution (Virtual Audio Cable/Repeteater and Velbac comes into mind ... you should find links for these by searching this forum).
jutapa

Similar Messages

Hi I am attempting to use a Zed R-16 with Logic Pro 9, how can I setup a bounce for output 17-18 this is where the mixer sums (the audio outputs on the zed come through 17-18)

hi I am attempting to use a Zed R-16 with Logic Pro 9, how can I setup a bounce for output 17-18 this is where the mixer sums (the audio outputs on the zed come through 17-18)
I would like to be able to quickly bounce down my mixes, through the Zed outputs.

Pancenter...
Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
+1 on the UAD stuff....
Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
Thread 32:
0   libSystem.B.dylib
0x94c29afa mach_msg_trap + 10
1   libSystem.B.dylib
0x94c2a267 mach_msg + 68
2   ...tope.audioplugins.AU.Trash2
0x667bd57a catch_exception_raise + 250
3   libSystem.B.dylib
0x94c57259 _pthread_start + 345
4   libSystem.B.dylib
0x94c570de thread_start + 34
That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

HT5140 I did put another language in input source, and keyboard shortcut, but when I close this window, after opening the mail window, where do I see different language to click on?

I did put another language in input source, and keyboard shortcut, but when I close this window, after opening the mail window, where do I see different language to click on?

You switch keyboards by going to the " flag" menu at the top right of the screen.

HT1711 there is a youtube video, and i wish to locate the audio and place it on my ipod,can this be done?

there is a youtube video, and i wish to locate the audio and place it on my ipod,can this be done?

Syncing between iPhoto on your iPhone and iPhoto on your Mac is one-way. You can sync selected albums, events, faces, places albums from your Mac to iPhoto on your iPhone using iTunes. This will not delete any albums you created on your iPhone, just add new albums. But albums you create on your iPhone cannot be synced to your Mac.
See this page on how to transfer photos from iPhoto on your iPhone to your Mac:
http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnk7d8f763e

TS3274 My Ipad has a black background now and everything is color faded after the latest software update? I restored and reset the Ipad. How can this be fixed?

My Ipad has a black background now and everything is color faded after the latest software update? I restored and reset the Ipad. How can this be fixed?

How much data is being backed-up from each Mac? (see what's shown for Estimated size of full backup under the exclusions box in Time Machine Prefs > Options).
Is there any other data on your Time Capsule, besides the backups?
Most likely, there just isn't room. Time Machine may be trying to do a very large (or full) backup of one or both Macs, and can't. Since it won't ever delete the most recent backup, there has to be enough room for one full backup plus whatever it's trying to back up now, plus 20% (for workspace).
Also see #C4 in Time Machine - Troubleshooting for more details.

't' and 's' in font GFS Didot don't correspond to selected font size. 't' is too small, and 's' is too big. Can this be corrected?

't' and 's' in font GFS Didot don't correspond to selected font size. 't' is too small, and 's' is too big. Can this be corrected?
GFS Didot is nearest listed MUSE font in appearance to Adobe Caslon Pro, which is the font used in the book which the website is intended to promote. I would like to use Adobe Caslon Pro (I paid for it and it's on my computer, but not in the cloud). Is there any way to install Adobe Caslon Pro as a MUSE font choice in the cloud?

The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: 
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: 
https://addons.mozilla.org/en-US/firefox/addon/2592/

A login webpage gives the message "This script requires that jquery.js be loaded first." then will not show the user ID and password login boxes. How can this be corrected?

A login webpage gives the message "This script requires that jquery.js be loaded first." then will not show the user ID and password login boxes. How can this be corrected?

That message is listed in two scripts on the bank's site. One function that can display the message is named PhotoRotator and the other is named PromoRotator. However, I can't seem to trigger the error myself.
If you have any add-ons that alter the page, such as ad blockers, try creating an exception for these sites and see whether that helps:
www.northrim.com 
www.northrimbankonline.com
You also could try this logon page: https://www.northrimbankonline.com/onlineserv/HB/Signon.cgi
(''Obviously you should be cautious about links offered on public forums to ensure you are not being phished! Check them out carefully before entering your username and password.'')

I have s mac book pro--I would like very much to have the output to the DVI cable --my audio(sound) wilkl nit default to DVI output --How can this be changed

I have a mac book pro--I would like very much to have the output to the DVI cable --my audio(sound) wilkl nit default to DVI output --How can this be changed, so it does not default to interabnl speaker
Is there a way to force the system to change to DVI output?????
thanks a lot

Hi there,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
-Griff W.

Dropped my ipod and the glass face broke. Can this be replaced?

Droped my idpod and the glass face broke. Can this be replaced?

Click here > Apple - Support - iPod - Service FAQ

Audition CS6 and onboard Audio

I notice that the requirements for Audition CS6 contain a:
Sound card compatible with ASIO protocol or Microsoft WDM/MM
I did a search on here, and I saw that some people are using onboard audio for CS5.5, but I wasn't sure how cs6 would handle this? I'm not going to be doing intense audio editing - simply some of the ADR syncing tools and maybe filtering out background noise.
I attempted to check different motherboards to see if it said anything about the sound on the board being compatible with ASIO protocol or Microsoft WDM/MM, but no luck. It really doesn't appear too often, except when I look at sound cards in the $100+ range.
Any help would be appreciated. Thank You!

Yeah, Audition CS6 works fine with the driver type set to MME, then using an onboard sound interface (in my case, on my laptop, a Realtek). I'd never use it for any recording purposes but just for manipulating existing stuff I've yet to find a drawback--I do theatre work and sometimes do this for a quick edit or whatever without hooking up one of my external ASIO interfaces.
Actually, I just thought of one minor drawback--if you want to use the same session on two different sound interfaces, you have to reset the hardware set up screen each time you change--but this isn't a biggy and can be minimised by using "Save As" and a different name if it you don't need all the changes available in both places.

How to change the layout of an input file and write to an output file

Hi
I have a .csv file which has a layout as schoolNo. , county1,county2,county3,county4,county5
It will need to go into an output file as schoolNo. repeated and a county on each record .
ie., schoolNo.,county1
schoolNo.,county2
schoolNo.,county3
schoolNo.,county4
schoolNo.,county5
I wrote the java program as follows ..which results in this error
Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException
BECAUSE :--
i know bec., the first record doesnot have county3,county4,county5 . So when the if loop for county3 lenght is checked it gives this exception .
Pls help me write this program ..thanks in advance .
/Here I open the input file and read in record by record
          BufferedReader readin;
          try {
               readin = new BufferedReader(new FileReader(InFile));
               String firstLine = readin.readLine();
               String[] headers = firstLine.split(",");
               columnCount = headers.length;
               System.out.println("Columns in ZIP Master File: "+columnCount);
               for(String input ;(input = readin.readLine()) != null; ){
                    recCount++;
                    input = input.substring(1);
                    String[] column = input.split(",");
                    if(columnCount == 10){
                         eachIP++;
//                               OUTPUT FILE
                              if(column[1].length()> 0) {
                                   String mainStr = column[0] + "," + column[1] ;
                                   Count++;
                                   totalcolumns++;
                                   writeOutFile.write(mainStr);
                                   writeOutFile.newLine();
                              else{
                              bypassedCount++;
                              if(column[2].length()>0){
                                   String mainStr = column[0]+ "," + column[2];
                                   Count++;
                                   totalcolumns++;
                                   writeOutFile.write(mainStr);
                                   writeOutFile.newLine();
                              else{
                              bypassedCount++;
                              if(column[3]..length()>0){
                                   String mainStr = column[0]+ "," + column[3];
                                   Count++;
                                   totalcolumns++;
                                   writeOutFile.write(mainStr);
                                   writeOutFile.newLine();
                              else{
                              bypassedCount++;
                             }

There are two split( ... ) methods; check the other one (the one with two arguments), it allows for empty entries to be counted, i.e. split(inputString, -1) gives you the wanted results.

My iPad is showing I have 13.9G being used for "other" what can this "other" be?

I've noticed that my 64G storage is being used up by a mysterious "other" category. I have 13.9G of "other" on my device... what can this be?

Hi All,
I have been facing the same issue and found a solution that does not require a full restore!
Its seems to be related with the music synchronization mechanism
Here is a link to a very usefull documentation that describe what I did to resolve my issue!
http://www.ipodrepublic.com/iphone/fixing-issue-other-files-iphone-memory/2010/0 3/31/
Hope this help.

My husband and I share an ITunes account. He gets my apps and I get his. How can this be separated. I am also getting his contacts. My Icloud is turned off!

My husband and I share an I tunes account.
This was never a problem until I Cloud was born.
I have turned off the Icloud on my I phone4 all together.
He has Iphone 4S and is getting all the apps I purchase and I am getting his contacts.
How can this be solved. If I get my own Itunes account do I have to purchase my apps again?
Help!

If you use another iTunes ID you can keep your apps, but you need to do some settings first.
Read the hlep infos.
http://support.apple.com/kb/HT4895
I have purchased music, apps, or books with multiple Apple IDs. How can I get all of this content onto my iOS device? 
First, you need to copy all of your purchased content so it is on the same Mac or PC with iTunes. This computer should be the one you sync your device with. For more information on how to move your content, see these articles:
Mac: iTunes for Mac: How to copy purchases between computers
PC: iTunes for Windows: How to copy purchases between computers
Next, authorize your computer to play content with each Apple ID in iTunes. Once your computer is authorized for all your content, it can be synced to your iPhone, iPad, or iPod touch.
And about the iCloud, I'm not very sure about that. I think maybe you don't need to turn off all of the iCloud settings, just the items you don't want to sync with your husband. For the apps, you can cancel 'automatically download purchased items' in the settings on iOS devices.
May these informations will help you.
JHinSel

Firefox will not open until Windows Firewall has opened at startup. A slow process and slows Firefox in Starting. Can this be corrected?

Since installing Firefox the start up time for the computer has greatly increased as Windows Firewall has to be started before Firefox can open. Very annoying and can this problem be corrected?

Firefox does this for security purposes. I do not recommend attempting to "fix" this.
To boost starting time, you can try a Firefox preloading software.
WARNING: Always use caution when downloading content from the internet. I will take no responsibility for any damage caused by a download. Download at your own risk!

Ipod nano...and now getting the ipod touch, can this be done ?

on our pc I have itunes for my ipod nano....hubby is getting an ipod touch but will be using his laptop to set up a new itunes
can we use each others itunes for downloading some music ? what I mean is
PC has loads of golden oldies
LAPTOP will have lots of new downloads
can the iphone be used on the PC and the LAPTOP and have all the music from both itunes, or will it be one or the other ?
thanks in advance

*.its not giving me any option to take songs from the nano on to my laptop itunes,*
That would be correct, iTunes will only give you the facility to copy your iTunes Store purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
For everything else (music from CDs, other downloads and including iTunes purchased songs and in some cases, videos and games) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. You can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
A selection of iPod to iTunes utilities:
TuneJack Windows Only (iPhone and iPod Touch compatible)
SharePod Windows Only (iPhone and iPod Touch compatible)
iPod2PC Windows Only
iDump Windows Only
YamiPod Mac and Windows
iPod Music Liberator Mac & Windows
Floola Mac & Windows
iPodRip Mac & Windows (iPhone and iPod Touch compatible)
iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
iGadget Mac & Windows (iPhone and iPod Touch compatible)
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)

Extrememusic for input (optical) and Onboard audio for output (HDMI). Can this be do

Similar Messages

Maybe you are looking for